Xhci совместимый хост контроллер usb windows 10

Jun. 23, 2022 / Updated by
Bessie Shaw to
Windows Driver Solutions

“I just upgrade to Windows 10 from Windows 7 and I find that the USB xHCI Compliant Host Controller cannot start (code 10). None of my USB 3.0 ports work. I’m currently using a CM6850 Mobo. Does anyone else have this issue or know a fix?” – Quoted from Windows Community

Are you also troubled by USB xHCI Compliant Host Controller error code 10? Don’t panic. You are not alone. Here are top two effective methods to help you deal with this error. Read on to get them.

Read Also:

• Top 4 Ways to Fix USB Not Working after Windows 10 Update

• How to Fix USB Device Not Recognized Issue after Windows 10 Anniversary Update

Method 1. Run the Troubleshooter to Get Rid of Error Code 10

When the error code 10 occurs, it usually indicates that there are unspecified driver or hardware problems on your computer. To get rid of this error, the first method you can try is to run the troubleshooter. Take these steps:

Step 1. Type “Troubleshoot” into the search bar and click on Troubleshoot in the search result.

Step 2. Scroll down to find Hardware and Devices.

Step 3. Click on Hardware and Devices and select Run the troubleshooter.

Картинка с сайта: www.drivethelife.com

The troubleshooter will detect and fix the error automatically. You just need to wait a few minutes.

Method 2. Reinstall or Update the USB xHCI Compliant Host Controller Driver

In most cases, the corrupted or outdated USB xHCI Compliant Host Controller driver should be blamed for the error code 10. If the driver is corrupted or outdated, the device cannot start normally. Therefore, to fix the error code 10, you can try to reinstall or update your USB xHCI Compliant Host Controller driver.

Read Also: 2 Ways to Update Outdated Drivers in Windows 10

To resolve driver issues, it’s highly recommended to use a reliable driver update utility. Reinstalling or updating drivers via a driver update utility will be more efficient and less time consuming than reinstalling or updating drivers manually. Driver Talent can be your best helper in this regard. If you haven’t installed it on your computer, click on the Download Now button below to grab it right now.

Download Now

Then you can follow the guide below to resolve the error code 10 easily.

If you want to reinstall the USB xHCI Compliant Host Controller driver, you need to uninstall it in the Device Manager first. Do like this:

Step 1. Right click the Start button and select Device Manager to launch it.

Or you can type “devmgmt.msc” into the Run box and hit Enter to open it.

Step 2. Find Universal Serial Bus controllers in the device list and click it to expand. Then find USB xHCI Compliant Host Controller under it. Right click on USB xHCI Compliant Host Controller and select Uninstall from the pop-up menu.

Картинка с сайта: www.drivethelife.com

Step 3. Select OK when asked to confirm the uninstallation.

After uninstall the USB xHCI Compliant Host Controller driver completely, now you can use Driver Talent to reinstall it.

Step 1. Launch Driver Talent and click the Scan button to perform a full scan on your computer. Then Driver Talent will detect the missing of the USB xHCI Compliant Host Controller driver and will recommend you to download and install it.

Картинка с сайта: www.drivethelife.com

Step 2. Click on the Download button in the right of the driver. After the download is completed, click on the Install button to install it.

Step 3. Reboot your computer to let the change take effect.

If you want to update the USB xHCI Compliant Host Controller driver, do as follows.

Step 1. Launch Driver Talent and click the Scan button to perform a full scan on your computer. Then all the iffy drivers will be listed, including the outdated ones.

Step 2. If the USB xHCI Compliant Host Controller driver is detected as outdated, click on the Update button in the right to update it.

Картинка с сайта: www.drivethelife.com

Step 3. Reboot your computer.

Those are the top two methods to fix USB xHCI Compliant Host Controller error code 10. If you have any other good ideas, you can share them with us in the comment section below. Any comments will be much appreciated. For more solutions to other computer issues, you can get to the Resource section on this site.

Recommended Download

Through this article, we look at the methods you can use to download and install the updated driver for your Windows 11/10 USB xHCI Compliant Host Controller. 

USB xHCI Compliant Host Controller is a computer interface defining a registry-level description of Universal Serial Bus (USB), enabling the USB ports to communicate with the connected devices. However, it may not function properly, and you may encounter various USB-related issues if there is no USB xHCI Compliant Host Controller driver on your computer.

Hence, this article shares the best possible methods to download the USB xHCI Compliant Host Controller driver, install, and update it. Let us proceed toward them without any further ado.

Methods to Download, Install, and Update the USB xHCI Compliant Host Controller Driver

You can follow these methods to download and install the required driver to prevent problems, such as USB xHCI Compliant Host Controller Code 10 errors.

Method 1: Download the USB xHCI Compliant Host Controller driver from the manufacturer’s website

Like all other drivers, you can find and download the updated driver for Windows 10/Windows 11 USB xHCI Compliant Host Controller from the PC manufacturer’s website. However, you should first know your device’s operating system. You can follow the directions Settings>System>About. After noting the required details, you may follow the below steps to get the needed driver.

• Firstly, go to your PC manufacturer’s official website.
• Now, search for your device’s model.
• After you have found your device, go to its driver download page.
• Now, you can find the USB xHCI Compliant Host Controller driver for Windows 10/11 and select the option to Download it.
• Lastly, double-click the downloaded file and follow the on-screen instructions to complete the driver installation.

Also Read: Download SM Bus Controller Driver for Windows 10, 11

Method 2: Use Device Manager to Download the Driver for USB xHCI Compliant Host Controller

Device Manager in Windows is a tool to download and install the required drivers. This method to download the driver looks convenient. However, it is time-consuming, and you need technical knowledge to install the correct drivers on your computer. Hence, it is not a highly recommended method if you do not have the required knowledge. Still, you can follow these steps if you feel comfortable enough downloading the Windows 11/10 USB xHCI Compliant Host Controller driver from Device Manager.

Method 3: Update Windows to Download the Windows 10/11 driver for USB xHCI Compliant Host Controller

You can update your computer’s operating system to download and install the generic USB xHCI Host Controller driver. However, Windows may sometimes be unable to download the latest driver if the driver is newly released. You can still try your luck by following these steps.

Method 4: Download the USB xHCI Compliant Host Controller Driver Automatically (Recommended)

Above, we looked at all the manual methods to download, install, and update the USB xHCI Compliant Host Controller driver. As you can see, they all have their respective demerits. Hence, we suggest downloading and installing drivers automatically via Bit Driver Updater to prevent the installation of wrong drivers and resultant damage.

The Bit Driver Updater is one of the best driver update tools that download and install updated drivers on your computer automatically with one click. Moreover, it offers a lot of benefits, such as backup and restoration of existing drivers, driver download speed acceleration, scheduled scans, and more.

You can download and install this incredible software from the following link.

After downloading and installing the Bit Driver Updater, you need to wait for a couple of seconds for the software to scan your computer. Once the scan completes, you can Update All drivers automatically with one click on the button to do it.

Картинка с сайта: www.techpout.com

You can also update the USB xHCI Compliant Host Controller driver individually using the Update Now button. However, updating all drivers ensures smooth PC performance at all times.

USB xHCI Compliant Host Controller Driver Downloaded and Installed

This article discussed the best possible methods to download, install, and update the Windows 10/Windows 11 USB xHCI Compliant Host Controller driver. You can follow any method you are comfortable with.

However, in our opinion, it is a wise decision to update drivers through Bit Driver Updater to avoid all possible hassles. If you know any other more appropriate way to download and install driver updates, have any questions, or have any suggestions about this article, please feel free to write us a comment.

Suppose you’ve opened your computer and noticed that the ‘USB xHCI Compliant Host Controller’ isn’t starting. Consequently, none of the USB ports could work. So, what to do now?

You can fix “XHCI USB host controller is not working” issue in Windows 10, you have to run the “Hardware and Devices” troubleshooter, uninstall the “USB xHCI” driver, or disable the “USB selective suspend setting”.

If you don’t know how to troubleshoot the mentioned issue, no need to be worried. All the possible solutions to this problem are contain in this article. By following the fixes, you will get rid of the error.

Картинка с сайта: wingeek.org

Before we move to the solution, we need to understand what USB xHCI Compliant Host Controller is.

xHCI as known as eXtensible Host Controller Interface is a computer interface specification that –

• Polls the devices using a polling interval determined by the device,
• Defines a register-level description of a host controller for Universal Serial Bus (USB),
• Directs the USB bus

If USB xHCI stop working, individual devices will be unable to arbitrate for the bus. Means, the interfacing between the device and USB 1. x, 2.0, and 3. x compatible devices will be stopped.

What to Do If ‘USB xHCI Compliant Host Controller’ Cannot Start

There are a couple of fixes that you can apply from your side to solve the error. I compile the fixes in detail. Before diving into the deep, let’s take a glimpse of the list first.

• Fix 1: Run ‘Hardware and Device’ Troubleshooter
• Fix 2: Check for Available Windows Update
• Fix 3: Reinstall the driver
• Fix 4: Disable ‘USB selective suspend setting’
• Fix 5: Customize Registry Editor

Fix 1: Run ‘Hardware and Device’ Troubleshooter

‘Hardware and Device’ Troubleshooting can be the first choice to fix the error you face. But, you may not run the troubleshooter like the usual troubleshooting process. Here I brief the process step by step below.  

Step 1

Right-click on the ‘Start’ menu. You have to find the ‘Windows PowerShell (Admin)’ option from here. While finding the option, click on it.

Step 2

Consequently, the Windows PowerShell administrator command prompt will appear on the screen. You need to copy the below command and paste it into the prompt. 

‘msdt.exe -id DeviceDiagnostic’

Картинка с сайта: wingeek.org

In the end, you have to hit the ‘enter’ button. 

Step 3

As a result, the ‘Hardware and Devices’ troubleshooter will become evident. You have to click on ‘Next’ to execute the troubleshooting. 

Картинка с сайта: wingeek.org

Step 4

It may take several seconds to detect problems. So, you have to wait for a while.

Картинка с сайта: wingeek.org

Step 5

After the diagnosis, you will get two options. Either you have to choose the ‘Apply this fix’ option to solve the error automatically. Or choose ‘Skip the fix’ to apply the finding manually and continue the troubleshooting.

Картинка с сайта: wingeek.org

Step 6

After finishing the process, you will receive a confirmation message. Then follow the on-screen command according to the troubleshooting result.

Картинка с сайта: wingeek.org

If the problem still exists, you will move to the next fix.

Fix 2: Check for Available Windows Update

Windows update will be another fix you can try to resolve the error. I will describe the way below.

Step 1

Firstly, press the Windows and ‘I’ keys together to access the ‘Settings’ window. After that, scroll down to the bottom and select the ‘Update & Security’ section. 

Картинка с сайта: wingeek.org

Step 2

Then look at the left sidebar of the newly appeared interface and click on the ‘Windows Update’ option.

Step 3

Next, give your concentration on the right sidebar. Here you will get the ‘Check for updates’ option. You have to click on it to check the availability of Windows updates. To apply this, you need an internet connection. 

On the other hand, if your PC always has an internet connection, Windows will automatically download the update. And complete the installation. But, if you stop the update download option, you will have to do it manually.

Check the problem after updating the Windows. If this system issue does not solve the error, you need to apply some settings and driver-related fixes.

Fix 3: Reinstall the Driver

You can reinstall the problematic driver to solve the error. To do that, you have to uninstall it first. The process will be given below.

Step 1

Right-click on the ‘Start’ menu again. This time you have to find ‘Device Manager‘ from the newly appeared interface. While you see the category, click on it.

Step 2

Consequently, the ‘Device Manager’ window will be visible. You need to scroll down to the bottom. Here you will get the ‘Universal Serial Bus controllers’ option. Expand it.

Step 3

Then you will find the problematic USB device. You have to right-click on it. As a result, the ‘Uninstall device’ option will be visible inside the newly appeared interface. Click on it.

Картинка с сайта: wingeek.org

Step 4

After that, you have to restart the PC.

Step 5

Next, you have to download the Windows 10 display driver from the PC manufacturer’s website. Then install the driver by following the on-screen direction. 

Finally, check the problematic device. If the error still exists, you need to follow the next one. 

Fix 4: Disable ‘USB selective suspend setting’

Windows system has the ‘USB selective suspend setting’ option. You may need to disable it to fix the error we discuss. I will describe the disable process below. 

Step 1

Tap the Windows key and type ‘edit power plan’. As a result, you will get the same-named ‘Control panel’ on top of the newly appeared interface. You have to click on it.

Картинка с сайта: wingeek.org

Step 2

Then you will see the ‘Edit Plan Settings’ window. Look at the left bottom and click on the ‘Change advanced power settings’ option.

Картинка с сайта: wingeek.org

Step 3

Consequently, the ‘Power Options’ window will become evident. You have to scroll down to find the ‘USB settings’ section. While finding it, you need to click on the plus icon box. 

Картинка с сайта: wingeek.org

Step 4

Next, the ‘USB selective suspend setting’ option will be visible. You have to disable it. To do so, toggle down the dropdown menu and select ‘Disabled’. Here you will get two categories. One will be ‘On battery’, and the other will be ‘Plugged in’. You have to choose ‘Disabled’ for both.

Step 5

In this step, you need to confirm the submission. To do so, tap the ‘Apply’ tab and press ‘Ok’ at the end.

Картинка с сайта: wingeek.org

Finally, restart your PC and check the existence of the error. If still, you face it somehow, you will need to follow the last fix.

Fix 5: Customize Registry Editor

The last option you can try will customize ‘Registry Editor’ to fix the error you still face. The full process will be given below.

Step 1

Firstly, tap the Windows and ‘R’ keys together. As per the command, the ‘Run’ window will become evident. Type ‘regedit’ into the ‘Open’ box and click on ‘Ok’.

Картинка с сайта: wingeek.org

Step 2

Consequently, the ‘Registry Editor’ will appear on the screen. Then copy the below direction and paste it on the address bar. 

‘Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBXHCI’

Картинка с сайта: wingeek.org

After that, you have to hit the ‘enter’ button. 

Step 3

Next, look at the right sidebar of the window. You need to right-click on the blank space. Then expand the ‘New’ section and choose ‘DWORD (32-bit) Value’.

Картинка с сайта: wingeek.org

Step 4

Here you have to rename the newly created DWORD as ‘DisableSelectiveSuspend’. Then double-click on it.

Step 5

As a result, you will get the ‘Edit DWORD (32-bit) Value’ window. Here you need to put ‘1’ into the ‘Value data’ box. Select the ‘Hexadecimal’ as the ‘Base’. And then click on ‘Ok’ at the end. 

Картинка с сайта: wingeek.org

Finally, close the ‘Registry Editor’ and check the error. Hopefully, you won’t face the problem anymore. 

Final Words

In addition, I assume that you will get a fruitful direction by applying fix no. 1 while the ‘USB xHCI Compliant Host Controller’ Cannot start. Then you can follow fix no. 2, 3, and 4 one after another until you solve the error. Furthermore, you need to apply fix no. 5 rarely.

USB XHCI Driver by Microsoft Corporation.

This service also exists in Windows 11 and 8.

Startup Type

Default Properties

Default Behavior

The USB xHCI Compliant Host Controller service is a kernel mode driver. If USB xHCI Compliant Host Controller fails to start, the error is logged. Windows 10 startup proceeds, but a message box is displayed informing you that the USBXHCI service has failed to start.

Dependencies

USB xHCI Compliant Host Controller is unable to start, if the USB Host Support Library service is stopped or disabled.

Restore Default Startup Type of USB xHCI Compliant Host Controller

Automated Restore

1. Select your Windows 10 edition and release, and then click on the Download button below.

2. Save the RestoreUSBxHCICompliantHostControllerWindows10.bat file to any folder on your hard drive.

3. Right-click the downloaded batch file and select Run as administrator.

4. Restart the computer to save changes.

Note. Make sure that the USBXHCI.SYS file exists in the %WinDir%\System32\drivers folder. If this file is missing you can try to restore it from your Windows 10 installation media.

Yea, though I walk through the valley of the shadow of death, I will fear no evil: for thou art with me; thy rod and thy staff they comfort me.