@Jarda
from you description of your laptop APU Processor you must have a A8-4500M with HD7640G Integrated Graphics.
You are in the same boat as a couple of other Users here.
Your APU Processor’s last AMD Driver is from 2015/2016 but your R5-M230 last AMD Driver is from 06/2021.
Your Discrete R5-M230 driver from 2021 ISN’T COMPATIBLE with your HD7640G from your APU processor.
You are basically forced to install the last AMD Drivers from 2015/2016 which are compatible with both the Integrated and Discrete GPU cards.
If you still get code 43 after installing Lenovo AMD driver for your laptop than I suggest you run Lenovo’s Diagnostic software and see if it comes up with anything abnormal.
Last HD7640G driver: https://www.amd.com/en/support/apu/amd-series-processors/amd-a8-series-apu-for-laptops/a8-4500m-rade…
Last R5-M230 AMD Driver: https://www.amd.com/en/support/graphics/amd-radeon-r5-series/amd-radeon-r5-200-series/amd-radeon-r5-…
Check the Release notes for the R5-M230 and see if your HD7640G is listed as being compatible.
elstaci
Applies ToWindows 10
Эта ошибка возникает, когда драйвер устройства графики уведомляет Windows о том, устройство не работает надлежащим образом. Это может указывать на проблему с оборудованием, сбой драйвера или программного обеспечения драйвера. Чтобы устранить эту ошибку, выполните следующие действия.
Обновления драйверов для Windows 10 и многих устройств (например, сетевых адаптеров, мониторов, принтеров и видеоадаптеров) автоматически скачиваются и устанавливаются с помощью Центра обновления Windows. Хотя, возможно, вы уже установили последний драйвер, если возникают проблемы с устройством, можно попытаться их устранить, обновив драйвер.
-
Нажмите и удерживайте (или щелкните правой кнопкой мыши) кнопку Пуск, а затем выберите диспетчер устройств.
-
Найдите в списке устройство, с драйвером которого возникли проблемы (обычно рядом с ним отображается желтый восклицательный знак). Затем нажмите и удерживайте (или щелкните правой кнопкой мыши) устройство и выберите Пункт Свойства.
-
Перейдите на вкладку Драйвер и выберите команду Обновить.
-
Выберите пункт Автоматический поиск обновленных драйверов.
Если найдено обновление драйвера, оно будет установлено автоматически. После завершения установки нажмите кнопку Закрыть .
Если Windows не найдет новый драйвер, можно попытаться его найти на веб-сайте изготовителя устройства и выполнить инструкции по установке.
Если недавно было установлено обновление системы, драйвера устройства или ПО драйвера, вы можете устранить эту проблему, выполнив откат драйвера до предыдущей версии.
Примечание: Windows 10 устанавливает драйверы автоматически, поэтому вам не придется самостоятельно выбирать, какие обновления необходимы. В редких случаях определенный драйвер может вызывать временные проблемы на устройстве. В этом случае можно предотвратить автоматическую переустановку проблемного драйвера при следующем обновлении Windows, выполнив откат к предыдущей версии.
-
Нажмите и удерживайте (или щелкните правой кнопкой мыши) кнопку Пуск и выберите диспетчер устройств.
-
Найдите в списке устройство, с драйвером которого возникли проблемы (обычно рядом с ним отображается желтый восклицательный знак). Затем нажмите и удерживайте (или щелкните правой кнопкой мыши) устройство и выберите Пункт Свойства.
-
Перейдите на вкладку Драйвер и выберите Откатить.
В некоторых случаях удаление и переустановка драйвера устраняет .
-
Нажмите и удерживайте (или щелкните правой кнопкой мыши) кнопку Пуск и выберите диспетчер устройств.
-
Найдите в списке устройство, с драйвером которого возникли проблемы (обычно рядом с ним отображается желтый восклицательный знак). Затем нажмите и удерживайте (или щелкните правой кнопкой мыши) устройство и выберите Удалить > ОК.
-
После удаления драйвера нажмите и удерживайте (или щелкните правой кнопкой мыши) имя компьютера (находится в верхней части списка устройств) и выберите Проверить наличие изменений оборудования. Это позволит переустановить драйвер устройства.
-
Чтобы проверить, исправлена ли проблема, снова нажмите и удерживайте (или щелкните правой кнопкой мыши) имя устройства. На вкладке Общие в разделе Состояние устройства должно появиться сообщение «Это устройство работает правильно». Если вы не видите это сообщение, ознакомьтесь с документацией по устройству или обратитесь к производителю.
Нужна дополнительная помощь?
Нужны дополнительные параметры?
Изучите преимущества подписки, просмотрите учебные курсы, узнайте, как защитить свое устройство и т. д.
Jun. 23, 2022 / Updated by
Helia to
Windows 10
How to fix the AMD Radeon graphics error 43 in Windows 10? The AMD Radeon graphics cards, like other graphics card on Windows 10, is never free from errors. The AMD Radeon graphics error 43 is a kind of AMD driver error reported on Windows 10 with error code 43 in Device Manager.
When you start the Device Manager and check the properties of the AMD Readon device, you may see an error massage “Windows has stopped this device because it has reported problems” with code 43, like what is in the picture below. That means the AMD Radeon device on your PC cannot work properly. Other brands of graphics card also exit the error 43 issue, like Intel, NVIDIA, ATI, etc.
There are many factors that cause AMD Radeon graphics error 43, such as a broken or old version AMD Radeon hardware, an incompatible or outdated AMD Radeon graphics driver, broken system files, registry conflicts, etc.
How to Fix AMD Radeon Graphics Error 43
Here are the top 3 methods to fix the error:
Method 1: Make Sure the AMD Radeon Hardware Is in the Slot
Check the AMD Radeon hardware on your computer. Take down the graphics card from the slot and then reseat it firmly. Clean the slot if there were any dust.
If the AMD Radeon graphics card is in an old version, such as AMD Radeon 3000, which cannot be supported by Windows 10 operating system, it is highly recommended to upgrade the graphics card to fix the AMD Radeon graphics error 43.
See Also:Fix Error Code 43 of Hardware Device on Windows 10
Method 2: Use Troubleshooting to Fix AMD Radeon Graphics Error 43
You could also use Troubleshooting, the Windows 10feature, to try to fix the error. And here are the steps:
Step 1: Right click the Start menu.
Step 2: Select the Control Panel.
Step 3: Click Troubleshooting.
Step 4: Click the Hardware and Sound item.
Step 5: Choose the Hardware and Devices.
Step 6: Click Next to make Windows detect hardware and devices problems.
Step 7: Then click Apply this fix to solve the problem.
If this does not work in fix the AMD Radeon graphics error 43, continue the reading.
Method 3: Fix the AMD Radeon Graphics Driver Issues
The AMD Radeon graphics driver can become Windows 10 AMD driver crash over time after you encounter AMD Radeon error 43 on Windows 10. So you need to spend more time in troubleshooting the AMD graphics driver error.
Follow the steps below to fix the problem:
Step 1: Disable Driver Signature Enforcement
Some AMD Radeon graphics drivers cannot be installed on Windows because of the driver signature enforcement, which may result in the AMD Radeon driver error 43.
Note: To disable the driver signature enforcement, read Top 2 Ways to Disable Driver Signature Enforcement on Windows 10 for details.
Step 2: Uninstall the AMD Radeon Graphics Driver in Safe Mode
Enter the safe mode of Windows 10 and go to the Device Manger to uninstall the AMD Radeon device.
Note: If you don’t know how to enter Windows 10 safe mode, see How to Enter Safe Mode in Windows 10
1. Right click This PC in safe mode.
2. Select the Properties.
3. Click the link Device Manager in the left column.
4. Locate the AMD Radeon device and right click it to choose Uninstall.
Step 3: Reinstall the AMD Radeon Graphics Driver
After you have done the clean uninstall, restart your computer to enter the normal mode and run Driver Talent, a driver issues troubleshooter, to reinstall proper AMD Radeon graphics driver instead of reinstalling the driver by Windows 10.
Note: If there is no Driver Talent pre-installed on your computer, you could click the button below to download it directly.
Download Now
1. Click Scan to detect the missing AMD Radeon graphics driver.
2. Click Update or Repair to install the driver and fix the AMD Radeon graphics error 43.
3. Restart the PC to make the newly installed driver take effect.
Read More:AMD Graphics Driver Download and Update for Windows 10, 8.1, 8, 7
Driver Talent could also help to fix driver issues such as AMD Radeon graphics not showing, USB device not recognized, no Bluetooth connection, etc.
Now start the Device Manager and check if the AMD graphics error code has been eliminated.
Update: Some users fed back that installing the old version of driver could help resolve the error. The older would be the better. Maybe you can have a try. Or you can install different versions of the driver to test which one could help.
This post can also fix other graphics error code 43, like Intel error 43, NVIDIA error 43, ATI error 43, etc. Hope this could help to fix the problem. If you continue to be annoyed with the AMD Radeon graphics error 43, maybe you could also try rolling your OS back to the old one. Or you need to think about getting a new AMD Radeon graphics card in replacement. Welcome to share your experience in the comment section below with us. Any other Windows 10-related issues, please see Windows 10 on this site.
Company
Driver Talent is a professional Windows driver download and update utility from drivethelife.com, a professional team of OSToto Co., Ltd. Since the establishment in 2009, the team has been working hard to develop computer and Internet software so as to improve the work and lives of people. Our products are well received by people from all over the word.
Our Spirit
“User-centric Design, Technology Fundamental, Principles Open”
Our Products
Driver Talent, Driver Talent for Network Card, ExplorerMax
Recommended Download
|
ExplorerMax |
Driver Talent for Network Card | |||
| Smart and advanced file explorer tool for Windows platforms | Download & Install Network Drivers without Internet Connection | |||
|
30-day Free Trial |
Free Download |
The Error Code 43 (Windows has stopped this device because it has reported problems) is encountered inside Device Manager by Windows users using an AMD Radeon GPUs. Typically, affected users discover this problem after noticing that the Device Manager entry associated with the AMD Radeon GPU has a yellow exclamation point.
As it turns out, there are several different potential scenarios that might end up causing the Error Code 43:
- Bad driver installation – One of the most common instances that might end up causing this issue is as bad migration from the generic drivers to the dedicated equivalents. If this scenario is applicable, you should be able to fix the problem by running the Hardware and Device troubleshooter and applying the recommended fix.
- AMD driver is outdated – Keep in mind that certain AMD GPUs (particularly older models) are not updated through Adrenalin. Instead, this task is handled by Windows Update. If this scenario is applicable and you’re actively blocking new updates from installing on Windows 10, you should be able to fix the problem by installing every pending Windows update (Important and Cumulative).
- GPU driver conflict – If you’re facing this problem on a configuration that has both integrated and discrete graphics solution, you’re likely dealing with a driver conflict. This is fairly common with DELL and Lenovo computers since they tend to pre-load drivers. In this case, you should uninstall every driver and dependency installed belonging to AMD before going through the official channels to install the latest versions again.
- Bad motherboard driver – As it’s been confirmed by several affected users, this problem can also occur due to a severely outdated motherboard firmware driver that is not compatible to run on Windows 10. In this case, you should be able to fix this problem by installing the latest available BIOS firmware for your motherboard.
- System File Corruption – Under certain circumstances, this problem can also occur due to an issue caused by some type of system file corruption that ends up affecting your operating system. If this scenario is applicable, you should be able to fix the problem by using a procedure like clean install or repair install to restore every Windows component back to the default values.
- GPU firmware is not optimized for crypto-mining – In case you are seeing this error code while attempting to mine for cryptocurrencies, you will likely need to install a patch in order to remove the clock limit and allow for higher refresh rates. This is applicable if you have a multi GPU configuration and you’re using this rig mainly for crypto mining.
- Custom firmware is affecting standard operation – If you purchased a second-hand GPU that was previously used for crypto mining, you might expect general instability if you use it conventionally in a single GPU setup for regular operations. In this case, you should be able to take care of the error by reinstalling the default firmware.
Method 1: Running the hardware and device troubleshooter (Windows 10 only)
If you recently installed the GPU driver (or a compatible update), you might be dealing with a glitch facilitated by a bad driver installation. In case you’re seeing the Error Code 43 on Windows 10, you might be able to fix this problem by running the Hardware and Device troubleshooter and applying the recommended fix.
This built-in utility will scan your current configuration for any driver inconsistency and will attempt to fix the problem by re-installing the generic drivers or clearing the temp cache associated with the hardware component in case a problem is identified.
Several affected users have confirmed that this operation successfully allowed them to get rid of the error code 43 so they could finally use their AMD Radeon card without issues.
Here’s a quick guide on running the Hardware and Device troubleshooter utility on a Windows 10 computer:
- Press Windows key + R to open up a Run dialog box. Next, type ‘ms-settings:troubleshoot’ and press Enter to open up the Troubleshooting tab of the Settings tab.
Accessing the Troubleshooting tab - Inside the Troubleshooting tab, scroll all the way down to the section named Find and Fix other Problems and click on Hardware and Devices.
- Next, from the newly appeared context menu, click on Run the Troubleshooter from the newly appeared context menu.
Click on Hardware and Devices and click on Run the troubleshooter - After you start the Hardware and Devices troubleshooter, wait until the initial scan is complete. In case a viable repair strategy is identified, click on Apply this fix to enforce the recommended fix.
Apply this fix - After the fix is successfully applied, restart your computer and see if the problem is fixed at the next computer startup.
If you’re still seeing the Error Code 43 in Device Manager when inspecting the entry associated with your AMD Radeon card, move down to the next potential fix below.
Method 2: Install every pending Windows Update
As it turns out, this problem can also occur due to the fact that your AMD drivers are severely outdated because Windows Update is not allowed to install the latest available driver updates. Keep in mind that certain AMD GPUs are specifically built to be updated and maintained by the Windows Update component.
If this scenario is applicable and you’re using a GPU card that should be outdated via WU, you need to make sure that your OS version is actually allowed to install pending GPU drivers. To do this, take a trip to the Windows Update screen and install every pending cumulative and critical update until you manage to bring your Windows 10 build up to date.
Several affected users have confirmed that after doing this and restarting their computer, the error 43 was no longer occurring in Device Manager.
Follow the instructions below to install the latest version of Windows Update:
- Open up a Run dialog box by pressing Windows key + R. Next, type “ms-settings:windowsupdate” and press Enter to open up the Windows Update tab of the Settings tab.
Opening the Windows Update screen - Once you’re inside the Windows Update screen, move over to the section on the right, then go ahead and click on Check for Updates. Next, follow the on-screen instructions to install every pending update (important and cumulative updates), then restart your computer after every available update is installed.
Check for Windows Update Note: If you have a lot of different updates waiting to be installed, you might be prompted to restart your computer before you get the chance to install each one. If this happens, do as instructed, then return to the Windows update screen and resume the installation of the remaining updates.
- Once every available Windows Update is installed, open Device Manager once again and see if you’re still seeing the same error.
In case your AMD GPU driver still appears with an exclamation point and shows Error Code 43 (Windows has stopped this device because it has reported problems), move down to the next potential fix below.
Method 3: Updating the GPU Driver
If you’re already using AMD’s dedicated drivers and you’re still seeing the same error code, chances are you’re dealing with a conflict between the dedicated GPU drivers and the generic equivalents that were already installed by default. This is a fairly frequent occurrence with DELL and other manufacturers with the tendency of including a fleet of pre-loaded drivers.
Several affected users facing the same problem have confirmed that the problem was finally resolved after they used Device Manager to uninstall the current driver versions and then using the official AMD channels to install the latest compatible version of the driver.
- Press Windows key + R to open up a Run dialog box. Next, type ‘devmgmt.msc’ and press Enter to open up Device Manager.
Running the Device Manager - Once you’re inside Device Manager, scroll down through the list of installed devices and expand the drop-down menu associated with Display Drivers.
- Inside the Display Adapters menu, right-click on the entry associated with your AMD GPU and choose Uninstall Device from the newly appeared context menu.
Uninstall the GPU Devices - Next, follow the on-screen prompts to complete the installation of the driver, then close the Device Manager window.
- Press Windows key + R once again to open up another Run dialog box. At the next prompt, type ‘appwiz.cpl’ and press Enter to open up the Programs and Features menu.
Type appwiz.cpl and Press Enter to Open Installed Programs List - Once you’re inside the Programs and Features menu, start by clicking on the Publisher column so you can easily spot every software belonging to your GPU component.
Click the Publisher column to order the app results - Next, go ahead and uninstall every driver that is signed by AMD Corp. This includes the main Catalyst software and any other supporting software that you might have installed.
Uninstalling the AMD Software Note: After the drivers are uninstalled, your computer should automatically make the switch to the generic equivalents.
- Once every relevant component is uninstalled, restart your computer and wait for the next startup to complete.
- After your computer boots back up, visit the official AMD driver download page and use the Auto-Detect feature or select your GPU model manually, then download & install the latest version of the compatible drivers.
Downloading the latest version of the AMD driver - Follow the on-screen prompts to complete the installation of the latest available AMD driver, then open Device Manager once again and see if the problem is still persisting.
Method 4: Updating Motherboard Drivers
According to some affected users, you might also encounter this problem if you’re using an older motherboard driver that has not yet been updated for Windows 10. This can end up causing certain issues with newer AMD GPU models.
If this scenario is applicable, you should be able to fix the problem by going through the official channels and forcing your motherboard drivers to update. This particular fix has confirmed to work by a lot of different affected users, particularly those with older motherboard versions.
Here’s a general guide that will help you update your motherboard drivers:
Note: Keep in mind that this is just a general guide meant to point you in the right direction. The exact download pages and instructions of updating your motherboard drivers are specific to the model you’re using.
- Visit the official motherboard manufacturer website and download the latest versions of your motherboard drivers.
Note: if you’re don’t know your motherboard model, you can use Speccy or similar software to discover it.
Downloading the motherboard driver - Follow the on-screen prompts to install the updated motherboard drivers, then restart your computer and see if the problem is now fixed.
Note: Keep in mind that depending on your motherboard, the steps, and tools used in the installation of the new BIOS version will be different. Nowadays, most manufacturers have their own proprietary software (like E-Z flash for Asus and MFFlash for MSI) that will simplify this operation exponentially.
In case the same problem is still occurring, move down to the next potential fix below.
Method 5: Performing a Repair install / Clean install
If none of the potential fixes above have worked for you, chances are the problem is being caused by some type of underlying system file corruption that is affecting your GPU drivers. If you got this far without results, it’s clear that you will not be able to fix this problem conventionally.
Several other users that struggled with the same problem have confirmed that they were finally been able to fix the problem by resetting every Windows component to their default values.
When it comes to doing this, you have two different approaches – You can either go for a clean install or a repair install.
A clean install is an easier approach since you can initiate the procedure directly from the Settings app and you are not required to use a compatible installation media. However, unless you back up your data in advance, be prepared for data loss on the drive where Windows is installed.
If you want to avoid this problem and keep all your personal data, games, applications, and even some user preferences, you should go for a repair install (also known as an in-place upgrade). This will help you preserve data installed on the OS drive, but it has a couple of disadvantages:
- You will need to use a compatible installation media
- The procedure is way more tedious than a clean install.
In case you already did this with and you’re still facing the same problem, move down to the final fix below.
Method 6: Installing the ATIKMDAG-Patcher (if applicable)
If you’re seeing this error while attempting to use your AMD GPU to mine for cryptocurrencies, you’ll likely need to modify the default firmware of your GPU before you will be able to mine consistently without encountering errors like the 43 error code.
Some users that were previously unable to mine for crypto have confirmed that the problem was finally fixed after they installed a custom firmware version that optimized the graphics card behavior to remove the clock limit and allow for higher refresh rates.
If this scenario is applicable to your current situation, you might be able to fix the problem by installing a user-created GPU firmware for AMD & ATI GPUs called AMD / ATI Pixel Clock Patcher.
Note: This is not official software maintained by AMD, so take some time to research before deciding whether you really want to install a user-developed firmware on your GPU.
If you want to go through with this, follow the instructions below:
- Open your default browser and download the latest version of the AMD / ATI Pixel Clock Patcher.
- Once the download is complete, use software like 7 zip, WinZip or WinRar to extract the contents of the archive in a separate folder.
- After the extraction is complete, right-click on the atikmdag-patcher executable and click on Run as administrator from the newly appeared context menu.
Running Executable as administrator - Next, follow the on-screen prompts to complete the installation, then restart your computer once the operation is complete.
- At the next startup, now that the patch is successfully installed, open Device Manager once again and see if the problem is now fixed.
In case you were already using a custom firmware for your GPU or this scenario was not applicable, move down to the final fix below.
Method 7: Flashing your GPU Firmware
If none of the potential fixes above have worked (and this includes a repair install/clean install), it’s very likely that the error is firmware related. Keep in mind that similar to motherboards, GPUs have their own sort of BIOS that keeps voltages, frequencies, and other internals in check.
Issues of this kind are typically reported by people that are using multiple AMD GPUs to mine for cryptocurrencies and are forced to work with modified GPU firmware. If you brought a used GPU and the previous owner used it for crypto mining activities, you might expect to encounter this problem.
A problem with the GPU firmware can produce a myriad of issues including the Error Code 43. Some users dealing with the same problem have confirmed that they finally managed to fix the problem by restoring their AMD GPU back to their default BIOS.
IMPORTANT: Keep in mind that flashing the card’s firmware is extremely risky. Messing it up might end up bricking your GPU rendering it useless. Do not attempt this method unless you’ve done this before, or you can afford to experiment with this fix.
If you understand the consequences and you’re ready to apply this fix, follow the instructions below:
- First things first, start by downloading the flashing utility for AMD. Just visit the link with your browser, and click on the Download button associated with your OS version and wait for the archive to be successfully downloaded.
Downloading the latest version of ATIFlash / AMD VBFlash - Once the download is complete, extract the contents of the archive and put them in a separate folder.
- On your browser, access the VGA BIOS Collection web page so you can download the default firmware for your AMD GPU.
- Next, use the Refine Search Parementer filters to locate the correct firmware by setting the GPU Brand, the Card Vendor, Bus Interface, and Memory type.
Refine Search Parameters - Once you manage to locate the correct BIOS of your GPU model, click the Download button and wait for the operation to complete.
- After the .rom file is successfully downloaded, access the ATIFLash folder (the one you extracted at step 2), right-click on the amdvbflashWin.exe, then choose Run as Administrator from the newly appeared context menu. Next, click Yes at the UAC (User Account Control) to grant admin rights.
Opening the AMD GPU flashing utility - Once you’re inside the amdvbflashWin utility, start by saving your current BIOS by clicking on Save, then select a location, and then click Save once again. This operation will ensure that you are protected and have a failsafe in case something goes wrong and the new firmware doesn’t function properly.
Saving the current GPU BIOS via the amdvbflashWin utility - Once you have successfully backed up your current GPU BIOS, click Continue, then click on Load Image and select the .rom file that you previously downloaded at step 5.
- Once the default ROM is loaded inside the utility, cross your fingers and click on Program to start the flashing operation.
Starting the GPU flashing operation - Wait until the process is complete. The utility will start by erasing the current firmware before installing the new one (in our case, the stock firmware).
- Once the operation is complete, restart your computer in order to allow the changes to take effect.
- At the next startup, open Device Manager and see if the Error Code 43 is fixed.
AMD Radeon is software that dates back 20 years. This software is a collection of several services to manage the hardware associated with the GPU. From overclocking, undervolting, and performance monitoring to upgrade advisory, profile management, and streaming, this software delivers the tools a professional requires to do their work efficiently. AMD Radeon GPU users are recently experiencing Error Code: 43, concerning driver compatibility, halting the software from launching or running properly; here is how to fix the error.
What is Error Code: 43
Error Code: 43, “Windows has stopped this device because it has reported problems,” has been reported by many users showing up in the device manager with the AMD Radeon GPU icon with a yellow exclamation. After looking thoroughly into the problem, we’ve narrowed down the reasons and solutions for the problem at hand.
Starting with the AMD driver, it could be that its installation files are corrupted. One possible reason could be outdated drivers or some kind of driver conflict. Apart from that, it could also be that the system files for your system are corrupted and faulty, which may need reinstalling.
Fix 1: Device Troubleshooter
The first solution for Error Code: 43, use the system’s troubleshooter utility. Every PC comes with an inbuilt troubleshooter that detects the problems regarding an error, reports it to you, and asks for permission to fix them. Follow the steps below to perform troubleshooting:
- Press Win + R keys.
- Type in ‘ms-settings:troubleshoot’ in the text box and press Enter.
- A troubleshooting tab will open up.
- Locate the ‘Find and Fix Other Problems’ section by scrolling down.
- Next, locate the ‘Hardware and Devices’ option and Run the troubleshooter.
After the troubleshooter analyzes the problem, it will provide you with an ‘Apply the fix’ option. Click it and after completion, see if the problem continues.
Fix 2: Update Driver
As mentioned earlier, the problem could be related to the GPU driver. It could be that a conflict is forming between the AMD GPU drivers and the generic ones that were installed by the system by default. In that case, the best course of action is to start with a clean slate by uninstalling the previous drivers from the Device Manager and installing the new ones through official AMD channels. Follow the steps below to do so:
- Press the Win + R keys.
- In the text box, type ‘devmgmt.msc’ and hit Enter.
- A Device Manager window will open up.
- A list of devices will appear in the window. From it, locate the Display Drivers and click on the drop-down menu.
- Find the AMD GPU driver and right-click on it.
- Select the ‘Uninstall Device’ option.
This procedure will uninstall the AMD GPU drivers, and after it, instructions will pop up regarding the installation of drivers. Follow those instructions and close the Device Manager once it’s done.
- Open Run Program once again.
- Type in ‘appwiz.cpl’ and hit Enter.
- A Programs and Features menu will open up.
- Locate the Publisher column, click on it, and look for all the GPU components.
- Uninstall every driver that is assigned by AMD.
- Once completed, restart your PC. After it, head over to the AMD driver download page
- Download the GPU drivers using the Auto-Detect feature and install them. Once this procedure completes, check if your problem still persists or not
That is all for our fixes for AMD Radeon Error Code: 43. If you are facing errors and issues with other PC games or your PC, then also see our hub for commonly occurring PC errors and their fixes.
Driver Issues? Get DriverFix
Tip: If you’re having driver issues, we recommend using DriverFix to scan and update all your outdated drivers in just one click. It is easy to use and updates you whenever a driver update is available.
Jake Bishop
I report on gaming news and occasionally create the best video game guides.