Windows will now check the disk что это

Like many other users, you may also receive the “checking file system on C” error. Then you come to the right place. MiniTool Partition Wizard summarizes possible reasons for the computer checking file system on C issue and tells you how to stop it.

It’s natural that checking file system on C runs only once. However, it would be troublesome if it runs every time when you boot your PC. Sometimes, it even leads to system crashes. The complete information for this error is shown as follows.

“Checking file system on C: the type of the file system is NTFS. Volume label is LOCALDISK. One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue. Windows will now check the disk. To stop disk checking, press any key within xx seconds.”

What causes this issue? The section below will illustrate that. Simply move on!

Causes for Check File System on C

Well, multiple factors can trigger it. When the PC is shut down suddenly or improperly, you will see “checking file system on C” on the screen after you restart the device. Due to unexpected reasons like a power outage and hardware failure, the computer may shut down all of a sudden.

You should turn off the computer in the right way. Don’t press the Power button or unplug the power cable to turn off the PC. Besides, you need to make sure that all the running programs are closed before you power off the device. Actually, you’d better not run too many programs simultaneously, or it will cause an accidental shutdown or system crash.

It’s also not recommended to remove your USB until it finishes the task. Improper PC shutdown will bring a series of consequences. According to Microsoft, it will do harm to PC’s hardware, especially hard drives, if you directly turn on or off power. Moreover, it damages computer data and system, leading to unnormal booting.

The corrupted or damaged file system is also responsible for the “computer checking file system on C” error. If the file system is corrupted, then the file, directory, and disk structure will be corrupted and unreadable. In this case, you can run a file system scan to detect and fix file system corruption and get rid of the issue.

Bad sectors on the hard drive will result in checking file system on C NTFS as well. Fortunately, you can locate bad sectors on the drive and recover any readable information by running CHKDSK commands.

How to Check the C Drive for Errors

Before you perform other operations to solve checking file system on C, manually check the C drive for errors first. Check if the C drive has file system errors or bad sectors by using MiniTool Partition Wizard. As a professional and reliable partition manager, it enables you to check hard drive errors effectively.

Get MiniTool Partition Wizard installed on your computer. To do that, download the software by clicking on the button below and then installing it by following the on-screen instructions. After that, refer to the steps below to check the C drive with the help of MiniTool Partition Wizard.

MiniTool Partition Wizard FreeClick to Download100%Clean & Safe

Step 1: Launch the software to access its main interface.

Step 2: Right-click on the C drive and then click Check File System. Alternatively, highlight the C drive and tap Check File System under the Check Partition section in the left panel.

Картинка с сайта: www.partitionwizard.com

Step 3: In the pop-up window, choose the “Check & fix detected errors” option and click Start to carry out the operation. After the process ends, any detected errors would be fixed.

Картинка с сайта: www.partitionwizard.com

Step 4: Then continue to scan the C drive to see if it includes bad sectors. For doing that, right-click on the C drive and tap on Surface Test.

Картинка с сайта: www.partitionwizard.com

Step 5: In the elevated window, click the Start Now button to execute the operation. Then MiniTool Partition Wizard will scan the C drive sector by sector to find bad sectors.

Картинка с сайта: www.partitionwizard.com

Once the scan process ends, you will see the complete result. If there are any blocks marked with red in the scan area, it means that the C drive contains bad sectors. Then refer to this bad sector repair guide to get them fixed. It is also available to run CHKDSK commands to locate bad sectors on the C drive and recover the readable information from the bad sectors.

To do that, follow these steps.

• Type cmd in the search box.
• Click the Run as administrator option on the right side of the window.
• In the prompted Command Prompt window, type chkdsk /f/c: and press Enter. Then this command will help you find and fix any errors on the hard disk.
• Type chkdsk C: /r and hit Enter.
• After the process ends, restart your PC to see if checking file system on C NTFS vanishes.

After checking and fixing errors on the C drive, try the following methods to stop checking file system on C NTFS if the issue still occurs.

Method 1: Disable Autochk via Control Panel

An effective way to get rid of checking file system on C is to stop autochk (auto disk check) through Control Panel. After you disable the autochk option, you won’t be stuck on the “computer checking file system on C” screen. Here’s the full tutorial for you.

Step 1: Open the Run dialog window by pressing Windows and R keys.

Step 2: Type control in the Run window and hit Enter.

Step 3: In the Control Panel window, click Administrative Tools.

Картинка с сайта: www.partitionwizard.com

Step 4: Then find and double-click the Task Scheduler option.

Картинка с сайта: www.partitionwizard.com

Step 5: Navigate to Autochk by double-clicking Task Scheduler (Local) > Task Scheduler Library > Microsoft > Windows. Then click the Disable option in the right panel.

Картинка с сайта: www.partitionwizard.com

Method 2: Change the Value of BootExecute in Registry Editor

You can also disable the automatic checking file system on C NTFS by modifying Registry Editor. To be specific, change the value of BootExecute to disable auto disk check.

Step 1: After opening the Run window, type regedit and click OK.

Картинка с сайта: www.partitionwizard.com

Step 2: Navigate to the destination by following the path below.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

Step 3: Double-click BootExecute in the right panel of the window.

Картинка с сайта: www.partitionwizard.com

Step 3: Change the default value of the key by adding /K:C at the end of “*”. Then click OK to save changes.

Картинка с сайта: www.partitionwizard.com

Step 4: Exit Registry Editor.

Method 3: Run CHKNTFS Command

CHKNTFS is known as check NTFS, which is a Windows command line displaying or changing automatic disk checking when the PC starts up. You can run it to remove the “checking file system on C: the type of the file system is NTFS” message.

Step 1: Run Command Prompt as administrator from the search box.

Картинка с сайта: www.partitionwizard.com

Step 2: In the Command Prompt window, type chkntfs /x c: and press Enter.

Further reading:

For the sake of your computer, it is strongly recommended to back up your Windows regularly. To do that, you can create a system image, create a system restore point, or clone the system disk via a piece of hard drive backup software.

As a professional backup tool, MiniTool ShadowMaker enables you to back up the file, folder, partition, disk, and the entire operating system. Its Backup feature allows you to make a Windows image backup, while its Clone Disk feature helps you clone the system disk with ease.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Based on your demands, choose a backup type. If you want, use the automatic backup service, advanced backup parameters, or three different backup schemes offered by MiniTool ShadowMaker. In addition to this program, MiniTool Partition Wizard is also helpful for cloning the system.

MiniTool Partition Wizard DemoClick to Download100%Clean & Safe

Depending on your needs, you can copy the whole system disk or just copy the system-required partitions to another disk via MiniTool Partition Wizard.

How to get rid of checking file system on C? If you are looking for the answer, this post is what you need. It lists possible reasons and available troubleshooting methods for the issue.Click to Tweet

Bottom Line

If the “checking file system on C: the type of the file system is NTFS” message keeps popping up, it is necessary to take some measures to stop it. Otherwise, it will take you more time to boot the device. What’s worse, it may result in system crash, hard drive failure, and data loss, which is troublesome. To get the issue solved successfully, you should know the possible causes of the issue.

Well, this post collects potential reasons for the computer checking file system on C error. Based on that, it provides you with some methods to fix the issue. If you have any better solutions to checking file system on C, you can share them with us by writing them down in the following comment area.

If you encounter any problems while using software made by MiniTool, please feel free to contact us by sending an email to [email protected]. We would appreciate it a lot if you can give us some useful advice.

You have probably realized that every time you turn on your computer, it does a disk check, something that it never used to do before. Should this be a cause for alarm? While disk scanning does not always mean harm, it is mostly trying to communicate about an underlying problem.

This used to be an issue in Windows 10. However, many users are also experiencing it in Windows 11. As it turns out, your operating system may be detecting possible issues with your drive that it needs to check to confirm that everything is alright.

What Is Chkdsk.exe?

This is pronounced as “check disk,” and it is basically a command that checks drives. It works by displaying the status report of the disk and can even fix the issues found. However, to use this tool, your computer should have Autochk.exe in its system.

The CHKDSK command scans the hard disk and fixes any file issues on the drive. There is a range of possible reasons why the Check Disk command is triggered, some of which include:

What Triggers Chkdsk.exe?

Incorrect shutdowns

The primary trigger of the check disk process is if the system shuts down inappropriately. You are supposed to switch off the computer via the Start menu and give it time to shut down completely.

If the computer goes off abruptly or if you shut it down by pressing the Start button, you are likely to experience data losses and file system issues that force it to go through a check disk routine when booting.

Also, you should not make the mistake of shutting the computer down by unplugging it from the power supply. The Check Disk command is triggered to check if the hard disk is okay after undergoing the improper shutdown. This could also happen if you experience a power failure.

Also read: Shutting down a PC when the Windows 10/11 update is under progress

A malware attack

A check disk scan could also be an indication that your computer is under a malware attack, which might include viruses and other foreign programs that undermine the file system’s functionality.

You probably opened an unsecured link that threatened the safety of the computer system, and this triggers the Check Disk utility to run to ensure that there are no threats.

The best way to avoid this is by ensuring that you have a quality antivirus program installed at all times.

Also read: How to Prevent Malware: Lock Down Your Online Safety

Hard drive issues

Chances are that some problems with the drive have been detected. This is the leading cause of Windows 10 running CHKDSK every time you turn your PC on. It does so to check for any file system issues, like bad sectors that put the entire computer system at risk and could even result in hard drive failure.

It is recommended that you give the program time to run, hoping that it will fix the problem. It will indicate if it finds any issues and show how they should be solved. The report is in Check Disk’s log file, which you can access by going to the Start menu and then typing “event viewer.”

Click on it and select the application. You will find comprehensive information on any found issues, and you can also do that by checking the system logs for any sources listed as the cause of the underlying problems. If you notice that the Check Disk utility keeps running after every startup, it means that the hard drive is failing, and that should cause alarm.

How to Сancel Check Disk in Windows 10

The Check Disk command is handy as it continually checks for bugs and failures in the computer system, but you do not need it to run every time after starting the computer.

That said, there are steps you can take to prevent the utility from running at startup. You don’t have to wait to hit a key to skip the automatic check desk routine whenever you turn on or restart your PC.

You can edit your system registry on Windows 10 or Windows 11 or use a command in the Command Prompt. We’ll walk you through both steps.

Using the system registry

The system registry controls many different processes in Windows. Whether you’re running Windows 10 or 11, the process is pretty much the same, and you have to be careful about how you adjust settings in the registry. That’s because one wrong turn or adjustment could cause severe damage to your operating system.

That said, you should look for an expert to handle this if you’re uncomfortable using the Registry Editor or don’t know how to navigate it.

Follow these steps to back up the registry in Windows 11 and Windows 10:

• On your keyboard, press the Win + R shortcut to summon the Run dialog window.
• Type regedit into the Run text box and hit the Enter key.

Картинка с сайта: www.auslogics.com

• Click on Yes when you see the UAC confirmation box.
• After the Registry Editor appears, click on File and select Export from the context menu.
• Go to the File Name text box and enter a name for the backup file.
• Head to the Export Range section and select All. That means you’re backing up the entire system registry.
• Browse to the folder where you’d like to save the file, then click on the Save button.

Картинка с сайта: www.auslogics.com

• Whenever you want to recover the backup, click on File once you open the Registry Editor and select Import. Then, go to the folder where you saved the backup and double-click the file.

Now, follow these steps to prevent the system from running the CHKDSK utility at startup:

• Launch the Registry Editor and expand HKEY_LOCAL_MACHINE in the left pane.
• Next, expand the SYSTEM folder.
• After that, click the arrow beside CurrentControlSet to expand it.
• Under CurrentControlSet, expand Control and scroll down to click on Session Manager.
• Go to the right side of the screen after clicking on Session Manager to locate the BootExecute string and double-click it.
• After the Edit Multi-String dialog appears, go to the Value data box and change the value to autocheck autochk *. Remember to add the space before the asterisk (*).
• Now, click on the OK button.

This should stop the CHKDSK utility from running on Windows startup, whether you’re running Windows 10 or Windows 11.

Also read: How to Back Up and Restore the Windows 10 Registry

Using the Command Prompt

You can also enter a series of command lines in the Command Prompt window to stop Windows from checking your disk whenever you turn on your computer or restart it.

Follow these steps:

• Firstly, open the Command Prompt in admin mode. To do that, head to the Start menu, search for CMD, then click on Run as administrator once you see the Command Prompt result. In some versions of Windows 10, you can right-click the Start button and select Command Prompt (Admin).

Картинка с сайта: www.auslogics.com

• Click on Yes in the UAC confirmation box.
• Once the Command Prompt opens, type fsutil dirty query C: into the Command Prompt and hit the Enter key.

• After that, type chkntfs /x c: and hit the Enter key. This command will prevent the Check Disk tool from checking the drive on startup.
• You can also prevent the utility from scanning more than one drive on startup. To do that, use the following command:

chkntfs /x c: d: e:

• That’s it!

Do I Need Check Disk in Windows 10?

The answer to this question is a simple yes. You may have noticed that disk checking in Windows 10 is a bit different from that on other Windows versions, but it offers great help in getting rid of bugs and other issues that could be slowing down the system. The Check Disk command helps in correcting any problems that could have been caused by corrupted software, sudden or improper shutdowns, or malware attacks. This, in turn, helps improve the computer’s performance.

Windows 10 has a disk checker, which is a tool meant for detecting and fixing disk issues automatically. This means that you do not have to run the traditional disk check to identify any underlying problems and fix them. The command periodically checks the hard drive for any bad sectors and system errors and automatically performs maintenance, so you do not have to run it.

To run CHKDSK in Windows 10 and Windows 11, you should:

• Open File Explorer and go to This PC.
• Right-click on the drive that you wish to scan.
• Click on Properties.
• Click the Tools tab.
• Press the Check button.

You can also run the CHKDSK tool using the Command Prompt. Here’s how:

• Firstly, open the Command Prompt in admin mode. To do that, head to the Start menu, search for CMD, then click on Run as administrator once you see the Command Prompt result.
• Click Yes in the UAC confirmation box.
• After the Command Prompt opens, type the following and tap the Enter key:

chkdsk C: /f /r /x

• That’s how to run the utility using the Command Prompt on Windows 10 or Windows 11.

With this, the CHKDSK utility will check for any errors on the file system.

If there are any errors detected, the system will ask you to check the disk, and if there are no errors, then a message will pop up showing that you do not need the scan. However, when the CHKDSK tool keeps running after every computer startup, this could be a sign of an underlying problem, and you should have the issue checked.

Should One Disable Check Disk?

It depends on how the system behaves or operates. As mentioned earlier, the check disk process is crucial for detecting and fixing disk-related errors. However, if it becomes a nuisance, then you should disable it. The most annoying part of running a disk checker is when it keeps running when not needed. This mostly happens when you do not switch off the computer properly.

The blue screen may appear, and this means danger. On booting the computer, it says that it’s checking the file system or that one of the disks needs to be checked. Although you may cancel the command and go ahead to boot the computer, it is recommended that you let it finish the scan.

Pressing any key will stop the check disk process, but once you restart the computer, the command is likely to run again. If this happens, it means that your computer has an underlying issue that you should stop ignoring. It means that Windows still wants the drive to be scanned. If you ignore it, it will keep reminding you until you have it checked.

Letting the disk checker do its job is the best thing to do, but it can sometimes be time-consuming, and you do not have all that time to wait. Also, you may realize that even after letting it run the scan, it will still want to run after the next booting session. If you eject a USB flash before the system has finished running or if the system shuts down improperly, probably due to a power failure, Windows automatically detects the issue and will force another check disk scan. In such a case, you can disable it.

Why Does a Windows 10 and Windows 11 PC Run CHKDSK at Startup: Answered

From this information, it is evident that CHKDSK is a crucial aspect of your computer, as it helps keep bugs at bay. However, it is most efficient when scheduled or when you run it manually. If you realize that it keeps running at startup, that means that your computer is experiencing some hard disk errors that need to be checked. You should let the disk checker finish the scan and identify the problems. If there are any issues detected, then let the tool fix them before continuing with the boot. If it shows that there are no errors, then you are good to go.

However, if you let it run the scan and it runs the same command during the next booting session, this could be a sign that your computer system has been attacked by malware and you should check to ensure that you have up-to-date antivirus software. If the issue continues, it is best if you let an expert look into the problem, as it could be an indication of a bigger underlying issue.

Причины появления сообщения

Сообщение «Windows will now check the disk» появляется, когда операционная система Windows обнаруживает ошибки на жестком диске. Эти ошибки могут быть вызваны различными факторами, включая:

• Повреждение файловой системы
• Сбой оборудования
• Вирусная инфекция
• Некорректное завершение работы компьютера

Типы ошибок

Существует несколько типов ошибок, которые могут привести к появлению сообщения «Windows will now check the disk». Наиболее распространенными являются:

• Ошибки файловой системы: Эти ошибки возникают, когда файловая система повреждена или повреждены данные на диске.
• Ошибки оборудования: Эти ошибки возникают, когда жесткий диск или другой компонент компьютера неисправен.
• Ошибки программного обеспечения: Эти ошибки возникают, когда программное обеспечение, установленное на компьютере, вызывает проблемы с жестким диском.

Решение проблемы

Существует несколько способов решения проблемы «Windows will now check the disk». Наиболее распространенными являются:

• Запуск проверки диска: Windows имеет встроенную утилиту проверки диска, которая может обнаруживать и исправлять ошибки на жестком диске. Чтобы запустить проверку диска, выполните следующие действия:
  1. Откройте проводник Windows.
  2. Щелкните правой кнопкой мыши на диске, который вы хотите проверить.
  3. Выберите «Свойства».
  4. Перейдите на вкладку «Сервис».
  5. Нажмите кнопку «Проверить».
• Переустановка операционной системы: Если проверка диска не устраняет проблему, возможно, потребуется переустановить операционную систему. Это удалит все данные с жесткого диска, поэтому перед выполнением этой процедуры обязательно создайте резервную копию важных файлов.
• Замена жесткого диска: Если переустановка операционной системы не устраняет проблему, возможно, придется заменить жесткий диск. Это более дорогостоящий вариант, но он может быть необходим, если жесткий диск неисправен.