@NeedlesOne Welcome to HP Community!
I understand that the Windows failed fast startup with error status 0xC00000D4.
I suggest you run the SFC scan. Please refer to this Link: https://support.microsoft.com/en-in/help/4026529/windows-10-using-system-file-checker
Also, delete all the Prefetch files.
- Press «Windows-X» to display the Power User menu and click «File Explorer» to launch the utility.
- Select the system drive. …
- Open the «Prefetch» folder. …
- Select the prefetch files you want to delete, press «Delete» and click «Yes» to confirm your action and delete the files.
Try updating the computer, this will install the latest updates —
Step 1 Windows Updates —
1) In the search box, type, and open Windows Updates.
2) Check for updates.
3) If the updates are available, click on install and restart the computer.
Step 2 Install updates using HP Support Assistant
- In the search box, type, and open HP Support Assistant.
- Check for updates.
- If the updates are available, click on install and restart the computer.
Note: If you do not have HP Support Assistant installed, Click here to download the same.
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the ‘Thumbs Up‘ icon below, followed by clicking on the «Accept as solution» on this post,
Have a great day!
The error 0xC00000D4 is caused by a number of reasons which includes recent system updates, system crashes etc due to which the users cannot fast boot their systems. People usually use SSDs to speed the data transferring which means faster boot up. We all know that after using an installed version of Windows for a while, the bootup sequence gets slower day by day. That is due to the software and packages installed daily. However, if you didn’t know, Windows has a fast startup feature that speeds up your boot sequence. Albeit, you shouldn’t use it if you have SSDs connected to your board as the feature’s effect is all in vain in front of SSDs speed.
Some of us, have definitely come across the ‘Error 0xC00000D4’ error which means that the fast startup has failed or crashed due to some reason. This can be quite easily solved so no need to worry.
What causes the Fast Startup to Fail with Error 0xC00000D4?
The fast startup feature failure causes include, but is not limited to –
- A system update. One of the reasons includes a recent system update meaning the feature might have been affected by the update.
- External hardware connected to the system. Some users have reported that connecting external hardware like dvb-t usb stick caused the error.
- System crash. If your system crashed before the error popped up, it might have corrupted your system files making it a possibility of the error pop up.
There are a few generic solutions for solving this error, however, if none of them work for you, you have but one solution remaining which is mentioned below:-
Solution 1: Running SFC Scan
Sometimes, if you had a recent system update or crash, it might’ve resulted in corrupting in your system files due to which you should start off with running a system files check. To do this:
- Go to Start Menu, type in cmd.
- Right click on cmd and click ‘Run as an administrator’.
Click ‘Run as an administrator’ - Type in the following command:
sfc /scannow
Wait for it to complete as it is going to take a while.
Solution 2: Disconnecting any external hardware
If you’ve connected some external hardware like USB sticks or anything else and the error pops up, the possibility of it being a reason is to be considered. Hence, in such a case, you are to complete your task for which you’ve connected the device and then remove it.
Solution 3: Turning off Fast Startup
Unfortunately, if the above-mentioned solutions don’t fix your problem, you are probably going to have to disable Fast startup. Microsoft knows about this error yet they haven’t released an official fix for it. Hence, you are going to have to turn it off for now till Microsoft releases a fix. To turn it off, do the following:
- Make sure you are logged in as an Administrator.
- Go to Start Menu and click on Control Panel.
- Search for Power Options.
- In Power Options, on the left side, click on ‘Choose what the power buttons do’.
Click ‘Choose what the power buttons do’ - There, click on ‘Change settings that are currently unavailable’.
Click ‘Change settings that are currently unavailable’ - If a User Account Control box pops up, click Yes.
- After clicking Yes, you’ll see the lowers options are not greyed out any longer.
- To turn off Fast Startup, uncheck the ‘Turn on fast startup’ box.
Uncheck the box - Click ‘Save changes’ and close the window.
Using a .BAT File:
If you prefer a much easier way of turning off fast startup, follow these instructions:
- Download this .bat file.
- Once downloaded, put the .bat file on your desktop.
- Right click on it and select ‘Run as an Administrator’.
- If any UAC box pops up, click Run and Yes.
- You’ll see that a command prompt quickly opens and closes (turning off fast startup from the registry).
- After that’s done, you can delete the .bat file.
Kevin Arrows
Kevin Arrows is a highly experienced and knowledgeable technology specialist with over a decade of industry experience. He holds a Microsoft Certified Technology Specialist (MCTS) certification and has a deep passion for staying up-to-date on the latest tech developments. Kevin has written extensively on a wide range of tech-related topics, showcasing his expertise and knowledge in areas such as software development, cybersecurity, and cloud computing. His contributions to the tech field have been widely recognized and respected by his peers, and he is highly regarded for his ability to explain complex technical concepts in a clear and concise manner.
Всех приветствую.
Плюс/минус две недели назад все работало как часы! Зашел в биос, отключить лого производителя, и изменил 2 настройки, далее сохранил настройки биоса на микросхеме, и после нажал F10.
На след день заметил что не сработал быстрый запуск, и через день тоже, и через три…
Пробовал выставлять измененные настройки как были, не помогло…
Пробовал отключать/включать быстрый запуск/режим гибернации в винде через «Управление электропитанием» и пробовал через команду «powercfg /h off», не помогло…
В биосе тоже отключал/включал быструю загрузку, не помогло…
Такое уже наблюдалось давно, но правда тогда это само как то проходило, один — два раза глюкануло и потом снова все работало как часы, а тут уже Плюс/минус две недели не работает…
После выходя из гибернации или включении, в журнале:
События 41
Код
Система перезагрузилась, завершив работу с ошибками. Возможные причины ошибки: система перестала отвечать на запросы, произошел критический сбой или неожиданно отключилось питание.
Событие 6008
Код
Предыдущее завершение работы системы в 1:06:34 на 12.09.2016 было неожиданным.
Версия биоса последняя, драйвера все
с Windows Update, кроме релтека, и видео карты, да и драйвера вряд ли виновны, т.к работало все исправно.
Последний раз обновил драйвер для видео неделю назад, когда проблема уже была.
Никакого ПО не устанавливалось до появления проблемы, да и после тоже.
Прогнал встроенные утилиты для проверки диска и памяти, и там и там ошибок не обнаружено.
С момента появления проблемы появился глюк, нажимаю на «Завершение работы» или «Гибернация», появляется сообщение «Завершение работы» далее питание отключается, проходит пару секунд, и комп снова включается…
Проявляется редко. (powercfg /lastwake — показала что пробуждений 0).
(UPD:После переустановки Windows, проблема пока не наблюдалась).
Далее, психанул, переустановил Windows (дрова поставил от производителя), переустановка не помогла…
Вчера ради эксперимента, раза 3 — 4 выключал пк и включал, 1 раз сработал быстрый запуск.
Далее зашел в BIOS, загрузил оптимальные настройки, настроил все как было за исключением быстрой загрузки, ее оставил выключенной, F10, перезагрузка, снова раза 3 выключил/включил, так эта зараза заработала как часы!!!
Мистика какая то…
Раньше ведь в BIOS была включена быстрая загрузка, стояла на параметре «Включено», и все работало как часы…
Наткнулся на примечание:
Цитата
Отключите эту опцию, если вы изменили конфигурацию компьютера. После изменения состава компонентов как минимум один раз должны пройти все стандартные тесты процедуры POST.
Решил попробовать, т.к поменял батарейку, и проверял работоспособность слотов ОЗУ.
Не помогло…
Так же, ранее просил помощи в Microsoft Community
Советы не помогли…
Может кто чего еще подскажет???
-
Home
-
Clone Disk
- How to Fix Windows Failed Fast Startup Error 0xC00000D4
By Ariel | Follow |
Last Updated
Have you come across Windows failed fast startup with error status 0xC00000D4? This error may lead to a system crash. It’s high time that you should resolve the problem. In today’s article, MiniTool will share you with several effective troubleshooting methods.
What Causes Windows Failed Fast Startup with Error Status 0xC00000D4
In order to speed up their computer or data transferring, a great many people switch to SSDs. Do you know the Fast Startup feature? This feature is built in your installed Windows updates to speed up your boot sequence.
If you have installed an SSD on your PC as well, you would better to disable the Fast Startup. This is because the feature doesn’t have too much effect compared with SSDs. More importantly, you can be bothered by Windows failed fast startup with error status 0xC00000D4.
There are some common causes behind the failed fast startup error.
- Current system changes: The Fast Startup feature could be affected by the Windows updates that you installed
- External hardware devices: Some users reported that connecting external hardware like USB flash drive, the external hard drive can also trigger error 0xC00000D4.
- System crash: It is reported that Windows failed fast startup with error status 0xC00000D4 pops up due to system crash. This is because a system crash may lead to serious data loss or corrupted system files. So, it is highly recommended that you have a backup before performing the following fixes.
Now, let’s start fixing Windows failed fast startup with error status 0xC00000D4.
Fix 1. Undo Current System Changes Using System Restore Point
As mentioned above, the current system changes can trigger error 0xC00000D4. If you have created a system restore point before the error pops up, you can use it to undo these changes. Please read this post “How to Perform a System Restore from Command Prompts Windows 10” to know detailed steps
Fix 2. Use System File Checker
Corrupted system files are responsible for Windows failed fast startup with error status 0xC00000D4. Here System File Checker is an effective tool to repair corrupted system files. You can follow the steps below.
Step 1. Type cmd in the search box, and then right-click Command Prompt and select Run as administrator.
Step 2. Type sfc/scannow in the command prompt and hit Enter. After that, the system files will be scanned and the corrupted files will be repaired. This process will take some time to complete, so please wait patiently.
After this process completes, check if you fix the Windows failed fast startup with error status 0xC00000D4.
Fix 3. Disconnect All External Hardware Devices
If you find the error message pops up after connecting some external hardware devices, it is very likely that these devices trigger the problem. At this time, you should disconnect them temporarily and then check if the error is gone.
Fix 4. Turn off Fast Startup
If all the above methods fail to work, you may have to turn off Fast Startup before Microsoft releases the official fix for it. To disable Fast Startup, follow the steps below:
Step 1. Type control in the search box, and then select Control Panel from the context menu.
Step 2. Change View by to the Large icons, and click on Power Options in the new window.
Step 3. Click on Choose what the power buttons do > Change settings that are currently unavailable one by one.
Step 4. Uncheck the box of Turn on fast startup and click Save changes button to confirm.
Step 5. Restart your computer to execute this change and see if the error is resolved.
About The Author
Position: Columnist
Ariel has been working as a highly professional computer-relevant technology editor at MiniTool for many years. She has a strong passion for researching all knowledge related to the computer’s disk, partition, and Windows OS. Up till now, she has finished thousands of articles covering a broad range of topics and helped lots of users fix various problems. She focuses on the fields of disk management, OS backup, and PDF editing and provides her readers with insightful and informative content.
Всем привет, у меня появилась ошибка. Ошибка проявилась сегодня и до этого 4 раза где-то была. Возникает сразу несколько ошибок при обычном запуске пк.(в разные дни)
Windows не удалось выполнить быстрый запуск; состояние ошибки: 0xC00000D4.
Предыдущее завершение работы системы в 15:07:50 на 19.01.2021 было неожиданным.(при том что пк 19 числа выключил я в 22:07, а в 15:07 он работал еще, либо почему-то добавилось 5 часов т.к минуты совпадают.)
Система перезагрузилась, завершив работу с ошибками. Возможные причины ошибки: система перестала отвечать на запросы, произошел критический сбой или неожиданно отключилось питание.
События аудита были отклонены транспортом. 0
Синего экрана при запуске нет! Не знаю проблема в windows или в пк, в биосе материнки только проводил разгон оперативной памяти(без него на x.m.p. профиле все точно также). Ошибка возникает просто в случайное время и без каких-либо поводов. Также в биосе отключена поддержка CSM, может ли это быть причиной?(У меня 10 про, читал что это только для более старых виндоусов, но ошибка начала проявляться примерно в то время, когда отключил поддержку CSM(хотя это не точно!)) Материнка MSI новая около 2х недель. Винда стоит на nvme накопителе тоже около 2х недель. Пожалуйста помогите) Команды восстановления системы делал. Дрова все новые, системе также около 2х недель. Раньше на материнке Asrock такого не наблюдал.