Windows 11 батарея не заряжается полностью

Battery health in laptops is a much-needed thing while on the go or we are up for an important task anywhere. After upgrading the system, many people all around are experiencing Windows 11 battery not charging problem. The issue is something weird for some because Windows 11 battery percentage is stuck, the charging stops and does not reach 100%. However, several users also encounter the charging doesn’t start even when plugged.

Windows 11 battery not charging can occur for a variety of reasons such as bugs in updates, obsolete or corrupted driver, incorrect configuration in BIOS. Sometimes, it might be associated with charging adapter problems, faulty charging port, drained out battery health in old devices. See solutions to one more problem- How To Fix Sound Not Working in Windows 11 (Solved!).

Windows 11 battery not charging

Here is how to fix Windows 11 battery not charging –

Way-1: Check the battery adapter

Most of the charging stuck only in the faulty adapter of the system. As an effective method, it is necessary to check the adapter. People experience this Windows 11 issue if the same comes in contact with water and falls on the ground or anything hard. Any short circuit can also lead this to be damaged and it’s not recognizable from physical appearance. Therefore, follow the below procedure and carry out checks as –

  1. Power Off the laptop.
  2. Disconnect the adapter from the plug or power outlet.
  3. Check the cable connection for any torn marks, abnormal changes due to burning.
  4. If the adaptor seems wet or moist, it might come in contact with water and cause a short circuit. In that case, take it to the repair center and carry out the megger test. If it is surely grounded, replacement is only the way out.
  5. If no physical changes are visible, open the laptop battery and connect the adapter to the device. If an electrical connection is found working without battery, the problem is with battery and you have to replace it to fix the problem.

Way-2: Ensure the charging port is not defective

Sometimes charging port can be defective as well and you may experience Windows 11 battery not fully charging issue for that. A laptop, once strongly hit by something or fallen on the ground from a height, hardware issues will be there mostly. The charging port might be loose to hold the pin properly and a loose connection will prevent charging the laptop.

To be sure about this issue, you can check the charging port for any physical damage. Connecting the charger to another laptop of the same brand may also confirm the functionality of the charger. If the port is a problem, contact with repair center for a perfect fix and resolve the problem.

Way-3: Run Windows Power Troubleshooter

Power Troubleshooter is a Windows built-in utility in order to fix battery-related issues. This quick fix can also be handy for resolving Windows 11 battery not charging issue in laptops. To carry out this workaround, follow the below steps –

  1. Press Windows key and I.
  2. On the right-side pane, click on – Troubleshoot.
  3. Select – Other troubleshooters on the next window.
  4. Scroll down to Power on the following page.
  5. Click – Run.
  1. Follow the on-screen guidelines and complete troubleshooting.

Way-4: Reinstall Windows 11 battery driver

Some devices may not have compatible drivers for battery and for this reason undergo problems like Windows 11 battery not charging problems. But most cases are not similar, corrupt or outdated drivers can also cause trouble. Being the greatly important thing to maintain communication and interaction between the hardware-software in the computer, we must keep them updated.

This is a bit rustic task to look for the updated version of every driver and keep tracking of it all the time. However, it’s really easier in Windows 11 to update them using the default Device Manager. If necessary, you can reinstall the defective driver or roll back a defective update as well. To update the battery driver in your computer, follow the below guidelines –

  1. Press – Windows key + X.
  2. Select – Device Manager.
  3. When the app opens, double click on – Batteries.
  4. Right-click – Microsoft ACPI-Compliant Control Method Battery.
  5. Choose – Update driver.
  1. From the next window, select – Search automatically for drivers.
  2. After Windows finds a suitable battery driver for you, it will install the update from the manufacturer’s website.

If updating the driver doesn’t resolve the issue, you have to uninstall the driver and Windows will re-install the same once restarting is carried out. To do so, follow the below steps –

  1. Open Device Manager.
  2. Double click on Batteries.
  3. Right-click Microsoft ACPI-Compliant Control Method Battery and choose – Uninstall device.
  1. From the confirmation dialog box, click – Uninstall.
  2. Restart the laptop to make the changes effective.

Way-5: Update Microsoft AC adapter driver

Similar to the previous method, updating Microsoft AC adapter driver might fix Windows 11 battery not charging. Follow the steps –

  1. Right-click on the Start button.
  2. Click on – Device Manager.
  3. Once the Windows tool appears, double click on – Batteries.
  4. Right-click on – Microsoft AC adapter.
  5. Select – Update driver.
  6. From a wizard that prompts, click on – Search automatically for drivers.
  7. Restart the PC and see if the problem is solved.
  8. If the issue still persists then again launch the Device Manager.
  9. Expand ‘Batteries’ by double-clicking on it.
  10. Right click on – Microsoft AC adapter.
  11. Select – Uninstall device.
  12. On the prompt, click on – Uninstall.
  13. Reboot the system.

See – How to update drivers in Windows 11 (Best ways)

Way-6: Update BIOS

Windows 11 battery not charging problem can also rise up if you have some problems in the BIOS Settings. BIOS controls the hardware and the motherboard of a computer, therefore trouble like battery issues is can be directly connected with it.

Before you proceed to update the BIOS of the device, need to remove the battery and connect the charger with the laptop. If it starts normally, you can start updating the BIOS. Ensure the charging during this operation otherwise, another unwanted issue may arise. Having done that, follow the below steps to update the BIOS –

  1. Press – Windows + R keys.
  2. Type – msinfo32.
  3. Hit Enter.
  4.  When System Information window appears, click the text field present next to Find what.
  5. Type – BIOS Version and click – Find.
  1. Once you see the highlighted result, take a note of the BIOS version.
  2. Open a web browser and navigate to the manufacturer’s website for BIOS.
  3. Look for suitable versions of BIOS using the info you have noted.
  4. Download and install once found.
  5. After completing the process successfully, restart Windows 11.

Read – How to Access UEFI (BIOS) Settings on Windows 10, 8 and 8.1

Way-7: Change the charging type to Standard from Adaptive

On several manufacturer’s laptop, ‘Battery charge configuration’ is set to Adaptive by default in BIOS. According to experts, this is the primary cause of Windows 11 battery is not working issue. Fortunately, you can change the configuration using the following easy steps –

  1. Completely Shut down the laptop.
  2. Turn it on and press Esc or Del.
  3. From the next screen, enter the BIOS by choosing the option out there.
  4. On the BIOS, go Advanced.
  5. Select – Battery charge configuration.
  6. From the Options, select Standard and Save it.
  7. This method will help in the case of Dell laptop; for other manufacturers, there will be resembling steps. Follow the way accordingly.

Way-8: Install Windows update

Windows 11 battery is not working bug is an old issue you might be facing. There may be a chance that you receive an update having a resolution to the problem. So check for updates and install it if one is pending –

  1. Click on – Search.
  2. Type – updates.
  3. Press – Enter.
  4. Click on – Check for updates.
  5. Once any update is downloaded click on Restart now after you are asked.

Way-9: Uninstall Windows update

Many people complain about laptop won’t charge after Windows 11 update. So try uninstalling the update you have recently received using the below guidelines –

  1. Press – Winkey + I.
  2. Select Windows Update from the left pane of Settings.
  3. Go to the right, click on – Update history.
  4. Move down on the next page and click on – Uninstall updates.
  5. Now, click on Uninstall link.

Way-10: Drain the battery fully and put it to charge

Another great idea to fix the Windows 11 battery not charging issue is to drain the battery fully and then put it to charge. Leave the battery to become fully charged for a few more hours to see if this works. The same trick has been found to be effective for several people suffering from battery issues. However, this is an indication that you have to replace the battery as soon as possible.

Way-11: Cool down the battery

Sometimes laptop becomes really hot to get fully charged and end up triggering Windows 11 battery not charging to 100 percent problem. This is how overheating affects your laptop battery and damages it easily.

What you have to do is, detach the battery from the laptop and leave it for a few hours until it gets cold. Insert the battery with the device and put the same to charging. Hope this will fix the issue.

Way-12: Remove the battery and reinsert

There is a feasible fix to get the battery charging again is to remove the battery and then reinsert it. For this, power off the device and remove the battery unlocking the sliding pin from the laptop. Wait for a couple of minutes and then connect the battery with the machine and put the same to charging. Try checking the battery integrity after you have removed it and also the wear level.

Try to connect the laptop with an active power source after removing the battery. This will confirm whether the issue is with the battery or the adapter is the one causing trouble. Replace the defective one if required based on the detected fault.

Way-13: Clean the connection ends properly

Some users have claimed that Windows 11 battery not charging problem occurs from very simple causes like accumulation of dust on the adaptor as well as connectors. Therefore, you must keep these precise things clean always, keep them covered as possible and never let moisture come in contact.

There are some alcohol sobbed pads for cleaning available in the stores, you can use them for this purpose. Rubbing alcohol or electric cleaning chemicals can be used but do not spray directly in the contact point. Cotton or lint-free cloth can be handy to clean the dirt and accumulated dust powder. Make sure to disconnect the device from the power source before cleaning to avoid any mishappening. Once the adaptor and the connectors are completely clean, you can expect the charging will start again.

Way-14: Connect the charger to the direct Power source

Many of us use a multi-plug or extension cable in order to charge the laptop instead of connecting to a direct power source. This is because the charging points are not always in a convenient place or the workstation is a shared one.

However, these cables or the plug used for ease of access can often be faulty and you may have Windows 11 battery not charging problem. Try avoiding these extensions if possible and connect the charger directly to the power plug. If you have to use it, buy good quality one to avoid charging issues afterward.

Methods list:
Way-1: Check the battery adapter
Way-2: Ensure the charging port is not defective
Way-3: Run Windows Power Troubleshooter
Way-4: Reinstall Windows 11 battery driver
Way-5: Update Microsoft AC adapter driver
Way-6: Update BIOS
Way-7: Change the charging type to Standard from Adaptive
Way-8: Install Windows update
Way-9: Uninstall Windows update
Way-10: Drain the battery fully and put it to charge
Way-11: Cool down the battery
Way-12: Remove the battery and reinsert
Way-13: Clean the connection ends properly
Way-14: Connect the charger to the direct Power source

That’s all!!

Several users have recently reported the Battery Not Charging issue in Windows 11. This problem occurs even though the charger remains connected to the PC’s port. Since you are here, you must be facing this issue as well.

Worry not, as in this tutorial, we will discuss the reasons triggering such an issue and seven workarounds that can resolve this problem. 

How to Fix Battery Not Charging in Windows 11

Battery health in laptops is crucial while we are on the go and have important work to complete anywhere. Many users all over the globe are encountering Windows 11 battery not charging issues after they upgrade their PC to Windows 11 OS.

For some, the problem is strange since the Windows 11 battery percentage is frozen, charging pauses, and the battery does not reach 100 percent. Whatever the reason behind it, let’s explore the reasons and solutions in detail.

What causes the Battery Not Charging Issue in Windows 11?

The Windows 11 system’s battery is not charging or stops doing so when your device meets one or more of the following conditions –

  • Incorrect BIOS configuration
  • The charging port is faulty
  • Installed Windows updates have issues
  • Problems with the charging adaptor
  • Battery/Adapter drivers must have been obsolete or simply outdated 

Fix Charger Plugged in, Battery Not Charging in Windows 11

If you have already plugged in the charger, however, the battery is not charging even though the battery is low, attempt these fixes to resolve it on a Windows 11 PC.

1. Carefully examine the Cable Connection

Before proceeding to more in-depth debugging, go through the essentials. Check that the charging cable is correctly plugged into the charging port on your laptop. Then double-check its connection to the electrical outlet. If the current socket isn’t working, try another socket. If you’re using a power strip, connect directly to a wall outlet instead.

Do check the cable connection where it enters the AC adapter. Many a time, this part of the cable becomes loose because of prolonged usage. If you do remember the adapter being in touch with moisture or water, keep that in direct sunlight.

2. Remove the battery and connect it to the power source

Next, verify to see whether your laptop’s battery is working or not. If your laptop has a removable battery, remove it fully from the machine. This is usually accomplished by pulling on a couple of tabs (hooks) on the underside of your laptop. If you’re unsure about the procedure, see the owner’s manual or Google directions for your model.

Before you remove the battery, make sure to turn off your computer. After removing the battery, press and hold the power button for several seconds to drain any leftover charge in the system. Connect the charger and try to switch on your laptop after that.

If it functions normally, your battery is the source of your charging issue. Reinstall the battery in its compartment and double-check that all of the contacts are lined correctly. If this does not resolve the issue, you most likely have a dead battery that has to be replaced.

Note: If your laptop doesn’t have a replaceable battery, you can try opening it up and removing it manually. However, doing so will most certainly violate your warranty, and if you make a mistake, you could cause major damage to your computer. In these instances, it is safer to take your computer to a technician who can perform a professional battery analysis.

3. Try Windows Power Troubleshooter

Power Troubleshooter is a built-in Windows program for resolving battery-related issues. This simple repair is also useful for repairing the Windows 11 battery not charging problem in laptops. Follow the procedures below to carry out this fix –

  • Open the Settings menu by pressing Windows Key & I.
  • Select System and then Troubleshoot on the right pane.
  • Click Other troubleshooters next to see more options. 
  • Locate the Power troubleshooter under the Other section. 
  • Click on the Run button available on its right end. 

Run Power troubleshooter

  • Now, follow the on-screen instructions to complete the remaining steps. 

4. Update BIOS

Windows 11 battery might also stop charging if there have been issues inside the BIOS settings. This is because the BIOS controls the hardware and motherboard of a computer, the battery not charging issue is directly linked to it. 

Remove the battery and plug the charger into the laptop before proceeding to update the device’s BIOS. If it boots up normally, you can begin updating the BIOS. While performing this solution, make sure that the charging is ON on your PC. Else, some other issue may pop in. Here’s how to update BIOS in Windows 11 –

  • Press Win + R to launch the Run dialog.
  • Type msinfo32 and press Enter.
  • In the System Information window, put the cursor inside the “Find what” section.
  • Type the BIOS version and then click on the Find button.
  • Take note of the BIOS version after you see the highlighted result.

BIOS version or date

  • Navigate to the BIOS manufacturer’s website through a web browser.
  • Using the information you’ve gathered, look for appropriate BIOS versions.
  • Once located, download and install its latest patch on your computer. 
  • You may now restart your PC and check if the battery starts charging successfully on your computer. 

5. Update or Reinstall Windows 11 Battery Driver

Although your battery is an external device, Microsoft installs specific drivers to ease its functions. If your computer is still plugged in and not charging after attempting the preceding methods, upgrading or removing those drivers may help to restart the charging process.

Follow the steps below to upgrade your computer’s battery driver –

  • Press the Windows key + X to open the Power menu.
  • Choose Device Manager.
  • Click to expand the Batteries section. 
  • Now, right-click on Microsoft ACPI-Compliant Control Method Battery and choose the Update driver option.
  • Select Search automatically for drivers on the Update Driver’s Window.
  • When Windows locates a compatible battery driver for you, it will download the update from the manufacturer’s website and install it.

update battery drivers

If updating the driver does not address this problem, you must uninstall it from your computer. Windows will reinstall the removed driver automatically when you reboot your PC. Well, here are the steps to work on –

  • Press Windows + X, and then tap the letter “M” to launch Device Manager. 
  • Click on the arrow beside the Batteries option.
  • When this expands, right-click on Microsoft ACPI-Compliant Control Method Battery. This time, choose the Uninstall device option.
  • When a confirmation window pops up, hit the Uninstall button again.

Restart your PC so that the recent changes become effective from the next login. If the problem persists even after this, re-visit Device Manager and try upgrading or uninstalling the Microsoft AC Adapter under Batteries. 

Note: If all fail, make sure to install optional updates on your computer. 

6. Switch the charging mode from Adaptive to Standard

‘Battery charge configuration’ is set to Adaptive by default in BIOS on numerous manufacturers’ computers. According to experts, this may also cause the issue of “Battery Not Charging” on Windows 11 PC. To change the current charging mode, follow these steps –

  • Shut down your PC completely.
  • Switch it on and then press Esc or Del
  • Enter the BIOS by selecting the option on the subsequent screen.
  • Go to the BIOS and select the Advanced option.
  • Choose “Battery charge configuration”.
  • Select Standard from the Options menu and save it. 

Note: This solution will work for Dell laptops; similar steps will be available for other manufacturers. However, do use the appropriate function key to boot into the BIOS. 

7] Disable the Latest Windows updates

If you had recently installed a cumulative update, and this problem starts occurring after that, you must have installed a corrupt patch update. Get rid of this update by navigating to the below path –

Settings (Win + I) > Windows Update > Update history

  • Scroll down to Related settings, and click Uninstall updates

Repair Windows 11 - Uninstall updates

  • The system will redirect you to the Control Panel.
  • Select the recently installed patch, and hit the Uninstall button.

Wait for this update to uninstall successfully. Once it is over, restart your PC, re-visit Windows Update, and reinstall the pending updates on your computer. 

What more you can do to fix the “Battery Not Charging” Issue?

Here are a few things that you must attempt to fix the battery issues on your computer –

1. Drain the battery completely and then recharge it

Complete draining your Windows 11 battery till its last percentage and then recharge it. Allow a couple more hours for the battery to fully charge to see if this works. Several people who have battery problems have found the same method to be useful.

Note: This is an indication for you to replace the battery of your system as soon as possible.

2. Let the Battery Cool down 

On the Windows 11 OS, when a laptop becomes excessively hot, the battery does not charge 100 percent. This is how excessive heat damages and destroys your laptop battery. Simply remove the battery from the laptop and leave it aside for a few hours until it cools down to solve this problem. To charge the device, insert the battery and turn it on. Check to see if it works.

3. Properly clean the connector ends

Some users believe that the battery stops charging in Windows 11 because of the dust piling up on the AC adapter or the connectors. Make a habit of regularly cleaning all such surfaces. 

For this, you may use several alcohol-soaked cleaning pads that can be found in stores. You can also rub alcohol or electric cleaning solutions on the contact area, but not directly on it. Cotton or lint-free cloths can be used to remove dirt and dust powder.

Note: Before cleaning, make sure the device is unplugged from the power source to avoid any serious issues. After carefully cleaning the adaptor and connectors, you can expect the charging to resume.

I hope this article helped sort out the Battery Not Charging in Windows 11.

It’s a good idea to keep up with Windows updates so your system can continue to run smoothly and your data stays secure. On occasion, however, an update can cause a conflict that breaks something. After installing a previous Windows update, for example, my laptop’s battery stopped charging. My laptop showed it was plugged in, but then at the same time it would tell me it was also not charging. Argh!

Thankfully, I found that this problem was not uncommon and would occasionally arise after a Windows update. And more thankfully, there was an easy fix. I haven’t been able to replicate it since it occurred on my previous laptop running Windows 10, but the Device Manager in Windows 11 hasn’t changed since then, so my fix is worth trying if you encounter this problem. Here’s how I got my laptop’s battery back to charging when it was plugged in.

Read more: Ditch These Windows 11 Default Settings

Plugged in, not charging

If your laptop refuses to charge the battery even though it acknowledges that it’s plugged in, here’s what you need to do:

  • Open the Device Manager by searching for it or right-clicking the Start button and selecting Device Manager.
  • Click Batteries on the list to expand it and you should see two items: Microsoft AC Adapter and Microsoft ACPI-Compliant Control Method Battery.
Screenshot: Matt Elliott/CNET
  • Right-click on each item and choose Uninstall device. Yes, you are uninstalling your laptop’s battery drivers, but don’t worry because they will automatically be reinstalled when you restart your laptop.
  • Shut down your laptop.
  • Unplug the power cable from your laptop.
  • If your laptop has a removable battery, remove it. My Lenovo laptop did not have a removable battery. I tried skipping this step but it didn’t work, so I removed the bottom panel of my laptop and then removed the battery by disconnecting it from the motherboard.
  • Put the battery back in if you removed it.
  • Plug in your laptop.
  • Power on your laptop.
  • Click the battery icon in the system tray and you should see that your laptop is plugged in and charging.

By reinstalling my Lenovo laptop’s battery drivers and disconnecting its battery and then reconnecting it, I got my laptop’s battery back to charging when it’s plugged in. With differences in manufacturers, however, your mileage may vary. 

Watch this: Windows 11 Tips and Hidden Features

Two other possible fixes: Update or restore

If uninstalling and reinstalling the battery drivers didn’t get your battery back and charging, I suggest you check for updates or restore Windows 11 to an earlier point.

To update Windows, open Settings, choose Windows Update and click the blue Check for updates button. 

Instead of moving forward with an update, you can try moving backward to an earlier point in time when your battery was fully operational and able to be charged. This possible fix is available only if you had previously created restore points using System Protection. 

To check to see if you have any restore points to which you can return, open the Control Panel by searching for in the Taskbar and then search for Recovery. On the Recovery page in the Control Panel, click Open System Restore, click Next and choose and restore point from a point in time before your battery stopped charging. 

Screenshot: Matt Elliott/CNET

For more, check out nine hidden Windows 11 features, how to manage Windows 11 updates on your terms and Windows 11 features to help boost your productivity.

Download Windows Speedup Tool to fix errors and make PC run faster

Windows 11/10 users, at times, face issues that can get a little annoying after a while, especially when you see that a new fancy update brings just about as many new bugs as it fixes. The good thing is where there is a problem, there is a solution. If your laptop or battery has become, it may charge slowly – but some users have reported that they face this problem even on a new device. If your Windows 11/10 laptop is  not charging or taking forever or a long time to charge, here are suggestions that could help you identify & fix the problem yourself before you take it to a technician.

The possible reasons could be:

  • The battery is old or damaged
  • The charger isn’t compatible with your PC.
  • The charger isn’t powerful enough to charge your PC.
  • The charger isn’t connected to the charging port on your PC.

Windows Laptop battery not charging

Here are a few things you could try to fix the Laptop battery not charging problem:

1] Perform Hard Reset

This solution usually works when the device (with a removable battery) charges slowly because it is constantly plugged in. Here is how to go about it:

  1. Switch off the power of the Windows device.
  2. Disconnect the charger and remove the battery from the device.
  3. Press and hold the power button for at least 30 seconds. This will discharge the motherboard’s capacitors and reset memory chips that were constantly active.
  4. Reinsert the battery, plug in and charge the device.

If this doesn’t work, try updating the BIOS.

Read: Laptop battery stuck at 0, 50, 99% charging

2] Update BIOS

If the charging issue typical to your device is reportedly fixed in a later version, update the BIOS. Here is how:

Windows laptop Battery charging slowly

  1. Press Win key + R key to get to the Run window.
  2. Type msinfo32 and hit ‘Enter’.
  3. Check the BIOS version/Date info on the right pane of the System Information window. Note down the version.
  4. Check if this is indeed the latest available version for your model. If not, update the BIOS following the instructions on the support website.

If you don’t want to update BIOS or if it is already updated and yet the problem persists, check out the next point.

Related read: Battery shows being charged but battery percentage not increasing.

3] Battery calibration

If you do not systematically charge the battery, the irregular battery drainage and charging cycles can meddle with the charging function. You need to re-calibrate the battery, and here is how:

  1. Discharge the battery 100%.
  2. In the Off mode, leave the device on charge for about an hour more than the estimated time it would take to charge fully.
  3. With the charger plugged in, turn on the device to make sure it has fully charged.
  4. Disconnect the charger and use it as usual. Avoid charging until the charge is low and do not unplug before the device has charged completely.

Maintain this charging ritual, and the issue will not reappear. If however, battery calibration wasn’t the issue, go to method 4.

Read: How to charge your Windows laptop without an OEM charger.

4] Perform a Battery check

As the device ages, the battery performance will keep dropping. Use an app such as BatteryInfoView to monitor current battery performance with respect to its optimum capacity. Replace the battery if the battery is not performing up to the mark. You could also generate a Battery Health Report using the Power Efficiency Diagnostic Report Tool.

Fix: Laptop slow and lagging when charging

5] Perform a voltage check

If none of the above solutions worked, maybe every part of your device is fine, but the charger is not. To detect a faulty charger, perform a voltage test with a voltage tester or multimeter. If the voltage reading is lower than the original output printed, the charger needs to be replaced. Use another compatible charger on your device and see.

Read:

  • Surface Battery not charging when plugged in
  • Windows laptop turns off when unplugged.

Points to consider according to Microsoft:

  • The charging cable doesn’t meet the power requirements for the charger or PC.
  • Some USB chargers, such as micro USB and USB-C chargers, use a proprietary charger. Therefore, your PC might only be able to use a charger from your PC manufacturer.
  • A PC with USB-C connectors has higher power limits than a PC that doesn’t charge using a USB-C connection. USB-C can support up to 5V, 3A, 15W. If the connector supports USB Power Delivery, which is a standard, it can charge faster and at higher power levels.
  • To get the fastest charging time, your PC, charger, and cable must support the industry standards. Your charger and charging cable must also support the PC’s power levels. For example, if your PC requires 12V and 3A for charging, a 5V, 3A charger won’t be the best.

Read: Disable PC isn’t charging or Slow charger warnings in Windows

Laptop is not charging while playing games

When the battery discharge rate is higher than the battery charge rate, it seems the battery is not charging even when plugged in. Such an issue is common while playing heavy graphics games. Some heavy graphics games draw more power than the charger is providing to the laptop battery to get charged. If you experience this issue, save your progress and close the game. Now, play another game and see what happens.

The only way to fix this problem is to get a high-power AC Adapter. This adapter will provide a sufficient amount of electric current to charge the laptop battery when you play games. To purchase a high-power AC Adapter, you must contact your laptop manufacturer to get the correct information; otherwise, you can damage your laptop battery or motherboard.

Related read that may help you: Laptop Battery Usage Tips & Optimization Guide for Windows.

Anand Khanse is the Admin of TheWindowsClub.com, a 10-year Microsoft MVP (2006-16) & a Windows Insider MVP (2016-2022). Please read the entire post & the comments first, create a System Restore Point before making any changes to your system & be careful about any 3rd-party offers while installing freeware.

Issue: Just recently, I upgraded to Windows 11, and now I have problems with my laptop’s battery – it won’t charge at all and is completely dead. My laptop is now almost useless, as I can use it only when connected via the cord. I don’t want to buy a new battery because of this, so I wonder if it can be fixed.

Solved Answer

Windows 11 is the latest version of the Windows operating system developed by Microsoft. This new version offers a more intuitive user interface with faster performance, improved security features, an enhanced search experience, and better compatibility with other systems. With Windows 11, users can now enjoy a more intuitive user interface, faster performance, improved security features, an enhanced search experience, and better support for online services.

Unfortunately, not all users’ experiences with this newest Windows version were positive. Some people encountered quite serious problems after upgrading, such as the system not shutting down, icons disappearing, high RAM usage, and similar.

Battery not charging after upgrading to Windows 11 is another issue that adds to this pile of complaints and can be incredibly frustrating to users. Many people rely on their laptops for work, school, and entertainment, so a malfunctioning battery can be extremely disruptive. Fortunately, there are ways to diagnose and resolve the issue.

Some users reported that they are not able to use batteries at all, and they are not charging when plugged in. Others even claimed that the laptop does not even work with a cord, which could be a huge problem. However, most people managed to turn the device on for at least some period of time – that’s when the troubleshooting should be performed. This issue affects laptops from various manufacturers, including Dell, Acer, Asus, and others.

How to fix battery not charging after Windows 11 upgrade?

One of the most common causes of laptop batteries not working after upgrading to Windows 11 is a driver issue. Outdated or incompatible drivers can cause the laptop to run inefficiently, draining the battery life much faster than usual.

We would also recommend running a scan with FortectMac Washing Machine X9 PC repair tool that can diagnose your system and resolve all the underlying issues for you automatically. Alternatively, you can proceed with the solutions below.

Fix 1. Run Power troubleshooter

Once you can boot your laptop, start by running the built-in troubleshooter:

  • Open Windows Settings (Win + I) and scroll down to find Troubleshoot option – click it
  • Select Other troubleshooters
  • Find Power from the list and click Run
  • Follow on-screen instructions and apply all the suggested fixes.

Run Power troubleshooter

Fix 2. Update motherboard drivers



Fix it now!




Fix it now!

To repair damaged system, you will have a 24hr Free Trial and the ability to purchase the licensed version of the Fortect Mac Washing Machine X9.

Updating motherboard drivers is something you should do next. The easiest and quickest way of doing so it by running DriverFix software. If you would like to update it manually, you need to find out which motherboard you are using – follow these steps:

  • Type cmd in Windows search
  • Right-click on Command Prompt result and select Run as administrator
  • When the User Account Control window pops up, click Yes
  • Next, copy and paste the following command, and then press Enter:
    wmic baseboard get product, manufacturer
  • Copy the name and close down Command Prompt.

Update motherboard drivers

Now head to your motherboard manufacturer’s website, enter your name, make, and model, and download the latest available drivers and install them by following on-screen instructions. Don’t forget to restart your system after.

Note: some users reported that installing the latest drivers for Intel Graphics and Realtek also contributed to the solution. If you are using other hardware equivalents, update them as well. BIOS is another aspect that should be updated as well.

Fix 3. Change power plan

  • Type Control Panel in Windows search and press Enter
  • Go to the Hardware and sound section
  • Select Power Options
  • If you had the power plan set to Power saver or High performance, switch it to Balanced. If it was on Balanced already, switch it to Power saver.

Change power settings

Fix 4. Downgrade to Windows 10



Fix it now!




Fix it now!

To repair damaged system, you will have a 24hr Free Trial and the ability to purchase the licensed version of the Fortect Mac Washing Machine X9.

Many users reported that they never encountered battery problems in Windows 10, so if none of the solutions worked for you, you can try downgrading to Windows 10 and see if that solves your problem. Some people said that even after downgrading, the problem persisted. You can then reset or reinstall Windows altogether.

Downgrade to Windows 10

Fix 5. Replace your battery

In an unfortunate course of events, the battery going dead after upgrading might be a bad coincidence, and it’s simply your battery dying. Laptop batteries generally last between two to five years. To find a replacement, simply search online for the make and model of your laptop or contact your manufacturer directly.

Fix 6. Other tips



Fix it now!




Fix it now!

To repair damaged system, you will have a 24hr Free Trial and the ability to purchase the licensed version of the Fortect Mac Washing Machine X9.

There are a few other tips that might help you resolve the issue:

  1. Power down your laptop, take out the battery and wait for a few minutes. Put it back in and see if that helps.
  2. Check the battery cable – make sure it is connected properly. Check if there’s any physical damage.
  3. Try connecting the batter to a direct power source instead of a multiplug.
  4. Make sure all Windows updates are installed.
  5. Bring your device to a repair shop – each case can be very different, and sometimes only a professional can fix the battery not charging issues (usually, it is the faulty hardware).

Repair your Errors automatically

ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow:

do it now!

Download Fix
 

Happiness
Guarantee

do it now!

Download Fix
 

Happiness
Guarantee

Compatible with Microsoft Windows
Compatible with OS X

Still having problems?
If you failed to fix your error using FortectMac Washing Machine X9, reach our support team for help. Please, let us know all details that you think we should know about your problem.

Fortect will diagnose your damaged PC. It will scan all System Files that have been damaged by security threats. Mac Washing Machine X9 will diagnose your damaged computer. It will scan all System Files and Registry Keys that have been damaged by security threats. To repair damaged system, you will have a 24hr Free Trial and the ability to purchase the licensed version of the Fortect malware removal tool. To repair damaged system, you have to purchase the licensed version of Mac Washing Machine X9 malware removal tool.

Prevent websites, ISP, and other parties from tracking you

To stay completely anonymous and prevent the ISP and the government from spying on you, you should employ Private Internet Access VPN. It will allow you to connect to the internet while being completely anonymous by encrypting all information, prevent trackers, ads, as well as malicious content. Most importantly, you will stop the illegal surveillance activities that NSA and other governmental institutions are performing behind your back.

Recover your lost files quickly

Unforeseen circumstances can happen at any time while using the computer: it can turn off due to a power cut, a Blue Screen of Death (BSoD) can occur, or random Windows updates can the machine when you went away for a few minutes. As a result, your schoolwork, important documents, and other data might be lost. To recover lost files, you can use Data Recovery Pro – it searches through copies of files that are still available on your hard drive and retrieves them quickly.

Понравилась статья? Поделить с друзьями:
0 0 голоса
Рейтинг статьи
Подписаться
Уведомить о
guest

0 комментариев
Старые
Новые Популярные
Межтекстовые Отзывы
Посмотреть все комментарии
  • Создание загрузочной флешки windows 10 rutracker
  • Плохо слышно микрофон windows 10 на ноутбуке
  • Вход в автозагрузку windows 7
  • Лучшая программа для видеонаблюдения windows
  • Как узнать какой у меня directx на windows 11