Восстановление при загрузке не удалось восстановить компьютер windows 10 srttrail txt что делать

Все способы:

Способ 1: Отключение средства восстановления
Способ 2: Восстановление загрузчика
Способ 3: Восстановление ключей реестра
Способ 4: Отключение ELAM
Способ 5: Проверка системных файлов и компонентов
Вопросы и ответы: 1

Обратите внимание! В каждом методе данной статьи используется загрузочный накопитель с записанной операционной системой Windows 10. Полная информация о том, как его создать, доступна по ссылке ниже.

Подробнее: Создание загрузочной флешки UEFI с Windows 10

Способ 1: Отключение средства восстановления

Когда в системе происходит какой-то сбой, при последующей перезагрузке компьютера в большинстве случаев запускается интегрированное средство восстановления. Однако в случае с ошибкой, вызванной файлом «SrtTrail.txt», именно оно вызывает BSOD (синий экран смерти). В подобных ситуациях нужно попробовать деактивировать автоматический старт средства восстановления.

Подключите к компьютеру/ноутбуку накопитель с записанной операционной системой Виндовс 10.
Перезапустите ОС и загрузитесь с подготовленного носителя через «Boot menu». Если вы не знаете, какой именно клавишей вызывается «Boot menu», ознакомьтесь с руководством по ссылке ниже.
Подробнее: Руководство по установке Windows 10 с USB-флешки или диска
Загрузившись с подготовленного диска или флешки, выберите в первом меню подходящий язык. После используйте кнопку «Далее».

Выбор языка в первом меню загрузочного накопителя Windows 10 и нажатие кнопки Далее

Затем нажмите левой кнопкой мыши по строчке «Восстановление системы».

Выбор пункта Восстановление системы во втором меню загрузочного накопителя Windows 10

В следующем меню выберите пункт «Поиск и устранение неисправностей».

Выбор пункта Поиск и устранение неисправностей в окне Восстановление системы Windows 10

После этого выберите вариант «Командная строка».

Запуск Командной строки из меню Восстановления системы загрузочного накопителя Windows 10

В открывшееся окно оснастки пропишите или скопируйте следующую команду, а затем нажмите «Enter» для её обработки:
bcdedit /set {default} recoveryenabled No

Если всё выполнено правильно, вы увидите сообщение об успешном завершении операции.

Выполнение команды для отключения средства восстановления в Windows 10

После этого закройте окно утилиты и нажмите кнопку «Продолжить» в следующем меню.

Нажатие кнопки Продолжить для запуска Windows 10 в обычном режиме с установочного накопителя

На этот раз система загрузится нормально и без ошибки. Если вам необходимо будет вновь включить средство восстановления, запустите «Командную строку» от имени администратора и выполните в ней вот такую команду:
bcdedit /set {default} recoveryenabled Yes

Читайте также: Запуск «Командной строки» от имени администратора в Windows 10

Способ 2: Восстановление загрузчика

Иногда система выдаёт ошибку с файлом «srttrail.txt» из-за повреждённого загрузчика. В таком случае нужно попробовать обновить хранилище конфигураций загрузчика и обновить загрузочную запись и загрузочный сектор.

Выполните первые шесть шагов, описанные в предыдущем методе. Ваша цель – запустить «Командную строку».
В открывшееся окно утилиты следует поочерёдно ввести несколько команд, указанных ниже. Не забывайте нажимать «Enter» после ввода каждой из них для обработки.
bootrec /rebuildbcd bootrec /fixmbr bootrec /fixboot

Выполнение ряда команд для изменения хранилища конфигураций загрузчика в Windows 10

Если в процессе обработки команды bootrec /fixboot вы увидите сообщение об отказе в доступе, выполните команду bootsect /nt60 sys, а затем вернитесь к команде bootrec /fixboot.
Читайте также: Исправляем проблему с доступом к команде Fixboot в Windows 10

Возврат доступа для обработки команды fixboot в ОС Windows 10

После этого выполните команду chkdsk C: /f /r. С её помощью вы проверите жесткий диск и файловую систему на наличие ошибок. В случае их обнаружения утилита попытается заменить повреждённые данные. Эта операция занимает некоторое время, поэтому наберитесь терпения.

Выполнение команды для проверки жесткого диска и файловой системы в Windows 10

По окончании операции закройте окно «Командной строки» и загрузите систему в обычном режиме. Проблема с файлом «srttrail.txt» должна будет исчезнуть.

Способ 3: Восстановление ключей реестра

По умолчанию в Виндовс 10 каждые несколько дней автоматически создаются резервные копии записей реестра. Так как ошибка с файлом «srttrail.txt» зачастую связана с его ключами (обновление ОС, драйверов и так далее), попробуйте скопировать данные из бэкапов.

Обратите внимание! Если проблема возникла на компьютере с недавно установленной ОС Windows 10, этот способ не поможет. В таком случае резервные копии будут попросту отсутствовать.

Восстановление реестра выглядит следующим образом:

Запустите оснастку «Командная строка» при помощи загрузочного накопителя, как описано в первом методе.
В открывшееся окно пропишите следующую команду:
xcopy c:\windows\system32\config\RegBack c:\windows\system32\config

В случае успеха вы увидите сообщение с указанием числа скопированных файлов.

Выполнение команды для восстановления ключей реестра из резервных копий в Windows 10

Закройте оснастку и перезагрузите компьютер/ноутбук. После этого проблема должна исчезнуть.

Способ 4: Отключение ELAM

ELAM (Early Launch Anti-Malware) – это своеобразная защита от вирусов, которая запускается еще на стадии загрузки ОС. Периодически она может посчитать файлы драйверов опасными, что и приводит к ошибке «srttrail.txt». В подобных ситуациях попробуйте отключить ELAM.

Перезагрузите систему. Во время запуска нажимайте «F8». Эти действия должны вызвать меню с разными вариантами загрузки. Если не получается это сделать по каким-то причинам, загрузитесь с установочного накопителя и вызовите «Командную строку». В ней пропишите и обработайте следующую команду:
bcdedit /set {globalsettings} advancedoptions true

Выполнение команды для включения автоматического запуска режимов загрузки Windows 10

После этого закройте утилиту и снова перезагрузите устройство. Теперь нужное меню будет вызываться автоматически при каждом запуске ОС. После появления меню с разными вариантами загрузки системы нажмите клавишу «8».

Запуск системы с отключением функции ELAM из меню выбора вариантов загрузки Windows 10

В результате система загрузится без участия защиты ELAM. Вполне вероятно, что проблема будет решена.

Способ 5: Проверка системных файлов и компонентов

В последней версии ОС есть утилиты, которые сканируют системные компоненты и файлы, автоматически исправляя ошибки в случае их обнаружения. Для применения метода нужно сделать следующее:

Первым делом запустите систему в «Безопасном режиме». Так как ошибка с файлом «srttrail.txt» не позволяет войти в ОС привычным способом, придётся загрузиться с установочного накопителя, запустить «Командную строку» и обработать команду, указанную в предыдущем методе, после чего выполнить рестарт системы.
В окне выбора режима загрузки нажмите клавишу «6». Проверка системы выполняется также в «Командной строке», однако она должна быть запущена непосредственно из ОС, а не с установочного носителя.

Процесс загрузки системы Windows 10 в безопасном режиме с поддержкой Командной строки

В открывшемся окне оснастки используйте команду sfc /scannow. Её обработка занимает время. Важно не закрывать утилиту до окончания проверки.

Выполнение команды для сканирования жесткого диска на наличие ошибок в Windows 10

По завершении операции обработайте ещё одну команду:
DISM /Online /Cleanup-Image /RestoreHealth

Выполнение команды для восстановления поврежденных данных файловой системы Windows 10

Она занимает еще больше времени, чем предыдущая процедура. По окончании не закрывайте «Командную строку», иначе перезагрузить систему можно будет лишь физически. Вместо этого выполните команду shutdown –r.
Во время рестарта снова возникнет окно с вариантами запуска. В нём просто нажмите «Enter». Войдя в систему, вызовите «Командную строку» от имени администратора. Для этого просто кликните на иконку поиска, введите запрос cmd и выберите из появившихся результатов вариант, показанный на скриншоте цифрами 3 и 4.

Процесс запуска Командной строки от имени администратора через меню Поиск в Windows 10

В открывшемся окне выполните команду bcdedit /deletevalue {globalsettings} advancedoptions.

Выполнение команды для отключения автоматического запуска режимов загрузки Windows 10

Больше окно с выбором варианта загрузки не будет появляться при каждом старте ОС. Также должна исчезнуть и ошибка, связанная с файлом «srttrail.txt».

Наша группа в TelegramПолезные советы и помощь

Источник

Table of contents

What Is SrtTrail.txt in Windows, and Why Is It Important?
What Is the SrtTrail.txt BSOD Error on Windows 10/11?
Impact of the SrtTrail.txt Error on Windows OS
What Causes the SrtTrail.txt BSOD Error on Windows 10/11?
How to Fix the SrtTrail.txt BSOD Error on Windows 10/11: Before Anything Else
- Fix 1: Disconnect your USB devices
- Fix 2: Remove and replace your laptop battery
- Fix 3: Perform a system restore
- Fix 4: Load in Safe Mode and update your drivers
- Fix 5: Disable ELAM protection
How to Fix the SrtTrail.txt BSOD Error on Windows 10/11 Using the Command Prompt
- Fix 6: Run bootrec.exe commands in Command Prompt
- Fix 7: Run the CHKDSK command
- Fix 8: Disable Automatic Repair
- Fix 9: Run SFC and DISM scans
- Fix 10: Repair the Windows registry
- Fix 11: Delete the problematic file
- Fix 12: Fix your device partition
How to Fix the SrtTrail.txt BSOD Error on Windows 10/11: Advanced Methods
- Fix 13: Perform some tweaks in the BIOS
- Fix 14: Reconnect your hard disk
- Fix 15: Remove and reconnect your memory modules
- Fix 16: Reset your system
- Fix 17: Perform a clean install
Tips for Preventing the Windows SrtTrail.txt Error
The SrtTrail.txt BSOD Error on Windows 10/11: Fixed
FAQ

It’s never fun to run into an error on your computer, especially when it’s a blue screen of death (BSOD) . And since you’re reading this—let me guess—you are seeing something like Log file: C:\Windows\System32\Logfiles\Srt\SrtTrail.txt on your screen.

I’ll just keep guessing: it has probably popped out of the blue when you were trying to turn on your PC, or maybe even when the computer was already running.

I know it hurts, and I share your pain, but the bad times are about to pass, as I’m going to show you what this error is and what you can do to fix it for good.

What Is SrtTrail.txt in Windows, and Why Is It Important?

The SrtTrail.txt file (short for Startup Repair Trail) is a log file generated by the Windows operating system when a startup error occurs, and you can find it here: C:\Windows\System32\Logfiles\Srt\SrtTrail.txt.

In this file, you can find info about the actions taken by the Startup Repair tool so that you can diagnose and get the problem that caused the error fixed. Here are some reasons why SrtTrail.txt is important:

Troubleshooting: You can use SrtTrail.txt logs to troubleshoot startup issues. There’s a detailed report of the actions taken by the Startup Repair tool, which can help you understand what went wrong during startup.
Identifying the root cause of the problem: The log file can help you get to the core of the startup issue, which can be anything from a corrupted system file to a hardware failure.
Communication: The SrtTrail.txt file can be shared with tech support personnel so they could do their own check to understand the problem better and provide more accurate solutions.
Prevention: Analyzing SrtTrail.txt logs can help you avoid future startup errors since you’ve figured out and fixed the root causes.

As you can see, the SrtTrail.txt log file can be instrumental for diagnosing and getting startup issues fixed in Windows. However, if Automatic Repair can’t fix the underlying issues, you’ll keep seeing the SrtTrail.txt error at boot, landing on the Automatic Repair couldn’t repair your PC screen.

The most common reasons for this error are corrupted or missing system files, but other factors such as disk errors, bootloader corruption, failed updates, or hardware faults can equally prevent Windows from starting up properly.

Download Auslogics BoostSpeed

Your one-stop PC maintenance and optimization tool, this program will clean, speed up, repair and tweak your system to ensure maximum speed and efficiency.

What Is the SrtTrail.txt BSOD Error on Windows 10/11?

Both Windows 10 and 11 come with the Automatic Repair utility, which is built to fix startup failure errors. However, the repair might fail, and you’ll get the SrtTrail.txt blue screen of death error as a result. That said, the SrtTrail.txt error is not a typical stop code but rather an Automatic Repair failure screen that appears when Windows can’t resolve startup issues.

Also read: What to Do if Automatic Repair Couldn’t Repair Your PC

When the error occurs, you’ll be presented with two options: Shut down and Advanced repair. Choosing the latter should boot the computer in Safe Mode. But instead, it may lead to an endless startup-shutdown loop.

The Automatic Repair loop, or boot loop of death (BLoD), is not that uncommon in Windows operating systems.

That’s when your system gets stuck in a cycle of restarting and failing to boot up.

It can be caused by tons of reasons, like corrupted system files, malware infections, hardware failures, or unsuccessful software updates.

When the SrtTrail.txt error occurs, getting inside your operating system and troubleshooting the issue can become a real challenge.

Impact of the SrtTrail.txt Error on Windows OS

The SrtTrail.txt error can significantly impact the Windows operating system by preventing the system from starting up properly and causing data loss or system instability. If the SrtTrail.txt error is not resolved, here’s what you get:

When the SrtTrail.txt error occurs, it can prevent you from accessing your files and programs.
In some cases, the SrtTrail.txt error can result in data loss or corruption, as important files may become inaccessible or damaged during the repair process.
If the SrtTrail.txt error is caused by deeper drive issues, continued attempts to boot might worsen drive health or cause further file system corruption.
If system updates are interrupted by the SrtTrail.txt error , your system may remain exposed to vulnerabilities.

But hey, that’s exactly what we’re here to help you with—to avert the worst. First, let’s take a look at what might be causing the error.

What Causes the SrtTrail.txt BSOD Error on Windows 10/11?

The SrtTrail.txt error typically occurs when there is a problem with the Windows startup process.

More specifically, it happens when Automatic Repair can’t repair the issue that it encountered on startup and creates the SrtTrail.txt log file to document the diagnostic and repair process.

The causes of the SrtTrail.txt error can vary, but here are some of the most common reasons:

Corrupted system files. The SrtTrail.txt error can be triggered if some important system files get corrupted and don’t let Windows start up properly.
Hard drive issues. If the hard drive where the operating system is installed (it is usually drive C) is damaged, the SrtTrail.txt error may pop up.
Malware infections. Malware or viruses can mess with system files and cause the SrtTrail.txt error.
Power failures. Unexpected power failures or surges can damage system files and trigger the SrtTrail.txt error.
Failed Windows updates. Sometimes, when a Windows update fails, it can corrupt some system files or cause conflicts with other software, resulting in the SrtTrail.txt error. A large number of users have also reported this error after installing Windows 10 version 1809. Microsoft then fixed it in a later update.

Other known root causes include bootloader/BCD corruption, incompatible or failing hardware (like RAM or motherboard), driver conflicts or incompatible drivers, registry-hive corruption, and UEFI/BIOS misconfiguration.

You also need to know that the SrtTrail.txt error is often a symptom of something bigger, meaning there’s a deeper issue with the system. To resolve the SrtTrail.txt error, it is typically necessary to identify and deal with this underlying issue causing the startup problem, and that may require further troubleshooting or even professional assistance.

But enough beating around the bush, let’s get started with SrtTrail.txt Windows 10/11 fixes.

Download Auslogics BoostSpeed

Your one-stop PC maintenance and optimization tool, this program will clean, speed up, repair and tweak your system to ensure maximum speed and efficiency.

How to Fix the SrtTrail.txt BSOD Error on Windows 10/11: Before Anything Else

If you are experiencing the SrtTrail.txt error, you can attempt the fixes presented below to get it resolved. However, before we begin, we advise that you perform a backup so you don’t risk losing your files (yes, you can do it even if you can’t boot into Windows). Here’s how:

On the Automatic Repair couldn’t repair your PC screen, select Advanced options.
Select Troubleshoot > Advanced options > Command Prompt.
Attach your external drive and type the following commands one after another, hitting Enter after each:

diskpart list volume DiskPart will show a table of volumes. Identify your external drive by its size or label and note the letter under Ltr.

Type exit to leave DiskPart.
Next, type the following command and hit Enter:

robocopy C:\ E:\Backup /E /ZB

This copies all files and folders—including empty and protected ones—from your local C: drive to the Backup folder on your external drive.

Note

Replace E: with the actual drive letter you noted previously.

If you only want to back up specific folders, use the same robocopy command but replace C:\ with the path to those folders.
After copying, run the following command, replacing E: with your external drive letter:

dir E:\Backup /s

This command shows all files and subfolders inside Backup and counts them at the end.

Check for a reasonable number of files/folders copied and no File Not Found errors.

Now, with peace of mind and your files safely backed up, you’re all set to fix the SrtTrail.txt error.

All the fixes to the SrtTrail.txt BSOD provided in this article work for both Windows 10 and 11.

Fix 1: Disconnect your USB devices

If you have external USB devices connected to the PC, unplug them all and restart the computer. See if that resolves the issue.

Fix 2: Remove and replace your laptop battery

Removing your battery and placing it back after a while may help get rid of the BSOD error. This tweak worked for some users and may work for you as well.

Put back the battery, connect the power cable, and then boot your system to see if the error has been resolved.

Fix 3: Perform a system restore

When your computer restarts several times, you’ll get loaded into the boot menu. Once there, follow the steps below to restore your system to a point when it was functioning without problems:

Note

To perform a system restore, you need to have previously created restore points. If you haven’t created any manually, don’t eat humble pie just yet—Windows usually creates them automatically after updates or any other major changes.

Note, though, that while a system restore will keep your personal files intact, all apps and settings implemented after the restore point date will be removed.

Click Troubleshoot > Advanced options.

Click Troubleshoot > Advanced options» src=»https://www.auslogics.com/en/articles/wp-content/uploads/2024/07/Screenshot-1-2-1.png»></p>
<div class=

Картинка с сайта: www.auslogics.com

Select System Restore from the window that opens.

Select System Restore from the window that opens

Provide administrator credentials if requested.
Click Next to use the current restore point, or select Show more restore points and then click Next.
If you went for the latter option, select a point to which you’d like your system to be restored, and then click Finish to initiate the restore process.

Note

You can click Scan for affected programs to see which apps will be removed after the system restore.

Image credit: Microsoft Support

Can be helpful: [FIXED] System Restore Not Working in Windows 10

Fix 4: Load in Safe Mode and update your drivers

There’s a chance that one or several drivers got corrupted, which may be the cause of the issue you are facing.

If you boot up in Safe Mode with networking, you can access the internet and update drivers manually or with the help of a tool.

Follow the steps below to see if you can get the error resolved this way:

From the boot menu, click Troubleshoot , and then click Advanced options.

From the boot menu, click Troubleshoot, and then click Advanced options

Go to Startup Settings and click Restart.

Go to Startup Settings and click Restart

Tap 5 or F5 to select Enable Safe Mode with Networking.

Tap 5 or F5 to select Enable Safe Mode with Networking

After the system boots in Safe Mode, you will be able to update your device drivers. You can do this manually for each driver by visiting the website of your PC manufacturer.

PRO TIP

However, rather than go through all that trouble, download and install Auslogics Driver Updater to automate the process. The tool is really easy to set up and use.

It will run a full scan of your system to spot any missing, corrupted, or outdated drivers. All that’s required of you is just a click of a button, and it will automatically download and install the latest manufacturer-recommended version of your drivers.

Fix 5: Disable ELAM protection

Windows’ Early Launch AntiMalware (ELAM) driver loads before third-party drivers during startup so that it can intercept malware at the earliest possible point. But if the driver itself becomes corrupted or conflicts with other startup components, it could be the reason for your SrtTrail.txt error. Try disabling it to check if that’s the case. Follow these easy steps:

In the boot menu, click on Troubleshoot.
Select Advanced options > Startup Settings. Click Restart.

Select Advanced options > Startup Settings» src=»https://www.auslogics.com/en/articles/wp-content/uploads/2024/07/Screenshot-4-4-1.png»></p>
<div class=

Картинка с сайта: www.auslogics.com

Upon restart, you’ll get a list of options. Select Disable early launch anti-malware protection.

Select Disable early launch anti-malware protection

Restart your computer.

If you can boot successfully, uninstall any third-party antivirus softwar e from your computer and re-enable ELAM. The issue will likely be resolved.

How to Fix the SrtTrail.txt BSOD Error on Windows 10/11 Using the Command Prompt

If the fixes above didn’t work out, well, it’s time to roll up the sleeves and dig deeper. Running CMD commands like bootrec.exe , CHKDSK , and a few more is a proven SrtTrail.txt Windows 10/11 fix that has helped a lot of users, so try each of them in the presented order to see which one will resolve the error in your case.

Fix 6: Run bootrec.exe commands in Command Prompt

Bootrec.exe is the command-line tool in the Windows Recovery Environment (WinRE) that lets you repair critical boot components—like the Master Boot Record (MBR), boot sector, and Boot Configuration Data (BCD) store. Running them can restore or rebuild corrupted boot files and configuration data if the SrtTrail.txt error is triggered by bootloader issues. Try fixing the error by running a few commands via the Command Prompt. Here’s how:

From the boot menu, select Troubleshoot.
Click Advanced options.
In the window that opens, select Command Prompt.

Now you have to run the following commands, one after the other. Type the first one into the window and press Enter. After it executes, do the same for the other two that follow:

bootrec.exe /fixmbr 
bootrec.exe /fixboot 
bootrec.exe /rebuildbcd

Fix 7: Run the CHKDSK command

CHKDSK is a repair tool that scans for and fixes faults in your hard disk drive that may be causing the SrtTrail.txt error. To run it, you have to know the letters of your drive (for instance, C: or D: ).

Follow the steps in Fix 6 to open the Command Prompt.

In the window that appears , enter the following command and press Enter:

chkdsk /r C:

Note

Replace C: with your actual drive letter.

Restart your computer and see if the error has been resolved.

Fix 8: Disable Automatic Repair

Although this solution will not actually resolve the SrtTrail.txt error , it may help you skip the Automatic Repair couldn’t repair your PC screen and boot into Windows normally and troubleshoot the underlying issues from there. Follow these simple steps to get it done:

From the boot menu, select Troubleshoot > Advanced options.
Click Command Prompt.

In the window that opens, type in the following command and then press Enter to execute it:
bcdedit /set {default} recoveryenabled No

Wait for the process to finish, and then try booting your computer.

If you can get past the Automatic Repair screen (yay!), it almost always means your bootloader and hardware are basically intact—but some critical system files or the component store have become corrupted or inconsistently updated.

This usually stems from a failed or interrupted Windows update, an unexpected shutdown, or disk write errors that broke key system binaries.

In most cases, running SFC and DISM scans at this point can fix the issue for good. That said, whether you can boot into Windows or are still stuck on the Automatic Repair screen, all roads lead to the next fix.

Fix 9: Run SFC and DISM scans

In case you get the error due to your image or system files being corrupted, another SrtTrail.txt Windows 10/11 fix you should try is running SFC (System File Checker) and DISM (Deployment Image Servicing and Management) scans.

If you managed to boot into Windows using the tips from the previous fix, click Start , search for cmd , right-click Command Prompt , and select R un as administrator.
If not, use the already familiar Troubleshoot > Advanced options > Command Prompt path from the WinRE screen.
Enter the following command in the window that opens and press Enter:sfc /scannow
Wait for the scan to complete. It might take some time.

Next, you need to run the following command by typing it in and pressing Enter:

DISM.exe /Online /Cleanup-image /Restorehealth

Again, allow the process to finish and apply fixes if it finds any issues, and then restart your computer after it’s done.

This fix should resolve the issue. But if it persists, don’t worry just yet. Move on to the next one.

Fix 10: Repair the Windows registry

A corrupted Windows registry could be the cause of the error in discussion. And although Microsoft disabled automatic registry-hive backups on Windows 10 (build 1803+) and later, it’s still worth a shot. Try these steps to fix the corrupted registry :

Select Command Prompt under Advanced options in the boot menu.
Type the following command into the Command Prompt window and press Enter:

copy C:\Windows\System32\Config\RegBack\* C:\Windows\System32\Config\

Close the window, and then restart your computer.

Fix 11: Delete the problematic file

Here’s what you have to do:

Click Troubleshoot from the boot menu and select Advanced options .
Select Command Prompt.
Input the following commands, pressing Enter after each one:

C:
cd Windows\System32\Logfiles\Srt
notepad SrtTrail.txt

You’ll see something like this: Boot critical file C:\Windows\System32\drivers\vsock.sys is corrupt. In this case, it shows that the vsock.sys file is corrupt. Note the path to the file.

Now enter the following commands in the Command Prompt window, pressing Enter after each one:

cd c:\Windows\System32\drivers
ren vsock.sys vsock.sys.bak

Note

Replace the path and file name in the commands with the ones you noted in the previous step.

The ren command will rename the corrupted file and force Windows to replace it automatically. Renaming instead of deleting will preserve the file in case you need to restore it later.

Restart your computer. If you can boot normally, uninstall the application that’s associated with the file you deleted. (In this example, the application was VMware.)

Restart your computer. If you can boot normally, uninstall the application that’s associated with the file you deleted. (In this example, the application was VMware.)

Fix 12: Fix your device partition

You could be experiencing the SrtTrail.txt error because your bootloader’s device or osdevice entries point to the wrong partition. Follow the steps below to fix it:

Under Advanced options in the boot menu, select Command Prompt.
Now, type bcdedit and press Enter.

In the result that appears , under the Windows Boot Loader section, check if both device and osdevice show partition=C: . If either value is different, run the following commands (press Enter after each one):

bcdedit /set {default} device partition=c:
bcdedit /set {default} osdevice partition=c:

Restart your computer.

Download Auslogics BoostSpeed

Your one-stop PC maintenance and optimization tool, this program will clean, speed up, repair and tweak your system to ensure maximum speed and efficiency.

How to Fix the SrtTrail.txt BSOD Error on Windows 10/11: Advanced Methods

Fix 13: Perform some tweaks in the BIOS

Set boot prioritySometimes, if your main hard drive is not set as the primary boot device, it could trigger the error. Follow these steps to set the right boot priority in your BIOS:

Enter the BIOS. Look up how to do that for your PC model. It usually involves pressing one of the following keys repeatedly when your computer is about to boot: F1, F2, F8, F10 , Del, or Esc.
Locate the Boot section and then see that the hard drive on which your Windows 10/11 is installed is set as the first boot device.
Save the change you made and exit the BIOS.

Enable the Execute Disable Bit

If you have the Execute Disable Bit disabled, this can also be the reason you can’t boot properly. Here’s how to enable it:

Go to the Security tab in the BIOS.
Locate XD-bit, XN, or NX and enable it.
Save the changes and restart your computer.

Change the disk (SATA) controller mode

Changing the SATA controller mode can fix boot errors if Windows is expecting a different mode (for instance, AHCI vs. RAID).

Enter the BIOS.
Locate the SATA Controller Mode option and change the setting from AHCI or RAID to Standard.
Save the changes and reboot your computer.

If you still get the error, set the value back to its default (AHCI or RAID).

Fix 14: Reconnect your hard disk

You may be able to get rid of the SrtTrail.txt error by unplugging your hard disk and then plugging it back in. This fix has worked for some users and may do the trick for you as well.

Warning:

I only recommend proceeding with this and the following method for tech-savvies who know their way around hardware. Otherwise, you’re better off asking for the help of an expert to avoid doing permanent damage to your computer.

Here’s what you have to do:

Turn off your computer.
Disconnect the power cable and—if you’re using a laptop—remove your laptop battery.
Open the computer casing and detach the hard drive.
Reconnect the hard drive and make sure it sits properly. Secure all loose screws and cover up the computer (and if needed, place back the laptop battery).
Now plug the power cable back in.
Boot the PC and see if the error has been resolved.

If there is more than one hard disk on your computer, disconnect and reconnect all of them.

Fix 15: Remove and reconnect your memory modules

Removing and reconnecting your RAM may be another useful SrtTrail.txt Windows 10/11 fix.

Follow these steps:

Turn off your computer.
Remove the laptop battery (if needed) and unplug the power cable.
Open up the computer casing and detach all your memory modules.
Reconnect the modules and cover the computer casing.
Place back the laptop battery (again, if needed), reconnect the power cable, and boot the computer. See if the issue has been resolved.

Fix 16: Reset your system

Resetting your PC can help you get rid of the SrtTrail.txt error. I strongly recommend performing a backup (check out how to do it earlier in the article) before attempting this fix to avoid losing important personal files and apps. Follow these steps to reset your PC:

In the boot menu, select Troubleshoot > Reset this PC.

In the boot menu, select Troubleshoot > Reset this PC» src=»https://www.auslogics.com/en/articles/wp-content/uploads/2024/07/Screenshot-9-3.png»></p>
<div class=

Картинка с сайта: www.auslogics.com

Here, you have two options: Keep my files and Remove everything.

Selecting the former will remove your installed apps and settings, but your personal files will not be affected. You should go with this option first to repair the system with minimal loss and proceed with the latter if you keep seeing the error after the reset.

Fix 17: Perform a clean install

If the blue screen of death error persists after you’ve attempted all the fixes presented above, then the last option you have is to perform a clean install of your Windows 10 or Windows 11 OS.

Tips for Preventing the Windows SrtTrail.txt Error

Here are some tips for preventing the SrtTrail.txt error from occurring:

Keep your operating system up to date by regularly installing Windows updates. Those updates come with patches for bugs and security vulnerabilities.
Use reliable antivirus software, and don’t forget to keep it updated.
Only download and install software from trusted sources, and carefully read the installation instructions before proceeding.
Avoid making changes to system files or registry settings unless you know what you are doing. Making incorrect changes to these files can cause serious system errors.
Regularly back up your important data to an external hard drive or cloud storage service. This can help ensure that you don’t lose important files during a system error or other issues.
And finally, if you do encounter the SrtTrail.txt error, don’t panic. You can find all the answers you need to troubleshoot and fix the issue in this article.

Download Auslogics BoostSpeed

Your one-stop PC maintenance and optimization tool, this program will clean, speed up, repair and tweak your system to ensure maximum speed and efficiency.

The SrtTrail.txt BSOD Error on Windows 10/11: Fixed

We hope this guide has helped you in resolving the SrtTrail.txt BSOD error. To avoid facing such issues in the future, ensure you have a strong antivirus program on your PC and also run regular system maintenance checks . If you have any comments or a better SrtTrail.txt Windows 10/11 fix , please don’t hesitate to share them in the section below. We’d like to hear from you!

FAQ

SrtTrail.txt is a log file that is generated when you run into a startup error.

You can find the SrtTrail.txt file at C:WindowsSystem32LogfilesSrtSrtTrail.txt.

To exit the SrtTrail.txt error loop, try booting into Safe Mode and running startup repair tools, using bootrec.exe commands, or performing a system restore. If those don’t work, you might need to go for a full reset.

Your PC keeps entering Automatic Repair because it detects something wrong with the startup process—like corrupted system files, faulty drivers, disk errors, or a bad Windows update, often leading to the SrtTrail.txt error.

This path points to a log file where Windows records details about why the startup failed. If you’re seeing the SrtTrail.txt error, it’s Windows trying to help you diagnose what’s preventing a normal boot.

From the Automatic Repair couldn’t repair your PC screen, go to Advanced options > Startup Settings > Restart. Then choose Enable Safe Mode or Enable Safe Mode with Networking.

Yes, it’s safe—but it won’t fix the error. The SrtTrail.txt file is just a log file. Focus on repairing the real problem instead of just deleting the file.

If the Command Prompt won’t open, you’ll need to use Windows installation media (USB/DVD) to boot your PC and access troubleshooting tools, including Safe Mode and repair options.

It might! If you have restore points available from before the problem started, doing a system restore can undo system changes causing the SrtTrail.txt error.

If nothing works, the issue could be more serious—like a failing hard drive, deep system corruption, or even hardware failure. In that case, a clean Windows reinstall or professional help may be the safest bet.

Источник

While facing a problem in Windows 10, users attempt to try Startup Repair, but unfortunately, they get SrtTrail.txt Windows 10 Error on the PC screen. Microsoft included its own repair tool to provide the best service for their users. But some issues are really troublesome and SrtTrail.txt is one of them. However, you can fix it by trying out some promising workarounds.

Basically, Automatic Repair comes along with Windows and holds the ability to fix startup failure errors. So, when the operating system fails to boot properly, Automatic Repair option comes to rescue and makes an effort to repair Windows all by itself. However, it also has certain limitations and sometimes fails to work and displays the below error. Many times it goes into a loop of recurrent startup and Shutdown. The SrtTrail.txt Windows 10 Error may also occur with Blue Screen of Death.

Automatic Repair couldn’t repair your PC.
Press “Advanced options” to try other options to repair your PC or “Shut down” to turn off your PC.
Log file: C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt

SrtTrail.txt Windows 10 Error with Automatic Repair Loop

If you are experiencing the same, this context may help you to resolve the issue.

Fix-1: Run Command Prompt from Boot option

When your computer restarts several times, you will come across Windows 10 Boot options menu. Do the following once it appears.

Step-1: Choose Troubleshoot from the “Boot menu” and when the next page shows up select Advanced Options.

Step-2: Now, do a click on Command Prompt from the visible list.

Step-3: When it appears in the display, type the following command one by one. Ensure to press Enter after each command in order to run it.

bootrec.exe /rebuildbcd

bootrec.exe /fixmbr

bootrec.exe /fixboot

Step-4: Additionally, you can execute chkdsk command as well. This is a repair tool that scans faulty driver and repairs it. To run this command, you need to check and ensure the drive letters of your “hard disk partitions”. Once you check the letters, type the following in Command Prompt.

chkdsk /r C:

chkdsk /r D:

You have to perform this for every drive of your PC.

Step-5: Finally, restart Windows 10 PC and check if the issue still persisting or not.

Fix-2: Run Command Prompt through Safe Mode

Many times, SrtTrail.txt Windows 10 Error might cause because of a bad driver, for example, wireless Logitech mouse. In that case, you may follow this workaround –

1. When the “Boot Options Menu” appears while multiple attempts of restarting, select Troubleshoot and then make a click on Advanced Options.

2. When the new page comes into the view, click the section Startup Settings from there.

3. Now perform a click on Restart. This time your computer will ask you to choose an option from the visible list. Select the option namely “Enable Safe Mode with Networking“.

4. Once the system gets started in “safe mode“, download the updates of that driver which is giving you trouble. In case you have failed to get the updated driver, try to grab it from manufacturer company.

5. Now, type in cmd in Cortana search box and make a right click on Command Prompt when the search result appears. Then select Run as administrator.

6. When Command Prompt rolls onto the screen, write the following command after blinking cursor and press Enter.

DISM /Online /Cleanup-Image /RestoreHealth

7. The process may take few minutes to finish. Once it’s done, Restart your computer.

8. In the end, when your PC starts again, install the driver you just downloaded.

Hopefully, it will resolve the SrtTrail.txt Windows 10 Error. If you are facing problem to find the bad driver, then you can try this workaround by skipping (step 4 & step 8).

You may like to read SFC /Scannow, DISM.Exe, CHKDSK Windows 10.

Fix-3: Disable Automatic Startup Repair

This is the easiest solution to resolve SrtTrail.txt error.

• While the PC tries to restart few times, you will notice the Boot Menu. Access it when appears.

• Choose Troubleshoot from there and make a hit on Advanced Options.

• Thereafter select Command Prompt from the list of options that show up on the PC screen.

• Once Command Prompt comes in the sight, copy the following command and paste after blinking cursor.

bcdedit /set {default} recoveryenabled No

• To run the command, press Enter.

Now, give a shot and try to run your Windows 10.

Fix-4: Repair Corrupted Windows registry

If your system has corrupted registry file, this may lead to this SrtTrail.txt Windows 10 Error too. In that case, you have to restore your registry. Here’s how –

Access to the Boot Menu and start “Command Prompt”.

While Command Prompt appears, copy (Ctrl+C) the following lines and paste (Ctrl+V) it after blinking cursor.

copy c:windowssystem32configRegBack* c:windowssystem32config

Now, press Enter to run the command. If it asks to overwrite the file, write down all and again hit Enter.

At last, type exit in the Command Prompt in order to close it.

Finally, reboot your PC once you are over with the above steps.

Fix-5: Disable early launch anti-malware protection

Early launch anti-malware (ELAM) protection might also cause to the pop-up of SrtTrail.txt Windows 10 Error. Let’s see how you can disable it –

Follow this order like previously shown way while your computer display Boot Menu-

Troubleshoot > Advanced Options > Startup Settings.

Now, the machine will restart and this time it will display certain options from where you have to choose one.

Select Disable early launch anti-malware protection from the list.

In the end, Restart your PC to check occurrence of the issue.

After completing the process, if you still get the trouble, perform the steps again. And also uninstall third-party antivirus software from the computer. Hopefully, the PC will go back to normal after that.

Fix-6: Dispel the problematic file

You might get SrtTrail.txt Windows 10 Error due to problematic files. To dispel this from your computer, go through these steps –

• After several attempts to restart, the Boot Menu will appear in the PC screen.

• Make a click on Troubleshoot and thereafter pick up Advanced Options. After that choose Command Prompt from the list.

• When Command Prompt is visible into the display, write down the following –

C:

cd WindowsSystem32LogFilesSrt

SrtTrail.txt

• It will open a file that shows something similar to this “Boot critical file c:windowssystem32driversvsock.sys is corrupt”. Which means vsock.sys is the corrupted file and it was causing the issue. We are using this just for example; you may get another result according to your system.

• Once you get the problem, you will have to remove it. To do so, navigate the desired location through Command Prompt. Type in or copy/paste the following and press Enter after each line.

cd c:windowssystem32drivers

del vsock.sys

Note- Before deleting, make sure the file you are removing is not any default data of Windows 10. Otherwise, it may cause more damage.

When you are done with everything, Restart the computer and uninstall the application that was creating the problem. In our cases it was VMware.

Fix-7: Check device partition

If the values of your device partition are incorrect, you may face SrtTrail.txt Windows 10 Error. In that situation, you need to observe the below-given steps-

1. Launch Command Prompt through Boot Menu.

2. Type the following and press Enter to run the command.

Bcdedit

3. Once the result appears, locate the device and check the values. If the values are partition=C: then it’s alright.

4. If the values are different, you have to set it correctly. To do so, again type down or copy-paste the following line in Command Prompt and hit Enter after each one.

bcdedit /set {default} device partition=c:

bcdedit /set {default} osdevice partition=c:

Now, Restart your PC to save the changes.

Fix-8: Refresh or Reset your PC

If you still unable to bypass the issue, then you might “refresh or reset” the computer in order to resolve it. Though “Refresh your PC” will remove all the apps you installed but the settings and Universal apps will be saved. In the other hand, “Reset your PC” will eradicate everything including your apps, settings. So, keep the backup of your important files before proceeding further.

When your computer displays the Boot Menu, make a click on Troubleshoot.

Choose between Refresh or Reset your PC options.

Now follow the instructions properly to complete the process. Ensure to have “Windows 10 media installation” because you may need it while processing.

Fix-9: Check boot priority in BIOS

You can resolve SrtTrail.txt Windows 10 Error without a disc too. For that, you have to check that if boot priority is set properly in BIOS. If it’s not then you need to change the settings and here is the procedure.

• When your computer boots, keep pressing any key from “F1, F2, F3, Del, Esc“. You have to do it quickly in order to enter BIOS.

• Now, locate “Boot section” on your own as you will find a different location for each BIOS here.

• Once you locate the boot section, check whether the hard drive is set as a”First boot device“. In case, if you use several hard drives then set the drive where you installed Windows 10.

• In the end, save the changes and make an exit from BIOS.

Fix-10: Reconnect your hard disk

A substantial number of users have reported that they have managed to bypass SrtTrail.txt Windows 10 Error by reconnecting their hard drive. To do so follow the below procedure –

At first turn off your computer, disconnect the plug and open it to detach the hard disk.

Thereafter do the reverse. Reconnect the hard disk again, give connection through the power cable and turn on your PC. Probably your problem will vanish this time.

If you are using more than one hard disk then you have to do the same with each one.

In addition, if you want to keep only one drive and disconnect the others that will also work. Just keep the driver which has Windows 10 installed and disjoint others. If your problem is solved, you can connect it again.

Fix-11: Remove your laptop battery

If you are using a laptop then detaching the battery for a while may help you. It may sound silly but some users resolved the issue with this tweak. To do this, simply take out the battery from the laptop and again put it back. Now connect the power cable and turn on the laptop to check if the problem is resolved.

See Windows 10 – How to Boost Laptop Battery Life.

Fix-12: Remove your RAM

Removing the Ram might be helpful in this issue too. It is as simple as reconnecting the “hard disk”.

Simply “turn off the PC”, unplug the power cable and remove your “memory modules“.

After that reconnect the memory module again and perform a reverse procedure to turn on your computer.

Follow the same for each and every RAM in case you are using multiple.

Read How to Check Ram Type in Windows 10 like DDR, DDR2.

Fix-13: Change your disk controller mode in BIOS

You can also get rid of the error by entering BIOS and changing some settings. To do this perform the following –

• In the beginning access BIOS.

• Now locate disk controller mode. Once you find it, set it to Standard instead of AHCI or RAID.

• Save the modifications and henceforth reboot the computer.

If the error still exists, change the mode again. It might help but if you face this error after that then set back the value of disk controller mode to its original.

Fix-14: Disconnect Additional USB drives

If you are connected with several USB drives, then disconnect them to settle SrtTrail.txt issue. Just unplug all the external USB and Restart your computer. Check if the error is fixed.

Fix-15: Enable NX, XD or XN in BIOS

Enter BIOS and shift to the Security tab.

Find out the option XD-bit and Enable it.

If you don’t get XD option then try to locate NX or XN. Once you get it, make them enable.

At last, Restart your computer after saving the changes.

Fix-16: Perform Clean Install

If any above method didn’t work for you then “clean install” may help you in this case. It will remove all the data that is stored in the system partition. Though it’s not a wanted solution. But when every other method fails to resolve the issue, you don’t have a choice.

For reference, follow How to Clean Install Windows 10 1803 Latest April 2018 Update.

That’s all. SrtTrail.txt Windows 10 Error is one of the major issues as it makes your computer useless. Let us know which procedure helped you to resolve it.

Источник

Выясняем, с чем связана ошибка SrtTrail.txt и как ее можно исправить.

Из-за чего вообще возникает такая ошибка? Суть кроется в работе механизма восстановления операционной системы Windows. Когда какие-то базовые файлы повреждаются, ОС пытается автоматически их «починить». Но иногда процедура восстановления пытается включиться автоматически, но не запускается. Только отзывается ошибкой в файле SrtTrail.txt.

Получается, что сбой проявляется, когда повреждается не только сама операционная система. Под удар попадают и встроенные средства восстановления файлов и загрузчика. При этом однозначно назвать причину возникновения ошибки невозможно. Придется попробовать сразу несколько методов. Все они описаны ниже.

Отключаем всю периферию

На нормальную загрузку механизмов восстановления ОС могут повлиять подключенные устройства. Речь идет о мышках, клавиатурах, флешках и других гаджетах, подключаемых извне через USB.

В первую очередь стоит попробовать отключить все эти устройства и дождаться, пока средство восстановление Windows успешно запустится и начнет работу. Уже после этого можно обратно вставить мышь и клавиатуру, чтобы закончить процедуру исправления ошибок и сбоев.

Загрузка …

Сбрасываем настройки компьютера с помощью извлечения батареи и памяти

Сбросить параметры ноутбука, например, можно с помощью извлечения батареи. Аналогичный эффект имеет временное отключение оперативной памяти.

Выключаем компьютер и достаем планку ОЗУ.
Затем ставим ее в другой слот.
Достаем оперативную память.
Перезагружаем компьютер.

Иногда помогает.

Загрузка …

Восстанавливаем загрузчик операционной системы

Систему можно восстановить с помощью специальной «спасательной» флешки. Это USB-накопитель с дистрибутивом Windows. Если у вас такого нет, его можно создать на другом рабочем компьютере, у друзей или коллег.

Для этого:

Скачиайте средство создания загрузочной флешки с сайта Microsoft.

Страница для загрузки утилиты записи Windows

Эта кнопка находится внизу страницы

Запустите скачанный файл.
Нажмите на кнопку «Принять», когда появится экран с условиями соглашения.

Стартовый экран создания загрузочной флешки

На следующем этапе поставьте галочку напротив строчки «Создать установочный носитель (USB-устройство флэш-памяти, DVD-диск или ISO-файл)».

Выбираем второй вариант

Потом поставьте галочку напротив пункта «Использовать рекомендуемые параметры для этого компьютера». И перейдите далее.

Нас устраивает такой набор опций

Выберите пункт «USB-устройство флэш-памяти» и вставьте в компьютер накопитель объемом не меньше 8 гигабайт.

Указываем тип носителя

На экране появится список подключенных USB-носителей. Выберите тот, на который будем записывать образ ОС.

Ожидаем окончания процесса записи

Теперь, когда у вас есть работающая загрузочная флешка, перейдите к следующему шагу.

Перезагрузите компьютер.
Во время запуска нажмите на одну из клавиш:
- F11 — для материнских плат MSI, AsRock и для ноутбуков Sony Vaio.
- F12 — для материнских плат Gigabyte и для ноутбуков Acer, Dell, Lenovo.
- F8 — для материнских плат ASUS.
- Escape — для материнских плат Intel и для ноутбуков ASUS.
В появившемся интерфейсе выберите флешку с дистрибутивом Windows. Наведите на нее курсор (стрелками) и нажмите на клавишу Enter.

Это Boot Menu

В появившемся интерфейсе найдите кнопку «Восстановление системы» и нажмите на нее.
Затем найдите пункт «Командная строка».
В открывшийся терминал поочередно введите команды:
- bootrec /rebuildbcd
- bootrec /fixmbr
- bootrec /fixboot
- bootsect /nt60 SYS
- bootsect /nt60 ALL
Затем перезагрузите компьютер.

Если описанный выше метод не помог, то есть еще несколько вариантов вернуть загрузчик в базовое состояние. Исправить вместе с тем все ошибки. Попробуйте один из них, прежде чем переходить дальше.

Загрузка …

Если система работает корректно и ошибка возникает именно из-за режима восстановления, то можно попытаться отключить этот режим.

Как мы уже выяснили выше, этот механизм запускается автоматически. Причем иногда в не самое подходящее время, то есть когда система функционирует нормально и вовсе не требует восстановления.

Чтобы отключить автоматический запуск системы восстановления Windows:

Выполняем шаги, описанные в предыдущем разделе статьи, чтобы вновь открыть командную строку.
Оказавшись в консоли, вводим следующую команду: bcdedit /set {default} recoveryenabled No.
Затем нажимаем на клавишу Enter и перезагружаем компьютер.

Во время следующего запуска компьютер уже не будет пытаться запустить средство восстановления ОС. Возможно, это поможет нормально загрузиться в Windows, игнорируя ошибки в файле SrtTrail.txt.

Загрузка …

Переустанавливаем драйверы

Иногда ошибка SrtTrail.txt возникает из-за сбоя в одном из драйверов. Чаще всего под раздачу попадает фирменное программное обеспечение для мышей и клавиатур. Лучше всего попробовать обновить или переустановить их в безопасном режиме. См. также: как зайти в безопасный режим в Windows 10.

Для этого:

Перезагружаем компьютер.
В ходе загрузки одновременно жмем на клавиши Shift + F8.

Здесь находятся основные функции восстановления системы

В появившемся меню выбираем пункт «Поиск и устранение неисправностей».
В следующем окне кликаем по подменю «Дополнительные параметры».
Потом выбираем опцию «Параметры загрузки».

Расширенные настройки режима восстановления Windows 10

Переходим к изменению параметров загрузки

Нажимаем на кнопку «Перезагрузить» в нижней части экрана.
Во время следующей загрузки нажимаем на клавишу F4.

Экран выбора режим загрузки операционной системы

Нам нужен безопасный режим

Загрузившись в Windows, нажимаем клавиши Win + R.
В появившемся окошке вводим слово devmgmt.msc и нажимаем клавишу Enter.

Это короткий путь к диспетчеру устройств

Ищем среди устройств мышь. Кликаем по ней правой кнопкой мыши.

Видеоадаптер указан чисто для примера

В появившемся контекстном меню выбираем пункт «Обновить» (или «Удалить», если хотите установить драйвер заново).

Вот и нужные пункты

Дожидаемся окончания обновления (удаления). А затем перезагружаем компьютер.

Загрузка …

Восстанавливаем базовые параметры системы

Есть несколько распространенных команд, которые используются для исправления часто встречающихся ошибок. Можно попробовать активировать их, если предыдущие способы ничем не помогли.

Загрузка …

Очищаем систему в безопасном режиме

Заходим в безопасный режим (как в него зайти, можно прочитать в предыдущем разделе статьи). Потом делаем следующее:

Открываем встроенный поисковик, нажав на иконку в виде лупы справа от меню «Пуск».
Вводим туда название программы cmd.exe.
Запускаем ее от имени администратора.

Можно запустить терминал любым другим способом, как вам удобно. Но важно сделать это от имени администратора.

Появится консоль. Вписываем туда команду: DISM /ONLINE /CLEANUP-IMAGE /RESTOREHEALTH и нажимаем на клавишу Enter.

Восстанавливаем базовые параметры реестра

Также стоит попробовать восстановить базовые параметры реестра. Для этого открываем терминал, но вводим туда другую команду: __ xcopy c:\windows\system32\config\RegBack c:\windows\system32\config__

После этого перезагружаем компьютер и пытаемся загрузиться в обычном режиме.

Выключаем антивирус

Иногда нормальному запуску системы мешает антивирус. В этом случае стоит попробовать отключить его. Правда, перед этим придется запустить ОС в безопасном режиме, а после этого удалить антивирусное ПО полностью или хотя бы отключить его автоматический запуск.

Инструкция по отключению для Avast.
Инструкция по отключению для встроенного антивируса Windows.

На этом все!

Загрузка …

Post Views: 26 614

Источник

$Startup Repair couldn't repair your PC Press "Advanced options" to try other options to repair your PC or "Shut down" to" to turn off your PC. Log file: C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt$

Error text: Startup Repair couldn't repair your PC
Press "Advanced options" to try other options to repair your PC or "Shut down" to" to turn off your PC. Log file: C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt

If you are facing the error “Startup Repair couldn’t repair your PC” with the log file C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt, this guide will guide you to fix it without much effort. The SrtTrail.txt log file error indicates issues with your system files, boot configuration, or hard drive. Follow the steps below to fix it effectively.

1. Access the Automatic Repair Screen

Trigger Automatic Repair: Restart your computer and let it crash consecutively (usually 2–3 times) during startup. Windows will eventually display the “Automatic Repair” screen.
Click Advanced options > Troubleshoot > Advanced options > Command Prompt.

The “Command Prompt” option in the Advanced options menu lets you directly execute commands to repair system files and restore the bootloader. To do that, we have done this step.

to fix SrtTrail.txt startup repair error, go to command prompt from automatic repair screen first.

2. Check for and Fix Hard Drive Errors

Access Command Prompt: After selecting your username and entering your password (or clicking Continue if no password is set), type the following command and press Enter:

chkdsk /f /r C:

The chkdsk /f /r command identifies and repairs bad sectors in your hard drive and file system errors, often the root cause of boot issues.

Once completed, type:

exit

Press Enter and select Continue to restart your PC.

fix SrtTrail.txt startup repair by fixing the bad sectors in hard disk of the machine.

3. Repair the Bootloader

If the previous step doesn’t resolve the issue, return to the Command Prompt and perform these commands:

Type the following commands one by one, pressing Enter after each:

bootrec /fixmbr
bootrec /fixboot
bcdedit /export c:\bcdbackup
attrib c:\boot\bcd -h -r -s 
ren c:\boot\bcd bcd.old
bootrec /rebuildbcd

When prompted to add an installation to the boot list, type y and press Enter.
Finally, type the below command, press Enter, and select Continue.

exit

These commands rebuild and repair the Boot Configuration Data (BCD), ensuring your system has a valid bootloader.

Rebuild and repair the boot configuration data to resolve the SrtTrail.txt startup repair error in Windows.

4: Restore the Registry Files

Registry corruption can also cause boot failures. Restoring a backup replaces faulty registry files with previously saved versions. If the issue persists after the above steps, follow these steps also:

Open Command Prompt and type:

C:
cd c:\Windows\system32\config

Create backups of the current registry files:

md backup
copy *.* backup
md backup1
copy *.* backup1

Navigate to the regback folder and restore previous registry files:

cd regback
dir
copy *.* ..

When prompted to overwrite files, type all and press Enter.

Exit the Command Prompt with the below command and Select Continue to restart your PC.

exit

restoring the registry files can sometimes resolve the startup repair error in Windows.

By following the above steps, you should be able to resolve the “Startup Repair couldn’t repair your PC Press “Advanced options” to try other options to repair your PC or “Shut down” to” to turn off your PC. Log file: C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt” error.

Blazing Fast Hosting

Experience lightning-fast speeds and rock-solid reliability with our cPanel hosting. Get your website online today!

Get Started Now

Common Doubts

What is a SrtTrail.txt file?
SrtTrail.txt is a log file found at C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt, created by Windows during Startup Repair. It is vital for diagnosing boot errors and recording repair actions.

Can I open the SrtTrail.txt file to understand the error?
Yes, you can view the file using Command Prompt. Type the following:

notepad C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt

What happens if none of the solutions work?
If the problem persists after trying all the steps, consider performing a system restore to revert the PC to a previously working state.

Источник