Virtio win guest tools windows 7

Driver installation

Remember to be cautious when installing or updating drivers, as improper installation or incompatible drivers can cause system instability. Make sure you have the correct driver for your hardware, and back up your data before making any significant changes to your system.

Variant 1: using the Installation Wizard

This is the best option for regular users that just want to install the drivers on their VM

1. Download Virtio-Win ISO:

   • Visit the official Virtio-Win repository (https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/latest-virtio/virtio-win.iso) and download the latest Virtio-Win ISO file to your host machine.

2. Attach the Virtio-Win ISO to the VM:

   • Ensure your VM is powered on and running.
   • In the VM management software (e.g., VirtualBox, VMware, QEMU, etc.), locate the option to attach the Virtio-Win ISO as a virtual CD/DVD drive to the VM. The specific steps may vary depending on the virtualization software you’re using.

3. Inside the VM:

   • Access the VM’s desktop or file system.

4. Open File Explorer:

   • Open File Explorer (Windows Explorer) within the VM.

5. Navigate to the Virtio-Win ISO:

   • In File Explorer, locate and click on the virtual CD/DVD drive where the Virtio-Win ISO is mounted. It should be listed under «This PC» or «Computer.»

6. Launch the Installation Wizard:

   • Inside the Virtio-Win ISO, locate the virtio-win-guest-tools-xxx.exe (where «xxx» represents the version number) file and run it by double-clicking it. This file contains the Virtio-Win drivers and the Installation Wizard.

7. Select Components:

   • The Virtio-Win Installation Wizard will launch. It will prompt you to select the components you want to install, such as network drivers, storage drivers, and balloon drivers. You can choose to install all available drivers by default or select specific components based on your requirements. Click «Install» to proceed.

8. Driver Installation:

   • The Installation Wizard will begin to install the selected drivers. You will see progress bars for each driver component being installed.

9. Reboot the VM (if prompted):

   • After the drivers are installed, the Installation Wizard may prompt you to reboot the VM for the changes to take effect. If prompted, save your work and restart the VM.

10. Verify Driver Installation:

    • After the VM restarts, check Device Manager to ensure that the Virtio-Win drivers are correctly installed. There should be no unknown devices or driver-related errors.

Installing drivers required for Windows installation, such as hard disk drivers

1. Prepare Driver Files:

   • Before you begin the Windows installation, you’ll need to have the necessary driver files for your hardware component ready. This usually includes the hard disk or storage controller drivers. Download these drivers from the manufacturer’s website.

2. Insert Windows Installation Media:

   • Insert the Windows installation media (DVD or USB) into your computer and boot from it. You may need to access the BIOS/UEFI settings to set the boot order to prioritize the installation media.

3. Start the Windows Installation:

   • Power on or restart your computer to initiate the Windows installation from the installation media. If it doesn’t start automatically, you may need to press a key (e.g., F2, F12, Delete) to access the boot menu and select the installation media.

4. Language and Region Settings:

   • In the initial Windows setup screen, select your preferred language, time format, keyboard layout, and click «Next.»

5. Click «Install Now»:

   • On the next screen, click «Install Now» to start the Windows installation.

6. Accept License Terms:

   • Read and accept the Microsoft Software License Terms.

7. Choose Installation Type:

   • Select «Custom: Install Windows only (advanced)» as you will be specifying driver installation manually.

8. Partitioning and Drive Selection:

   • In the «Where do you want to install Windows?» window, you may not see your hard disk or storage device listed if it’s not recognized. Click «Load Driver.»

9. Load Drivers:

   • The «Load Driver» window will open. Insert the USB flash drive or attach the Virtio-Win ISO containing the driver files you prepared earlier.

10. Browse for Drivers:

    • Click «Browse» and navigate to the USB flash drive to find the driver files you downloaded. Select the appropriate driver and click «Next.»

11. Install the Driver:

    • Windows will load the driver. Once the driver is loaded successfully, you should see your hard disk or storage device listed in the installation window.

12. Select the Drive:

    • Choose your hard disk or storage device and click «Next.»

13. Complete Windows Setup:

    • Continue with the Windows setup, which includes creating or signing in with a Microsoft account, setting up your preferences, and configuring your system settings.

By following these steps, you can successfully install the required drivers, such as hard disk drivers, during the Windows installation process. This ensures that your storage devices are recognized, allowing you to proceed with the installation and use your computer as intended.

Variant 2: using Device Manager

1. Plug in the Device: First, make sure the device for which you want to install the driver is connected to your computer. It should be recognized as an unknown device or have an error indicator in Device Manager.

2. Open Device Manager:

   • Press the Windows key.
   • Type «Device Manager» into the search bar.
   • Click on «Device Manager» in the search results.

3. Locate the Device:
   In Device Manager, find and expand the category that corresponds to the device you want to install a driver for. The device may appear under «Other devices» with a yellow triangle icon, indicating a problem with the driver.

4. Install the Driver:
   Right-click on the device with the missing driver and select «Update driver.»

5. Choose How to Search for Drivers:

   • Select «Search automatically for updated driver software» if you want Windows to search for the driver online. This option requires an active internet connection.
   • Select «Browse my computer for drivers» if you have already downloaded the driver and have it saved on your computer. Then, click «Next.»

6. Specify the Driver Location (if needed):
   If you selected «Browse my computer for drivers,» browse to the folder containing the downloaded driver files, or select the appropriate folder where the driver is located. Click «Next» to continue.

7. Confirm Driver Installation:
   Windows will analyze the driver package and confirm whether it’s compatible with your device. If it is, you’ll see a message confirming that the driver will be installed. Click «Install» to proceed.

8. Wait for Installation:
   Windows will install the driver. This may take a moment, and you may see a progress bar.

9. Complete the Installation:
   Once the driver installation is complete, you’ll see a message indicating the successful installation. Click «Close» or «Finish» to complete the process.

10. Verify Installation:
    After the installation, the device should no longer have an error indicator in Device Manager. It should be listed under the appropriate category without any warnings.

11. Reboot (if necessary):
    In some cases, Windows may prompt you to restart your computer to finalize the driver installation. If prompted, save your work and restart your computer.

Variant 3: via an INF (Information) file

1. Download the Correct INF File:

   • Visit the manufacturer’s website or a trusted source to download the correct INF file for the driver that matches your hardware device and Windows version. Ensure that you have the latest version of the driver if available.

2. Locate the Downloaded INF File:

   • Once the INF file is downloaded, locate it in your computer’s file system. It is usually in the Downloads folder unless you specified a different location during the download.

3. Right-Click on the INF File:

   • Right-click on the downloaded INF file.

4. Select «Install» from the Context Menu:

   • In the context menu that appears when you right-click the INF file, choose «Install.» This action will initiate the installation process.

5. Driver Installation Process:

   • Windows will begin the installation process for the driver based on the information provided in the INF file. During this process, you may see a series of dialogs or prompts, depending on the driver. These prompts may ask for confirmation to install the driver.

6. Follow On-Screen Prompts:

   • Follow any on-screen prompts or instructions provided during the installation. These may include agreeing to the driver’s terms and conditions, confirming the installation, or selecting installation options.

7. Complete the Installation:

   • Once the installation is complete, you’ll receive a message indicating the successful installation of the driver.

8. Reboot (if necessary):

   • In some cases, Windows may prompt you to restart your computer to finalize the driver installation. If prompted, save your work and restart your computer.

9. Verify Installation:

   • After installation, check Device Manager to ensure the driver is listed under the appropriate category without any warnings or errors. If the device is listed correctly, the driver installation was successful.

Variant 4: using the pnputil command line utility

1. Open a Command Prompt with administrative privileges:

   • Press the Windows key.
   • Type «cmd» or «Command Prompt» into the search bar.
   • Right-click on «Command Prompt» and select «Run as administrator.»

2. Type the following command to list all the installed drivers and their package names:

   This will provide a list of installed drivers along with their published names, which you will need to identify the correct driver package.

3. Locate the INF file for the driver you want to install. INF files are typically located in the driver package folder or on the manufacturer’s website.

4. Install the driver using the pnputil utility. Replace path\to\driver.inf with the actual path to the INF file of the driver you want to install:

   pnputil /add-driver "path\to\driver.inf"

   If you want to specify a package name (use the published name from step 2), you can do so with the /package option:

   pnputil /add-driver "path\to\driver.inf" /package PackageName

   If the driver package contains multiple INF files, you should specify the INF file that corresponds to the specific hardware component you want to update.

5. Windows may prompt you to confirm the installation of the driver. Confirm and proceed with the installation if prompted.

6. After a successful installation, you should see a message indicating that the driver has been added.

7. You may need to restart your computer for the changes to take effect. Use the following command to check the status of the driver installation:

   This command will show a list of installed driver packages.

24 Jan 2022

problem

Install Window-7 in KVM with latest virtio-win drivers,
but seems the virtio-win driver doesn’t work: windows-7 installer can’t recognized the right driver.

resolve

google and try previous versions, and finally got the latest version that worked with Window-7:
virtio-win-0.1.189.iso
#Note: here “189.iso works” just means that windows installer could find available driver from 189.iso,
but virtio-win-gt-x64.msi and virtio-win-guest-tools.exe always doesn’t work, and qemu-ga-x64,qemu-ga-x86_64 works fine

virtio-win-0.1.215.iso, virtio-win-0.1.208.iso, virtio-win-0.1.204.iso, virtio-win-0.1.196.iso and virtio-win-0.1.190.iso all can not work with Win7

ref:

virtio-win-drivers-with-win7

see also:

install Windows 11 on KVM

Screen Shots:

Картинка с сайта: tcler.github.io

Картинка с сайта: tcler.github.io

Картинка с сайта: tcler.github.io

This is directory listing for a user on Fedora People. You can read more about Fedora People here.

This is a community maintained site. Red Hat is not responsible for content. File a ticket if this contains anything that is not permitted.

 Name                                                     Last modified      Size  Description
 Parent Directory                                                              -   
 virtio-win-0.1.229-1.noarch.rpm                          2023-01-09 08:10  226M  
 virtio-win-0.1.229-1.src.rpm                             2023-01-09 08:10  322M  
 virtio-win-0.1.229.iso                                   2023-01-09 08:10  510M  
 virtio-win-gt-x64.msi                                    2023-01-09 08:10  6.1M  
 virtio-win-gt-x86.msi                                    2023-01-09 08:10  5.1M  
 virtio-win-guest-tools.exe                               2023-01-09 08:10   31M  
 virtio-win.iso                                           2023-01-09 08:10  510M  
 virtio-win.noarch.rpm                                    2023-01-09 08:10  226M  
 virtio-win.src.rpm                                       2023-01-09 08:10  322M  

Introduction

VirtIO Drivers are paravirtualized drivers for kvm/Linux (see http://www.linux-kvm.org/page/Virtio). In short, they enable direct (paravirtualized) access to devices and peripherals for virtual machines using them, instead of slower, emulated, ones.
A quite extended explanation about VirtIO drivers can be found here http://www.ibm.com/developerworks/library/l-virtio.

At the moment these kind of devices are supported:

• block (disks drives), see Paravirtualized Block Drivers for Windows
• network (ethernet cards), see Paravirtualized Network Drivers for Windows
• balloon (dynamic memory management), see Dynamic Memory Management

You can maximize performances by using VirtIO drivers. The availability and status of the VirtIO drivers depends on the guest OS and platform.

Windows OS Support

Windows does not have native support for VirtIO devices included.
But, there is excellent external support through opensource drivers, which are available compiled and signed for Windows:

https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/archive-virtio/?C=M;O=D

Note that this repository provides not only the most recent, but also many older versions.
Those older versions can still be useful when a Windows VM shows instability or incompatibility with a newer driver version.

The binary drivers are digitally signed by Red Hat, and will work on 32-bit and 64-bit versions of Windows

Installation

Using the ISO

You can download the latest stable or you can download the most recent build of the ISO.
Normally the drivers are pretty stable, so one should try out the most recent release first.

You can access the ISO in a VM by mounting the ISO with a virtual CD-ROM/DVD drive on that VM.

Wizard Installation

You can use an easy wizard to install all, or a selection, of VirtIO drivers.

1. Open the Windows Explorer and navigate to the CD-ROM drive.
2. Simply execute (double-click on) virtio-win-gt-x64
3. Follow its instructions.
4. (Optional) use the virtio-win-guest-tools wizard to install the QEMU Guest Agent and the SPICE agent for an improved remote-viewer experience.
5. Reboot VM

Manual Installation

1. Open the Windows Explorer and navigate to the CD-ROM drive.

   There you can see that the ISO consists of several directories, each having sub-directories for supported OS version (for example, 2k19, 2k12R2, w7, w8.1, w10, …).

   • Balloon
   • guest-agent
   • NetKVM
   • qxl
   • vioscsi
   • …

2. Navigate to the desired driver directories and respective Windows Version
3. Right-click on the file with type «Setup Information»
4. A context menu opens, select «Install» here.
5. Repeat that process for all desired drivers
6. Reboot VM.

Downloading the Wizard in the VM

You can also just download the most recent virtio-win-gt-x64.msi or virtio-win-gt-x86.msi from inside the VM, if you have already network access.

Then just execute it and follow the installation process.

Troubleshooting

Try an older version of the drivers first, if that does not help ask in one of our support channels:
https://pve.proxmox.com/wiki/Get_support

Further Reading

https://docs.fedoraproject.org/en-US/quick-docs/creating-windows-virtual-machines-using-virtio-drivers/index.html

http://www.linux-kvm.org/page/WindowsGuestDrivers

The source code of those drivers can be found here: https://github.com/virtio-win/kvm-guest-drivers-windows

http://www.linux-kvm.org/page/WindowsGuestDrivers/Download_Drivers

See also

• Paravirtualized Block Drivers for Windows
• Paravirtualized Network Drivers for Windows
• Dynamic Memory Management