Некоторые пользователи, обновившиеся до Windows 10 последней версии, могут обнаружить, что при подключении к Wi-Fi сети, защищенной паролем, появляется уведомление о том, что соединение не защищено с информацией «В этой сети Wi-Fi применяется устаревший стандарт безопасности. Мы рекомендуем подключиться к другой сети».
В этой короткой инструкции о том, почему вы видите такое сообщение в Windows 10, что означает устаревший стандарт безопасности и как исправить проблему с подключением Wi-Fi.
Почему соединение Wi-Fi не защищено и что значит устаревший стандарт безопасности
Windows 10 показывает уведомление о том что подключение не защищено в двух случаях. Первый — когда для Wi-Fi сети не установлен пароль и эта причина вполне понятна. Второй возможный сценарий — использование устаревших типов шифрования для Wi-Fi сети и именно этот вариант может вызвать вопросы.
Если в качестве типа безопасности для вашей беспроводной сети выбран WEP или в качестве типа шифрования используется TKIP, вы получите уведомление, о котором идет речь в этой инструкции. Причина простая: по сегодняшним меркам эти стандарты действительно являются небезопасными и их не рекомендуется использовать (а на некоторых современных роутерах их уже нельзя выбрать) в связи с относительной простотой взлома.
Что делать в этой ситуации? Шаги простые, особенно если вы ранее сами настраивали свой роутер и не зависят от марки и модели беспроводного маршрутизатора (интерфейс может отличаться, но логика везде одна и та же):
- Зайдите в веб-интерфейс настроек роутера и перейдите на страницу настроек беспроводной сети (или параметров безопасности Wi-Fi).
- В качестве типа безопасности выберите один из современных вариантов, лучше всего —WPA3/WPA2 (при наличии) или WPA2-PSK (если будет предлагаться выбрать тип шифрования, то AES).
- Задайте пароль для Wi-Fi (скорее всего его придется установить заново).
- Сохраните сделанные настройки.
- Через некоторое время (в этот момент может показаться, что страница настроек роутера «зависла») заново подключитесь к беспроводной сети уже с новым паролем (предварительно может потребоваться «забыть» Wi-Fi сеть в Windows 10).
После этого никакие уведомления о том, что сеть не защищена и используется устаревший стандарт безопасности появляться не будут.
Если вы не знаете, как все это проделать на вашем роутере, посмотрите инструкции по настройке Wi-Fi роутера — все они одним из этапов содержат информацию о настройке Wi-Fi сети и пароля на беспроводную сеть: а это именно то расположение, где и задаются интересующие нас настройки.
В редких случаях, но очень старых беспроводных маршрутизаторах вы можете столкнуться с тем, что современные стандарты безопасности не поддерживаются. В этом случае наилучшим вариантом будет заменить роутер, они не слишком дорогие.
Applies ToWindows 10 Windows 11
Если отображается уведомление о том, что Wi-Fi сеть не защищена, это означает, что вы подключены к сети с использованием устаревших стандартов безопасности, таких как WEP или TKIP. Эти стандарты имеют известные уязвимости.
Ниже приведены шаги по улучшению безопасности Wi-Fi.
-
Переключение сетей: Если вы доверяете другой Wi-Fi сети, отключитесь от текущей сети и подключитесь к другой сети. Дополнительные сведения см. в статье Подключение к Wi-Fi сети в Windows.
-
Обновление параметров безопасности: Для домашних сетей рассмотрите возможность обновления параметров безопасности маршрутизатора до более безопасного стандарта, например WPA3. Это можно сделать, перейдя к параметрам маршрутизатора через его программное обеспечение. Дополнительные сведения см. в разделе Настройка беспроводной сети.
-
Обновите маршрутизатор:Если маршрутизатор устарел, рассмотрите возможность обновления до новой модели, которая поддерживает последние стандарты безопасности.
Примечание: Хотя старые Wi-Fi стандарты безопасности по-прежнему разрешены, в будущем они будут постепенно прекращены. Эту проблему лучше решить, используя приведенные выше рекомендации.
Нужна дополнительная помощь?
Нужны дополнительные параметры?
Изучите преимущества подписки, просмотрите учебные курсы, узнайте, как защитить свое устройство и т. д.
14081
При подключении к Wi-Fi сети в Windows 11 и Windows 10 можно увидеть сообщение «В этой сети Wi-Fi применяется устаревший стандарт безопасности…». Этот стандарт безопасности может не обеспечивать защиту, или уже не используется. Так же там может быть рекомендация подключиться к другой сети. Что делать в этой ситуации и как исправить эту ошибку я подробно расскажу в этой статье.
Чтобы было понятно о чем идет речь и вы были уверены, что у вас такая же проблема, прикрепляю скриншоты. Так у меня Windows 11 ругается на Wi-Fi сеть с устаревшим стандартом безопасности. При чем предупреждение отображается еще до подключения к сети.
После подключения появится уведомление, что Wi-Fi сеть не защищена. В Windows 10 уведомление выглядит примерно так же.
При этом можно продолжать использовать подключение к интернету через эту сеть. Все будет работать.
Почему Windows пишет, что Wi-Fi сеть использует устаревший стандарт безопасности?
Многие модели роутеров и точек доступа позволяют в настройках Wi-Fi сети установить устаревший стандарт безопасности беспроводной сети и шифрования. Обычно это стандарт безопасности WEP и шифрование TKIP. Так вот, если в вашем роутере установлены такие настройки безопасности беспроводной сети, то Windows 11 и Windows 10 это не понравится и вы увидите данное уведомление. Более подробно о настройках безопасности Wi-Fi сетей я уже писал: тип безопасности и шифрования беспроводной сети. Какой выбрать?
Подключаться к Wi-Fi сети с устаревшим стандартом безопасности действительно не очень безопасно. Такие сети могут быть легко взломаны. А информация, которая передается через них, может быть перехвачена злоумышленниками. При чем это касается как домашних Wi-Fi сетей, так и общественных.
Как это исправить?
Со стороны самой операционной системы Windows это никак не исправить. Но есть два других решения:
- Если вы видите это сообщение при подключении к общественной сети, чужой, к настройкам которой у вас нет доступа, тогда лучше всего просто не подключаться к этой сети. Найдите другую сеть, или раздайте интернет с телефона.
- Если сеть ваша, у вас есть доступ к настройкам этого роутера, то я настоятельно рекомендую изменить настройки роутера и установить новый и безопасный стандарт безопасности. Это нужно не только для Windows 11 или Windows 10, но и для другие устройств, которые будут подключаться к этой сети.
Сменить настройки роутера не сложно. Необходимо подключиться к роутеру с любого устройства и через любой браузер открыть его веб-интерфейс. Адрес для входа в настройки практически всегда указан снизу роутера. Обычно это 192.168.1.1 или 192.168.0.1 (по ссылкам подробные инструкции).
В веб-инетрфейсе роутера необходимо найти раздел с настройками Wi-Fi сети, или с настройками безопасности (иногда они вынесены в отдельный раздел) и там установит защиту WPA2-PSK и выбрать шифрование AES. Если нет только WPA2, тогда WPA/WPA2-PSK. А еще лучше установить WPA3/WPA2, если в вашем роутере есть такой пункт. Вот так это выглядит на роутерах TP-Link с новым веб-интерфейсом:
Возможно так же понадобится указать новый пароль. Подробнее в статье как поменять, или поставить пароль Wi-Fi на TP-Link. У нас так же есть отдельные инструкции по установке пароля Wi-Fi сети на роутерах ASUS, D-Link, Tenda, Netis, Keenetic.
После сохранения настроек и перезагрузи роутера (перезагружать нужно не все модели) подключитесь заново к своей сети. Все должно быть хорошо, сообщения об устаревшем стандарте безопасности Wi-Fi сети вы не увидите. Иногда нужно забыть Wi-Fi сеть и подключиться к ней заново, ввести пароль, так как может быть ошибка параметры сети, сохраненные на этом компьютере, не соответствуют требованиям этой сети.
Issue: Hello. When I try to connect to my Wi-Fi on my Windows PC, I receive the “This WiFi uses an older security standard” error message. What should I do?
Solved Answer
When attempting to connect to a WiFi network, the “This WiFi uses an older security standard” error in Windows indicates that the PC is using outdated authentication protocols, specifically WEP (Wired Equivalent Privacy)[1] or TKIP (Temporal Key Integrity Protocol). The full error message displayed to users is as follows:
This Wi-Fi network uses an older security standard that’s being phased out. We recommend connecting to a different network.
This problem may have a variety of consequences for users. For starters, it introduces security flaws because both WEP and TKIP are known to have serious weaknesses. Users are more vulnerable to unauthorized access, data breaches, and privacy compromises when they rely on outdated authentication protocols.[2] Users are exposed to potential security threats if they continue to connect to networks with outdated security standards.
Second, the PC’s compatibility with modern Wi-Fi networks may be limited. As newer networks prioritize stronger security measures, WEP and TKIP authentication protocols may no longer be supported. As a result of the incompatibility between their PC’s authentication capabilities and the network’s security requirements, users may encounter difficulties connecting to such networks or experience slow and unreliable connections.
There are a number of potential solutions to this problem. To begin, users can follow the advice in the error message and connect to a different network that adheres to modern security standards. Users can ensure a safer and more secure connection by selecting networks with stronger encryption protocols. Another possible solution is to update the Wi-Fi adapter drivers on the PC. Users can address compatibility issues and potentially gain support for newer security protocols by installing the most recent drivers provided by the manufacturer.
In some cases, upgrading the WiFi hardware may be required. If the current WiFi adapter or router does not support the most recent encryption protocols, purchasing a newer model with enhanced security features becomes a viable option. Upgrading the hardware ensures compatibility with networks that place a higher priority on security.
This guide will walk you through 2 steps that should help you resolve the “This WiFi uses an older security standard” error. Step-by-step instructions are provided below.
Solution 1. Change WLAN Security to WPA2
- Press the Windows key + R keyboard shortcut.
- In the Run dialog box, type cmd and click OK.
- The Command Prompt window will open. Type ipconfig and press Enter.
- Note down the Default Gateway number.
- Open a web browser and paste the Default Gateway number in the URL bar by pressing Ctrl + V.
- Press Enter to access the router’s admin page.
- Enter the required login details to log in to the router admin page.
- Check the router’s instruction manual or the router’s rating plate for the login details.
- Look for a tab that includes Wi-Fi security settings on the router admin page.
- Keep in mind that router admin pages may vary in their user interface.
- Select a WPA2 or AES option from the Security Mode drop-down menu.
- Choose a Save or Apply option to apply the selected security mode.
Solution 2. Buy a new Router
Fix it now!
Fix it now!
To repair damaged system, you will have a 24hr Free Trial and the ability to purchase the licensed version of the Fortect Mac Washing Machine X9.
If you are using old WiFi adapters, you may not be able to use AES Encryption because it is not supported on those devices. In such cases, you have two choices: continue to connect to WiFi networks that use an older security standard, or consider purchasing a new WiFi adapter that supports the most recent encryption protocols.
When you connect to a Not Secure WiFi network, your connected devices can still access the internet. However, when you go to the WiFi settings page, you will notice a not-secured symbol next to the name of the WiFi network. This symbol indicates that the network does not have adequate encryption to protect your data.
While it is possible to continue using your old routers, we strongly recommend purchasing a new WiFi adapter. This recommendation is made because older routers frequently do not provide adequate data encryption, leaving your personal information vulnerable to potential security risks.
Furthermore, Microsoft has stated that it will no longer support security features such as WEP and TKIP. As a result, upgrading to newer and more secure protocols is highly recommended to ensure the security of your wireless network.
Repair your Errors automatically
ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow:
do it now!
Download Fix
Happiness
Guarantee
do it now!
Download Fix
Happiness
Guarantee
Compatible with Microsoft Windows
Compatible with OS X
Still having problems?
If you failed to fix your error using FortectMac Washing Machine X9, reach our support team for help. Please, let us know all details that you think we should know about your problem.
Fortect will diagnose your damaged PC. It will scan all System Files that have been damaged by security threats. Mac Washing Machine X9 will diagnose your damaged computer. It will scan all System Files and Registry Keys that have been damaged by security threats. To repair damaged system, you will have a 24hr Free Trial and the ability to purchase the licensed version of the Fortect malware removal tool. To repair damaged system, you have to purchase the licensed version of Mac Washing Machine X9 malware removal tool.
Prevent websites, ISP, and other parties from tracking you
To stay completely anonymous and prevent the ISP and the government from spying on you, you should employ Private Internet Access VPN. It will allow you to connect to the internet while being completely anonymous by encrypting all information, prevent trackers, ads, as well as malicious content. Most importantly, you will stop the illegal surveillance activities that NSA and other governmental institutions are performing behind your back.
Recover your lost files quickly
Unforeseen circumstances can happen at any time while using the computer: it can turn off due to a power cut, a Blue Screen of Death (BSoD) can occur, or random Windows updates can the machine when you went away for a few minutes. As a result, your schoolwork, important documents, and other data might be lost. To recover lost files, you can use Data Recovery Pro – it searches through copies of files that are still available on your hard drive and retrieves them quickly.
Readers help support Windows Report. We may get a commission if you buy through our links.
Read our disclosure page to find out how can you help Windows Report sustain the editorial team. Read more
Some users who have updated Windows 10 with the May 2019 Update might have spotted a curious Wi-Fi notification at the bottom right of the desktop.
That notification states: “This Wi-Fi network uses an older security standard that’s being phased out. We recommend connecting to a different network.”
That notification tells some users that their Wi-Fi connections are utilizing antiquated encryption methods. The message pops up for users with Wi-Fi networks that are still utilizing the WEP and TKIP authentication protocols. Consequently, the notification informs some users that their net connections aren’t entirely secure.
How can I fix the WiFi uses an older security standard pop up?
1. Select a Newer Security Mode via the Router’s Admin Page
Users who spot an “isn’t secure” notification should select a newer encryption method, such as AES or WPA2, on their routers’ admin pages.
- To open a router’s admin page, users will need to get the IP address for it by pressing the Windows key + R keyboard shortcut.
- Enter ‘cmd’ in Run’s Open box, and click the OK option.
- Then input ‘ipconfig’ in the Command Prompt window that opens, and press the Enter key.
- Then note down the Default Gateway number. Alternatively, users can copy it to the clipboard by selecting the number and pressing the Ctrl + C hotkey.
- Paste the Default Gateway number in a browser’s URL bar by pressing the Ctrl + V hotkey, and press the Enter key. That should open a router admin page like the one shown directly below.
- Next, enter the required login details to log in to the router admin page. The router’s instruction manual should include the login details for that page, and the router’s rating plate might also include those details.
- As router admin pages don’t have the same UI, specific instructions for selecting a new security mode can’t be provided. Look for a tab that includes Wi-Fi security settings on it.
- Then select a WPA2 or AES option, which a Security Mode drop-down menu might include.
- Select a Save or Apply option.
2. Get a New Router
Users who can’t select WPA2 or AES, or other more update security mode options, within their routers’ admin pages will need to get new routers to fix their unsecure Wi-Fi. There’s little point sticking with outdated routers that don’t support reasonably update encryption methods. So, get a replacement router that does support the latest encryption methods.
Microsoft has confirmed that it intends to stop supporting the WEP and TKIP protocols, which is why Windows 10 now displays an “isn’t secure” notification to some users.
Thus, users need to either change their current routers’ encryption settings or change their routers to ensure they can still browse the web when the big M terminates support for WEP and TKIP.
We hope you managed to get rid of the this WiFi network uses an older security standard pop up on your Windows device and fixed everything. Let us know how it went in the comments section below.
Matthew Adams
Windows Hardware Expert
Matthew is a freelancer who has produced a variety of articles on various topics related to technology. His main focus is the Windows OS and all the things surrounding it.
He is passionate about the tech world, always staying up-to-date with the latest and greatest. With an analytical view, he likes problem-solving, focusing on errors and their causes.
In his free time, he likes to read and write about history and tries to always develop new skills.