In this PostgreSQL tutorial, we will learn how to restart PostgreSQL services or servers in various platforms like Windows, Mac, and Linux. Also, we will cover these topics:
- How to Restart Postgres Server
- How to Restart PostgreSQL Service in Linux
- How to Restart Postgres Sevice in Mac
- How to Restart PostgreSQL Service
- How to Restart PostgreSQL in Windows
- How to Restart Postgres in Ubuntu
- How to Restart Postgres Service in Ubuntu
- How to Restart Postgres Server in Ubuntu
- How to Restart Postgres Service in Centos
How to Restart Postgres Service
In this section, we will see why do we need to restart the PostgreSQL services on various platforms like Windows, Mac, and Linux.
- Software is a mysterious thing that may break or stop working while it was running fine a few minutes back. There could be ‘n’ number of reasons why the bug appeared in the program.
- Whenever this happens the first thing we do is restart our system & most of the time it works.
- But when a developer sees an error, he tries to understand it. So instead of rebooting the system, he restarts the services of that program.
- If the problem is not solved after restarting services that means some other software or driver or any malware is creating a problem.
- To restart PostgreSQL services, we use systemctl in Linux, services in Mac and windows.
- Moving ahead we will see all of these in detail.
Read: How to create a table in PostgreSQL [Terminal + pgAdmin]
How to Restart Postgres Service in Linux
In this section, we will learn how to Restart Postgres Service in Red Hat Linux. Red Hat is the Linux RPM package.
- Linux Debian package users can see How to Restart Postgres in Ubuntu section below.
- Linux provides a power command
systemctlusing which we can start, stop, restart and view the status of any service on the Linux machine. - In the below command we have used status to know the current state of the PostgreSQL service.
sudo systemctl status postgresql-13.service- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here restart is the keyword behind the operation.
sudo systemctl restart postgresql-13.service- In the below image, the PostgreSQL service is restarted and now the time running says 13s ago which means machine is just now started.
How to Restart Postgres Sevice in Mac
In this tutorial, we will learn how to restart PostgreSQL service in Mac operating system. We will be using brew to restart the PostgreSQL services.
- Open terminal and type the following command.
sudo brew services restart postgresql- The PostgreSQL services will be restarted in Mac operating system.
How to Restart Postgres in Windows
In this section, we will learn how to restart Postgres in Windows. This tutorial will work on Windows 10, Windows 8, 8.1, Windows 7.
- Press Windows key + R, ‘RUN’ box will appear.
- Type services.msc in the Run box and hit enter.
- Services window will open, search for postgresql-13. Here 13 is the version of PostgreSQL installed in the window machine.
- Right-click on the postgresql-13 and click on the restart option.
- The services will restart now.
- This is how we can restart PostgreSQL services in windows machines.
Read: PostgreSQL installation on Linux step by step
How to Restart Postgres in Ubuntu
In this section, we will learn how to restart PostgreSQL in Ubuntu operating system. Ubuntu is a Linux Debian package.
- If you are using Red hat, Centos or Fedora then follow the instructions in How to Restart Postgres Service in Linux section above.
- Linux provides a power command
systemctlusing which we can start, stop, restart and view the status of any service on the Linux machine. - In the below command we have used status to know the current state of the PostgreSQL service.
sudo systemctl status postgresql.service- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here, restart is the keyword behind the operation. It stops the service and then start it again.
sudo systemctl restart postgresql.service- In the below image, we have restarted the PostgreSQL service and now the total running time of the service has been changed from 23m to 10s. This means the service has been started just now.
How to Restart Postgres Server
In this section, we will learn how to restart Postgres Server. The server could be local or cloud-based.
- Ubuntu server, Red Hat server, etc are examples of local servers that we can be created to manage work on a small scale.
- AWS, Azure, Digital Ocean, etc comes under cloud-based servers and they are dedicated to large work.
- In this section, we have used the Red Hat server, which is a local server created on our own network. Please note that this machine is destroyed after publishing this tutorial.
- Linux provides a powerful command systemctl using which we can start, stop, restart and view the current status of the services running on the machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
sudo systemctl status postgresql-13.service- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here, restart is the keyword behind the operation. It stops the service and then start it again.
sudo systemctl restart postgresql-13.service- In the below image, we have restarted the PostgreSQL service and now the total running time of the service has been changed from 17m to 9s. This means the service has been started just now.
How to Restart Postgres Service in Ubuntu
In this section, we will learn how to restart PostgreSQL in Ubuntu operating system. Ubuntu is a Linux Debian package.
- If you are using Red hat, Centos or Fedora then follow the instructions in How to Restart Postgres Service in Linux section above.
- Linux provides a power command
systemctlusing which we can start, stop, restart and view the status of any service on the Linux machine. - In the below command we have used status to know the current state of the PostgreSQL service.
sudo systemctl status postgresql.service- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here, restart is the keyword behind the operation. It stops the service and then starts it again.
sudo systemctl restart postgresql.service- In the below image, we have restarted the PostgreSQL service and now the total running time of the service has been changed from 23m to 10s. This means the service has been started just now.
How to Restart Postgres Server in Ubuntu
In this section, we will learn how to restart PostgreSQL server in Ubuntu. There are two types of services available under Ubuntu postgresql@13-main.service and postgresql.service.
- If postgresql.service controls all the activities related to postgreSQL. If this service is stopped then postgresql@13-main.service also stops.
- postgresql@13-main.service is the PostgreSQL server if this service is stopped then the user won’t be able to access the PostgreSQL.
- In this section, we will learn how to restart postgresql@13-main.service.
- Linux provides a powerful command systemctl using which we can start, stop, restart or view the status of the services running on the machine.
- Below is the command to restart the Postgres server in ubuntu.
sudo systemctl retart postgresql@13-main.service- In the below output, we have stopped the main services and then we have tried to access the PostgreSQL.
- ‘could not connect to server’, an error appeared on the screen.
- To connect back we have run the restart command now we are able to access the Postgres.
How to Restart Postgres Service in Centos
In this section, we will learn how to Restart Postgres Service in Centos Linux. Centos is the Linux RPM package.
- Linux Debian package users can see How to Restart Postgres in Ubuntu section above.
- Linux provides a power command
systemctlusing which we can start, stop, restart and view the status of any service on the Linux machine. - In the below command we have used status to know the current state of the PostgreSQL service.
sudo systemctl status postgresql-13.service- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here restart is the keyword behind the operation.
sudo systemctl restart postgresql-13.service- In the below image, the PostgreSQL service is restarted and now the time running says 13s ago which means machine is just now started.
You may like the following articles:
- How to Uninstall PostgreSQL (Linux, Mac, and Windows)
- How to connect to PostgreSQL database
In this tutorial, we have learned how to how to restart PostgreSQL service in Linux. Also, we have covered these topics.
- How to Restart Postgres Service in Linux
- How to Restart Postgres in Mac
- How to Restart Postgres Sevice in Mac
- How to Restart Postgres in Windows
- How to Restart Postgres in Ubuntu
- How to Restart Postgres Server
- How to Restart Postgres Service in Ubuntu
- How to Restart Postgres Server in Ubuntu
- How to Restart Postgres Service in Centos
I am Bijay having more than 15 years of experience in the Software Industry. During this time, I have worked on MariaDB and used it in a lot of projects. Most of our readers are from the United States, Canada, United Kingdom, Australia, New Zealand, etc.
Want to learn MariaDB? Check out all the articles and tutorials that I wrote on MariaDB. Also, I am a Microsoft MVP.
How to Restart PostgreSQL (Linux, Windows, Mac)
In this PostgreSQL tutorial, we will learn how to restart PostgreSQL services or servers in various platforms like Windows, Mac, and Linux. Also, we will cover these topics:
- How to Restart Postgres Server
- How to Restart PostgreSQL Service in Linux
- How to Restart Postgres Sevice in Mac
- How to Restart PostgreSQL Service
- How to Restart PostgreSQL in Windows
- How to Restart Postgres in Ubuntu
- How to Restart Postgres Service in Ubuntu
- How to Restart Postgres Server in Ubuntu
- How to Restart Postgres Service in Centos
Table of Contents
How to Restart Postgres Service
In this section, we will see why do we need to restart the PostgreSQL services on various platforms like Windows, Mac, and Linux.
- Software is a mysterious thing that may break or stop working while it was running fine a few minutes back. There could be ‘n’ number of reasons why the bug appeared in the program.
- Whenever this happens the first thing we do is restart our system & most of the time it works.
- But when a developer sees an error, he tries to understand it. So instead of rebooting the system, he restarts the services of that program.
- If the problem is not solved after restarting services that means some other software or driver or any malware is creating a problem.
- To restart PostgreSQL services, we use systemctl in Linux, services in Mac and windows.
- Moving ahead we will see all of these in detail.
How to Restart Postgres Service in Linux
In this section, we will learn how to Restart Postgres Service in Red Hat Linux. Red Hat is the Linux RPM package.
- Linux Debian package users can see How to Restart Postgres in Ubuntu section below.
- Linux provides a power command systemctl using which we can start, stop, restart and view the status of any service on the Linux machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here restart is the keyword behind the operation.
- In the below image, the PostgreSQL service is restarted and now the time running says 13s ago which means machine is just now started.
How to Restart Postgres Sevice in Mac
In this tutorial, we will learn how to restart PostgreSQL service in Mac operating system. We will be using brew to restart the PostgreSQL services.
- Open terminal and type the following command.
- The PostgreSQL services will be restarted in Mac operating system.
How to Restart Postgres in Windows
In this section, we will learn how to restart Postgres in Windows. This tutorial will work on Windows 10, Windows 8, 8.1, Windows 7.
- Press Windows key + R, ‘RUN’ box will appear.
- Type services.msc in the Run box and hit enter.
- Services window will open, search for postgresql-13. Here 13 is the version of PostgreSQL installed in the window machine.
- Right-click on the postgresql-13 and click on the restart option.
- The services will restart now.
- This is how we can restart PostgreSQL services in windows machines.
How to Restart Postgres in Ubuntu
In this section, we will learn how to restart PostgreSQL in Ubuntu operating system. Ubuntu is a Linux Debian package.
- If you are using Red hat, Centos or Fedora then follow the instructions in How to Restart Postgres Service in Linux section above.
- Linux provides a power command systemctl using which we can start, stop, restart and view the status of any service on the Linux machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here, restart is the keyword behind the operation. It stops the service and then start it again.
- In the below image, we have restarted the PostgreSQL service and now the total running time of the service has been changed from 23m to 10s. This means the service has been started just now.
How to Restart Postgres Server
In this section, we will learn how to restart Postgres Server. The server could be local or cloud-based.
- Ubuntu server, Red Hat server, etc are examples of local servers that we can be created to manage work on a small scale.
- AWS, Azure, Digital Ocean, etc comes under cloud-based servers and they are dedicated to large work.
- In this section, we have used the Red Hat server, which is a local server created on our own network. Please note that this machine is destroyed after publishing this tutorial.
- Linux provides a powerful command systemctl using which we can start, stop, restart and view the current status of the services running on the machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here, restart is the keyword behind the operation. It stops the service and then start it again.
- In the below image, we have restarted the PostgreSQL service and now the total running time of the service has been changed from 17m to 9s. This means the service has been started just now.
How to Restart Postgres Service in Ubuntu
In this section, we will learn how to restart PostgreSQL in Ubuntu operating system. Ubuntu is a Linux Debian package.
- If you are using Red hat, Centos or Fedora then follow the instructions in How to Restart Postgres Service in Linux section above.
- Linux provides a power command systemctl using which we can start, stop, restart and view the status of any service on the Linux machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
Restart Postgres Service in Ubuntu
- Type the below command to restart the PostgreSQL services. Here, restart is the keyword behind the operation. It stops the service and then starts it again.
- In the below image, we have restarted the PostgreSQL service and now the total running time of the service has been changed from 23m to 10s. This means the service has been started just now.
Restart Postgres Service in Ubuntu
How to Restart Postgres Server in Ubuntu
In this section, we will learn how to restart PostgreSQL server in Ubuntu. There are two types of services available under Ubuntu postgresql@13-main.service and postgresql.service.
- If postgresql.service controls all the activities related to postgreSQL. If this service is stopped then postgresql@13-main.service also stops.
- postgresql@13-main.service is the PostgreSQL server if this service is stopped then the user won’t be able to access the PostgreSQL.
- In this section, we will learn how to restart postgresql@13-main.service.
- Linux provides a powerful command systemctl using which we can start, stop, restart or view the status of the services running on the machine.
- Below is the command to restart the Postgres server in ubuntu.
- In the below output, we have stopped the main services and then we have tried to access the PostgreSQL.
- ‘could not connect to server’, an error appeared on the screen.
- To connect back we have run the restart command now we are able to access the Postgres.
How to Restart Postgres Service in Centos
In this section, we will learn how to Restart Postgres Service in Centos Linux. Centos is the Linux RPM package.
- Linux Debian package users can see How to Restart Postgres in Ubuntu section above.
- Linux provides a power command systemctl using which we can start, stop, restart and view the status of any service on the Linux machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here restart is the keyword behind the operation.
- In the below image, the PostgreSQL service is restarted and now the time running says 13s ago which means machine is just now started.
You may like the following articles:
In this tutorial, we have learned how to how to restart PostgreSQL service in Linux. Also, we have covered these topics.
- How to Restart Postgres Service in Linux
- How to Restart Postgres in Mac
- How to Restart Postgres Sevice in Mac
- How to Restart Postgres in Windows
- How to Restart Postgres in Ubuntu
- How to Restart Postgres Server
- How to Restart Postgres Service in Ubuntu
- How to Restart Postgres Server in Ubuntu
- How to Restart Postgres Service in Centos
I am Bijay having more than 15 years of experience in the Software Industry. During this time, I have worked on MariaDB and used it in a lot of projects. Most of our readers are from the United States, Canada, United Kingdom, Australia, New Zealand, etc.
Want to learn MariaDB? Check out all the articles and tutorials that I wrote on MariaDB. Also, I am a Microsoft MVP.
Источник
How to Restart PostgreSQL (Linux, Windows, Mac)
In this PostgreSQL tutorial, we will learn how to restart PostgreSQL services or servers in various platforms like Windows, Mac, and Linux. Also, we will cover these topics:
- How to Restart Postgres Server
- How to Restart PostgreSQL Service in Linux
- How to Restart Postgres Sevice in Mac
- How to Restart PostgreSQL Service
- How to Restart PostgreSQL in Windows
- How to Restart Postgres in Ubuntu
- How to Restart Postgres Service in Ubuntu
- How to Restart Postgres Server in Ubuntu
- How to Restart Postgres Service in Centos
Table of Contents
How to Restart Postgres Service
In this section, we will see why do we need to restart the PostgreSQL services on various platforms like Windows, Mac, and Linux.
- Software is a mysterious thing that may break or stop working while it was running fine a few minutes back. There could be ‘n’ number of reasons why the bug appeared in the program.
- Whenever this happens the first thing we do is restart our system & most of the time it works.
- But when a developer sees an error, he tries to understand it. So instead of rebooting the system, he restarts the services of that program.
- If the problem is not solved after restarting services that means some other software or driver or any malware is creating a problem.
- To restart PostgreSQL services, we use systemctl in Linux, services in Mac and windows.
- Moving ahead we will see all of these in detail.
How to Restart Postgres Service in Linux
In this section, we will learn how to Restart Postgres Service in Red Hat Linux. Red Hat is the Linux RPM package.
- Linux Debian package users can see How to Restart Postgres in Ubuntu section below.
- Linux provides a power command systemctl using which we can start, stop, restart and view the status of any service on the Linux machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here restart is the keyword behind the operation.
- In the below image, the PostgreSQL service is restarted and now the time running says 13s ago which means machine is just now started.
How to Restart Postgres Sevice in Mac
In this tutorial, we will learn how to restart PostgreSQL service in Mac operating system. We will be using brew to restart the PostgreSQL services.
- Open terminal and type the following command.
- The PostgreSQL services will be restarted in Mac operating system.
How to Restart Postgres in Windows
In this section, we will learn how to restart Postgres in Windows. This tutorial will work on Windows 10, Windows 8, 8.1, Windows 7.
- Press Windows key + R, ‘RUN’ box will appear.
- Type services.msc in the Run box and hit enter.
- Services window will open, search for postgresql-13. Here 13 is the version of PostgreSQL installed in the window machine.
- Right-click on the postgresql-13 and click on the restart option.
- The services will restart now.
- This is how we can restart PostgreSQL services in windows machines.
How to Restart Postgres in Ubuntu
In this section, we will learn how to restart PostgreSQL in Ubuntu operating system. Ubuntu is a Linux Debian package.
- If you are using Red hat, Centos or Fedora then follow the instructions in How to Restart Postgres Service in Linux section above.
- Linux provides a power command systemctl using which we can start, stop, restart and view the status of any service on the Linux machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here, restart is the keyword behind the operation. It stops the service and then start it again.
- In the below image, we have restarted the PostgreSQL service and now the total running time of the service has been changed from 23m to 10s. This means the service has been started just now.
How to Restart Postgres Server
In this section, we will learn how to restart Postgres Server. The server could be local or cloud-based.
- Ubuntu server, Red Hat server, etc are examples of local servers that we can be created to manage work on a small scale.
- AWS, Azure, Digital Ocean, etc comes under cloud-based servers and they are dedicated to large work.
- In this section, we have used the Red Hat server, which is a local server created on our own network. Please note that this machine is destroyed after publishing this tutorial.
- Linux provides a powerful command systemctl using which we can start, stop, restart and view the current status of the services running on the machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here, restart is the keyword behind the operation. It stops the service and then start it again.
- In the below image, we have restarted the PostgreSQL service and now the total running time of the service has been changed from 17m to 9s. This means the service has been started just now.
How to Restart Postgres Service in Ubuntu
In this section, we will learn how to restart PostgreSQL in Ubuntu operating system. Ubuntu is a Linux Debian package.
- If you are using Red hat, Centos or Fedora then follow the instructions in How to Restart Postgres Service in Linux section above.
- Linux provides a power command systemctl using which we can start, stop, restart and view the status of any service on the Linux machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
Restart Postgres Service in Ubuntu
- Type the below command to restart the PostgreSQL services. Here, restart is the keyword behind the operation. It stops the service and then starts it again.
- In the below image, we have restarted the PostgreSQL service and now the total running time of the service has been changed from 23m to 10s. This means the service has been started just now.
Restart Postgres Service in Ubuntu
How to Restart Postgres Server in Ubuntu
In this section, we will learn how to restart PostgreSQL server in Ubuntu. There are two types of services available under Ubuntu postgresql@13-main.service and postgresql.service.
- If postgresql.service controls all the activities related to postgreSQL. If this service is stopped then postgresql@13-main.service also stops.
- postgresql@13-main.service is the PostgreSQL server if this service is stopped then the user won’t be able to access the PostgreSQL.
- In this section, we will learn how to restart postgresql@13-main.service.
- Linux provides a powerful command systemctl using which we can start, stop, restart or view the status of the services running on the machine.
- Below is the command to restart the Postgres server in ubuntu.
- In the below output, we have stopped the main services and then we have tried to access the PostgreSQL.
- ‘could not connect to server’, an error appeared on the screen.
- To connect back we have run the restart command now we are able to access the Postgres.
How to Restart Postgres Service in Centos
In this section, we will learn how to Restart Postgres Service in Centos Linux. Centos is the Linux RPM package.
- Linux Debian package users can see How to Restart Postgres in Ubuntu section above.
- Linux provides a power command systemctl using which we can start, stop, restart and view the status of any service on the Linux machine.
- In the below command we have used status to know the current state of the PostgreSQL service.
- In the below image, the output of the above command shows the status of the PostgreSQL service.
- The service is in an active (running) state. Also, please make a note of the time so that you can compare it with an upcoming image.
- Type the below command to restart the PostgreSQL services. Here restart is the keyword behind the operation.
- In the below image, the PostgreSQL service is restarted and now the time running says 13s ago which means machine is just now started.
You may like the following articles:
In this tutorial, we have learned how to how to restart PostgreSQL service in Linux. Also, we have covered these topics.
- How to Restart Postgres Service in Linux
- How to Restart Postgres in Mac
- How to Restart Postgres Sevice in Mac
- How to Restart Postgres in Windows
- How to Restart Postgres in Ubuntu
- How to Restart Postgres Server
- How to Restart Postgres Service in Ubuntu
- How to Restart Postgres Server in Ubuntu
- How to Restart Postgres Service in Centos
I am Bijay having more than 15 years of experience in the Software Industry. During this time, I have worked on MariaDB and used it in a lot of projects. Most of our readers are from the United States, Canada, United Kingdom, Australia, New Zealand, etc.
Want to learn MariaDB? Check out all the articles and tutorials that I wrote on MariaDB. Also, I am a Microsoft MVP.
Источник
By Cristian G. Guasch • Updated: 09/22/23 • 9 min read
Sometimes, there’s a need to give your PostgreSQL server a fresh start. Whether you’re troubleshooting, carrying out routine maintenance or implementing new settings, knowing how to restart PostgreSQL effectively is crucial. It’s one of those fundamental skills that’ll serve you well as you navigate the world of database administration.
Get Exclusive SQL Tips Right In Your Email Inbox
Plus SQL Cheat Sheets and more bonuses, all for FREE!
In this guide, I’m going to walk you through the process step-by-step. You’ll learn not just how to perform the task at hand but also understand what happens behind the scenes when you restart your PostgreSQL server. That way, you can tackle any issues that might arise with confidence.
Remember: restarting your PostgreSQL server should be done with care. Though it’s a relatively straightforward procedure, improper handling can lead to data loss or corruption – we certainly don’t want that! So stick with me and let’s explore the safe and efficient ways to get your PostgreSQL back on track.
Understanding the Need to Restart PostgreSQL
Sometimes, it’s necessary to hit that restart button. In the realm of databases like PostgreSQL, this is no different. But what exactly prompts this need? Let’s delve into that a bit more.
When I’m working with PostgreSQL, one common reason why I might need to restart it is due to configuration changes. You see, some changes in the postgresql.conf file don’t take effect until you do a server restart. For instance:
# Changing shared_buffers value
shared_buffers = 512MB # original value
shared_buffers = 1024MB # new value
After changing shared_buffers value from 512MB to 1024MB in postgresql.conf file, the database needs to be restarted for this modification to take place.
Another scenario where I’ve found restarting useful is when there are active connections bogging down my system resources and affecting performance. A quick restart can help clear these out and get things running smoothly again.
Now here’s something crucial: Don’t forget about software updates! Just like any other application, PostgreSQL also requires occasional updates for performance improvements or security fixes. After applying these updates, guess what? Yup – a restart is needed!
There are indeed multiple reasons why you might find yourself needing to restart your PostgreSQL server – configuration changes, clearing out active connections or after software updates. And trust me on this one – It’s easier than you think! However, remember not every change requires a full restart; sometimes reloading will suffice.
But hey, beware of common mistakes too! One such error folks often make is not properly shutting down their server before initiating a reboot – leading to potential data loss or corruption.
In essence:
- Configuration Changes: Some alterations require server reboot.
- Active Connections: Restart clears out lingering connections affecting performance.
- Software Updates: Post-update reboots ensure new features function correctly.
So, before you find yourself stuck in a rut with your PostgreSQL server’s performance, understand why and when a restart might just be the solution you’re searching for. Stay tuned for more insights on how to effectively manage your PostgreSQL database.
Steps to Safely Restart Your PostgreSQL Database
Ever found yourself in a situation where you need to restart your PostgreSQL database but aren’t quite sure how? Fear not, I’m here to guide you through the process.
Let’s start with the basics. To initiate a safe restart, use the command pg_ctl restart. But remember, before firing off this command, there’s a crucial step: make sure all active connections are safely closed. There’s nothing worse than losing valuable data because of an abrupt shutdown.
Next on our list is ensuring we’re using the right user privileges. Often people overlook this detail and end up facing permission issues during the restart process. Ensure you run your commands as a superuser or as the owner of the server process.
Now that we’ve got those covered, let’s talk about common mistakes to avoid:
- Forgetting to back up your data: This should be done regularly and especially before any major changes like restarting your database.
- Ignoring error messages: When PostgreSQL throws an error message at you, don’t ignore it! It could be indicative of bigger problems that need addressing.
- Not maintaining system logs: System logs provide critical information about what went wrong (if anything) during the restart process.
Running into trouble while restarting isn’t uncommon either. One common issue is when PostgreSQL fails to stop after running pg_ctl stop. In such cases, try using pg_ctl stop -m fast instead for immediate termination of all active connections.
In conclusion–scratch that–let me emphasize once more just how important these steps are for successfully restarting your PostgreSQL database. Backing up data, closing open connections correctly, utilizing appropriate user permissions – they’re all key components in ensuring smooth sailing while navigating through this seemingly daunting task!
Get Exclusive SQL Tips Right In Your Email Inbox
Plus SQL Cheat Sheets and more bonuses, all for FREE!
Common Errors When Restarting PostgreSQL and How to Solve Them
Let’s face it, even the most seasoned developers can run into a few snags when restarting PostgreSQL. From permission issues to database connection errors, there’s no shortage of potential pitfalls. I’ll walk you through some common problems and provide solutions to get your database back on track.
One frequent error message is “Could not connect to server: Connection refused.” This typically means that PostgreSQL isn’t running or that your settings in ‘pg_hba.conf’ are incorrect. The solution? Check if the server is running by using:
sudo service postgresql status
If it’s not running, start it up with:
sudo service postgresql start
Another common hiccup occurs when trying to restart the service as a user without sufficient privileges. You’ll likely see an error like “pg_ctl: could not send stop signal: Permission denied.” To navigate this issue, you should always ensure you’re operating as a superuser or use ‘sudo’ before any commands.
Then we have the notorious “FATAL: data directory “/var/lib/postgresql/9.x/main” has wrong ownership”. More often than not, this signifies that PostgreSQL doesn’t own its data directories. Here’s how you can rectify this:
sudo chown -R postgres:postgres /var/lib/postgresql/9.x/main
And let’s not forget about those pesky configuration file errors. If you’ve ever seen something like “configuration file “/etc/postgresql/9.x/main/pg_hba.conf” contains errors”, chances are there are syntax mistakes in your ‘pg_hba.conf’. So take another look at your file and correct any missteps.
In conclusion, while these troubleshooting tips should help resolve most of your restart issues with PostgreSQL, remember each case is unique and might require additional research. Don’t be discouraged if the solution isn’t immediately apparent – persistence is key!
Exploring Alternative Methods for PostgreSQL Restart
I’m going to delve into some alternative methods you can use to restart your PostgreSQL server. While the conventional method of using the pg_ctl utility is fine and dandy, it’s always good to have a few extra tricks up your sleeve!
One alternative is using the service command, which is often available in Linux-based systems. You’ll want to run sudo service postgresql restart. This should get things back on track in no time.
sudo service postgresql restart
Another common method involves utilizing the init.d script directly. It’s as simple as calling /etc/init.d/postgresql restart. Here’s how you do it:
/etc/init.d/postgresql restart
Yet another way might involve using systemd, a system and service manager for Linux. In this case, you’d go with systemctl restart postgresql. Like magic, your PostgreSQL server will be rejuvenated.
systemctl restart postgresql
Now let’s talk about potential pitfalls. One mistake folks often make is forgetting about user permissions – remember that these commands usually need sudo (superuser) privileges! Another common error happens when people forget to specify their PostgreSQL version in the command. For example, if you’re running PostgreSQL 9.3, your systemd command would actually look like:
systemctl restart postgresql-9.3
In sum, while there are various ways to skin this cat – from pg_ctl and service commands through init.d scripts and systemd – they all achieve the same end goal: getting your PostgreSQL server up and running again after a hiccup! Be sure not only to understand each method but also know when it’s most appropriate for use based on your specific setup or circumstances.
Conclusion: Ensuring Smooth Operations with Proper PostgreSQL Restart
Restarting your PostgreSQL database doesn’t have to be a daunting task. With the right steps, I can assure you that it’s as easy as pie. Let’s dive into the summary of what we’ve covered.
First off, we tackled how to stop the PostgreSQL service using command line interface (CLI). Remember, pg_ctl -D /usr/local/var/postgres stop is your magic phrase here. But sometimes things don’t go as planned. Mistyping this command is a common mistake and can lead to errors. So be sure to double check before hitting enter!
Next up was starting PostgreSQL service again with pg_ctl -D /usr/local/var/postgres start. It’s important not just firing off this command without verifying if Postgres has fully stopped. Patience is key here! Checking the status with pg_ctl -D /usr/local/var/postgres status ensures that your actions are correctly executed.
We also discussed about restarting PostgreSQL on different platforms such as Linux, Windows and MacOSX each having their own unique set of commands.
- For Linux users,
sudo systemctl restart postgresql - Windows folks can rely on
net stop postgresql-9.xfollowed bynet start postgresql-9.x - And for MacOSX users, it’s simply
/Library/PostgreSQL/9.X/bin/pg_ctl restart -D /Library/PostgreSQL/9.X/data
Don’t forget these are general instructions and might slightly vary based on your specific OS version or Postgres setup.
I’ve highlighted some common pitfalls along the way like rushing through commands without fully understanding them or not waiting long enough for services to stop completely before attempting a restart. These mistakes are easily avoidable with a little attention to detail and patience.
With these tips in mind, you’re well-equipped now to properly handle any required Postgres restarts. Keep exploring and remember, every expert was once a beginner!
Get Exclusive SQL Tips Right In Your Email Inbox
Plus SQL Cheat Sheets and more bonuses, all for FREE!
Related articles
- How to Divide one Column by Another in SQL – Quick Tricks for PostgreSQL and SQLite
- How to Connect pgAdmin with PostgreSQL: Your Easy Guide to Database Integration
- How to Get Last 7 Days Record in PostgreSQL: Your Quick Guide
- How to Import Data into PostgreSQL: Your Comprehensive Guide to Smooth Data Transfer
- How to Drop Database in PostgreSQL: Your Comprehensive Guide
- How to Check PostgreSQL Version: Your Quick and Easy Guide
- How to Check Database Size in PostgreSQL: Your Quick Guide
- How to Delete Table in PostgreSQL: Your Comprehensive Guide
- How to Create Index in PostgreSQL: Your Simplified Guide to Database Optimization
- How to Login to PostgreSQL: Your Ultimate Step-by-Step Guide
- How to Import Database in PostgreSQL: A Step-by-Step Guide for Beginners
- How to Backup PostgreSQL Database: Step-by-Step Guide for Secure Data Storage
- How to Import CSV into PostgreSQL: A Clear, Step-by-Step Guide
- How to Pivot in PostgreSQL: A Comprehensive Guide for Data Wrangling
- How to Call a Function in PostgreSQL: Your Easy Step-by-Step Guide
- How to Connect PostgreSQL Database: Your Comprehensive Guide for Seamless Integration
- How to Check if PostgreSQL is Running: Your Quick Guide
- How to Upgrade PostgreSQL: A Comprehensive Guide for a Seamless Transition
- How to Comment in PostgreSQL: An Essential Guide for Beginners
- How to Rename a Column in PostgreSQL: Your Quick and Easy Guide
- How to Concatenate in PostgreSQL: Your Ultimate Guide for String Combining
- How to Query a JSON Column in PostgreSQL: Your Clear, Step-by-Step Guide
- How to Install PostgreSQL: Your Easy Guide for a Smooth Installation
- How to Change PostgreSQL Password: A Quick and Easy Guide for Users
- How to Create a User in PostgreSQL: Your Ultimate Guide for Success
- How to Create a Database in PostgreSQL: Your Simple Step-by-Step Guide
- How to Start PostgreSQL: A Beginner’s Step-by-Step Guide
- How to Delete a Column in PostgreSQL: Your Quick Guide
- How to Connect PostgreSQL Database in Python: A Step-By-Step Guide for Beginners
- How to Scale PostgreSQL: A Comprehensive Guide for Rapid Growth
- How to Use PostgreSQL: Your Simple Guide to Navigating the Database World
- How to Get Current Date in PostgreSQL: Your Comprehensive Guide
- How to Restart PostgreSQL (Linux, Windows, Mac)
- How to Restart PostgreSQL (Linux, Windows, Mac)
- How to restart postgresql service in windows 10 when updating
- How to (re)start Postgres on Windows command line in background?
- Restart Postgres Service Windows
- Start PostgreSQL Server on Windows
- Linux PostgreSQL Restart Command
- Start Stop Disable Postgresql service
How to Restart PostgreSQL (Linux, Windows, Mac)
People also askALLPostgresql DocumentationPostgresql TutorialPostgresql
PlatformsPostgresql GithubPostgresql ForumsHow to stop Postgres from
autostarting during start up?How to stop Postgres from autostarting during
start up?How to stop postgres from autostarting during start up. On Ubuntu
16.04 or later (which use systemd) you’d use this command. sudo systemctl
disable postgresql. If you want to re-enable, you’d do. sudo systemctl enable
postgresql.Start Stop Disable Postgresql service — Windows Command Line
sudo systemctl status postgresql-13.service
sudo systemctl restart postgresql-13.service
sudo brew services restart postgresql
sudo systemctl status postgresql.service
sudo systemctl restart postgresql.service
sudo systemctl status postgresql-13.service
sudo systemctl restart postgresql-13.service
sudo systemctl status postgresql.service
sudo systemctl restart postgresql.service
sudo systemctl retart [email protected]
sudo systemctl status postgresql-13.service
sudo systemctl restart postgresql-13.serviceHow to Restart PostgreSQL (Linux, Windows, Mac)
In this section, we will learn how to restart Postgres in Windows. This
tutorial will work on Windows 10, Windows 8, 8.1, Windows 7. Press Windows key
-
R, ‘RUN’ box will appear. Type services.msc in the Run box …
sudo systemctl status postgresql-13.service
sudo systemctl restart postgresql-13.service
sudo brew services restart postgresql
sudo systemctl status postgresql.service
sudo systemctl restart postgresql.service
sudo systemctl status postgresql-13.service
sudo systemctl restart postgresql-13.service
sudo systemctl status postgresql.service
sudo systemctl restart postgresql.service
sudo systemctl retart [email protected]
sudo systemctl status postgresql-13.service
sudo systemctl restart postgresql-13.service
How to restart postgresql service in windows 10 when updating
pg_hba.config
Reload using pg_ctl. pg_ctl can be used to signal a reload to the server.
pg_ctl reload -D \path\to\datadirectory. The data directory is the one you
specified during installation. …
select pg_reload_conf();
pg_ctl reload -D \path\to\datadirectoryHow to (re)start Postgres on Windows command line in background?
My local Postgres server is configured to start when the computer starts. I
just changed postgresql.conf file and had to restart the server. I did: pg_ctl
restart from the …
pg_ctl restart
pg_ctl: old server process (PID: 2968) seems to be gone
starting server anyway
server starting
D:\>2016-10-12 16:24:48 EDT LOG: redirecting log output to logging collector proces
2016-10-12 16:24:48 EDT HINT: Future log output will appear in directory "pg_log".
pg_ctl restart -l %PGDATA%\server.logRestart Postgres Service Windows
How to restart postgresql service in windows 10 when updating pg_hba.config.
Reload using pg_ctl. pg_ctl can be used to signal a reload to the server.
pg_ctl reload -D …
sudo systemctl status postgresql-13.service
sudo systemctl restart postgresql-13.service
sudo brew services restart postgresql
sudo systemctl status postgresql.service
sudo systemctl restart postgresql.service
sudo systemctl status postgresql-13.service
sudo systemctl restart postgresql-13.service
sudo systemctl status postgresql.service
sudo systemctl restart postgresql.service
sudo systemctl retart [email protected]
sudo systemctl status postgresql-13.service
sudo systemctl restart postgresql-13.service
select pg_reload_conf();
pg_ctl reload -D \path\to\datadirectoryStart PostgreSQL Server on Windows
To start a server on Windows, go to your command prompt inside the PostgreSQL
installation for the BIN folder. pg_ctl start -D » [\data folder directory]»;
This will start your PostgreSQL …
pg_ctl start -D "[\data folder directory]";
pg_ctl -o "-F -p [post_number]" start
pg_ctl restart -D "[\data folder];
pg_ctl start company; --may or may not work / may produce errors
...
pg_ctl: another server might be running; trying to start server anyway
waiting for server to start....2022-04-28 19:28:38.766 PKT [3228] LOG: redirecting log output to logging collector process
2022-04-28 19:28:38.766 PKT [3228] HINT: Future log output will appear in directory "log".
stopped waiting
pg_ctl: could not start server
Examine the log output.
pg_ctl -o "-F -p 5656" start -D "C:\Program Files\PostgreSQL\14\data"
waiting for server to start....2022-04-28 19:34:04.588 PKT [11784] LOG: redirecting log output to logging collector process
2022-04-28 19:34:04.588 PKT [11784] HINT: Future log output will appear in directory "log".
done
server started
pg_ctl restart -D "C:\Program Files\PostgreSQL\14\data"
or
pg_ctl -o "-F -p 5656" restart -D "C:\Program Files\PostgreSQL\14\data"
waiting for server to shut down.... done
server stopped
waiting for server to start....2022-04-28 19:35:46.007 PKT [884] LOG: redirecting log output to logging collector process
2022-04-28 19:35:46.007 PKT [884] HINT: Future log output will appear in directory "log".
done
server started
NET START [service_name]
net start postgresql-x64-14;
The postgresql-x64-14 - PostgreSQL Server 14 service is starting.
The postgresql-x64-14 - PostgreSQL Server 14 service was started successfully.
System error 5 has occurred.
Access is denied.Linux PostgreSQL Restart Command
It is available on Windows, MacOS, Linux and Unix based systems. Today we will
show you how to restart postgresql on Linux, you will also learn how to stop,
start and get the full pgsql status from the Linux …
service postgresql status
/bin/systemctl status postgresql
su - postgres
/usr/local/pgsql/bin/pg_ctl status -D /usr/local/pgsql/data
su - postgres
/usr/local/pgsql/bin/pg_ctl stop -D /usr/local/pgsql/data
service postgresql stop
/bin/systemctl stop postgresql
su - postgres
/usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data >logfile 2>&1 &
service postgresql start
/bin/systemctl stop postgresql
su - postgres
/usr/local/pgsql/bin/pg_ctl stop -D /usr/local/pgsql/data
/usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data >logfile 2>&1 &
service postgresql restart
/bin/systemctl restart postgresql
nano -w /usr/local/pgsql/data/postgresql.conf
nano -w /var/lib/pgsql/data/pg_hba.confStart Stop Disable Postgresql service
Look for the service with the name postgresql . You can open the service
properties window by double-clicking on the service entry. From this
properties window you …
net start postgresql-9.0
net stop postgresql-9.0
sc config postgresql-9.0 start= disabled
sc config postgresql-9.0 start= demand
sc config postgresql-9.0 start= auto
Restart the service from windows command prompt(CMD).
net stop postgresql-9.0 & net start postgresql-9.0Description. pg_ctl is a utility for initializing a PostgreSQL database
cluster, starting, stopping, or restarting the PostgreSQL database server
(postgres), or displaying the status of a running …
$ pg_ctl start
$ pg_ctl -o "-F -p 5433" start
$ pg_ctl stop
$ pg_ctl stop -m smart
$ pg_ctl restart
$ pg_ctl -o "-F -p 5433" restart
$ pg_ctl status
pg_ctl: server is running (PID: 13718)
/usr/local/pgsql/bin/postgres "-D" "/usr/local/pgsql/data" "-p" "5433" "-B" "128"Summary: in this tutorial, you will learn how to restart PostgreSQL on Windows using Service Manager, command line, and pg_ctl command.
The following steps describe how to restart PostgreSQL on Windows using Service Manager (GUI):
- Press
Win+Rto open the Run dialog. - Type
services.mscand pressEnter. - In the
Serviceswindow, locate the PostgreSQL service. Typically, it is something likepostgresql-x64-<version>. - Right-click on it and select Stop to stop the service.
- After stopping the service, right-click on the service name.
- Select Start to start the service.
2) Restart PostgreSQL from the command line
If you prefer working with command, you can follow these steps to restart PostgreSQL:
Step 1. Open command prompt
- Press
Win+Rto open the Run dialog - Type
cmdandpress Ctrl+Shift+Enter(not Enter). This will allow you to run the command prompt as an Administrator. - A User Account Control pop-up will display, you can click the Yes button to acknowledge.
Stop the PostgreSQL service using the following command:
net stop postgresql-x64-<version>You need to replace <version> with your PostgreSQL version number. For example:
net stop postgresql-x64-16Output:
The postgresql-x64-16 - PostgreSQL Server 16 service is stopping.
The postgresql-x64-16 - PostgreSQL Server 16 service was stopped successfully.After the service has stopped, type the following command and press Enter to start the PostgreSQL service:
net start postgresql-x64-<version>For example:
net start postgresql-x64-16Output:
The postgresql-x64-16 - PostgreSQL Server 16 service is starting.
The postgresql-x64-16 - PostgreSQL Server 16 service was started successfully.3) Restart PostgreSQL using the pg_ctl command (CLI)
PostgreSQL offers the pg_ctl utility that allows you to initialize a PostgreSQL database instance, and start, stop, or restart the PostgreSQL database server.
The pg_ctl is typically located in the bin directory within the PostgreSQL installation directory.
The following shows you how to execute the pg_ctl command to restart PostgreSQL.
It assumes that the bin directory is included in the PATH environment variable, allowing you to call pg_ctl from any directory.
Step 1. Open a command prompt
- Press
Win+Rto open the Run dialog. - Type
cmdandpressCtrl+Shift+Enterto run the Command Prompt as an Administrator.
Step 2. Execute the pg_ctl command
Type the following pg_ctl command and press Enter:
pg_ctl -D "C:\Program Files\PostgreSQL\<version>\data" restartNote that you need to replace the <version> with the actual version of your PostgreSQL and change the data directory path (“C:\Program Files\PostgreSQL\<version>\data“) if it is different.
For example, to restart PostgreSQL 16.x, you can execute the following command:
pg_ctl -D "C:\Program Files\PostgreSQL\16\data" restartThis command will restart PostgreSQL.