Updated May 2025: Stop error messages and fix your computer problem with this tool. Get it now at this link
- Download and install the software.
- It will scan your computer for problems.
- The tool will then fix the issues that were found.
If you’re using Windows 10, system recovery can definitely be an issue for you on several occasions. If so, you may be aware of the mistake when you say so. “An unspecified error occurred during System Restore (0x80070002).” Alternatively, you may receive the code “System Restore Failed due to an Unspecified Error. The System Cannot Find The File Specified (0x8007002”. An incomplete system recovery process is obtained due to one of these error codes.
But no need to worry, we’ve put together the best solutions for you to easily remove this update. First, you need to scan your systems to make sure there is no malware. Also, make sure to turn off the antivirus software so that there are no problems with the system recovery process. If you still cannot complete the process, read the instructions below.
Check the Time and Date Settings
Details are the key to success. Weather settings have a major impact on updating Windows. Make sure date and time settings can solve your problem:
- Click on “Control Panel”
- Open “Date and Time”
- Press “Change date and time” and make corrections if necessary
- Configure the time zone before clicking OK
- Click the “Internet Time” tab before selecting “Change Settings”.
- Select “Synchronize with an Internet time server” before selecting the time server from the list that appears
- Touch “Update Now”
- Press “OK” twice to complete the configuration and to close all open windows
- Then restart your computer before accessing Windows Update. If you have set the wrong time on your system, the previous steps should correct error 0x80070002 for you.
Fix Hard Drive Failure with CHKDSK
The first way to fix system recovery error 0x80070002 is to find and repair hard drive errors using the Chkdsk utility:
Updated: May 2025
We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:
- Step 1 : Install PC Repair & Optimizer Tool (Windows 11, 10, 8, 7, XP, Vista).
- Step 2 : Click Start Scan to find out what issues are causing PC problems.
- Step 3 : Click on Repair All to correct all issues.
- Open the command prompt with administrator rights {Command Prompt (Admin)}.
- Type the following command and press Enter:
- chkdsk /F /R
- Type the Y key and press Enter to run the CHKDSK utility the next time you restart. Close the command prompt and restart your computer.
- After running CHKDSK, try to run System Restore again.
Delete the DefaultUser0 Account
If this issue occurs on a Windows 10 computer, the backup process is likely to fail due to a known error that results in creating a ghost account (defaultuser0) that Windows continues to try to insert even if it is not. The east no longer exists. This is all the more likely if the error logs contain a reference like this:
Backup encountered a problem while backing up file C:\Users\defaultuser0\Contacts. Error:( STATUS_WAIT_2
If this scenario is true, you should be able to fully resolve the problem by following a series of instructions that will guide you through the process of deleting your DefaultUser0 account. Here’s what you need to do:
- Press the Windows Key + R to open a Run dialog box. Then type “msconfig” in the Run box and press Enter to open the startup options screen.
- When you are on the Startup Options screen, select the Startup tab and select the Safe Startup checkbox (under Startup Options). Then set the associated switch to Minimum and click Apply to save the changes.
- Restart your computer and wait for the operating system to restart in safe mode.
- After the computer restarts, press the Windows key + R to open another Run dialog box. Then type “control” in the text box and press Enter to open the classic control panel interface.
- In the Classic Control Panel user interface, use the search function in the upper right corner to search for “User Accounts” and press Enter to view the results.
- In the result list, click Remove user account (under User account).
- When prompted by the User Account Control (UAC) prompt, click Yes to grant administrator privileges.
- In the Manage Account window, click the DefaultUser0 account to select it, and then click Remove Account on the next menu.
- When asked if you want to keep or delete DefaultUser0’s files, click Delete Files.
- At the final confirmation request, click Remove Account to confirm the process.
- Then open File Explorer (My Computer) and go to C: \ Users to see if the DefaultUser0 folder still exists. If so, right click on it and choose Remove to delete it.
- After deleting this folder, close the File Explorer (My Computer) window and open another Run field (Windows key + R). In the Run dialog box, type “regedit” and press Enter to open the Registry Editor. Under User Account Control, click Yes to grant administrator access.
- If you are in Registry Editor, navigate to the following location in the section on the left:
- Computer \ HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ ProfileList
- Note: You can navigate manually or insert the location directly into the navigation bar to jump immediately.
- When you get to the right place, select the subkey that starts with S-1-5-21 and then go to the field on the right.
- After selecting the appropriate subkey, go to the right section and double-click ProfileImagepath. If this path points to C: \ Users \ DefaultUser0, change it to point to the main profile you are using.
- Close the registry editor, restart your computer and try again with System Restore. Check if the problem has been resolved.
https://answers.microsoft.com/en-us/windows/forum/all/statuswait2-0x80070002-error-running-windows/a62e12f9-e96b-4041-abc7-c24336f5376a
RECOMMENATION: Click here for help with Windows errors.
What causes the error status_wait_2? How to fix the system restore error status_wait_2? This post from MiniTool will show you the solutions. In addition, you can visit MiniTool to find more system restore tips and solutions.
What Causes the Error Status_Wait_2?
Some users say they encounter the STATUS_WAIT_2 error when trying to create a system image using System Restore. In some cases, this error comes with the error code 0x80070002. The error of status_wait_2 often occurs on Windows 7, 8 and 10.
However, when encountering this system restore error 0x80070002, do you know what may cause it and how to fix it?
The error of status_wait_2 may be caused by various reasons, such as:
- Low-tier file corruption
- System restore inconsistency
- Windows 10 glitch
- OS corruption
Of course, the status_wait_2 (0x80070002) error may be caused by other reasons and we don’t list all of them.
After learning what the error status_wait_2 is, do you know how to fix it? So, in the following section, we will show you how to solve the error: (status_wait_2).
4 Ways to System Restore Error Status_Wait_2
In this section, we will show you how to fix the error status_wait_2 (0x80070002).
Way 1. Run SFC Tool
If there are corrupted system files on your computer, you may come across the error status_wait_2. So, in this situation, you need to run SFC tool to scan and repair corrupted system files on your computer.
Now, here is the tutorial.
- Open Command Prompt as administrator.
- Then type the command sfc /scannow and hit Enter to continue.
- Please do not close the command line window until you see the message verification 100% complete.
Once all steps are finished, reboot your computer and run System Restore again to check whether the status_wait_2 error is solved.
Way 2. Delete the DefaultUser0 Account
The error of status_wait_2 may be caused by a known bug that ends up creating a ghost account (defaultuser0) that Windows keeps trying to get a hold of even though it no longer exists. So, in this situation, you can choose to delete the defaultuser0 account.
Now, here is the tutorial.
1. Boot your computer into safe mode.
2. Then open Control Panel to continue.
3. In the Control Panel window, click User Account.
4. Then choose Remove user account under User Accounts section.
5. Then you will enter the Manage Accounts window. Select the DefaultUser0 account and choose Delete the account to continue.
6. Then you may receive a message which asks you whether you want to keep or delete the files belonging to Defaultuser0. Click Delete files to continue.
7. And then click Delete Account to confirm the operation.
8. Next, go to the File Explorer and navigate to C:\Users drive and check whether the DefaultUser0 is still here. If it is, select and delete it.
9. Once it is deleted, open the Registry Editor window.
10. Navigate to the path: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
11. Then select the sub-key that begins with S-1-5-21.
12. On the right panel, select the ProfileImagepath and double-click it to continue.
13. Then check whether the paths towards C:\Users\DefaultUser0. If it is, change it to point towards the primary profile that you’re using.
Once all steps are finished, reboot your computer and check whether the error status_wait_2 is fixed.
Way 3. Try a Third-Party Backup Software
If you have encountered the error status_wait_2 when creating a system image by using System Restore Windows 10, you can choose to use a piece of third-party backup software to back up the operating system. Thus, the professional Windows 10 backup software – MiniTool ShadowMaker is strongly recommended. It enables you to create the system image within a few steps.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Way 4. Reinstall OS
If the above solutions cannot help you to resolve the status_wait_2 (0x80070002), the last option you can choose is to reinstall the operating system. In general, reinstalling the OS is able to fix almost system errors. So, in order to fix the system restore error 0x80070002, you can try this solution. But please back up all your important files before going ahead.
Final Words
To sum up, in order to fix the error status_wait_2, this post has shown 4 ways. If you come across the same error, try these solutions. If you have any different ideas, you can share it in the comment zone.
The ‘STATUS_WAIT_2‘ error appears when some Windows users attempt to create a System Image Backup using System Restore. In some cases, this error is accompanied by the error code 0x80070002. This issue is reported to occur on Windows 7, Windows 8.1, and Windows 10.
As it turns out, there are several different causes that might end up triggering the STATUS_WAIT_2 Error:
- Low-tier File Corruption – Corruption affecting the System Restore utility is by far the most common cause that will spawn this error code. Some users that were previously dealing with this issue have reported that they were finally able to fix the issue by using a couple of built-in utilities (DISM and SFC) to clear the inconsistencies and allow the backup procedure to complete.
- System Restore inconsistency – Keep in mind that System Restore is no longer being maintained or developed for Windows 10, and Microsoft is probably not going to feature this utility on future releases simply because the competition has better products. Because of this, the simplest and most efficient way to get around this error code is to migrate over to a 3rd party backup utility.
- Windows 10 glitch – As it turns out, you can also see this error due to a weird Windows 10 glitch that ends up creating a persistent guest account (DefaultUser0) that the backup utility ends up using instead of the active one (the one with admin access). In this case, you need to delete this guest account completely while in Safe Mode before retrying the procedure.
- OS Corruption – In certain circumstances, you’ll end up seeing this error message due to a serious OS corruption issue that you will not be able to fix with the provided utilities. In this case, the only way forward is to re-initiate every Windows component with procedures like clean install or repair install.
Performing an SFC and DISM scans
If you tried to repeat the operation multiple times and every attempt fails with the same STATUS_WAIT_2 Error, it’s quite possible that you’re actually dealing with some type of system file corruption. Fortunately, there are a couple of utilities that every Windows version comes bundled by default that should allow you to fix this issue.
SFC (System File Checker) and DISM (Deployment Image Servicing and Management) are two solid utilities that will and up fixing the majority of low and medium tier instances of corruption. Some users that were previously struggling with this error message have confirmed that the STATUS_WAIT_2 error was fixed after they ran both scans in quick succession.
If you want to repeat this process, start with a simple SFC scan – Every dependency of this tool is stored locally so you can run it without an internet connection. But be careful that after you start it, interrupting the utility forcibly (by closing the CMD window) might produce additional logical errors.
Once the SFC scan is complete, restart your computer and wait for the next startup to complete.
After the next booting sequence is complete, go ahead and start a DISM scan.
Note: Keep in mind that this operation will require a stable Internet connection – DISM uses a sub-component of Windows Update to download healthy copies of the files that are affected by system file corruption.
Once the DISM scan is complete, do a final system reboot and repeat the action that was previously triggering the ‘STATUS_WAIT_2‘ error once the next startup is complete.
In case the same problem is still active, move down to the next potential fix below.
Using a 3rd party Backup equivalent
If the method above wasn’t effective for you and you don’t want to do anything too radical like resetting your Windows components, there are certainly some 3rd party alternatives that you might consider.
Keep in mind that System Restore, File History, System Image, and Backup are utilities that Microsoft is not actively maintaining and developing on Windows 10. It’s entirely possible that future Windows releases will no longer include System Restore since 3rd party equivalents are way better than the built-in solution.
If you’re looking for a 3rd program capable of doing the same thing as System restore, consider one of these free alternatives:
- Macrium Reflect
- Acronis True Image
- Clonezilla
- MiniTool Partition Wizard
- Solarwinds Backup
Note: All of the options presented above are either free or include a trial version.
In case you don’t want to use a 3rd party solution to create a backup of your Windows version, move down to the next potential fix below.
Deleting the DefaultUser0 Account (if applicable)
If you’re seeing this issue on a Windows 10 computer, it’s likely that the backup process fails due because of a known bug that ends up creating a ghost account (defaultuser0) that Windows keeps trying to get a hold of even though it no longer exists. This is even more likely if the logs of the error reveal a reference like this:
Backup encountered a problem while backing up file C:\Users\defaultuser0\Contacts. Error STATUS_WAIT_2
If this scenario is applicable, you should be able to fix the issue entirely by following a set of instructions that will guide you through the process of removing the DefaultUser0 account. Here’s what you need to do:
- Press Windows key + R to open up a Run dialog box. Next, type ‘msconfig’ inside the Run box and press Enter to open up the Startup Options screen.
Opening System Configuration - Once you’re inside the Startup Options screen, select the Boot tab and check the box associated with Safe boot (under Boot options). Next, set the associated toggle to minimal and click Apply to save the changes.
Saving the changes - Restart your computer and wait until your OS boots back up into Safe Mode.
- Once your computer boots back up, press Windows key + R to open up another Run dialog box. Next, type ‘control’ in the text box and press Enter to open up the Classic Control Panel interface.
Accessing the Classic Control Panel interface - When you’re inside the Classic Control Panel interface, use the search function in the top-right corner to search for ‘user accounts‘ and press Enter to see the results.
- From the list of results, click on Remove User accounts (under User Accounts).
Accessing the User Accounts menu in the classic Control Panel interface - If you’re prompted by the UAC (User Account Control) prompt, click Yes to grant administrative privileges.
- Once you’re inside the Manage Accounts window, click on the DefaultUser0 account to select it, then click on Delete the account from the next menu.
Deleting the DefaultUser0 account - When asked whether you want to keep or delete the files belonging to DefaultUser0, click on Delete files.
- At the final confirmation prompt, click on Delete Account to confirm the operation.
- Next, open File Explorer (My Computer) and navigate to C:\Users to see if the DefaultUser0 folder is still there. If it is, go ahead and right-click it and choose Delete to get rid of it.
Deleting the DefaultUser0 folder Note: If you’re prompted to grant admin access, click Yes at the User Account Control Prompt.
- Once that folder is deleted, close the File Explorer (My Computer) window and open up another Run box (Windows key + R). Inside the Run dialog box, type ‘regedit’ and press Enter to open up the Registry Editor. At the UAC (User Account Control), click Yes to grant admin access.
- Once you’re inside the Registry Editor, use the left-hand section to navigate to the following location:
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Note: You can either navigate there manually or you can paste the location directly into the navigation bar to get there instantly.
- When you get to the correct location, select the sub-key that begins with S-1-5-21 and then move over to the right-hand pane.
Selecting the correct sub-key from ProfileList key - Once you’ve selected the correct sub-key, move over to the right-hand side section and double-click on ProfileImagepath. If that path points towards C:\Users\DefaultUser0, change it to point towards the primary profile that you’re using.
Modifying the location of ProfileImagePath - Close Registry Editor, reboot your computer, and attempt to create a backup once again with System Restore and see if the problem is fixed.
In case you’re still encountering the same ‘STATUS_WAIT_2‘ error, move down to the next potential fix below.
Resetting every Windows Component
If none of the fixes above have worked for you, it’s likely that you’re dealing with some kind of serious system file corruption that you won’t be able to fix conventionally. If this scenario is applicable, you should simply go ahead and reset every relevant Windows component that might end up affecting the System Restore component.
You can do this either by going for a complete wipe of your OS drive or by targeting ONLY the files belonging to your operating system:
- Clean Install – This is the easier operation out of the two since you can do it directly from the menus of your Windows version and it doesn’t require you to use a compatible installation media. However, this is only recommended if you don’t really care about what happens with the personal data you’re currently storing on the drive.
- Repair install – This operation is also known as an in-place repair and is the recommended approach if the OS drive (C:\) currently stores data that you can’t afford to lose. But keep in mind that you need to use a compatible installation media to pull this through. However, the main advantage of this method is that all your applications, games, user preferences, and personal media will remain intact.
Kevin Arrows
Kevin Arrows is a highly experienced and knowledgeable technology specialist with over a decade of industry experience. He holds a Microsoft Certified Technology Specialist (MCTS) certification and has a deep passion for staying up-to-date on the latest tech developments. Kevin has written extensively on a wide range of tech-related topics, showcasing his expertise and knowledge in areas such as software development, cybersecurity, and cloud computing. His contributions to the tech field have been widely recognized and respected by his peers, and he is highly regarded for his ability to explain complex technical concepts in a clear and concise manner.
- The “STATUS_WAIT_2″ error occurs when some Windows users try to back up their system image using system restore.
- In some cases, this error is accompanied by error code 0x80070002.
- This problem is reported in Windows 7, Windows 8.1, and Windows 10.
- It turns out that several different causes can cause the error.
Welcome to this informative article where we delve into the perplexing realm of troubleshooting and fixing the notorious System Restore Error 0x80070002 STATUS_WAIT_2. Discover the solutions to overcome this challenging obstacle that may hinder your system’s restoration process.
Understanding the System Restore Error Code “STATUS_WAIT_2”
If you’re encountering the System Restore Error Code “STATUS_WAIT_2” (0x80070002) while trying to troubleshoot and fix system restore errors, there are a few steps you can take to resolve the issue.
First, try running the System File Checker (SFC) utility to scan for and repair any corrupted system files. Open a command prompt as an administrator and type “sfc /scannow“. This will scan your computer for any corrupt files and attempt to fix them.
If the SFC utility doesn’t resolve the issue, you can try using the Deployment Image Servicing and Management (DISM) tool. Open a command prompt as an administrator and type “dism /online /cleanup-image /restorehealth“. This will scan and repair any issues with the Windows operating system.
If the error persists, you can try booting your computer into safe mode and running the System Restore utility from there. To enter safe mode, restart your computer and repeatedly press the F8 key until the Advanced Boot Options menu appears. Select “Safe Mode” and then try running System Restore again.
If you’re encountering the System Restore Error Code “STATUS_WAIT_2” (0x80070002) on your Windows operating system, here are some steps to troubleshoot and fix the issue:
1. Check for OS corruption: Run the System File Checker utility to scan and repair any corrupted system files. Open Command Prompt as an administrator and type “sfc /scannow“.
2. Verify system image backup: Ensure that the system image backup is located on a separate volume or partition from the system disk. If not, move it to a different location.
3. Check disk for errors: Use the CHKDSK utility to scan and fix any disk errors. Open Command Prompt as an administrator and type “chkdsk C: /f /r“.
4. Install required updates: Make sure you have the latest Windows updates installed. Check for KB2919355 and install it if missing.
5. Try a different restore point: If the error persists, try using a different restore point to perform the system restore.
By following these steps, you should be able to troubleshoot and fix the System Restore Error Code “STATUS_WAIT_2” (0x80070002) on your Windows operating system. For more detailed instructions, refer to the article linked below.
[Link: Troubleshoot and Fix System Restore Error 0x80070002 STATUS_WAIT_2]
Steps to Resolve the System Restore Error Code “STATUS_WAIT_2”
- Open the Run dialog box by pressing Windows key + R.
- Type services.msc and press Enter to open the Services window.
- Scroll down and locate the System Restore Service in the list.
- Right-click on the service and select Restart.
- Wait for the service to restart and then close the Services window.
Repair Method 2: Check Available Disk Space
- Press Windows key + E to open File Explorer.
- Right-click on the C: drive and select Properties.
- Check the Available disk space and ensure it is sufficient for System Restore to function.
- If the disk space is low, delete unnecessary files or move them to an external storage device.
- Close the Properties window.
Repair Method 3: Run System File Checker
- Open the Command Prompt as an administrator by typing cmd in the Windows search bar, right-clicking on Command Prompt, and selecting Run as administrator.
- In the Command Prompt window, type sfc /scannow and press Enter.
- Wait for the System File Checker to scan and repair any corrupted system files.
- Once the scan is complete, restart your computer.
Repair Method 4: Disable Antivirus Software
- Open the Settings of your antivirus software.
- Locate the option to disable the antivirus temporarily.
- Select the option to disable the antivirus.
- Confirm the action and close the antivirus settings.
- Attempt to perform the System Restore again.
Repair Method 5: Perform a Clean Boot
- Press Windows key + R to open the Run dialog box.
- Type msconfig and press Enter to open the System Configuration window.
- In the System Configuration window, go to the Services tab.
- Check the box that says “Hide all Microsoft services.”
- Click on the Disable all button.
- Go to the Startup tab and click on Open Task Manager.
- In the Task Manager window, disable all the startup items by right-clicking on each one and selecting Disable.
- Close the Task Manager and go back to the System Configuration window.
- Click on OK and restart your computer.
Frequently Asked Questions about the System Restore Error Code “STATUS_WAIT_2”
| Question | Answer |
|---|---|
| What is the System Restore Error Code “STATUS_WAIT_2”? | The System Restore Error Code “STATUS_WAIT_2” (also known as error code 0x80070002) is an error that occurs when the System Restore utility fails to restore the computer to a previous restore point. It indicates that the system was unable to find the specified file or directory during the restore process. |
| What are the common causes of the System Restore Error Code “STATUS_WAIT_2”? | The common causes of the System Restore Error Code “STATUS_WAIT_2” include:
|
| How can I troubleshoot and fix the System Restore Error Code “STATUS_WAIT_2”? | To troubleshoot and fix the System Restore Error Code “STATUS_WAIT_2”, you can try the following solutions:
If none of these solutions work, you may need to perform a clean installation of Windows or seek assistance from a professional technician. |
| Can I prevent the System Restore Error Code “STATUS_WAIT_2” from occurring? | While it is not always possible to prevent the System Restore Error Code “STATUS_WAIT_2” from occurring, you can minimize the chances of encountering this error by regularly maintaining your computer. This includes keeping your system and software up to date, running regular antivirus scans, and regularly cleaning up unnecessary files and programs. |
Mark Ginter
Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed «geek», Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you’re looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.
System Restore error 0x80070002, STATUS_WAIT_2
- Perform SFC and DISM scan.
- Use a 3rd party Backup software.
- Delete the DefaultUser0 rogue account (if applicable)
- Perform a Fresh Start, In-place upgrade repair or Cloud Reset.
- How do I fix error 0x80070002?
- What does STATUS_WAIT_2 mean?
- How do I fix System Restore on Windows 10?
- How do I fix a failed system restore?
- What does error code 0x80070002 mean?
- What is 0x80070422 error?
- Can’t play the item is missing or we can’t get to it 0x80070002?
- How do I fix the system Cannot find the drive specified?
- Why did System Restore fail?
- How do I force a system restore?
- Can System Restore fix driver issues?
How do I fix error 0x80070002?
How can I fix Windows Update error 0x80070002?
- Stop Windows Update Service.
- Delete temporary update files in Software Distribution folder.
- Restart Windows Update Service.
- Check which updates are installed.
- Use DISM or System Update Readiness Tool.
- Run the App Troubleshooter.
- Perform a clean boot.
What does STATUS_WAIT_2 mean?
The ‘STATUS_WAIT_2’ error appears when some Windows users attempt to create a System Image Backup using System Restore. … Low-tier File Corruption – Corruption affecting the System Restore utility is by far the most common cause that will spawn this error code.
How do I fix System Restore on Windows 10?
Go to Settings on your PC > Update & Security > Recovery. Select Restart Now to enter into the Advanced Options menu. Then select Troubleshoot > Advanced Options > Startup Settings > Restart. Then select F4 to boot into Safe Mode.
How do I fix a failed system restore?
How to Fix System Restore and Recover Your System
- Try an alternative System Restore point.
- Run System Restore from Safe Mode.
- Configure your disk space usage.
- Ensure Windows creates System Restore points when it should.
- Use Reset, Refresh, or Repair to revive your system files.
What does error code 0x80070002 mean?
Error code: 0x80070002.» Windows update error is usually caused by time/date issue, file corruption or registry problem and it’s not difficult to fix it. The error happens when system update fails and the failure brings about data mismatch problem. Thus deletion of these corrupted files helps eliminate the error.
What is 0x80070422 error?
Windows 7 error 0x80070422 occurs when the Window Update service is not set to start automatically. While disabled, the service cannot run and users of the PC cannot download updates to Windows 7 or updates to software installed on the computer.
Can’t play the item is missing or we can’t get to it 0x80070002?
Bro, this error code means that something is wrong with permissions, or due to some reasons windows is not able to open any file. Try downloading it again(you have purchased it right?), check whether you have completely downloaded it.
How do I fix the system Cannot find the drive specified?
Solution 1 – Repair your registry
- Go to Start > type cmd > right-click Command Prompt > select Run as Administrator.
- Now type the sfc /scannow command.
- Wait for the scanning process to complete and then restart your computer. All corrupted files will be replaced on reboot. Then try to access the respective drive again.
Why did System Restore fail?
System Restore can fail because some software on your computer doesn’t understand or respect System Restore. Common culprits are virus and malware protection products and other programs that are typically loaded to provide some type of background service.
How do I force a system restore?
System Restore via Safe More
- Boot your computer.
- Press the F8 key before the Windows logo appears on your screen.
- At Advanced Boot Options, select Safe Mode with Command Prompt. …
- Press Enter.
- Type: rstrui.exe.
- Press Enter.
Can System Restore fix driver issues?
It is used to solve problems such as running tardiness, responding halt and other system problems of the PC. System restore will not affect any of your documents, images or other personal data, but it will remove apps, drivers, and other programs installed after the restore point was made.