Scanner utility for microsoft windows что это

C150-E213-02EN

Scanner Utility for

Microsoft Windows

<32bit>

Version 8.4

Introduction

Thank you for purchasing the «Scanner Utility for Microsoft Windows V8.4».
This software contains a TWAIN-compliant image scanner driver (simply called «d river» in this

guide) and utilities.
This guide provides a description summary of the driver, as well as a description of the

installation method and procedures for appropriate use. Please read this guide before starting to
use the software.

In addition, read the README.TXT file on the CD-ROM for the latest information not included
in this manual.

In this guide, product names are abbreviated as follows:

«Microsoft Windows 95 operating system»: «Windows 95»

«Microsoft Windows NT Workstation operating system Version 4.0″ and «Microsoft

Windows NT Server operating system Version 4.0″: «Windows NT 4.0»

«Microsoft Windows98 operating system»: «Windows98»

«Microsoft Windows 2000 Professional»: «Windows 2000»

«Microsoft Windows Millennium Edition»: «Windows Me»

When «Windows 95,» «Windows 98,» «Windows NT 4.0,» «Windows 2000″and
«Windows Me» are referred to collectively, they are simply referred to as «Windows». Unless
otherwise indicated, explanations refer to «Windows 95,» «Windows 98,» «Windows NT

4.0,» «Windows 2000,»and»Windows Me» collectively.

Trademarks

MS-DOS, Microsoft, Windows, and Windows NT are registered trademarks of Microsoft
Corporation.

IBM PC/AT and DOS/V are registered trademark of International Business Machine
Corporation.

Adaptec is a registered trademark of Adaptec Inc.
EZ-SCSI is a trademark of Adaptec Inc.
Other product names are the trademarks or registered trademarks of the respective companies.

ii

Organization

This manual explains how to install and use this driver, and how to use the TWAIN scanning
utility.

TWAIN

This section gives an overview of the TWAIN specification.

Installation

This section explains the procedure for installing the environments in which this driver may
operate.

Using the Driver

This section explains how to use the driver.

Using the Utilities

Use of the following utilities is explained:

Using the Gamma Pattern Editor

Trouble shooting

This section explains the possible causes of error messages and operation errors and the
corresponding recommended actions.

Appendix

The appendix contains the specifications of image scanners.

iii

Contents

1. Outline……………………………………………………………………………………..1

1.1 Characteristics of this Driver…………………………………………………………………………1

1.2 Operating Environment…………………………………………………………………………………1

1.3 Explanatory Notes ………………………………………………………………………………………..2

1.4 Explanation of terms……………………………………………………………………………………..3

2. TWAIN………………………………………………………………………………………4

2.1 TWAIN………………………………………………………………………………………………………….4

2.2 TWAIN Application………………………………………………………………………………………..4

3. Installation……………………………………………………………………………….6

3.1 Preparation…………………………………………………………………………………………………..6

3.2 Starting Installation……………………………………………………………………………………….6

3.3 Uninstall………………………………………………………………………………………………………..8

4. Using the Driver……………………………………………………………………….9

4.1 Selecting the Driver………………………………………………………………………………………9

4.2 Screen Configuration………………………………………………………………………………….10

4.3 Displaying Driver Information……………………………………………………………………..11

4.4 Setting Information on Image Scanning……………………………………………………..12

4.5 Specifying Driver Operation……………………………………………………………………….19

4.6 Setting «Scanning Area» …………………………………………………………………………….21

4.7 Setting Options…………………………………………………………………………………………..22

4.7.1 Rotation……………………………………………………………………………………………………23

4.7.2 Job/Cache………………………………………………………………………………………………..25

4.7.3 Generic…………………………………………………………………………………………………….29

4.7.4 Imprinter (Endorser) …………………………………………………………………………………..30

4.7.5 Start Up……………………………………………………………………………………………………33

4.8 Setting Advance Options ……………………………………………………………………………35

iv

4.8.1 Gray…………………………………………………………………………………………………………36

4.8.2 Image Filter ………………………………………………………………………………………………38

4.8.3 DTC…………………………………………………………………………………………………………40

4.8.4 When Color is specified……………………………………………………………………………..43

4.9 Setting the Configuration Options……………………………………………………………….47

4.10 Basic Scan Dialog……………………………………………………………………………………50

4.11 Download Pattern File……………………………………………………………………………..52

5. Using the Gamma Pattern Editor…………………………………………….56

5.1 Start-up………………………………………………………………………………………………………56

5.2 [File] menu…………………………………………………………………………………………………57

5.3 [Help] menu………………………………………………………………………………………………..58

5.4 Gamma Pattern Editing………………………………………………………………………………59

6. How to Use the FUJITSU Scanner Control Center………………….60

6.1 Outline ……………………………………………………………………………………………………….60

6.2 How to Start the FUJITSU Scanner Control Center……………………………………60

6.3 Pop-up Menu……………………………………………………………………………………………..61

7. Using the Firmware Updater…………………………………………………..66

8. Troubleshooting……………………………………………………………………..68

8.1 Error Messages………………………………………………………………………………………….68

8.1.1 Messages from the TWAIN Driver……………………………………………………………….68

8.1.2 Error messages relating to gamma correction pattern editing…………………………76

8.1.3 Messages concerning to FUJITSU Scanner Control Center…………………………..77

8.1.4. Messages relating to the Firmware Updater………………………………………………..79

8.2 Device Trouble Related to Operation…………………………………………………………81

9. Appendix………………………………………………………………………………..82

9.1 Relevant Image Scanner Specification………………………………………………………82

9.2 Maintenance Service………………………………………………………………………………..107

v

1. Outline

1.1 Characteristics of this Driver

This driver complies with TWAIN regulations V1. 8 (the latest version as of May 2000),

which are global standards for image scanners. The driver can be used in all TWAIN­compliant applications.

This driver also supports an image scanner that has the «double-sided scan» function. If the

application supports cont inuous scan, a double -sided document can be scanned.

1.2 Operating Environment

This driver can be used in the following systems:

An IBM PC/AT compatible machine (recommended: Intel Pentium 100MHz or higher) on

which one of the following operating systems are installed

Microsoft

Microsoft

Microsoft

Microsoft

recommended)

Microsoft

later recommended)

Microso ft

Windows 95

Windows 98

Windows Me

Windows NT Server Version 4.0 (Installation of Service Pack 3 or later

Windows NT Workstation Version 4.0 (Installation of Service Pack 3 or

Windows 2000 Professional

Adaptec SCSI adapter or Fujitsu FMV SCSI adapter

In some cases, the driver may not operate with the above systems. Please check in

advance with your place of purchase.

Notes are provided on the accepted SCSI adapters in README.TXT, which is included

in the installation media. Please read these notes before use.

Adaptec EX-SCSITM Pro Version 4.5 or later or the following 32-bit versions of ASPI

Manager (included, for example, in the Adaptec SCSI installer for Windows 95/Win dows
NT or on Fujitsu SCSI driver disk V1.2):

Windows 95, Windows 98, Windows NT 4.0
Windows 2000 , Professional Edition

V4.01 or later
V4.60 or later

RAM of 32 megabytes or more (64MB or above is recommended)

Free hard disk space of 10 megabyte or more (Except the range for the Image storing.)

CD-ROM drive (required for installation)

Mouse (recommended)

1

1.3 Explanatory Notes

The descriptions in this manual are prepared based on the following rules:
Menus and buttons

The menus and buttons used in the program description are enclosed in [].
Example: [File] menu , [OK] button

Keyboard

The keytop indications comply with the standard keyboard of the Fujitsu FMV series.
Major differences between the Fujitsu FMV keyboard and other keyboards are shown below.
FMV keytops Other possible keytops
Alt Previous screen, GRPH
Ctrl CTRL
Esc ESC
Enter Return,
Shift SHIFT
Back space Backspace, BS
F1 PF1, f-1

Terms related to mouse operation

Terms related to major mouse operations are explained below.
Click: To press and release the mouse button
Double click: To quickly press the mouse button twice
Drag: Move the mouse while keeping the mouse button pressed

Notes on operation procedures

If some menus need to be operated in a certa in order, the procedural order is described as
follows:

[A] — [B] — [C]

In accordance with this description, operation [A] is executed first, followed by [B] and [C]
in that order.

Figures

Figures and screen operations in this guide refer to Microsoft Windows 2000. They are
also followed when using other operating systems.

Note that the expressions may vary with the type of scanner connected.

2

1.4 Explanation of terms

IPC option board

IPC-2/2D in this guide refers to the IPC-2 and IPC-2D image processing circuit.
IPC-3/3D in this guide refers to the IPC-3 and IPC-3D option board.

3

2. TWAIN

2.1 TWAIN

TWAIN is the specification that defines the standard software protocol and application
programming interface (API) for data exchange between a software application program and an
image input device such as the image scanner.

[TWAIN development background]
In the past, development of a new scanner inevitably required the development of a compatible

driver and a sample (demonstration) program exclusively designed for the new scanner. As the
scanner is upgraded, the driver may need to be upgraded as well to maintain its compatibility
with the upgraded scanner. Therefore, the use is most likely to be restricted to one specific
scanner model to avoid the complication of learning new operation methods and replacing the
peripheral driver, etc., involved in scanner replacement.

In view of the incompatibility among different scanners and peripheral equipment and the
accompanying inconvenience, there was a demand for standardization of the related hardware
and software, and TWAIN was established as a result.

The user may now choose among all the input devices and software (driver or application
programs) conforming to the TWAIN standard, and configure a most suita ble system for himself,
without being restricted to the products of a certain series or a certain manufacturer.

2.2 TWAIN Application

TWAIN mainly applies to the following three software components:

Application software
Source manager
ƒ Source

The components are related to each other as shown below.

4

Application software

(photo retouching software, etc)

Source manager

(TWAIN.DLL/TWAIN_32.DLL, etc)

ƒSource

(Image scanner control of the driver, etc)

Image scanner , etc.

Figure TWAIN Application

5

3. Installation

3.1 Preparation

1. Check that the operating system is installed correctly.

2. Check that the SCSI adapter is connected to the computer.

3. Check whether the SCSI driver and ASPI manager are installed correctly and operating (For
windows 2000, 4.60 or later)

Note
Version 4.01 or later of the ASPI Manager is required. Use Explorer or a similar program

to check the version number of the WNASPI32.DLL file.
The environment setup tools described later can be used for checking.

4. If the previous version was installed, first confirm that it has been uninstalled (deleted).

5. Confirm that there is sufficient free space on the hard disk to install the software.

3.2 Starting Installation

1. Start Windows.

Note
A user name with administrator authority must be used to log on to Windows(R) 2000 or

Windows NT(R) 4.0.
Ask the system administrator for the details of logging on.

2. Close any other currently open applications.

3. Insert the setup CD-ROM in the CD-ROM drive. Here, the CD-ROM drive is temporarily
called «D:». (If the environment you are using is different, replace the appropriate parts
below.)

4. Double-click on «install.exe» in the «D: \Driver1\ASPI» folder of the CD-ROM using
Explorer. Then, installation starts.

When an automatic start is specified, the start screen of the setup disk is displayed.
Installation can be started from this screen too.

5. When the setup screen is displayed, continue the process by following the on-screen
instructions.

6. Confirm that the following group is created when setup has been completed. The displayed
icon depends on the selection of «Components» during installation.

6

Figure Fujitsu TWAIN group

* For the FUJITSU Scanner Control Center, the Gamma Pattern Editor and the Firmware
Updater, see section 6, 5, and 7 respectively.

7

3.3 Uninstall

The uninstall process removes the software and returns the hard disk to its pre-installation state.

1. Click on [Start], followed by [Settings], and then [Control Panel]. The Control Panel is then

2. Double-click on «Add/Remove Programs» from the icon list of the Control Panel. The panel

3. Select «Scanner Utility for Microsoft Windows» from the «Install/Uninstall» list.

4. Click on the [Add/Remove] button. When the confirmation dialog is displayed, click on

5. When uninstallation is completed, click on [OK.]

Note
Image files that have been scanned and saved will not be deleted.
If other TWAIN -compliant applications and drivers have been installed and you are asked

displayed.

of properties of [Add/Remove Programs] is displayed.

[OK] if you are ready to uninstall.

whether or not to delete files shared with them such as the TWAIN Manager, select [NO]
to avoid deleting them.

8

4. Using the Driver

4.1 Selecting the Driver

To use this driver from the TWAIN application, select «FUJITSU TWAIN32» from the TWAIN
data source (driver) selection screen. For general application, the data source selection screen is
display ed by selecting the [Select Scanner] or [Acquire …] menu. Refer to the instruction
manual for the application used for details.

9

4.2 Screen Configuration

Figure Main Dialog

The following pages contain the explanation and operation description for each part.

10

4.3 Displaying Driver Information

Image scanner name

The model name, option port name, and capacity of internal scanner memory (in units of
megabytes) of the connected image scanner are displayed.

If no image scanner is connected, this field is blank.
To change the selected scanner, click the [Select …] button to display a list of connected

scanners and select a scanner from the list.
The type of IPC option board is displayed if an image -processing option board is installed in

the scanner.
IPC-3/3D may not be detected normally, as it is affected by the version number of the

machine type and device. In this case, «IPC2» is displayed.

Preview window

The preview window is used to display the temporary image of read data and for setting the
«Scanning Area.»

For settings, see «Scanning Area» later in this manual. Also see the description of the
[Preview] button later in this manual.

Ruler

The large divisions are labeled as «Unit». The scale also varies with the selected scanner.

Message line

The message line is the bottom line of the dialog in which a brief explanation of an input
item or a setting item is displayed when the mouse cursor is moved over the item.

11

Data size

The approximate amount of data per image when data is scanned in the present option.

Note
This value is the amount of uncompressed data. The size of the stored file will differ from

this value and is usually smaller if image compression is chosen and the image is
compressed.

4.4 Setting Information on Image Scanning

Current side

When a scanner that allows duplex scanning is used, specifies the page which sets the image
scanning information.

To scan using the same settings as those for «Front side» and «Back side ,» clear the checks in
the » Individual Setting» checkbox on the «Front» and «Back» tabs. A single «Duplex» tab
will be displayed at the left so that the same image scanning information can be set for
«Front side» and «Back side .»

To scan using different settings for «Front side» and «Back side,» check the «Individual
Setting» checkbox on the «Front» and «Back» tabs . Two tabs, «Front» and «Back,» will be
displayed at the left. Select each tab and enter the desired settings.

This is only effective when ADF (Duplex) is selected for the method of paper feed. For
scanner types which permit duplex scanning, see «Relevant Image Scanner Specification» in
the Appendix.

Resolution

Specifies the number of pixels (dots) per inch.
Select a fixed resolution from the list or [Custom].
High resolution requires more memory.
The supported resolution depends on the type of scanner and the options installed. See

«Relevant Image Scanner Specification» in the Appendix.

12

Paper Size

Selects a paper size corresponding to the size of the document to be scanned.
Select a standard paper size from the list or [Custom]. If [Custom] is selected, the «Custom

Paper Size Setting» dialog appears. Enter the size of the document to be scanned. (In this
case, specify the paper size by width x length for the scanning direction.)

Some paper sizes may not be accepted by your device. See «Relevant Image Scanner
Specification» in Appendix.

Figure Custom paper size setting dialog

To specify a custom paper size, use the slider or enter the paper size directly. The applicable
unit here is the unit specified under [Option]-[Generic]-[Unit/Scaling].

Scanning Area

Specifies the start position, width and length for the image scan. The maximum allowable
size is the paper size selected previously.

In addition, the minimum size is 1.000 inch, 26 millimeters, or pixels (number of dots per
inch) according to the unit that has been set.

«Left»: The left end of the scan area on the scanned document (X coordinate)
«Top»: The top end of the scan area or the scanned document (Y coordinate)
«Width»: The width of the scan area
«Length»: The length of the scan area
These values are related to one another in the following way:

0 left end coordinate < (paper width — minimum scan area size)

0 top end coordinate < (paper length — minimum scan area size)
Minimum value width (paper width — left end coordinate)
Minimum value length (paper length — top end coordinate)

13

Scan Type

Selects the feeding device.
The image scanner uses a document bed called the flat bed as well as an automatic document

feeder (ADF) for feeding scanned document. The ADF usually enables the documents to be
scanned only once. The flat bed allows scanning the same documents repeatedly.

Flatbed

Reads a document placed on the flat bed of the device.

ADF (Front Side )

Reads the document on the device’s automatic document feeder (ADF).
Here, only front side is read.

ADF (Duplex)

To scan both the front and the back of a page, select this option.
If this option is selected, the document is scanned in the «front to back to front to back …»

order.
This option can be used only for scanner models that support duplex scanning.
The «Duplex Function» requires that the calling application supports «continuous scan.» If

the application does not support «continuous scan,» only the data for the front side of the
page is passed to the application.

Some scanner models do not support this option. See «Relevant Image Scanner
Specification» in the Appendix.

Long page (front)

To scan the entire side of a long page whose length exceeds the vertical size of an A3 sheet,
select this option.

The front side and back side can be specified using the same method used for ADF.
If this option is selected, the «Paper Size Setting» dialog box opens. Specify the size of the

document to be scanned.
In this mode, however, the preview window cannot be displayed and the scanning area

cannot be specified.
Scanner models that do not support this option do not display the «Scan Type» selection item.

14

Long page (front and backside)

In the same case as that for scanning the front of a long page, this option is selected in order
to scan the entire side of a long page whose length exceeds the vertical size of an A3 sheet.

If this option is selected, the document is scanned in the «front to back to front to back…»
order.

Paper feeding method that is to be supported varies with the type of scanner. See «Relevant
Image Scanner Specification» in the Appendix.

ADF (Back Side )

Reads the document on the device’s automatic document feeder (ADF).
Here, only back side is read.

Note
To specify duplex scanning, the number of copies designated should be based on the

number of pages, not the number of paper sheets. In other words, one original with a front
and back is regarded as two pages.

Image Mode

Selects an image mode for scanning the image.
Select a corresponding image mode from the list.

Black & White

Scans data by using the fixed threshold binary, black-and-white. Distinguishes black

from white by the setting in the «Threshold» of «Scanning Parameter.» This scanning

mode is suitable for scanning line drawings and text documents.

Halftone (Dither)

Scans data using the halftone processing, with dithering or error diffusion. Uses the

patterns set in «Halftone» to simulate data in black-and-white. Selection of built -in

dithered patterns or error diffusion (not supported by some device models) is allowed.

This scanning mode is suitable for scanning images containing light and shadow such as

a photograph.

Gray scale

Scans data us ing 256-level monochrome gray scale. Light and shade in photographs can

be represented with greater fidelity. This scanning mode employs far more memory

than the Black & White mode.

Some versions of the scanner do not support this scanning mode. For deta ils contact the

retail store where the device was purchased.

15

Color

Scans data using 24 bits color. This mode is suitable for scanning color photograph and

employs far more memory that Gray scale mode.

Some versions of the scanner do not support this scanning mode. For details contact the

retail store where the device was purchased.

Automatic separation

This option specifies whether to distinguish line drawing from photograph image during

scanning.

If this option is selected, the line drawing part is scanne d using «Black & White,» and

the photograph part is scanned using «halftone». This information is most suitable for

documents containing both photographs, and line drawings or text.

SEE (Selectable edge enhancement)

Line drawing and photograph image are scanned using «halftone.» Then, only line

drawing part is highlighted.

This scanning mode is suitable for emphasizing only characters in the documents that

consists of characters and photographs.

Depending on the model of the scanner, this function may not be supported. For details,

refer to «Relevant Image Scanner Specification» in Section 9, Appendix.

Black & White

Specifies the processing method when «Black & White» is specified in «Image Mode».

Static Threshold

Executes simple binary processing based on the «Threshold» setting.

SDTC, DTC mode

To enable the auto binary function of the image scanner, specify this option.

If this option is selected, the «Threshold» setting will be disabled.

In addition, auto binary has two modes: «SDTC Mode» and «DTC Mode .» These

modes can be set using the «Advance» dialog box.

«DTC Mode», however, is limited to the image processing options. Therefore, only

scanner models that have image processing options support «DTC Mode .» See

«Relevant Image Scanner Specification» in the Appendix.

SDTC mode (Floating Slice)

This option enables scanning and fine binary processing for documents whose
backgrounds are other than white such as newspapers.

Some scanner models do not support this option. See «Image Scanner Specification» in
Appendix.

16

Halftone

Selects the halftone pattern for halftone scanning from the built — in pattern list.
Select the desired halftone pattern for displaying the obtained image. This setting is

effective when «Halftone» or «Automatic Separation» is selected in «Image Mode».

Dither Pattern 0

Executes pattern processing that is suitable for scanning a dark photograph.

Dither Pattern 1

Executes pattern processing that is suitable for scanning a dark-colored document

containing both text and photographs.

Dither Pattern 2

Executes pattern processing that is suitable for scanning a light photograph.

Dither Pattern 3

Executes pattern processing that is suitable for scanning a light-colored document

containing both text and photographs.

Download Pattern

Executes processing using the dithered download pattern specified in the dithered

download file (described later). Some scanner models do not support this function. See

«Imag e Scanner Specification» in Appendix.

Error Diffusion

Error Diffusion minimizes the difference between the pixel density of the scanned image

and the pixel density of the printed image to create better reproduction of a scanned

photograph.

Some scanner models do not support this function. See «Relevant Image Scanner

Specification» in Appendix.

Scanning Parameters

For fine scan adjustments.
Since there is no fixed set of values, set by trial and error.
Brightness:

Sets the brightness of the overall image .

Specify the brightness with a number in the range of 1 (bright) to 255 (dark).

To brighten the overall image, decrease the value of the setting. To darken the overall

image, increase the value.

17

This parameter can be set if «Halftone» or «Automatic Separation» is selected for «Image

Mode.»

Threshold:

Sets the threshold value by which the black and the white of black-and-white images are

distinguished. Specify a number in the range of 1 (bright) to 255 (dark). This parameter

can be set only if «Black & White» is specified for «Image Mode.»

In addition, if «Auto Binary» is selected, the scanner will automatically use the

appropriate threshold value. As a result, the set value cannot be changed.

In addition, if «Auto Binary» is selected, the scanner will automatically use the

appropriate threshold value. As a result, the set value cannot be changed.

If the light color in the scanned document is read as white, increase the threshold value.

To eliminate light- colored areas in the scanned document, decrease this value.

18

Contrast:

Sets the contrast of light and shadow in a scanned image.

Specify the contrast with a number in the range of 1 (low [soft]) to 255 (high [sharp]).

The contrast can be set if «Gray Scale» is selected in «Image Mode .»

If this value is increased, the dark part of the image is shown darker and the light part is

shown lighter.

Some scanner models do not support this function. See «Relevant Image Scanner

Specification» in Appendix.

4.5 Specifying Driver Operation

[Preview]

Reads in a preliminary image based on set values, and displays the image in the preview
window.

Before actual scanning, the preview function can be used to display the entire document for
specifying the desired scan area.

This function is available only on de vices that support the use of a flat bed. Some models do
not support this function. See «Relevant Image Scanner Specification».

[Scan]

Scans the specified scan range based on set values.
The following «progress indicator» is displayed during scanning to show the progress of the

scan operation. To stop scanning, click the [Cancel] button.
The character string indicates the data transfer mode used between the driver and the

application.

19

Progress indicator

[Close] / [OK]

Closes the dialog box without scanning.
If a setting is changed, the changed setting is saved in the initial value file.

[Reset]

Restores the current setting values to the status immediately after the window is opened.

[Help]

Displays online help. When the [F1] key is pressed, help information regarding the item on
which the cursor is placed is displayed.

Note
Depending on the application used help information may not be displayable with the [F1]

key. This is because the driver operation is controlled through the app lication and the [F1]
key may be used differently in each application program.
Help information can be displayed by pressing the [F1] key while holding down the [Ctrl]
or [Shift] key.

[Option]

Displays the «option dialog» for setting device-specific func tions. See Section 4.7, «Setting
Option» described later.

20

[Advance]

Displays the «advance dialog » for settings related to color variance and image processing.

[Config]

Displays the «basic scan dialog» for managing the settings file and for setting simple scan
dialog switching.

[About]

Express the version of this driver by clicking this button.

4.6 Setting «Scanning Area»

Specify the scan area in the preview window as follows:

Setting:

1. Press the left mouse button to specify the origin (top left corner) of the scanning area.

(The cursor appears as a «+».)

2. Drag the mouse to show the outline of the scanning area. (As the cursor moves, a range

frame is shown.)

3. Release the left mouse button again to set the range (bottom right corner) of the scanning

area.

Movement:

1. Move the cursor into the range frame. (The cursor appears as a hand.)

2. Press the left mouse button. (The cursor changes to a fist.)

3. Drag the mouse to move the range frame.

4. Release the left mouse button to set the current range.

Cancellation:

The range frame can be canceled by either of the following ways:

Click the left mouse button outside the range frame (inside the scan document).

Select other paper types.

21

4.7 Setting Options

The «option dialog» is used to set device-specific functions and the items that differ depending
on whether the scanner used supports them.

The option specification is divided into «Rotation», «Job/Cache», «Generic», «Imprinter
(Endorser)» and «Start Up». .

The supported options depend on the scanner. See «Relevant Image Scanner Specification» in
the Appendix. ( is displayed for options that cannot be used.)
The option dialog in this driver is explained below.
The commonly used buttons are explained first.

[OK]

Enables the new setting, and terminates the option dialog box.

[Cancel]

Disables the new setting, returns the setting to the previous value, and terminates the
processing.

[Help]

Displays online help.

22

The options are described below:

4.7.1 Rotation

Figure Option dialog (Rotation)

Flip Side Rotation

Specifies the binding of the document when both sides are scanned using ADF.

Book

Outputs the scanned image for both sides as is.

Select this option to scan documents bound on the left or right side.

Fanfold

Outputs the scanned image of the backside rotated 180 degrees.

Select this option to scan documents bound on the top or bottom (Front side and

backside are printed conversely.)

* When scanning from the top to bottom for the printing direction of the document, this

setting outputs the image with the front and backsides printed in the same direction.

23

Rotation Degree

Outputs the scanned image rotated to the right or left 90 degrees.

0.0 degree

Outputs the scanned image as is.

90.0 degree

Outputs the scanned image rotated 90 degrees to the right (clockwise).

-90.0 degree

Outputs the scanned image rotated 90 degrees to the left (counterclockwise).

180.0 degree

Outputs the scanned image rotated 180 degrees (top and bottom reversed).

Automatic Size and Skew detection

Disable

This option outputs the image as it was scanned.

Automatic Deskew

When scanning with the ADF, this option detects skew of the document being fed and

automatically corrects the skew.

Automatic Paper Size Detection

This option detects the document size and outputs the image of that size.

If the documents of different sizes are scanned continuously with ADF, the output

images corresponding with the original size can be obtained.

If an application does not support unde fined image size data scanning, this function may

not work properly with these applications .

Black Background

If it is selected, the outside of document paper becomes black by using black

background during scanning.

This option may not be supported for some scanners. See «Relevant Image Scanner
Specification» in the Appendix.

24

Loading…

Fujitsu Scanner Utility for Microsoft Windows is a software product for Windows developed by PFU LIMITED

It is reported that the following Windows processes are part of Fujitsu Scanner Utility for Microsoft Windows:

  • FtLnSOP.exe
  • ScandAllProLite. exe
  • FImage.exe
  • Advogar.exe
  • DriverPack-Online 1133169204. 1495104942. exe

If you want to remove Fujitsu Scanner Utility for Microsoft Windows from your computer, just go to Start > Control Panel > Add/Remove programs and select Fujitsu Scanner Utility for Microsoft Windows from the list of programs.

Other products developed by PFU LIMITED

  • PfuSsOrgPDF2JPEG
  • AriesRAS
  • Scan to Office
  • BIP
  • Scanner Central Admin Agent
  • PassiveIndicator
  • ScanSnapUpdater. exe
  • ScandAll PRO (ScanSnap mode)
  • fi-5000N Configuration Tool
  • PaperStream IP
  • SsUWatcher.exe
  • PfuSsOrgOcrChk
  • Raku2AutoImp Application
  • PFU LIMITED FJTSVKIC
  • EmbedWare/SysMon Entry
  • RkWkDesk Application
  • FJTWSVSZ
  • PaperStream Capture
  • FJTWMKSZ
  • PfuSsOrgOcr
  • PfuSSSct.exe
  • PfuSsFirmwareUpdate
  • SsUGatherNotify. exe
  • RKiwrtKS Application
  • VirtualBinder Application

If you know how to use complimentary Vista software, you can scan documents fast.

i Thomas Northcut/Photodisc/Getty Images

Fujitsu scanners use a program to interface between the scanner and Windows computers called Scanner Utility for Microsoft Windows (SUMW). This program was developed by Fujitsu and is only used on Fujitsu scanners. It is a TWAIN utility, which means that it provides interconnectivity between a computer and a scanner. It is not possible to install a new version of SUMW on top of an older version—the first version must be completely uninstalled prior to installing new software. Sometimes the automatic uninstallation will not work correctly, and the new software won’t install. If that happens, you need to uninstall the SUMW manually.

Step 1

Click «Start» then «Control Panel» then click «Uninstall a Program.» Scroll down until you see «Scanner Utility for Microsoft Windows» in the list then click on it. Press the «Uninstall» button at the top of the list. Follow the on-screen instructions to complete the uninstallation process.

Step 2

Restart your computer. If the SUMW is still not completely uninstalled, you will need to edit the registry settings on your computer to remove the last vestiges of the program. Click «Start» then type «Run» in the search bar and press «Enter.» Type «regedit» and then press «Enter.»

Step 3

Click «Edit» then «Find» and type «scanner util» into the search field, then press «Enter.» Wait for the registry to search for your term. Look at what it finds to make sure that it relates to a Fujitsu Scanner Utility for Microsoft Windows. If it does, then press «Delete» on your keyboard and confirm that you want to delete the registry entry. Press «F3» to find the next entry. Delete all the registry entries that relate to the SUMW. Restart your computer.

References

Warnings

  • Modify your computer’s registry only as a last resort. Modifying the registry can make your computer unstable or unusable. Contact customer support for more information.

Writer Bio

James T Wood is a teacher, blogger and author. Since 2009 he has published two books and numerous articles, both online and in print. His work experience has spanned the computer world, from sales and support to training and repair. He is also an accomplished public speaker and PowerPoint presenter.

The genuine FjtwMkup.exe file is a software component of Scanner Utility for Microsoft Windows by .
A TWAIN scanning utility from Fujitsu, this application was designed for 32-bit systems and is a very basic scanning interface. Installed with a device driver, it allows you to preview and scan documents and pictures to your hard drive. This utility is for older PCs and considered outdated. Founded in 1935 in Japan, Fujitsu ranks third in the world for providing information technology services.

The .exe extension on a filename indicates an executable file. Executable files may, in some cases, harm your computer. Therefore, please read below to decide for yourself whether the FjtwMkup.exe on your computer is a Trojan that you should remove, or whether it is a file belonging to the Windows operating system or to a trusted application.

Click to Run a Free Scan for FjtwMkup.exe related errors

FjtwMkup.exe file information

Windows Task Manager with FjtwMkup

FjtwMkup.exe process in Windows Task Manager

The process known as FjtwMkup belongs to software Scanner Utility for Microsoft Windows by FUJITSU LIMITED (www.fujitsu.com).

Description: FjtwMkup.exe is not essential for the Windows OS and causes relatively few problems. FjtwMkup.exe is located in a subfolder of C:\Windows (for example C:\Windows\twain_32\fjscan32\).
Known file sizes on Windows 10/11/7 are 139,264 bytes (52% of all occurrences) or 131,072 bytes.  

The program has no visible window. It is located in the Windows folder, but it is not a Windows core file. The process is loaded during the Windows boot process (see Registry key: MACHINE\Run).
The FjtwMkup.exe file is not a Windows core file.
FjtwMkup.exe is able to record keyboard and mouse inputs.
Therefore the technical security rating is 56% dangerous.

Recommended: Identify FjtwMkup.exe related errors

Important: Some malware camouflages itself as FjtwMkup.exe, particularly when located in the C:\Windows or C:\Windows\System32 folder. Therefore, you should check the FjtwMkup.exe process on your PC to see if it is a threat. We recommend Security Task Manager for verifying your computer’s security. This was one of the Top Download Picks of The Washington Post and PC World.

Best practices for resolving FjtwMkup issues

A clean and tidy computer is the key requirement for avoiding problems with FjtwMkup. This means running a scan for malware, cleaning your hard drive using 1cleanmgr and 2sfc /scannow, 3uninstalling programs that you no longer need, checking for Autostart programs (using 4msconfig) and enabling Windows’ 5Automatic Update. Always remember to perform periodic backups, or at least to set restore points.

Should you experience an actual problem, try to recall the last thing you did, or the last thing you installed before the problem appeared for the first time. Use the 6resmon command to identify the processes that are causing your problem. Even for serious problems, rather than reinstalling Windows, you are better off repairing of your installation or, for Windows 8 and later versions, executing the 7DISM.exe /Online /Cleanup-image /Restorehealth command. This allows you to repair the operating system without losing data.

To help you analyze the FjtwMkup.exe process on your computer, the following programs have proven to be helpful: ASecurity Task Manager displays all running Windows tasks, including embedded hidden processes, such as keyboard and browser monitoring or Autostart entries. A unique security risk rating indicates the likelihood of the process being potential spyware, malware or a Trojan. BMalwarebytes Anti-Malware detects and removes sleeping spyware, adware, Trojans, keyloggers, malware and trackers from your hard drive.

Other processes

winstartmenulauncher.exe key.dll shdtray.exe FjtwMkup.exe dlpsrv.exe vsixautoupdate.exe garena.exe cocimanager.exe onlinemanager_service.exe null.sys listicka-x64.exe [all]

Addeddate
2021-05-24 00:10:08
Identifier
manualzilla-id-6904058
Identifier-ark
ark:/13960/t2b96fw77
Ocr
tesseract 5.0.0-alpha-20201231-10-g1236
Ocr_autonomous
true
Ocr_detected_lang
en
Ocr_detected_lang_conf
1.0000
Ocr_detected_script
Latin
Cyrillic
Ocr_detected_script_conf
0.9500
0.0500
Ocr_module_version
0.0.13
Ocr_parameters
-l kir+eng+kaz+lat+Cyrillic+Latin
Page_number_confidence
95.65

comment

Reviews

There are no reviews yet. Be the first one to
write a review.

129

Views

DOWNLOAD OPTIONS

Temporarily Unavailable

DAISY

For users with print-disabilities

Temporarily Unavailable

EPUB

Uploaded by

chris85

on

Понравилась статья? Поделить с друзьями:
0 0 голоса
Рейтинг статьи
Подписаться
Уведомить о
guest

0 комментариев
Старые
Новые Популярные
Межтекстовые Отзывы
Посмотреть все комментарии
  • Hobdrive для windows ce
  • Как не вводить пароль при установке windows
  • Samsung np355v5x драйвера windows 10
  • Administrator command prompt windows 10 как открыть
  • Usb to uart driver for windows