Сброс пароля bios из под windows

Forgetting passwords is something we all know too well. Usually, clicking on the “Forgot Password” option and following a few simple steps can get you back in, but it doesn’t always work that way. If you forget your BIOS password, which is a password set to stop people from changing BIOS settings or to prevent your computer from starting up, you might not be able to start your computer at all.

Fortunately, like for everything out there, there exist a few workarounds to this problem. We will go through those workarounds/solutions to forgetting the BIOS password in this article and hopefully be able to log you back into your system.

Картинка с сайта: techcult.com

What is the Basic Input/Output System (BIOS)?

Basic Input/Output System (BIOS) is the firmware used during the booting process to perform hardware initialization, and it also provides runtime service for programs and operating systems. In layman’s terms, a computer’s microprocessor uses the BIOS program to get the computer system started after you hit the ON button on your CPU. BIOS also manages the flow of data between a computer’s operating system and the devices attached like hard disk, keyboard, printer, mouse, and video adapter.

What is the BIOS Password?

A BIOS Password is the verification information required now and then to log into a computer’s basic input/output system before the booting process starts. However, the BIOS password needs to be manually enabled and is thus mostly found on corporate computers and not personal systems.

 The password is stored in the Complementary Metal-Oxide Semiconductor (CMOS) memory. In some types of computers, it is maintained in a small battery attached to the motherboard. It prevents unauthorized use of computers by providing an extra layer of security. It can cause problems sometimes; for example, if a computer owner forgets his password or an employee gives back his/her computer without disclosing the password, the computer won’t boot up.

There are five primary methods for resetting or removing the BIOS password. They range from trying a dozen different passwords to gain access to popping a button off your system’s motherboard. None are too complicated, but they do require some amount of effort and patience.

Method 1: BIOS Password Backdoor

Few BIOS manufacturers keep a ‘master’ password to access the BIOS menu which works irrespective of the password set by the user. The master password is used for testing and troubleshooting purposes; it is a type of fail-safe. This is the easiest of all methods on the list and the least technical. We recommend this as your first try, as it does not require you to crack open your system.

1. When you are at the window to enter the password, enter an incorrect password thrice; a fail-safe called ‘checksum’ will pop up.

A message arrives informing the system has been disabled or the password has failed with a number displayed within square brackets below the message; carefully note down this number.

2. Visit the BIOS Master Password Generator, enter the number in the text box, and then click on the blue button that reads ‘Get password’ right below it.

Картинка с сайта: techcult.com

3. After you click on the button, the website will list a few possible passwords which you can try one by one, starting from the code labeled ‘Generic Phoenix’. If the first code doesn’t get you in the BIOS settings, work your way down the list of codes until you find success. One of the codes will surely give you access irrespective of the password set by you or your employer.

Картинка с сайта: techcult.com

4. Once you get in with one of the passwords, all you have to do is restart your computer, and you will be able to enter the same BIOS password once again without any problem.

Note: You can ignore the ‘system disabled’ message as it is just there to scare you.

Method 2: Removing CMOS Battery to Bypass BIOS Password

As mentioned earlier, BIOS Password is saved in the Complementary Metal-Oxide Semiconductor (CMOS) memory along with all other BIOS settings. It is a small battery attached to the motherboard, which stores settings like date and time. This is especially true for older computers. Therefore, this method won’t work in a few newer systems as they have nonvolatile storage flash memory or EEPROM, which doesn’t require power to store the BIOS settings password. But it’s still worth a shot as this method is the least complicated.

1. Turn off your computer, unplug the power cord, and disconnect all cables. (Note down the exact locations and placement of cables to help you with the reinstallation)

2. Open the desktop case or laptop panel. Take out the motherboard and find the CMOS battery. The CMOS battery is a silver coined shaped battery located inside the motherboard.

3. Use something flat and blunt like a butter knife to pop the battery out. Be precise and careful not accidentally damage the motherboard or yourself. Note the direction in which the CMOS battery is installed, usually the engraved positive side towards you.

4. Store the battery in a clean and dry place for at least 30 minutes before putting it back in its original place. This will reset all the BIOS settings, including the BIOS password that we are trying to get through.

5. Plug back all the cords and turn on the system to check if the BIOS information has been reset. While the system boots, you can choose to set a new BIOS password, and if you do, please note it down for future purposes.

Картинка с сайта: techcult.com

Also Read: How to Check if your PC is using UEFI or Legacy BIOS

Method 3: Bypass or Reset BIOS Password Using Motherboard Jumper

This probably is the most effective way to get rid of the BIOS password on modern systems.  

Most motherboards contain a jumper that clears all the CMOS settings along with the BIOS password. Jumpers are responsible for closing the electrical circuit and thus the flow of electricity. These are used to configure computer peripherals like hard drives, motherboards, sound cards, modems, etc.

(Disclaimer: We recommend being extremely careful when performing this method or taking the aid of a professional technician, especially in modern laptops.)

1. Pop open your system’s cabinet (CPU) and take out the motherboard carefully.

2. Find the jumpers, they are a few pins sticking out from the motherboard with some plastic covering at the end, called jumper block. They are mostly located along the edge of the board, if not, try near the CMOS battery or near the CPU. On laptops, you can also try looking under the keyboard or for the bottom of a laptop. Once found note their position.

Картинка с сайта: techcult.com

In most cases, they are labeled as any of the following:

• CLR_CMOS
• CLEAR CMOS
• CLEAR
• CLEAR RTC
• JCMOS1
• PWD
• PSWD
• PASSWORD
• PASSWD
• CLEARPWD
• CLR

3. Remove the jumper pins from their current position and place them over the remaining two empty positions. For example, in a computer’s motherboard, if 2 and 3 are covered, then move them to 3 and 4.

Note: Laptops generally have DIP switches instead of jumpers, for which you only have to move the switch up or down.

4. Connect all the cables as they were and turn the system back on; check that the password has been cleared. Now, proceed by repeating steps 1, 2, and 3 and moving the jumper back to its original position.

Method 4: Reset BIOS Password Using Third-party Software

Sometimes the password is only protecting the BIOS utility and not requiring to start the Windows; in such cases, you can try a third-party program to decrypt the password.

There is a lot of third-party software available online that can reset BIOS Passwords like CMOSPwd. You can download it from this website and follow the given instructions.

Method 5: Remove BIOS Password Using Command Prompt

The final method is only for those who already have access to their system and want to remove or reset the CMOS settings along with the BIOS password.

1. Start off by opening a command prompt on your computer. Simply press Windows key + S on your computer, search Command Prompt, right-click and select Run As Administrator.

Картинка с сайта: techcult.com

2. In the command prompt, run the following commands, one by one, to reset CMOS settings.

Remember to type each one of them carefully, and press enter before entering the next command.

debug
o 70 2E
o 71 FF
quit

3. Once you have successfully executed all the above commands, restart your computer to reset all the CMOS settings and the BIOS password.

Other than the methods explained above, there is another, more time-consuming, and lengthy solution to your BIOS annoyances. BIOS manufacturers always set some generic or default passwords, and in this method, you will have to try each one of them to see whatever gets you in. Each manufacturer has a different set of passwords, and you can find most of them listed here: Generic BIOS password listing. Try the passwords listed against your BIOS manufacturer’s name and let us & everyone know which one worked for you in the comments section below.

Recommended: How to Copy an Image to Clipboard on Android

However, if you still aren’t able to remove or reset the BIOS Password, try contacting the manufacturer and explaining the issue.

Bios password is a security feature that is designed to prevent unauthorized access to the BIOS settings of a computer. However, there are instances when users forget or misplace their bios passwords, making it difficult for them to access and make changes to their computer settings. In this blog post, we will explore different methods that can be used to remove bios password on Windows 10. We will provide detailed steps for each method, along with their pros and cons. So, if you are facing issues with your bios password on Windows 10, continue reading to find the solution that works best for you.

Video Tutorial:

What’s Needed

To remove bios password on Windows 10, you will need the following:

1. A computer running on the Windows 10 operating system.
2. Administrative access to the computer.
3. Internet connectivity (optional, depending on the method chosen).
4. Basic computer skills.

What Requires Your Focus?

Removing bios password on Windows 10 can be a technical process, so it is important to pay attention to the steps provided and follow them carefully. It is also crucial to ensure that you have administrative access to the computer in order to make any changes to the BIOS settings. Additionally, some methods may require you to have an external storage device, such as a USB flash drive, to create a bootable media. Make sure to gather all the necessary information and tools before proceeding with any of the methods mentioned below.

Method 1: Using Backdoor Passwords

Backdoor passwords are universal passwords that are built into the BIOS firmware by the manufacturers. These passwords can be used to bypass the bios password and gain access to the BIOS settings. Here’s how you can remove bios password using backdoor passwords:

Step 1. Start your computer and press the specific key (such as F2 or Del) to enter the BIOS setup.
Step 2. Once you are in the BIOS setup, navigate to the Security tab or section.
Step 3. Look for an option called “Set Supervisor Password” or similar.
Step 4. Enter a random password and press Enter. If the entered password is incorrect, you will see an error message.
Step 5. Repeat step 4 for three times. After the third incorrect attempt, the system will display a code or a “System Disabled” message along with a code.
Step 6. Note down the displayed code.
Step 7. Visit the BIOS Password Backdoors website (www.biospasswordbackdoors.com) from another device or computer with internet access.
Step 8. Enter the code you obtained in step 6 and search for the corresponding backdoor password.
Step 9. Once you have the backdoor password, restart your computer and enter the BIOS setup again.
Step 10. Enter the backdoor password when prompted to remove the bios password.

Method 2: Via BIOS Reset Jumper

Another method to remove bios password on Windows 10 is by using the BIOS reset jumper. This method involves physically manipulating the motherboard to reset the BIOS settings. Here’s how you can do it:

Step 1. Shut down your computer and disconnect the power cord.
Step 2. Open the computer case and locate the BIOS reset jumper on the motherboard. It is usually labeled as “CLR_CMOS” or “CLEAR CMOS.”
Step 3. Take note of the original position of the jumper by referring to the motherboard manual.
Step 4. Move the BIOS reset jumper from its original position to the reset position. This will clear the BIOS settings and remove the bios password.
Step 5. Wait for a few seconds and then move the BIOS reset jumper back to its original position.
Step 6. Close the computer case and reconnect the power cord.
Step 7. Start your computer and enter the BIOS setup. The bios password should now be removed.

Method 3: Using CMOS Battery

The CMOS battery is a small battery located on the motherboard that powers the CMOS memory. By removing the CMOS battery and disconnecting the power source, you can reset the BIOS settings and remove the bios password. Here’s how you can do it:

Step 1. Shut down your computer and disconnect the power cord.
Step 2. Open the computer case and locate the CMOS battery on the motherboard. It is a small, round battery.
Step 3. Gently remove the CMOS battery from its socket. You may need to use a non-conductive tool, such as a plastic pry tool, to avoid damaging the battery or other components.
Step 4. Press and hold the power button of your computer for at least 10 seconds to discharge any remaining power.
Step 5. Wait for approximately 10-15 minutes to ensure that all residual power is drained.
Step 6. Reinsert the CMOS battery back into its socket.
Step 7. Close the computer case and reconnect the power cord.
Step 8. Start your computer and enter the BIOS setup. The bios password should now be removed.

Method 4: Via Software Tools

If the above methods do not work or you prefer a software-based solution, there are several third-party software tools available that can help you remove bios password on Windows 10. One such tool is “PC CMOS Cleaner.” Here’s how you can use it:

Step 1. Download “PC CMOS Cleaner” from the official website or a trusted source.
Step 2. Create a bootable media, such as a USB flash drive, with the downloaded “PC CMOS Cleaner” software.
Step 3. Insert the bootable media into the computer and restart it.
Step 4. Boot from the bootable media and launch the “PC CMOS Cleaner” software.
Step 5. Follow the on-screen instructions to remove the bios password.

Why Can’t I Remove Bios Password?

There can be several reasons why you are unable to remove bios password on Windows 10. Some common reasons include:

1. Forgotten or misplaced password: If you have forgotten or misplaced your bios password, it can be difficult to remove it without the correct password or appropriate methods.
2. Security measures: Some computers may have additional security measures such as TPM (Trusted Platform Module) or a password set by the manufacturer that cannot be easily bypassed.
3. Hardware restrictions: Certain computer models or hardware configurations may have restrictions in place that prevent easy removal of the bios password.

To fix these issues, you can try the following:

1. Contact the manufacturer: Reach out to the manufacturer of your computer or motherboard for specific instructions or assistance in removing the bios password.
2. Seek professional help: If you are unable to resolve the issue on your own, consider contacting a professional computer technician or a service center that specializes in BIOS-related matters.
3. Reset the computer: If all else fails, you may need to reset your computer to its factory settings, which will remove all passwords and settings, including the bios password. However, this will also result in the loss of any data or customizations, so make sure to back up your important files before proceeding.

Implications and Recommendations

Removing the bios password can have several implications, both positive and negative. Here are some recommendations to consider:

1. Use strong passwords: After removing the bios password, it is important to set a strong, unique password for your BIOS settings to ensure the security of your computer.
2. Regularly update your BIOS: Keeping your BIOS up to date with the latest firmware can help improve compatibility, stability, and security.
3. Secure physical access to your computer: Prevent unauthorized access to your computer by limiting physical access and ensuring that it is always in a secure location.
4. Backup important data: Before making any changes to your computer’s settings or firmware, it is always recommended to back up your important data to prevent any potential data loss.

5 FAQs about Removing Bios Password

Q1: Can I remove the bios password without opening up my computer?

A: Some methods, such as using backdoor passwords or software tools, do not require opening up the computer. However, methods like resetting the BIOS jumper or removing the CMOS battery may require accessing the inside of your computer.

Q2: Will removing the bios password void the warranty of my computer?

A: Removing the bios password, especially by physically manipulating the hardware, may void the warranty of your computer. It is important to check the warranty terms and conditions, and consider seeking professional assistance if you are unsure.

Q3: How do I find the BIOS reset jumper on my motherboard?

A: The location of the BIOS reset jumper may vary depending on the motherboard model. Referring to the motherboard manual or contacting the manufacturer’s support can help you identify the location of the BIOS reset jumper.

Q4: Are there any risks involved in removing the bios password?

A: Removing the bios password, especially through physical manipulation, carries certain risks, such as damaging the motherboard or other components. It is important to proceed with caution and follow the instructions carefully. If you are unsure, seek professional assistance.

Q5: What should I do if none of the methods work?

A: If none of the methods mentioned in this blog post work, consider reaching out to the manufacturer or a professional computer technician for further assistance. They may have specific solutions or tools that can help in such situations.

Final Words

Removing bios password on Windows 10 can be a challenging task, but with the right methods and careful execution, it is possible to regain access to your computer’s BIOS settings. We have explored various methods in this blog post, including using backdoor passwords, resetting the BIOS jumper, removing the CMOS battery, and using software tools. Each method has its pros and cons, so it is important to choose the one that suits your situation best. Remember to follow the steps provided and exercise caution when making any changes to your computer’s settings or hardware.{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:” Can I remove the bios password without opening up my computer?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:” Some methods, such as using backdoor passwords or software tools, do not require opening up the computer. However, methods like resetting the BIOS jumper or removing the CMOS battery may require accessing the inside of your computer.”}},{“@type”:”Question”,”name”:” Will removing the bios password void the warranty of my computer?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:” Removing the bios password, especially by physically manipulating the hardware, may void the warranty of your computer. It is important to check the warranty terms and conditions, and consider seeking professional assistance if you are unsure.”}},{“@type”:”Question”,”name”:” How do I find the BIOS reset jumper on my motherboard?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:” The location of the BIOS reset jumper may vary depending on the motherboard model. Referring to the motherboard manual or contacting the manufacturer’s support can help you identify the location of the BIOS reset jumper.”}},{“@type”:”Question”,”name”:” Are there any risks involved in removing the bios password?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:” Removing the bios password, especially through physical manipulation, carries certain risks, such as damaging the motherboard or other components. It is important to proceed with caution and follow the instructions carefully. If you are unsure, seek professional assistance.”}},{“@type”:”Question”,”name”:” What should I do if none of the methods work?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:” If none of the methods mentioned in this blog post work, consider reaching out to the manufacturer or a professional computer technician for further assistance. They may have specific solutions or tools that can help in such situations.”}}]}