В этой статье мы разберемся, как создать специальную UEFI загрузочную USB флешку (диск) для последующей установки Windows 8 или Windows Server 2012 на оборудовании в нативном режиме UEFI.
Мы ранее уже описывали, как создать загрузочную флешку с Windows 8, однако дело в том, что подобную флешку нельзя использовать для установки ОС системы с UEFI (подробнее про UEFI и Windows 8). Данная флешка, хотя и определится в системе, но загрузка с нее будет невозможной.
Проблема заключается в том, что большинство утилит, создающих загрузочные флешки (в том числе созданные с помощью Windows 7 USB/DVD Download Tool) форматируют устройство в файловой системе NTFS, а UEFI не поддерживают загрузку с носителя с NTFS (также и c файловой системы exFat), такие системы грузятся только с FAT32.
Поэтому нам нужно создать загрузочный диск с FAT32 и скопировать на него дистрибутив Windows.
Что нам понадобится для создание загрузочной UEFI флешки:
- USB флешка или диск, размером не менее 4 Гб
- Дистрибутив Windows 8 или Windows Server 2012 на DVD или в iso образе
- Процедура выполняется с помощью утилиты diskpart на компьютере с Windows 7/8/2008/2012
Подключите флешку в свободный USB порт компьютера (чтобы не было путаницы, все остальные USB устройства хранения лучше отключить ). Откройте командную строку с правами администратора и выполните следующие команды:
- Запустите утилиту управления разделами Diskpart:
diskpart
- Выведите список дисков в системе командой
list disk
- Выберите диск, соответствующий вашей флешке (можно сориентироваться по размеру диска)
select disk 1
- Удостоверьтесь, что на предыдущем шаге вы выбрали именно флешку, т.к. сейчас мы удалим на ней все данные
clean
- Создайте первичный раздел
create partition primary
- Выберите его
select partition 1
- Сделаем его активным
active
- Отформатируйте флешку в файловой системе FAT32 (напомним, что в системе UEFI загрузка возможна только с FAT32, но не с NTFS)
format fs fat32 quick
- Задайте букву созданному диску
assign
- Завершите работу с DiskPart
exit
Далее нам нужно скопировать файлы дистрибутива Windows 8 x64 на созданную нами загрузочную флешку. Для этого монтируем диск с образом Windows 8 (допустим это будет диск H:, а флешке присвоена буква F:) и с помощью команды xcopy копируем все его содержимое на флешку
xcopy H:\* F:\ /s /e
Если вы делаете загрузочную флешку UEFI для 64-битных Windows Vista SP1, Windows 7 или Windows Server 2008 R2, нужно на флешке создать каталог EFI и скопировать каталог boot в нее. Подробно процесс создания загрузочной usb флешки с Windows 7 под UEFI
Теперь с данного носителя можно установить операционную систему в режиме UEFI. Не забудьте перед началом установки отключить Security Boot в параметрах загрузки системы (в UEFI — ex BIOS). После окончания установки Windows Security Boot можно включить (более подробно о режиме Secure Boot в Windows 8).
Today we are going to look at how to make a UEFI bootable USB drive for Windows 8 or Windows Server 2012. Now that I’ve finally joined the UEFI world with the ASUS P8z77 WS motherboard, I’ve been trying to get UEFI to actually work. UEFI is supposed to be the replacement for the venerable BIOS that has been with us since the 70’s. One big UEFI upgrade is the ability to boot off of new devices easier.
Although the title suggests that this guide is for Windows 8 and Windows Server 2012, this should work for Windows 7 and Windows Server 2008 R2. All of these Microsoft operating systems support UEFI but only the x64 versions of the OS! This all seems great. I’ve got Windows 8 RTM. I’ve installed the old fashioned way with a BIOS boot, and really want to do it the UEFI way. I started of thinking in this modern world it should be easy, boy was I wrong. Weeks later still no UEFI installed OS.
I made bootable USB versions of the Windows 8 and Windows 7 setup discs using the official Microsoft tool to do so. But the USB sticks never showed as UEFI bootable. After some Google searching I discovered that most UEFI motherboard cannot boot from NTFS devices only FAT32. This does not sit well with me. Why work to a new UEFI standard then make the bootable USB device a FAT32 standard? For those wondering, FAT32 is from the mid 1990’s. UEFI bootable USB drives are a more recent development.
So I’ve decided to show how it can be done, without wasting many hours getting the info from all over the web. I hope it is of use to others. I’ve taken these notes working on my desktop to test along the way.
UEFI Bootable USB Drive Guide Requirements:
- UEFI capable motherboard, for Intel this means Desktop 60 series chipset (or LGA1155/2011/1356 CPU+)
- I recommend a 4GB USB stick, as it will fit all the UEFI capable OS’s, you could go bigger but NOT smaller!
- You will need a running version of Windows 7/8/server, as you need access to ‘Diskpart’
- You will need the Install files for the OS you want to make a UEFI capable boot USB disk for, this means either a ISO you can extract the files from, a DVD you can copy the files from or another USB disk with the files.
- A spare disk that is prefereably blank or already GPT partitioned (not MBR), this is vital, UEFI = GPT partitioning or it won’t work.
From the Windows 7, Windows 8 or Windows Server machine:
- First, remove all USB and or other external devices as this could make finding the USB device in Diskpart hard or harder.
- Click on ‘Start’
- In the bottom ‘Search programs and files’ type ‘Diskpart’. You will be greeted with a command prompt and a screen as in picture below.
- You then need to select the USB drive as you likely have more than one drive installed. When you get to the command “select drive” choose the number that corresponds to the USB device you want to format.
Be careful if you choose the wrong drive you could loose data on that drive. You have been warned.
Here is a quick guide to the diskpart commands you will be using:
list disk
select disk x (where x is USB drive number from list
clean (wipes everything, so be sure!)
create partition primary
active
format fs fat32 quick (vital it’s FAT32 for UEFI boot to succeed if NTFS fails)
assign
exit (to exit out of Diskpart)
You are now ready to copy the UEFI installation files to the drive. Select all the files from the original Windows install media, and paste them into the USB disk.
With all OS’s prior to Windows 8 and Windows Server 2012, there is one more step. If you are using Windows Vista SP1, Windows 7, Windows Server 2008 R2 (all 64bit). On the newly created USB disk, make a new dir called ‘EFI’, copy the ‘boot’ directory into the ‘EFI’ directory. Do not move the files.
Next Steps for UEFI Booting in Windows 8 and Windows Server 2012
Now the UEFI bootable USB disk should be ready to setup a new install of the Windows OS. Place in computer where it will be installed. In UEFI capable motherboards, make sure that UEFI is enabled. If the BIOS doesn’t detect the Bootable UEFI USB drive, you may need to select it as a boot option via keystroke. It is vital that you have UEFI enabled, or you will just boot via the BIOS (bad) and miss out on the joy that is UEFI. I’ve just done the above my self and can confirm it works well. If only Microsoft could make a FAT32 option for USB drives! Windows 8 RTM in UEFI mode is happily installing away on the desktop. Should UEFI setup fail the USB drive should also be bootable in conventional non-UEFI boot (ie BIOS boot.)
Been very frustrating to get to this point, glad to have it sorted, hopefully this will become much easier as motherboard manufacturers enable to boot from UEFI on NTFS and other non Windows Filesystems.
Most would remember the days we had to have a CDROM or DVDROM in order to proceed with the installation of an operating system. Today, it is very common installing an operating system direct from an ISO image. When dealing with virtualized systems, it becomes pretty much a necessity.
This article will show how to install Windows Server 2012 (the same process can be used for almost all other operating systems) from a USB Flash.
The only prerequisite for this process to work is that you have a USB Flash big enough to fit the ISO image and the server (or virtualization platform) supports booting from a USB Flash. If these two requirements are met, then it’s a pretty straight-forward process.
FREE Hyper-V & VMware Virtualization Backup: FREE for Firewall.cx readers for a Limited Time! Download Now!
The Windows 7 USB-DVD Tool
The Windows 7 USB/DVD Tool is a freely distributed application available in our Administrator Utilities download section. The application is required to transfer/copy the ISO Image of the operating system we want to install, to our USB Flash. The application is also able to burn the ISO image directly on a DVD – a very hand feature.
Download a copy, install and run it on the computer where the ISO image is available.
When the tool runs, browse to the path where the ISO image is located. Once selected, click on Next:
At this point, we can choose to copy the image to our USB device (USB Flash) or directly on to a DVD. We select the USB Device option:
In the next screen, we are required to select the correct USB device. If there are more than one USB storage devices connected, extra care must be taken to ensure the correct USB Flash is selected. In case no USB Flash has been connected, insert it now into your USB port and click on the refresh button for it to appear:
After selecting the appropriate USB device, click on Begin Copying to start the transfer of files to the USB Flash:
Once the copy process is complete, we are ready to remove our USB Flash and connect it to our server:
FREE Hyper-V & VMware Virtualization Backup: FREE for Firewall.cx readers for a Limited Time! Download Now!
This completes our article on how to install Windows Server 2012 from USB Flash device. We recommend users visit our Windows 2012 section and browse our growing database of high-quality Windows 2012 and Hyper-V Virtualization articles.
В данной статье пошагово со скриншотами рассмотрим процесс установки Windows Server 2012r2, в зависимости от версии Standard или Datacenter процесс установки не отличается.
Первое, что нам нужно сделать — это скачать сам дистрибутив. Скачать оригинальный дистрибутив Windows Server 2012r2 версий Standard и Datacenter можете в нашем каталоге.
Далее, данный дистрибутив нужно записать на флешку, сделав ее загрузочной. Ознакомиться с инструкцией как это сделать можете на следующей странице.
После загружаемся на загрузочную флешку из под Bios/UEFI и начинаем установку. Первое окно установки будет с выбором языка и пр. языковых настроек.
Нажимаем «Установить».
Далее, при установке у Вас запросят ввести лицензионный ключ активации. Если у Вас нет ключа активации, то приобрести его можете в нашем интернет-магазине, версии Standard и Datacenter, всего лишь от 1390 ₽. Доставка ключа активации на Вашу электронную почту в течении нескольких часов. Ознакомиться со всеми версиями Windows Server в продаже можете в нашем каталоге.
После ввода ключа (в нашем случае автоматически определилось, что ключ был Standard версии), у Вас будет выбор установки. С графическим интерфейсом, или без. Выбираем для удобства «С графическим».
Соглашаемся с лицензионным соглашением.
Далее выбираем пункт «Выборочная установка». Т.к мы устанавливаем с нуля, чистую операционную систему.
Выбираем Ваш целевой жесткий диск, на который будет установлена система. В нашем случае диск один, выбираем его и жмем «Далее».
Ждем завершения копирования файлов и установки. Во время установки, Ваш ПК перезагрузится несколько раз.
После установки у Вас запросят в обязательном порядке придумать Ваш пароль администратора. Вводите его два раза и нажимаете «Готово».
После будет последняя подготовка параметров, которая занимает несколько минут.
На этом все. Теперь можете зайти в меню «Свойства системы» и проверить Вашу ОС. А так же, проверить активирована ли она. Если Вы в начале установки системы ввели Ваш ключ корректно, то все должно пройти успешно.
А так же, после завершения установки рекомендуем сразу найти, загрузить и установить все актуальные обновления для Windows Server 2012r2. Сделать это можете в меню «Панель управления» => Система и безопасность => Центр обновления Windows.
Лицензионный ключ активации Windows Server 2012 от
На чтение 2 мин Просмотров 1к. Опубликовано
Создание загрузочной флешки Windows 7/8.1 и Server 2008R2/2012R2
Удивительное – рядом! Хоть данная заметка не сильно поможет ИТ специалистам в их профессиональном развитии, разве что самым “маленьким”, но тем не менее меня поражает следующий факт. Многие люди используют всякую ерунду и костыли для создания загрузочных флешек. Существует два адекватных способа:
1) Вручную, с помощью стандартной утилиты diskpart. Открываем командную строку – Win+R, выполнить: cmd
diskpart
DISKPART> list disk
DISKPART> select disk 1
Disk 1 is now the selected disk.
DISKPART> clean
DiskPart succeeded in cleaning the disk.
DISKPART> CREATE PARTITION PRIMARY
DiskPart succeeded in creating the specified partition.
DISKPART> SELECT PARTITION 1
Partition 1 is now the selected partition.
DISKPART> ACTIVE
DiskPart marked the current partition as active.
DISKPART> FORMAT FS=NTFS
100 percent completed
DiskPart successfully formatted the volume.
DISKPART> ASSIGN
DiskPart successfully assigned the drive letter or mount point.
DISKPART> exit
Leaving DiskPart…
Далее нужно скопировать файла дистрибутива необходимой ОС Windows на флэшку. Если у вас DVD – просто копируйте содержимое диска в корень флэшки. Если у вас ISO-образ – раскройте его чем-нибудь в корень флэшки (например, winrar’ом). Далее переходим на флэшку (я считаю, что это диск F: – у меня так) и заходим в каталог boot, откуда мы запишем правильный загрузчик на флэшку, чтобы она, собственно, была загрузочной:
C:\Windows\system32>f:
F:\>cd boot
F:\boot>BOOTSECT.EXE/NT60 F:
Target volumes will be updated with BOOTMGR compatible bootcode.F: (\\?\Volume{0c823ba6-3886-11de-9951-001a6b686a1d})
Updated NTFS filesystem bootcode. The update may be unreliable since the
volume could not be locked during the update:
Access is denied.Bootcode was successfully updated on all targeted volumes.
F:\boot>
2) Автоматически, с помощью специализированной программы от Microsoft. Загружаем с официального сайта Windows USB/DVD Download Tool и запускаем:
Вот и все – никаких сторонних/крякнутых/portable версий ПО, только “свое, родное”. Таким образом, создание загрузочной флешки для всех современных версий ОС – Windows 7 / 8 / 8.1 , а также Windows Server 2008/R2 и Windows Server 2012 R2 готово!
Занимаюсь IT с 2007 года. Всё началось с увлечения — разгона компьютерного оборудования. Много воды и азота утекло с тех пор… Сейчас уже более 3х лет со своей командой оказываю комплексную поддержку и продвижение бизнеса: SEO, Яндекс.Директ, рассылки и удалённое обслуживание серверов. Буду рад помочь, обращайтесь!