Если при запуске какой-либо программы, выполнения действия в Windows или при входе в систему вы видите сообщение об ошибке 1068 «Не удалось запустить дочернюю службу или группу», это говорит о том, что по какой-то причине необходимая для выполнения действия служба отключена или не может быть запущена.
В этой инструкции подробно о распространенных вариантах ошибки 1068 (Windows Audio, при подключениях и создании локальной сети и т.п.) и о том, как исправить возникшую проблему, даже если ваш случай не из числа распространенных. Сама же ошибка может появиться в Windows 10, 8 и Windows 7 — то есть во всех последних версиях ОС от Microsoft.
Не удалось запустить дочернюю службу — распространенные варианты ошибки 1068
Для начала о самых часто встречающихся вариантах ошибки и быстрые пути исправить их. Необходимые для исправления действия будут выполняться в управлении службами Windows.
Для того, чтобы открыть «Службы» в Windows 10, 8 и Windows 7, нажмите клавиши Win+R (где Win — клавиша с эмблемой ОС) и введите services.msc после чего нажмите Enter. Откроется окно со списком служб и их состоянием.
Для изменения параметров любой из служб, просто дважды кликните по ней, в следующем окне вы сможете изменить тип запуска (например, включить «Автоматически») и запустить или остановить службу. Если опция «Запустить» не доступна, то сначала нужно изменить тип запуска на «Вручную» или «Автоматически», применить настройки и уже потом запускать службу (но она может не запуститься и в этом случае, если зависима еще от каких-то отключенных в настоящий момент служб).
Если проблема не была решена сразу (или запускать службы не получается), то после изменения типа запуска всех необходимых служб и сохранения настроек попробуйте также перезагрузить компьютер.
Ошибка 1068 службы Windows Audio
Если запустить дочернюю службу не удалось при запуске службы Windows Audio, проверьте состояние следующих служб:
- Питание (тип запуска по умолчанию — Автоматически)
- Планировщик классов мультимедиа (данная служба может отсутствовать в списке, тогда для вашей ОС неприменимо, пропустите).
- Удаленный вызов процедур RPC (по умолчанию — Автоматически).
- Средство построения конечных точек Windows Audio (тип запуска — Автоматически).
После запуска указанных служб и возвращения типа запуска по умолчанию, служба Windows Audio должна перестать выдавать указанную ошибку.
Не удалось запустить дочернюю службу при действиях с сетевыми подключениями
Следующий распространенный вариант — сообщение об ошибке 1068 при каких-либо действиях с сетью: предоставлением общего доступа к сети, настройке домашней группы, подключению к Интернету.
В описываемой ситуации проверьте работу следующих служб:
- Диспетчер подключений Windows (Автоматически)
- Удаленный вызов процедур RPC (Автоматически)
- Служба автонастройки WLAN (Автоматически)
- Автонастройка WWAN (Вручную, для беспроводных подключений и Интернета по мобильной сети).
- Служба шлюза уровня приложения (Вручную)
- Служба сведений о подключенных сетях (Автоматически)
- Диспетчер подключений удаленного доступа (по умолчанию – вручную)
- Диспетчер автоматических подключений удаленного доступа (Вручную)
- Служба SSTP (Вручную)
- Маршрутизация и удаленный доступ (по умолчанию бывает отключена, но попробуйте запустить, может помочь в исправлении ошибки).
- Диспетчер удостоверений сетевых участников (Вручную)
- Протокол PNRP (Вручную)
- Телефония (Вручную)
- Plug and Play (Вручную)
В качестве отдельного действия при неполадках с сетевыми службами при подключении к Интернету (ошибка 1068 и ошибка 711 при непосредственно подключении в Windows 7) можно попробовать следующее:
- Остановите службу «Диспетчера удостоверений сетевых участников» (не меняйте тип запуска).
- В папке C:\ Windows\ serviceProfiles\ LocalService\ AppData\ Roaming\ PeerNetworking удалите файл idstore.sst при его наличии.
После этого перезагрузите компьютер.
Поиск необходимых для исправления ошибки 1068 служб вручную на примере диспетчера печати и брандмауэра
Поскольку все возможные варианты появления ошибки с запуском дочерних служб я предусмотреть не могу, показываю, как можно попробовать самостоятельно исправить ошибку 1068 вручную.
Этот способ должен подойти для большинства случаев появления проблемы в Windows 10 — Windows 7: и для ошибок брандмауэра, Hamachi, диспетчера печати и для других, менее часто встречающихся вариантов.
В сообщение об ошибке 1068 всегда присутствует название службы, вызвавшей эту ошибку. В списке служб Windows найдите это название, после чего кликните по ней правой кнопкой мыши и выберите «Свойства».
После этого перейдите на вкладку «Зависимости». Например, для службы Диспетчер печати мы увидим, что требуется «Удаленный вызов процедур», а для брандмауэра требуется «Служба базовой фильтрации», для которой, в свою очередь, тот же «Удаленный вызов процедур».
Когда необходимые службы стали известны, пробуем включить их. Если тип запуска по умолчанию неизвестен — пробуем «Автоматически» с последующей перезагрузкой компьютера.
Примечание: такие службы, как «Питание» и «Plug and Play» не указываются в зависимостях, но могут быть критичными для работы, всегда обращайте на них внимание при возникновении ошибок запуска служб.
Ну и, если ни один из вариантов не помогает, имеет смысл попробовать точки восстановления (если есть) или другие способы восстановления системы, прежде чем прибегать к переустановке ОС. Тут могут помочь материалы со страницы Восстановление Windows 10 (многие из них подойдут для Windows 7 и 8).
When you attempts to connect your system to a wireless network, if you’re getting the Error 1068: The dependency service or group failed to start error on your Windows computer, it could be super frustrating. Don’t worry. You’re certainly not the only one. We’ve seen many users are reporting this issue. More importantly, you can fix it with the solutions here. Read on and see how…
3 Fixes for Error 1068:
- Restart the WLAN AutoConfig service
- Repair your registry
- Update your network adapter driver
Solution 1: Restart the WLAN AutoConfig service
This error could happen if the WLAN AutoConfig service isn’t correctly configured on your computer. In this case, you can try to restart the service to solve your problem.
See how to do it:
-
On your keyboard, hold down the Windows logo key and press R to bring up the Run box.
-
Type services.msc, then press Enter.
-
Right-click on WLAN AutoConfig to select Restart. If the Restart option grayed out, click Start instead.
-
Double-click WLAN AutoConfig.
-
Set the Startup type to Automatic. Then Apply > OK.
Reboot your Windows computer and the error should disappear. If you’re prompted the error again, there’re something else you can try…
Solution 2: Repair your registry
When your system settings are not configured properly, this error may also occur. You can solve it through repairing your registry.
Here’s how you can do it:
-
On your keyboard, hold down the Windows logo key and press R to bring up the Run box.
-
Type regedit, then press Enter.
-
Click Yes when prompted by User Account Control.
-
Go to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services.
-
Right-click Dhcp under the Services section to select Export.
Give a name for the backup file, say Dhcp backup. Then select a backup address and click Save. You can restore the file from this backup if any error occurs during the process below.
-
Double-click DependOnService on the right pane of Dhcp. Select all the words except “Afd”, then delete them.
-
Right-click Eaphost under the Services section to select Export.
Give a name for the backup file, say Eaphost backup.Then select a backup address and click Save.
-
Double-click DependOnService on the right pane of Eaphost. Select all the words and delete them.
Close the Registry Editor window and reboot your Windows computer. Check if the error disappears. If you still see the error, don’t give up hope. Simply move onto next solution.
Solution 3: Update your network adapter driver
This problem could be also due to a corrupted, old or missing network driver on your system. So you can solve it through updating your network driver.
Updating drivers require Internet connection on your computer. If your computer can’t access the wireless network, try to connect your computer to a wired network connection or, you can try the Offline Scan feature of Driver Easy.
You can update your network driver either manually or automatically.
Manual driver update
You can update your network driver manually by going to the manufacturer’s website for your network adapter, say, Realtek, and searching for the most recent correct driver. Be sure to choose only drivers that are compatible with your Windows version.
Automatic driver update
If you don’t have the time, patience or computer skills to update your network driver manually, you can, instead, do it automatically with Driver Easy. Driver Easy will automatically recognize your system and find the correct driver for your exact network adapter, and your Windows version, and it will download and install them correctly.
You can click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system. (This requires the Pro version which comes with full support and a 30-day money back guarantee. You’ll be prompted to upgrade when you click Update All.)
You’re done. Feel free to comment below if you have any question.
27
27 people found this helpful
Applies ToMicrosoft Windows XP Professional Microsoft Windows XP Home Edition
Symptoms
When you run the Internet Connection Sharing Wizard, you may receive one of the following error messages:
An error occurred while Internet Connection Sharing was being enabled. The dependency service or group failed to start.
-or-
1068: Dependency service or group failed to start.
Resolution
To have us fix this problem for you, go to the «Here’s an easy fix» section. If you prefer to fix this problem manually, go to the «Let me fix it myself» section.
Here’s an easy fix
To fix this problem automatically, click the Download button. In the File Download dialog box, click Run or Open, and then follow the steps in the easy fix wizard.
-
This wizard may be in English only. However, the automatic fix also works for other language versions of Windows.
-
If you’re not on the computer that has the problem, save the easy fix solution to a flash drive or a CD, and then run it on the computer that has the problem.
Let me fix it myself
Easy fix 50562
To resolve this issue, make sure that all dependent services have been started. To do this, follow these steps:
-
Click Start, and then click Help and Support.
-
Under Pick a Task, click Use Tools to view your computer information and diagnose problems.
-
In the Tools area, click System Configuration Utility.
-
In the right pane, click Open System Configuration Utility. This opens the System Configuration Utility.
-
Click the Services tab.
-
Make sure all the following services are turned on. To turn on a service, click to select the check box.
-
Application Layer Gateway Service
-
Network Connections
-
Network Location Awareness (NLA)
-
Plug and Play
-
Remote Access Auto Connection Manager
-
Remote Access Connection Manager
-
Remote Procedure Call (RPC)
-
Telephony
-
-
Click OK, and then clickRestart.
-
After Windows restarts, rerun the Internet Connection Sharing Wizard.
References
For additional information about this issue, click the following article number to view the article in the Microsoft Knowledge Base:
241584 Service Does Not Start and Displays «Error 1058»
Did this fix the problem?
Check whether the problem is fixed. If the problem is fixed, you are finished with this section. If the problem is not fixed, you can contact support.
Need more help?
Want more options?
Explore subscription benefits, browse training courses, learn how to secure your device, and more.
The pop-up of the Peer Networking Error 1068, as an annoying being, obstructs you from sharing your important files. Usually, the error message shows up when the HomeGroup feature is not working completely. If you also struggle with a similar issue, please refer to this article on MiniTool Website.
The Peer Networking Error 1068
The Peer Networking Error 1068 that usually shows up means Windows could not start the Peer Networking Grouping service on the Local Computer along with Error 1068.
When you are using the HomeGroup feature that enabled multi-party communication using peer-to-peer grouping, your Peer Networking service may fail to run well. At this moment you can see the Peer Networking Grouping Error Code 1068 appears to require you to fix the wrongs.
In such a case, this article will guide you to learn some fixes for the Peer Networking Error 1068. Among them, one will be your tailored solution.
Fixes for the Peer Networking Error 1068
Fix 1: Disable Antivirus Temporarily
Sometimes, aggressive antivirus programs may obstruct file-sharing to prevent viruses from sneaking into computers. Therefore, you can try to disable antivirus programs for a while.
It is recommended to start the antivirus again after finishing your file sharing.
Step 1: Go to Update & Security in Settings and click Windows Security, then Virus & threat protection.
Step 2: Switch to Virus & threat protection settings and click Manage settings.
Step 3: Turn the Real-time protection option off
If you have other third-party antivirus programs, you also need to disable or uninstall them for the moment. After the issue is resolved, you can reinstall or re-enable it.
Fix 2: Update Your Windows
An outdated Windows can be the potential culprit when you find the Peer Networking Error 1068. And Windows updates can fix some faults of the old version, so you can try to update your Windows.
Step 1: Go to Update & Security in Settings.
Step 2: In Windows update, if there is any available version waiting to update, please download and install it.
Fix 3: Check If the Peer Networking Services Are Running
When Peer Networking Grouping Error Code 1068 appears, you can check if the Peer Networking services are running.
Step 1: Open the Run box by pressing Win + R and input services.msc to enter.
Step 2: Right-click each service as following listed and choose Enable from the menu.
- Peer Name Resolution Protocol
- Peer Networking Identity Manager
- Peer Networking Grouping
- PNRP Machine Name Publication
After that, please retry your file-sharing.
Fix 4: Remove All Files from the MachineKeys Directory
The Peer Networking Error 1068 may be caused by a variety of reasons. Some users succeed to get rid of the Peer Networking Error 1068 by removing all files from the MachineKeys Directory. Let’s try this way.
Step 1: Open your File Explorer and locate the MachineKeys based on the following route.
C: > ProgramData > Microsoft > Crypto > RSA > MachineKeys
Step 2: Remove all available files in this directory. You’d better back up your files in case the data loss. Then restart your PC.
Fix 5: Change MachineKeys Folder Security Permission
If the issue persists, please change MachineKeys folder security permission to see if the Peer Networking Grouping Error Code 1068 can be removed.
Step 1: Locate the MachineKeys folder as we mentioned in fix 4.
Step 2: Right-click it and choose Properties.
Step 3: Switch to the Security tab and click Edit….
Step 4: Select Everyone and check the Allow box beside the Full control. Then click Apply and OK to save changes.
Now, you can try your file-sharing with Peer Networking.
Fix 6: Run Homegroup Troubleshooter
Here, you can issue a command in Windows PowerShell to fix the Peer Networking Error 1068.
Step 1: Type PowerShell in the search box and open it as an administrator.
Step 2: Input the command: PowerShell Get-NetConnectionProfile
Once the command runs successfully, you can restart your PC and check the fault.
Fix 7: Change Peer Name Resolution Protocol Settings
You can change a couple of settings in the Services window to see if the peer networking group service run well.
Step 1: Open your Services window and locate the Peer Name Resolution Protocol.
Step 2: Double-click it and switch to the Log On tab.
Step 3: Check the Local System account and click Apply and OK to save changes.
Restart your PC and check if the issue persists.
Bottom Line:
With the help of those measures above, you can troubleshoot your problem and successfully share your files with Peer Networking. Come and give it a shot!
,
If your desktop or laptop PC has no sound output, keep reading below to fix the problem. This tutorial contains instructions to troubleshoot sound issues a Windows 10, 8 or 7 based computer, with one of the following symptoms/errors:
- No Audio output
- Volume icon is missing
- Audio Service fails to start.
- Windows could not start the Windows Audio service on Local Computer. Error 1068: «The dependency service or group failed to start.
- AudioEndPointBuilder service fails to start. Error 126: The specified module could not be found».
How to fix Sound problems on a Windows Computer.
Suggestions: Before proceeding to the steps below to troubleshoot the sound problem(s), try the following:
- Restart your PC.
- If you see the Volume icon in the taskbar, click on it and adjust the volume (drag the slider up).
- If you don’t see the Volume icon on the Taskbar, go to: Taskbar Settings (Properties) > Notification area > click Select which icons appear on the taskbar (Customize) and make sure that the Volume icon notification is ON (Show icons and notifications). If it is already ON, then proceed to to the steps below:
Step 1. Perform a System Restore. *
If you have recently installed a Windows Update, a program or a device driver on your computer, then try first to restore your system to a previous working state:
* Note: Apply this step, only if you recently updated your PC, otherwise go to step-2.
1. Simultaneously press the Windows + R keys to open run command box.
2. In run command box, type: rstrui press Enter.
3. At the first screen press Next and at the next screen select a previous restore point and click Next again.
5. At the last screen, click Finish and then wait until System Restore process is completed.
6. When the restore is completed check if the sound problem is fixed.
Step 2. Enable Required Audio Services.
The next step in order to resolve sound problems in Windows, is to verify that the following services are running:
-
- DCOM Server Process Launcher
- Multimedia Class Scheduler *
- Power
- Plug and Play
- Remote Procedure Call (RPC)
- RPC Endpoint Mapper
- Windows Audio
- Windows Audio Endpoint Builder
* Note: Ignore the ‘Multimedia Class Scheduler’ service if you own Windows 10 v1803 or v1809, because it doesn’t exist in these versions of Windows 10.
To view if the above services are running:
1. Simultaneously press the Windows + R keys to open run command box.
2. In run command box, type: services.msc and press Enter.
3. Locate one by one all the above mentioned services and see if their status is «Ruining»
4. If you find a service that is not running, then, right click on it, and choose Properties.
5. Set the Startup type to Automatic and click OK.
6. Perform the same procedure for all the mentioned services.
7. When done, restart the PC and check if the sound problem is solved. If not, make sure that all above mentioned services are running. If one (or more) of the above mentioned services are not running, then right click on the service and select Start. *
* Note: If you receive an error when you try to start a service, then continue to the next step.
Step 3: Run the System File Checker (SFC) tool.
The next step to resolve Audio problems, is to run the System File Checker tool to repair missing or corrupted system files.
1. Open command prompt as administrator. To do that:
1. In the Search box type: cmd or command prompt
2. Right click on the command prompt (result) and select Run as Administrator.
2. At the command prompt window, type the following command & press Enter: *
- Dism.exe /Online /Cleanup-Image /Restorehealth
* Note: If you ‘re using Windows 7, Vista or Server 2008, then skip this command and download & run the System Update Readiness Tool (package) from here first, and then proceed below.
3. Be patient until DISM repairs component store. When the operation is completed, (you should be informed that the component store corruption was repaired), give this command and press Enter:
- SFC /SCANNOW
4. When the SFC scan is completed, restart your computer. *
* Note: If SFC cannot repair the system files with error «Windows Resource Protection found corrupt files but was unable to fix some of them» then follow the instructions in this article to fix the issue.
5. After restart check if the audio problem is resolved.
Step 4: Uninstall & Re-Install Audio Device.
The next step to resolve sound problems, is to uninstall and re-install the audio device from the system. To do that:
1. Simultaneously press the Windows + R keys to open run command box.
2. In run command box, type: devmgmt.msc and press Enter to open Device Manager.
3. In Device Manager, expand Sound video and game controllers.
4. Right click on the installed Audio Device and select Uninstall device.
5. Then click Uninstall (OK) and restart your computer. *
* Note: Do not check the ‘Delete the drive software for this device’ box.
6. After restart Windows will re-install automatically again the Audio device.
7. After installation, test the sound. If the problem persists, then:
1. Navigate to your PC manufacturer support site and download the latest driver for the Audio device.
2. Then navigate again to Device Manager and Uninstall the audio device, but this time check to also Delete the driver software for the device.
3. Finally proceed and install the latest audio driver you downloaded.
Step 5. Repair Windows.
If everything else fails, the final step to resolve the audio problem, is to backup your files and to clean install Windows, or, to Repair Windows 10 with an in-place Upgrade.
That’s it! Let me know if this guide has helped you by leaving your comment about your experience. Please like and share this guide to help others.
If this article was useful for you, please consider supporting us by making a donation. Even $1 can a make a huge difference for us in our effort to continue to help others while keeping this site free:
- Author
- Recent Posts
Konstantinos is the founder and administrator of Wintips.org. Since 1995 he works and provides IT support as a computer and network expert to individuals and large companies. He is specialized in solving problems related to Windows or other Microsoft products (Windows Server, Office, Microsoft 365, etc.).