Net send windows 10 msg - Windowsa.top - ваш верный помощник с OS Windows

Microsoft Windows provides an effortless method for sending messages to other computers on the local network, called Net Send. In this article we will show you how to make the most of this feature.

How to send a message to another PC on a local network?

If you wish to send a message to another computer in your network, follow these steps:

Start command prompt (cmd) – type cmd in the searchbox and run the app
Type the following command as:

msg /SERVER:DestinationPC * /TIME:60 “This is the message to be sent to a PC named DestinationPC and closes in 60 seconds."

You will need to replace DestinationPC with the name of the desired PC (you can find this in the list of computers that are currently sharing your network, if you don’t already know the PC name).
Now, replace the value for TIME with how long you want the message to appear on the other screen for. For example TIME:30 for 30seconds
Then replace the text between the quotation marks and the message you want to send.
Finally, you can hit enter, and the message will be sent.

How to use Net send to send messages?

Here is the first alternative way of sending messages that may work if you have an older version of Windows. Here’s how:

Click Start > Run.
Type cmd, and press Enter
In the window that opens, type Net send followed by the computer’s name to which you wish to send the message.
Next, enter the message. For example, the format should resemble «Net send PC01 can you read this message?»

How to send messages with cmd prompt?

It is easy to send messages through cmd prompt to other systems here is the answer first we have to set our systems messenger ACTIVE. For it, follow these steps:

1. Go to RUN
2. Type
```
services.msc
```
3. Scroll down and right click on MESSENGER
4. Select PROPERTIES
5. Then for enabling it go to STARTUP TYPE and select AUTOMATIC
6. Then OK

And this should be performed on both sides (SENDER & RECEIVER). After that if you want to send message then do the following steps:

1. Go to cmd prompt

2. Type syntax as follows:

 net send <ipaddress of reciever>  <message to be send>

Ex:

net send 172.16.6.99 "hello"

How to fix Error 5, Error 1825

When using the msg command, the following error may occur: Error 5 when getting session names or Error 1825 when getting session names.

These error messages indicate a failure in the connection to the recipient of the message. To correct these errors, you need to act on the side of the recipient. Run the command regedit to open the registry editor on the recipient’s computer and navigate to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server

Here change AllowRemoteRPC from 0 to 1.

Alternative solution

Run as Administrator: If you’re getting this error while running an application or command, try running it as an administrator. Right-click on the program and select «Run as Administrator.»
Check Permissions: Ensure the account you’re using has adequate permissions for the action you’re trying to perform. You might need administrative access.
Antivirus or Security Software: Sometimes, antivirus software can restrict access. Temporarily disabling it might help identify if that’s the issue.

Do you need more help with Windows? Check out our forum!

Источник

The net send command is a Command Prompt command used to send messages to users, computers, and messaging aliases on the network. It’s one of many net commands.

Net Send Command Availability

The net send command is available from within the Command Prompt in Windows XP, as well as in older versions of Windows and in some Windows Server operating systems.

Windows XP was the last version of Windows to include the net send command, so it’s not available in Windows 11, Windows 10, Windows 8, Windows 7, or Windows Vista. Instead, the msg command replaces the net send command in those versions of Windows.

The availability of certain net send command switches and other net send command syntax may differ from operating system to operating system.

Net Send Command Syntax

net send {name | * | /domain[:domainname] | /users} message [/help] [/?]

See How to Read Command Syntax if you’re not sure how to read the command syntax as it’s written above or shown in the table below.

Net Send Command Options
Item	Explanation
name	This option specifies the username, computer name, or messaging name (defined with the net name command) that you want to send the message to.
*	Use the asterisk to send the message to every user in your current domain or workgroup.
/domain	This switch can be used alone to send the message to all the names in the current domain.
domainname	Use this option with /domain to send the message to all the users in the specified domainname.
/users	This option sends the message to all the users connected to the server that the net send command is being executed from.
message	This net send command option is obviously required and specifies the exact text of the message you’re sending. The message can be a maximum of 128 characters and must be wrapped in double quotes if it contains a slash.
/help	Use this switch to display detailed information about the net send command. Using this option is the same as using the net help command with net send: net help send.
/?	The help switch also works with the net send command but only displays the basic command syntax. Executing net send without options is equal to using the /? switch.

You can store the output of the net send command in a file using a redirection operator with the command.

Net Send Command Examples

Here are some examples that show how to use the net send command:

Send to All Workgroup Users

 net send * Please proceed to CR103 immediately for a mandatory meeting

In this example, net send is used to send the Please proceed to CR103 immediately for a mandatory meeting message to all the members * of the current workgroup or domain.

Send to All Server Users

 net send /users "Will the person with the A7/3 client file open please save your work and close it? Thank you!"

Here, the command is used to send all the members of the current server /users the message Will the person with the A7/3 client file open please save your work and close it? Thank you!. The message is in quotes because a slash was used.

Send to All Users in Specific Domain

 net send /domain:abcd This is just a tornado drill

Net send is used in this example to message all users in the abcd domain that This is just a tornado drill.

Send to Specific User

 net send smithm You're Fired!

While it’s a completely unprofessional way to terminate someone’s employment, in this example, the net send command is used to send the user smithm a message he probably didn’t want to hear: You’re Fired!.

Net Send Related Commands

The net send command is a subset of the net command and so is similar to its sister commands like net use, net time, net user, net view, etc.

More Help With the Net Send Command

If this command isn’t working, you might see the following error in Command Prompt:

 'net' is not recognized as an internal or external command, operable program or batch file.

There are two ways to fix this, but only one is a permanent solution…

You can move the current working directory to be System32, the path where the cmd.exe file is located, so that Command Prompt knows how to run the command. Do this with the cd (change directory) command:

 cd c:\windows\system32\

From there, you can run the command without seeing that error. However, this is only a temporary solution that you’ll have to do all the time for every command. The real problem is that the current environment variable hasn’t been set up correctly.

Here’s how to restore the proper environment variable necessary for Command Prompt to understand your commands in Windows XP:

Open the Start menu and right-click My Computer.
Choose Properties.
Select the Environment Variables button from the Advanced tab.
Select Path from the list of variables in the System Variables section.
Choose Edit below the System Variables section.
In the Variable value text box, look for any paths that read exactly like this:
```
 C:\Windows\system32
```
or…
```
 %SystemRoot%\system32
```
You should only have one in there, but if you have neither, then go to the very end of the text, type a semicolon, and then enter the top path from above, like this:
```
 ;C:\Windows\system32
```
Is one already in there? If so, it’s most likely the second one that reads «%SystemRoot%» at the beginning. If so, change that part of the path to be «C:\Windows\system32» (so long as your Windows installation is on the C: drive, which is most likely true).

For example, you’d change %SystemRoot%\system32 to C:\Windows\system32.

If it helps, copy all the text into Notepad and do the editing there. When you’re done, just paste the edited variable value back into that text box to overwrite the existing text.

Don’t edit any other variables. If there happens to be no variables in this text box, then you can enter the above path without the semicolon since it’s the only entry.
Select OK a few times to save the changes and exit the System Properties window.
Restart your computer.

If net send commands appear to work in Command Prompt with a «successful» message, but the pop-up doesn’t show up on the computers the message is sent to, check that the receiving computers have the Messenger service enabled.

To enable this service in Windows XP, go to Start > Run, enter services.msc, double-click Messenger, change Startup type to Automatic, and then go to Apply > Start.

You can also enable the Messenger service from the command line:

 sc config messenger start=auto
net start messenger

Thanks for letting us know!

Get the Latest Tech News Delivered Every Day

Источник

The net send command is a Command Prompt command used to send messages to users, computers, and messaging aliases on the network. Windows XP was the last version of Windows to include the net send command. The msg command replaces the net send command in Windows 11, Windows 10, Windows 8, Windows 7, and Windows Vista.

How use net send in cmd?
What is the net send command?
How do I net send in Windows 10?
Does net send still work?
How do you show messages in cmd?
How do I enable net send on Windows 7?
What does net view command do?
How do I enable net send?
What is Session name in MSG command?
Can I send a message to an IP address?
Does Windows 10 have net send?
How do I send messages to another computer using PowerShell?

How use net send in cmd?

To send NET SEND messages, you need to open a Command Prompt and use the NET command with send parameter. Go to the Start menu, click Run, type cmd, and hit ENTER. Type NET SEND and specify the name of a user or a computer name followed by the message text.

What is the net send command?

Net Send is a command within the Microsoft Windows XP Professional operating system’s Messenger Service. Net Send allows messages to be sent to network computers, users and messaging names. MSG.exe replaced Net Send, as Messenger Service is not supported by Windows Vista and Windows Server 2008.

How do I net send in Windows 10?

Method 1 of 2:

You can use the net send command to send messages to other computers on your network. The command is used through the Command Prompt. You can open the Command Prompt from the Start menu or by pressing ⊞ Win + R and typing «cmd». If you are using Windows Vista, 7, 8, 8.1, or 10, see the next section.

Does net send still work?

Now, netsend doesn’t exist apparently and net doesn’t contain the param send .

How do you show messages in cmd?

To display a message that is several lines long without displaying any commands, you can include several echo <message> commands after the echo off command in your batch program. After echo is turned off, the command prompt doesn’t appear in the Command Prompt window. To display the command prompt, type echo on.

How do I enable net send on Windows 7?

Click the Windows logo in the taskbar to open the startmenu. Once in there, type «CMD» in the search box, and then push Enter . Now once in the command prompt or CMD window. Type in «MSG» and push Enter you will now see a list of commands which you can use for this command.

What does net view command do?

Displays a list of domains, computers, or resources that are being shared by the specified computer. Used without parameters, net view displays a list of computers in your current domain.

How do I enable net send?

Click the plus sign next to Services and Applications, and then click Services. Double-click “Messenger“. Click the “General” tab and select “Automatic” from the Startup type list, and then click “Apply“. Under Service status, click “Start“, and click “OK“.

What is Session name in MSG command?

Msg Command Syntax

Specify sessionname to send a message to a specific session. sessionid. The sessionid option can be used to send a message to a session using the session’s ID. @filename. Use the @filename option to send a message to the user names, session names, and session ID’s listed in the specified file.

Can I send a message to an IP address?

1 Answer. The answer is No. You would have to send that through an open port on the recipients PC which a firewall would surely block (Windows Firewall, router, etc..). Even if it didn’t get blocked — you’d need something to turn your message from zeros and ones to text — and display it on the users monitor.

Does Windows 10 have net send?

The net send command is a Command Prompt command used to send messages to users, computers, and messaging aliases on the network. … The msg command replaces the net send command in Windows 11, Windows 10, Windows 8, Windows 7, and Windows Vista. The net send command is one of many net commands.

How do I send messages to another computer using PowerShell?

Message :- Type your message which you want to send to the computers. Like Hi, “Hello, Update are being installed on your computer, pleas wait” Etc. Computer Name: – Type the computer name to which you want to send the message, if you type PC1, it will send message to PC1 computer.

Источник

The `net send` command is used to send messages to other users or computers on a local network through the Messenger service, though it is largely obsolete in modern systems.

net send [computername] "Your message here"

Understanding the CMD Command Line

CMD, short for Command Prompt, is a command line interpreter available in Windows operating systems. It allows users to interact with the OS and execute commands through written input rather than graphical interfaces. Mastering command line tools is crucial for enhancing productivity, especially for systems administration, troubleshooting, and automation.

The command line syntax is generally structured as follows:

command [options] [parameters]

Understanding this structure is vital for successfully using any command, including `cmd net send`.

Mastering Cmd Net Share for Quick File Sharing

Setting Up Net Send

Prerequisites for using Net Send

Before diving into the `cmd net send` command, it’s essential to note the required conditions for its successful implementation. The Net Send command primarily operates on earlier versions of Windows, such as Windows XP and Windows 2000. In recent versions, this functionality has been replaced by alternate methods due to security concerns.

Ensure that your local area network (LAN) is correctly set up. All machines must be on the same network domain or workgroup for messages to be sent effectively.

Enabling Messenger Service

The messenger service must be enabled to utilize `cmd net send` signal effectively. To enable it, follow these steps:

Open the Control Panel.
Navigate to Administrative Tools > Services.
Locate Messenger, right-click, and select Start.

Important Note: Be aware that in many modern Windows systems, the Messenger service is either disabled by default or has been removed altogether. Always verify your service settings and consult your IT department if applicable.

Mastering Cmd Net Start for Quick Service Management

Syntax of the Net Send Command

The basic syntax for the `cmd net send` command is as follows:

net send [computer name | * | /DOM:domainname] message

Key components of this command include:

computer name: Specify the target recipient’s hostname or IP address. This directs the message to a specific machine on the network.
** * (asterisk)**: By using the asterisk, you broadcast your message to all users on the network simultaneously.
/DOM:domainname: This option allows messages to reach a specific domain, making it useful for large organizational networks where you want to target a particular group.

Master Cmd Net User Commands for Quick User Management

Crafting Your Message

Format of the Message

When composing your message, clarity is vital. An effectively crafted message must be concise and straightforward to ensure your target audience understands it without confusion. It is advisable to keep your messages direct and to the point, avoiding unnecessary technical jargon.

Be cautious of character limits; while some interfaces may allow longer messages, others might truncate information, potentially altering your intended meaning.

Examples of Effective Messages

Here are a few scenarios illustrating the utility of `cmd net send`:

Urgent Announcements:

net send Team "Important: All hands meeting at 3 PM in the conference room!"

Friendly Reminders:

net send ItDept "Reminder: Submit your monthly reports by Friday."

These examples demonstrate how `cmd net send` can be applied to different contexts, ensuring your information is communicated efficiently.

Example of a Simple Net Send Command

A straightforward command to send a message to everyone on the network would look like this:

net send Everyone "Meeting starts in 10 minutes"

In this command, «Everyone» denotes the target audience. The message «Meeting starts in 10 minutes» is delivered to all users.

Mastering Cmd Net View: A Quick Guide to Network Discovery

Advanced Usage of Net Send

Sending Messages to Multiple Users

You can send a message to multiple users simultaneously by specifying each recipient’s name in a comma-separated format. For example:

net send user1,user2,user3 "Server maintenance scheduled tonight"

In this case, the message will be sent to `user1`, `user2`, and `user3`, ensuring that all relevant parties are informed.

Using Wildcards in Net Send

Wildcards enhance your command’s flexibility. If you want to broadcast a message to all users in a group, you can easily utilize the asterisk. For instance:

net send * "System update will commence shortly. Please save your work."

This command effectively broadcasts the message to all users connected to the network, ensuring maximum visibility.

Master Cmd Net Group Commands Efficiently

Troubleshooting Common Issues

Problem: Net Send Not Working

If you find that the `cmd net send` command is not functioning as expected, consider the following troubleshooting steps:

Service Availability: Ensure that the Messenger service is running on your machine and the target machines.
Command Accuracy: Verify that you are using the correct syntax and recipient names.

Firewall and Security Settings

Windows Firewall or other security settings might block the messenger service. To allow messages, navigate to your firewall settings and permit traffic for the messenger service. You may need administrative privileges to make these changes.

Network Connectivity Issues

Ensure that all machines participating in the `cmd net send` communications are connected to the same network. Misconfigured network settings can lead to failed message delivery.

Mastering Cmd Net Time: A Quick Guide to Synchronization

Alternatives to Net Send

With the removal of the Messenger service in newer versions of Windows, users should explore alternative messaging methods:

MSG Command: This command serves as a modern substitute for `net send`, still utilizing the command line effectively. The syntax is as simple as:
```
msg username "This is a message"
```
Third-Party Messaging Tools: Applications such as Slack, Microsoft Teams, or even group messaging apps provide modern, enhanced functionalities for team communication and might be worth exploring.

Cmd Net User Change Password: A Quick Guide

Conclusion

In conclusion, mastering the `cmd net send` command can significantly enhance your abilities to communicate across a network efficiently. Understanding its setup, syntax, and practical applications will allow you to utilize this command to its fullest potential.

Always stay informed about modern alternatives and tools to make the most of your communication needs within a Windows environment.

Cmd Fix Windows: Quick Solutions for Common Issues

Additional Resources

For further reading on CMD commands, consider exploring online documentation, tutorials, and forums dedicated to command line enthusiasts.

Mastering Cmd Network Reset: Quick Guide for Users

Call to Action

Join our community! Sign up for our newsletter to receive more tips, tricks, and tutorials on CMD usage. Don’t forget to leave your experiences in the comments section regarding the `cmd net send` command and share your insights with fellow learners!

Источник

When you have computers connected over a network, it is possible to send a message to them without using any software. The process works in a similar way to how data is sent from one computer to another. Windows offers MSG or messaging tool which operates from the Command Prompt. In this post, we will discuss how you can send message to an IP address or user from the Command Prompt.

MSG Command Syntax to Send Message to IP or User

MSG {username | sessionname | sessionid | @filename | *}
/SERVER:servername /TIME:seconds /V /W [message]

username Identifies the specified username.
sessionname The name of the session.
sessionid The ID of the session.
@filename Identifies a file containing a list of usernames,
sessionnames, and sessionids to send the message to.
* Send a message to all sessions on the specified server.
/SERVER:servername server to contact (default is current).
/TIME: seconds Time delay to wait for the receiver to acknowledge msg.
/V Display information about actions being performed.
/W Wait for a response from the user, useful with /V.
message: Message to send. If none specified, prompts for it or reads from stdin.

How to send a message to an IP address or a Windows 11/10 PC from Command Prompt

MSG command helps you to send a message to a specific user on a particular computer. If you are an admin, you can use the command syntax to figure out the exact username.</

Open Command Prompt with admin privileges. (Type CMD in the search and launch it with admin permissions)
Make sure to keep the username, server name, etc. are with you.
Type MSG <username> or msg * /server:computername message and press the Enter key
It will let you type any number of the message unless you hit control + z
Once you type the message, press the Enter key, and it will send the message.

The message should be received on the other side if messaging services are set up in the form of a pop-up window. The user, on the other side, can also use the same method to send a message.

Earlier to Windows 11/10, it was possible to use the NET command to send messages to a particular IP address, but it has been deprecated.

How Can I Find the IP Address of Another Computer?

Open Windows Terminal by making a right-click on the Start menu and then clicking on it
Type nslookup and the domain name of the computer
It will reveal the IP address instantly.

How to send multiple line messages to another Windows PC?

First, write the message in a text file, and save it. Make sure to note the location.
Open Windows Terminal, and execute the command.

type \fullpath\multiplelinemessages.txt | msg * /server:computername

It will open the pop-up window, and the message will be displayed as you wrote it.

How Do I Send Messages to Another Computer Using PowerShell?

You can use the following script:

$name = read-host "Enter computer name "
$msg = read-host "Enter your message "
Invoke-WmiMethod -Path Win32_Process -Name Create -ArgumentList "msg * $msg" -ComputerName $name

I hope the post was easy to follow, and you are now able to secretly send the message to computers on your network or send a message to IP addresses or a User.

Источник