Cisco Packet Tracer также можно использовать для моделирования беспроводных сетей, сетей IP-телефонии (VoIP) и многих других.
Если вы стремитесь к сертификации Cisco, такой как CCENT, CCNA и другие, то вы можете использовать Cisco Packet Tracer для настройки сетевых устройств Cisco, таких как коммутаторы и маршрутизаторы, с помощью команд Cisco IOS.
Скачать и установить Cisco Packet Tracer
Вы можете официально скачать и использовать Cisco Packet Tracer бесплатно. Вам нужна учетная запись Cisco Network Academy для загрузки и использования Cisco Packet Tracer. Вы можете создать учетную запись Cisco Network Academy бесплатно.
В Packet Tracer 7 добавлена функция аутентификации пользователей. Пользователь Сетевой академии должен выполнить вход при первом запуске Packet Tracer.
Пользователи без учетной записи Сетевой академии смогут сохранять топологии не более трех раз.
Пользователь без учетной записи Сетевой академии может нажать кнопку гостевого входа, чтобы записаться на бесплатный курс для самостоятельного изучения «Введение в Packet Tracer» и получить учетную запись netacad.com для полного доступа к Packet Tracer. Курс «Введение в Packet Tracer» поможет вам ознакомиться с основными функциями Packet Tracer.
Чтобы создать учетную запись Cisco Network Academy, перейдите на страницу https://www.netacad.com/ru/courses/packet-tracer/introduction-packet-tracer из любого веб-браузера по вашему выбору, и вы должны увидеть следующую страницу. Теперь нажмите Зарегистрируйтесь уже сегодня!, чтобы загрузить Packet Tracer.
В выпадающем меню нужно нажать кнопку English. Должна открыться страница регистрации. Заполните данные и нажмите Отправить, как показано на скриншоте ниже.
После того как вы зарегистрировались и подтвердили свою учетную запись, перейдите по адресу https://www.netacad.com/, и вы должны увидеть следующую страницу. Нажмите Log In -> Login, как видно на скриншоте ниже.
После того как вы зашли, нужно нажать в верхнем меню Resource -> Download Packet Tracer.
На этой странице в разделе Downloads нужно выбрать и скачать необходимую версию — для Windows, Linux, MacOS, Android или iOS.
Устанавливаем и запускаем. При первом запуске мы увидим окно где нужно еще раз залогиниться под учетной записью netacad. Чтобы войти без учетной записи нужно нажать кнопку Guest Login в правом нижнем углу и подождать окончания таймера, после чего нажать кнопку Confirm Guest.
Готово! Теперь можно начинать работать!
Cisco released the latest version of network simulator software 7.2.2 for its users on September 11, 2019. You can download this new version for both Windows and Linux systems from the Download section by logging into Netacad.
The 7.2.2 version of Packet Tracer is the 2nd maintenance release for 7.2 and the build number is 7.2.2.0418. You can easily update/upgrade the PT installed on your computer to the new version.
The most striking feature of Packet Tracer 7.2 is its new visual theme. In this version, you can review after the installation that new workspace, enhancements and new devices have been added.
System requirements
Minimum requirement
- Processor: Intel Pentium 4, 2.53 GHz or equivalent
- Operating System: Microsoft Windows 7, Microsoft Windows 8.1, Microsoft Windows 10 or Ubuntu 16.04 LTS
- RAM: 2GB
- Storage: 1.4 GB of free disk space
- Screen Resolution: 1024 x 768
- Language fonts that support Unicode encoding
- Latest video card drivers and operating system updates
After explaining the minimum system requirements of Packet Tracer, let’s examine its installation step by step.
Using Cisco Network Simulator in Windows 10
Before proceeding with the installation steps, download the PT for your Windows computer by clicking here. Then follow the instructions below for step-by-step installation in order.
Click the Right Button on the Cisco PT setup file that you downloaded to your computer and click on the “Run as Administrator” option from the opened options.
When the Windows 10 file security warning window opens, click the “Run” button to run the setup file.
In the PT license agreement window, select the I accept the agreement option to accept the license and click the “Next” button.
In the “Select Destination Location” window, if you want to change the location you want to install, you can choose a different location by clicking the Browse button.
Click “Next” directly to continue with the location the Wizard has chosen by default.
In the “Select Start Menu Folder” window, you can change the name of the folder for the start menu after installation, as the name suggests. Leave the default option here and continue with the installation.
In the “Select Additional Tasks” window, you can create a desktop shortcut and a quick launch shortcut for Packet Tracer on your computer.
In this step, you can continue by simply creating a desktop shortcut.
In the “Ready to Install” window, you can review the configurations required to install Packet Tracer from the image below. If you want to make a change, you can go back to the previous steps.
Click the “Install” button to start copying the files directly.
Wait while the files required for PT 64 Bit are copied to your system. This process will be completed in a few minutes.
After the necessary files have been copied, you will see a warning window asking you to restart your computer so that you can use PTSA (Packet Tracer Skills Based Assessment). Click the “OK” button in the Setup Info window.
After completing the CPT Setup Wizard, click the “Finish” button to run the simulator.
Wait while the Cisco network simulator opens.
In this step, when you encounter the Cisco login screen, you can log in to the remote server by typing your Netacad account information. Otherwise, if you don’t have a Netacad account, just click on the Guest Login button to run the program.
After clicking the Guest Login button, a 15-second timer will start, and at the end of this time, you can run the simulator by clicking the Confirm Guest button.
After the installation, you can examine the working environment of Packet Tracer as in the image below.
Installing Cisco Packet Tracer on Windows 10 can be quite beneficial for students or professionals pursuing a career in networking. Cisco Packet Tracer is a powerful network simulation tool that allows users to create and configure virtual networks. It enables users to practice networking concepts, simulate network configurations, and troubleshoot network issues. This blog post aims to guide you through the process of installing Cisco Packet Tracer on Windows 10, ensuring you have the necessary tools to excel in your networking endeavors.
Video Tutorial:
What’s Needed
Before we dive into the installation process, there are a few key components that you need to have in place. These requirements will ensure a smooth installation and optimal performance of Cisco Packet Tracer on your Windows 10 system. Here’s what you’ll need:
1. Windows 10 operating system: Ensure that you have a compatible version of Windows 10 installed on your computer.
2. Sufficient hardware resources: Cisco Packet Tracer requires a minimum of 2GB RAM and 1.5GB of free disk space. Ensure that your system meets these requirements to avoid any performance issues.
3. Downloaded installer: Obtain the Cisco Packet Tracer installer file from a reliable source. Make sure it is the latest version to take advantage of the latest features and bug fixes.
What Requires Your Focus?
Installing Cisco Packet Tracer on Windows 10 is a fairly straightforward process, but it does require your attention to a few crucial details. These key points will ensure a successful installation:
1. Administrative privileges: To install software on Windows 10, you need administrative privileges. Ensure that you have the necessary rights to install applications on your system.
2. Compatibility mode: In some cases, you may need to run the installer in compatibility mode if you encounter compatibility issues. We will cover this method later in the blog post.
3. Stable internet connection: It is recommended to have a stable internet connection during the installation process. This will ensure that all necessary components are downloaded correctly and that the installation proceeds smoothly.
Different Methods to Install Cisco Packet Tracer on Windows 10
Method 1: Using the Standard Installer
Step 1: Locate the downloaded Cisco Packet Tracer installer file on your computer.
Step 2: Right-click on the installer file and select «Run as administrator.«
Step 3: Follow the on-screen prompts to proceed with the installation. Accept the license agreement and choose the installation directory.
Step 4: Once the installation is complete, you can launch Cisco Packet Tracer from the Start menu or desktop shortcut.
Pros:
– Simple and straightforward installation process.
– No need for additional software or configurations.
– Ideal for users who prefer the standard installation method.
Cons:
– May encounter compatibility issues with certain versions of Windows 10.
Method 2: Using Compatibility Mode
Step 1: Right-click on the Cisco Packet Tracer installer file and select «Properties.«
Step 2: In the Properties window, navigate to the «Compatibility» tab.
Step 3: Check the box labeled «Run this program in compatibility mode for» and select a previous version of Windows from the drop-down menu.
Step 4: Click «Apply» and then «OK» to save the changes.
Step 5: Run the installer again by right-clicking on the file and selecting «Run as administrator.«
Step 6: Follow the on-screen prompts to complete the installation.
Pros:
– Resolves compatibility issues with certain versions of Windows 10.
– Allows installation on older versions of Windows that the software is compatible with.
Cons:
– May not be necessary if you have a compatible version of Windows 10.
Method 3: Using Virtualization Software
Step 1: Install virtualization software such as Oracle VirtualBox or VMware Workstation on your Windows 10 system.
Step 2: Create a new virtual machine and install a compatible version of Windows on it.
Step 3: Install the necessary drivers and software within the virtual machine.
Step 4: Download and install Cisco Packet Tracer within the virtual machine environment.
Step 5: Launch Cisco Packet Tracer from within the virtual machine.
Pros:
– Allows installation of Cisco Packet Tracer on Windows 10 without compatibility issues.
– Can run Cisco Packet Tracer alongside other virtualized networking environments.
Cons:
– Requires additional resources and technical knowledge.
– May impact overall system performance due to resource allocation to the virtual machine.
Method 4: Using Wine (for Linux Users)
Step 1: Install Wine on your Linux system. Wine is a compatibility layer that allows you to run Windows applications on Linux.
Step 2: Download the Windows version of Cisco Packet Tracer from the official website.
Step 3: Right-click on the installer file and select «Open with Wine Windows Program Loader.«
Step 4: Follow the on-screen prompts to complete the installation.
Step 5: Once the installation is complete, you can run Cisco Packet Tracer using Wine.
Pros:
– Enables Linux users to run Cisco Packet Tracer on their systems.
– Does not require a virtual machine or dual boot setup.
Cons:
– May encounter compatibility issues with certain Linux distributions.
– Some features of Cisco Packet Tracer may not function optimally in the Wine environment.
There are a few reasons why you might encounter issues when trying to install Cisco Packet Tracer on Windows 10. Here are some common problems and their potential fixes:
1. Missing Administrative Privileges: Ensure that you have administrative rights on your Windows 10 system. Without administrative privileges, you won’t be able to install software.
– Fix: Right-click on the installer file and select «Run as administrator» to launch the installation with the necessary privileges.
2. Incompatibility with Windows 10: Certain versions of Cisco Packet Tracer may not be fully compatible with the latest versions of Windows 10.
– Fix: Try running the installer in compatibility mode by following the steps outlined in Method 2 of this blog post.
3. Corrupted Installer File: If the downloaded installer file is corrupted or incomplete, the installation process may fail.
– Fix: Re-download the installer file from a reliable source and ensure that the file size matches the expected size.
4. Insufficient System Resources: Cisco Packet Tracer requires a minimum amount of RAM and disk space to install and run properly.
– Fix: Check your system specifications and ensure that you meet the minimum requirements. Free up disk space if necessary and close any unnecessary applications during the installation process.
5. Firewall or Antivirus Restrictions: Your firewall or antivirus software may be blocking the installation of Cisco Packet Tracer.
– Fix: Temporarily disable your firewall or antivirus software during the installation process. Remember to re-enable them afterward for security purposes.
Implications and Recommendations
Here are three recommendations to enhance your experience with Cisco Packet Tracer on Windows 10:
1. Explore Tutorials and Resources: Cisco Packet Tracer offers a vast array of features and capabilities. To make the most out of the tool, take advantage of online tutorials, videos, and user communities. These resources can provide valuable insights and guide you through various networking scenarios.
2. Practice Real-World Networking Scenarios: Use Cisco Packet Tracer to simulate real-world networking scenarios. Create complex network topologies, configure routers and switches, and troubleshoot connectivity issues. This hands-on approach will deepen your understanding of networking concepts and boost your practical skills.
3. Pursue Official Cisco Certifications: Cisco certifications are highly regarded in the networking industry. Consider pursuing CCNA (Cisco Certified Network Associate) or other Cisco certifications to validate your skills. Cisco Packet Tracer can serve as a valuable tool for preparing for these certifications by allowing you to practice various networking concepts.
5 FAQs about Installing Cisco Packet Tracer on Windows 10
Q1: Can I install Cisco Packet Tracer on macOS?
A: Yes, Cisco Packet Tracer is available for macOS. You can download the macOS version of Cisco Packet Tracer from the official Cisco Networking Academy website.
Q2: What are the system requirements for Cisco Packet Tracer on Windows 10?
A: Cisco Packet Tracer requires a minimum of 2GB RAM and 1.5GB of free disk space. It is recommended to have a modern processor and a stable internet connection for optimal performance.
Q3: Can I use Cisco Packet Tracer without an internet connection?
A: Yes, Cisco Packet Tracer can be used without an internet connection. However, an internet connection is required for certain features that rely on cloud services, such as Cisco DevNet.
Q4: Will Cisco Packet Tracer work on older versions of Windows?
A: Yes, Cisco Packet Tracer is compatible with older versions of Windows, including Windows 7 and Windows 8. Make sure to download the appropriate version of Cisco Packet Tracer for your operating system.
Q5: Is Cisco Packet Tracer free?
A: Yes, Cisco Packet Tracer is available for free to students, teachers, and alumni of the Cisco Networking Academy program. For other users, a free limited version is also available for download.
Final Words
Installing Cisco Packet Tracer on Windows 10 opens up a world of possibilities for networking enthusiasts. Whether you are a student looking to practice networking concepts or a professional working in the field, Cisco Packet Tracer can significantly enhance your learning and troubleshooting capabilities. By following the methods and recommendations outlined in this blog post, you can easily install Cisco Packet Tracer on your Windows 10 system and embark on an exciting networking journey. So, get ready to explore the vast realm of network simulation and unlock your networking potential with Cisco Packet Tracer.
Are you looking for a guide to installing Cisco Packet Tracer 8.2.0 on your Windows 11 or 10 PC? If so, in this article, I will provide a detailed explanation of the installation process. I will also cover the system requirements and get the simulator software.
If you are a Cisco Networking student preparing for exams, Packet Tracer is for you! It is suitable for you not only for exams but also for improving your networking skills. So you can create virtual network environments on your PC and start simulating Cisco devices!
Cisco Packet Tracer allows you to create a network in a virtual environment by simulating real Cisco network devices, firewalls, personal computers, and other devices. Using this software, you can prepare for exams offered by Cisco and improve your networking skills to stay one step ahead of others in the business world.
By using the simulation feature of Cisco software, you can examine step by step how computers on the same network or remote networks communicate over IP addresses. Another example is that, because corporate networks must have a redundant structure, you can gain experience by creating physical networks in virtual environments.
The Packet Tracer simulation program is compatible with Windows, Linux, and macOS operating systems, but older versions may not support new distributions. That’s why you need to check the system requirements when you need to install a more recent version.
Cisco released the final version of its network simulator software, 8.2.0, to its users in August 2022. You can download this new version for Windows, Linux, and macOS platforms from the Resources section by logging in to Netacad.
System Requirements
- Cisco Packet Tracer 8.2.0 (64-bit)
- Microsoft Windows 8.1, 10, 11 (64-bit), Ubuntu 20.04 LTS (64-bit), or macOS 10.14 or newer.
- amd64(x86-64) processor.
- 4GB of RAM.
- 1.4 GB of free disk space.
- Cisco Packet Tracer 8.2.0 (32-bit)
- Microsoft Windows 8.1, 10, 11 (32-bit).
- x86 compatible CPU.
- 2GB of RAM.
- 1.4 GB of free disk space.
How to Download and Install Packet Tracer
Before proceeding with the installation steps, you must download Packet Tracer for your Windows computer. Instead of downloading directly, you can download it from the Netacad website by following the steps below.
Step 1
You can download PT from the direct download links we have published on our website, or you can do this through the NetAcad website. Click Login to log in to your Netacad account.
Step 2
Type the email address and password that you used during registration and click the login button.
Step 3
After logging in to Netacad, click on Resources / Download Packet Tracer and then click on the 64-bit Download link under Windows Desktop Version 8.2.0 English at the bottom of the webpage to download the program.
On this page, you need to download compatible software according to the operating system you are using. In this article, since the installation process will be done on Windows 10 64-bit, the 64-bit version has been downloaded.
Step 4
Right-click on the Packet Tracer.exe setup file you downloaded to your computer and click the Run as Administrator option from the options that appear. Then click Run to confirm that you are running the setup file on your system.
Step 5
In the Packet Tracer license agreement window, please select the I accept the agreement option to confirm the rules and click the Next button.
Step 6
If you want to change the location you wish to install in the Select Destination Location window, you can click the Browse button to select a different location.
Click Next directly to choose to install in the default location in the Wizard.
Step 7
In the Select Start Menu Folder window, as the name suggests, you can change the name of the folder for the start menu after installation. Leave the default option here and continue with the installation.
Step 8
In the Select Additional Tasks window, you can create a desktop shortcut and a quick launch shortcut for Packet Tracer on your computer. You can continue this step by simply creating a desktop shortcut.
Step 9
In the Ready to Install window, you can review the configurations required to install Packet Tracer from the image below. If you want to make a change, you can go back to the previous steps.
Click the Install button to start copying the files directly.
Step 10
Wait while the necessary files for Packet Tracer 64-bit are copied to your system. This process will be completed in a few minutes.
Step 11
After completing the Cisco Packet Tracer Setup Wizard, click the Finish button to run the simulator.
Step 12
Click Yes to enable the multi-user function each time the Cisco network simulator is opened.
Step 13
You must be logged in to the Networking Academy to use the Cisco network simulation software. If you do not want to enter your account information every time, you can activate the Keep me logged in (for three months) option.
Step 14
Type your account credentials again on the Cisco NetAcad website and log in.
Step 15
The workspace environment of the new version of Packet Tracer after installation is as shown in the image below. You can reach this window by clicking Help / About to check the version.
How to Create a New Project
After installing the Cisco Packet Tracer on Windows 11 or 10, you can start creating a new topology by dragging and dropping devices such as computers, routers, switches, or security devices to the workspace.
Step 1
After clicking the computer icon from the End Devices panel, add two PCs to the workspace from the list containing end-user devices.
Step 2
Activate the Switch group from the network devices category, and then add two 2960 model Cisco Switches to the workspace.
Step 3
In the same way, a 2911 model Cisco Router from the network devices category should be added to the workspace.
Step 4
Select the Copper Straight-Through cable type from the cabling category, connect one end of the cable to the Ethernet interface of PC0, and then connect the other end to the FastEthernet 0/1 interface of the Switch.
Step 5
Since the network connection between the Switch and the Router must be fast, connect one end of the cable to the GigabitEthernet 0/1 interface of the Switch and the other end to the GigabitEthernet 0/1 interface of the Router.
Step 6
Likewise, wire the Switches and PCs connected to the other GigabitEthernet interface of the Router, as in the image below. Then, execute the commands below in the CLI command prompt to assign IP addresses to the Router’s interfaces and activate the ports.
Router# conft
Router(config)# interface gigabitEthernet 0/1
Router(config-if)# ip address 192.168.1.1 255.255.255.0
Router(config-if)# no shutdown
Router(config-if)# exit
Router(config)# interface gigabitEthernet 0/2
Router(config-if)# ip address 192.168.2.1 255.255.255.0
Router(config-if)# no shutdown
Step 7
To assign static IP addresses to PCs on the network, you must use the IP Configuration interface on the Desktop tab. After clicking on PC0, click on IP Configuration in the panel that opens, and assign the IP address 192.168.1.10.
IPv4 Address: 192.168.1.10
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Step 8
Since PC1 is in the network connected to the other interface of the Router, you need to assign an address from the IP block 192.168.2.0/24.
IPv4 Address: 192.168.2.20
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
Step 9
After making the necessary settings, use the PC0’s Command Prompt tool to ping the Router’s GigabitEthernet0/1 and GigabitEthernet0/2 interfaces as well as PC1 on the other network and test the network connection.
Step 10
Likewise, ping the Router’s GigabitEthernet 0/2 interface on the 192.168.2.0/24 network to which PC1 is connected and test the network connection. If you can access the interface to which it is connected, you will also be able to ping the 192.168.1.0/24 network, as the main task of the Router is to separate the networks.
How to Uninstall Packet Tracer from Windows 11 or 10
You can easily do this from your Windows system when new versions of Packet Tracer are released, or you want to uninstall them for some reason.
Steps:
Step 1
To remove the Cisco software you have installed from your system, click Start Menu, Settings, and then Apps.
Step 2
After opening Apps & Features, type the name of the program you want to uninstall, as in the image below, and click the Uninstall button.
Step 3
Click Yes in the pop-up window to confirm the complete deletion of Packet Tracer and its components.
Step 4
After completely removing the Cisco Packet Tracer from your system, click OK in the information window and finish the process.
Video
Installing Old Versions
Conclusion
In conclusion, Cisco Packet Tracer version 8.2 is an essential tool. It is valuable for both Cisco Networking students and professionals.
This software can simulate real-world network scenarios. Thus, you can improve your professional networking skills. In addition, you will get a great hands-on learning experience to prepare for Cisco exams.
Also, you can easily set it up with the screenshots I have added to this article. After that, you can benefit from the functionality of Packet Tracer. In this way, you can understand networking better and create virtual environments. In addition, this simulator software helps you to stay up-to-date in the dynamic networking field.
Table of Contents
In this article, we will see how to install Cisco packet tracer in Windows 10. Cisco packet tracer is probably the most famous visual simulation tool used by Network Administrators, Analysts and Educators to simulate network design and architecture. But among all Students are the one who uses the most to practice Cisco certification examinations. Packet Tracer is developed by Cisco Systems as part of the Networking Academy. Anyone can download the software for free by just enrolling in of the Network Academy introductory courses.
Cisco Packet tracer is not just used for practicing build simple and complex networks but can also be easily integrated with IoT devices, Python code, or network automation. It is currently available for Windows, MacOS and Ubuntu based Systems. Here we will the steps to download and install packet tracer on Windows 10 System.
Important Features
- Wide range of Cisco routers and switches simulation supported
- Can be used for building Complex network design
- Network architecture can be easily visualized
- Practice of rack, stack, and cabling skills in the virtual lab can be easily done
- Integrate IoT devices, Python code, or network automation
- Unlimited number of devices can be simulated
- Almost all the networking protocols are supported
Also Read: How to Freeze a Row in Excel Using 5 Easy Steps
Step 1: Prerequisites
a) You should have a running Windows 10 System.
b) You should have access to install software in your System.
c) You should have an active Internet in your System.
Step 2: View Courses
To download Cisco Packet Tracer, you need to enroll in one of the three self-paced Packet Tracer Courses. For that, you need to visit Network Academy official website and click on View courses as shown below.
If pop-up is not blocked in your browser, then you will see a new window opened automatically that will redirect you to Skills For All website. If it is not opened then you need to click manually on Skills For All link as shown below.
Step 3: Enroll to the Course
After getting redirected to below website, you will be asked to select your language. Once selected, scroll down a bit and you will see Getting Started with Cisco Packet Tracer link. You need to click on this link to enroll in short Cisco Packet Tracer course.
You need to again select your language and click on Get Started to enroll into the course.
Step 4: Sign Up
You need to login to be enrolled, so if already have an account then give your Email and Password to login. If you don’t have then you need to sign up and create an account first.
If you scroll down a little, Sign Up option will be visible as shown below. Click on it to create an account,
You can choose to sign up with your Google account or with your Networking Academy account. If not, then you can create a new account by providing your country name, year of birth and month of birth as shown below. Then click on Continue.
Next, you need to fill your First name, Last name, Email, Password and then confirm your password. Once filled, click on Create account as shown below.
You will be asked to go through the Agreement and then check I have read and agreed to the terms & conditions option and click on Accept & Continue.
Step 5: Download Cisco Packet Tracer
In the next window, when you scroll down a little, you will see an option Install Cisco Packet Tracer. Click on it to open the Packet Tracer download link.
In the next page, you will see the download link for MacOS, Ubuntu and Windows operating system along with the steps to install the software. Since in our case, we are installing for Windows so we will tap on Packet Tracer 8.2.0 Windows 64bit link as shown below.
It will start downloading on your local system as shown below.
Step 6: Install Cisco Packet Tracer
Once downloaded, you need to double click on packet tracer software to start the installation. You need to first go through the License Agreement and must accept the agreement terms to continue with the installation. So go ahead and check I accept the agreement checkbox and then Click Next.
In the next window, you need to provide the destination folder location where you want to install the Cisco Packet Tracer. By default, it will install under C:\Program Files folder location as shown below. Then click on Next.
Here you need to select the folder location to place the program’s shortcut. You can choose different location as per your requirement. For now, we are going to use the default Cisco Packet Tracer folder as shown below. Then Click on Next.
If there is any additional task you would like to setup then choose your option below and click on Next.
Finally you will see the summary of all the setup tasks going to be performed as shown below. If everything looks fine then Click on Install.
The installation will start and the progress can be tracked on below screen.
Once the application is successfully installed, you will see below completing setup wizard with Launch Cisco Packet Tracer checkbox selected. If you would like to launch the packet tracer then leave the checkbox selected. Otherwise, uncheck it and then click on Finish.
Step 7: Launch Cisco Packet Tracer
Immediately after launching the packet tracer, you will see below dialog box asking to start the application in multi-user mode. You can choose the appropriate option as per your requirement. Here we would be running multi-user so we are clicking on Yes.
In the next step, you will be asked to Sign in using either Networking Academy account or Skills for All account to keep the application running. Since we have created account on Skills for All so we will click on this option to Sign in.
If you are already signed in, then probably it won’t ask you to enter the user and password again, it will directly show you below successfully logged in to Cisco Packet Tracer message or else you need to provide your user name and password again which you have created in the earlier step.
You can close the above browser tab and simultaneously you will see below Cisco Packet Tracer application launched successfully. This confirms your installation and launching of application is now completed. You are ready to start your work.
