Applies ToWindows 11 Windows 10
Note: If your issue prevents you from booting into Windows, you won’t be able to follow the steps in this article. After the device tries to restart a few times, it should automatically enter the Windows Recovery Environment. To find information about restoring your device in this scenario, please visit the article, Windows Recovery Environment.
Summary
A «clean boot» starts Windows with a minimal set of drivers and startup programs, so that you can determine whether a background program is interfering with your game or program. This is similar to starting Windows in Safe Mode, but provides you more control over which services and programs run at startup to help you isolate the cause of a problem.
How to perform a clean boot
These steps might look complicated at first glance, but following them in order, step-by-step, will help get you back on track.
-
Sign in to the computer as an administrator. See Manage user accounts in Windows to learn more about configuring a user account as an administrator.
-
Select Search , type msconfig , and then select System Configuration from the list of results.
Important: If the computer is connected to a network, network policy settings might prevent you from following these steps. Only use the System Configuration utility to change the advanced boot options on the computer with guidance from a Microsoft support engineer. Using the System Configuration utility might make the computer unusable.
-
On the Services tab of System Configuration, select Hide all Microsoft services, and then select Disable all. Select Apply.
-
On the Startup tab of System Configuration, select Open Task Manager.
-
On the Startup apps tab in Task Manager, for each Enabled startup item, select the item and then select Disable. (Keep track of which items have been Disabled. You will need to know this later.)
-
Close Task Manager.
-
On the Startup tab of System Configuration, select OK. When you restart the computer, it will be in a clean boot environment. You can now try to troubleshoot your problem by trying the troubleshooting steps in the section, Install, uninstall, or run an application.
Warning: Your computer might temporarily lose some functionality while in a clean boot environment.
-
Once you are done troubleshooting your problem and want to return your computer to a normal startup, follow the steps in the section, Reset the computer to start normally after clean boot troubleshooting.
Install, uninstall, or run an application
After you restart the computer, you’ll have a clean boot environment. Then, do one of the following, as appropriate for your situation:
Note: If you receive the error, «The Windows Installer service could not be accessed», you’ll need more information. Follow the steps in the section, How to start the Windows Installer service when system services are not loaded. Then try installing or uninstalling the app or update again.
If the installation or uninstallation is successful, your issue is resolved. To return your computer to a normal startup, follow the steps in the section, Reset the computer to start normally after clean boot troubleshooting.
If the installation or uninstallation still fails, that means this issue is not caused by interference from a service or an app. You might need to contact the program manufacturer for more specific support.
If the app runs correctly while in a clean boot environment, then your problem was caused by interference from another app or service. You can find out which app or service is causing the issue by following the steps in the section, How to determine what is causing the problem after you do a clean boot.
If your app still doesn’t run as expected while in a clean boot environment, then your problem is not caused by interference from another app or service. You might need to contact the program manufacturer for more specific support.
If you run a Setup program without starting the Windows Installer service, you might receive the following error message:
The Windows Installer service could not be accessed. Contact your support personnel to verify that the Windows Installer service is properly registered.
The Windows Installer service doesn’t start if you clear the Load system services check box in the System Configuration utility. To use the Windows Installer service when system services are not loaded, start the service manually. Here’s how:
-
Select Search , then type computer management. Select Computer Management from the list of results.
-
In the console tree, select the arrow to expand Services and Applications, and then select Services.
-
In the details pane, right-click Windows Installer, and then select Start.
How to determine what is causing the problem after you do a clean boot
If your problem does not occur while the computer is in a clean boot environment, then you can determine which startup app or service is causing the problem by systematically turning them on or off and restarting the computer. While turning on a single service or startup item and rebooting each time will eventually find the problematic service or application, the most efficient way to do this is to test half of them at a time, thus eliminating half of the items as the potential cause with each reboot of the computer. You can then repeat this process until you’ve isolated the problem. For detailed steps for how to do this, expand the following section:
-
Sign in to the computer as an administrator. See Manage user accounts in Windows to learn more about configuring a user account as an administrator.
-
Select Search , then type msconfig. Select System Configuration from the list of results.
-
Select the Services tab, and then select Hide all Microsoft services.
-
Select each of the check boxes in the upper half of the Service list.
-
Select OK, then restart Windows.
-
After the computer restarts, determine whether the problem still occurs.
-
If the problem still occurs, one of the checked items is the problematic service. Repeat steps 1 through 6, but in Step 4, clear the lower half of the boxes in the Service list that you selected in your last test.
-
If the problem doesn’t occur, the checked items are not the cause of the problem. Repeat steps 1 through 6, but in Step 4, turn on the upper half of the boxes that you cleared in the Service list in the last test.
-
Repeat these steps until you’ve either isolated the problem to a single service, or until you’ve determined that none of the services are the cause of the problem. If you experience the problem when only one service is selected in the Service list, then that startup service is the one causing the problem, and you should go to step 9. If none of the services cause the problem, go to step 7.
-
-
Select the Startup tab, then select Open Task Manager. On the Startup apps tab on Task Manager, one at a time, select the upper half of the items you Disabled earlier, then select Enable.
-
Restart Windows.
-
If the problem still occurs, repeat step 7, but this time disable the lower half of the items you enabled in your last test.
-
If the problem does not occur, repeat step 7, but disable everything you enabled in your last test and enable the other half of the items you disabled.
-
If you still experience the problem after only one Startup item is enabled, then the enabled item is the one causing the problem, and you should go to step 9. If no Startup item causes the problem, there might be a problem with a Microsoft service. See Recovery options in Windows.
-
-
After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved, or run Windows with the service unchecked or the Startup item disabled.
Reset the computer to start normally after clean boot troubleshooting
After you finish troubleshooting, follow these steps to reset the computer to start normally.
-
Select Search , then type msconfig. Select System Configuration from the list of results.
-
On the General tab, select Normal Startup.
-
Select the Services tab, clear the check box beside Hide all Microsoft services, select Enable all, then select Apply.
-
Select the Startup tab, then select Open Task Manager.
-
In Task Manager, Enable all of the startup programs you had disabled before, and then select OK.
-
When you’re prompted to restart the computer, select Restart.
Need more help?
Want more options?
Explore subscription benefits, browse training courses, learn how to secure your device, and more.
Исправить загрузочное меню можно с помощью встроенной в Windows программы BCDEdit.exe (сокращение от Boot Configuration Data Edit), но для этого потребуется сначала открыть окно командной строки и знать параметры запуска самой программы. Ошибки чреваты проблемами с загрузкой ОС.
Но есть более элегантный способ — использовать стороннюю бесплатную утилиту EasyBCD от производителя NeoSmart Technologies (www.neosmart.net). Для ее инсталляции и запуска могут понадобиться права администратора.
После старта программа попросит подтвердить, что вы не собираетесь использовать ее в коммерческих целях, иначе вам придется ее купить. Затем откроется окно утилиты с набором функциональных кнопок слева и информационной областью в центре. Кнопка «View Settings» позволяет увидеть текущие настройки меню загрузки.
Чтобы удалить бессмысленные записи, кликните по «Edit Boot Menu». Выделите ненужную строку, нажмите на «Delete» и сохраните изменения щелчком по кнопке «Save Settings».
Обратите внимание, что с помощью этой программы также можно задать продолжительность отображения меню загрузки, в том числе и вовсе отключить его вывод на экран.
То же самое можно сделать, если зайти в «Панель управления | Система и безопасность | Дополнительные параметры системы» и на вкладке «Дополнительно» в разделе «Загрузка и восстановление системы» нажать на кнопку «Параметры». Для этого могут понадобиться права администратора.
Learn how to perform a clean boot in Windows 11, 10, 8, and 7. This guide explains the step-by-step process to troubleshoot software conflicts and resolve performance issues using a clean boot.
Why You Should Perform a Clean Boot?
A clean boot in Windows is an effective troubleshooting method to isolate software conflicts, startup issues, and performance problems.
By performing a clean boot, Windows starts with a minimal set of drivers and startup programs, which helps you pinpoint whether a background service or startup item is causing issues.
Performing a clean boot is essential for:
- Diagnosing Software Conflicts: Some programs or services may conflict with each other, causing errors or slow performance.
- Resolving Startup Problems: A clean boot helps identify startup programs that are causing delays or crashes.
- Improving System Performance: Reducing unnecessary background services can resolve performance-related issues.
- Troubleshooting Errors: If you experience Blue Screen of Death (BSOD) or random freezes, a clean boot can help isolate faulty software or drivers.
How to Perform a Clean Boot in Windows 11
- Open System Configuration: Press
Win + R, typemsconfig, and press Enter. - Hide Microsoft Services: Go to the Services tab and check Hide all Microsoft services.
- Disable Non-Microsoft Services: Click Disable all to turn off non-Microsoft services.
- Disable Startup Programs: Go to the Startup tab and click Open Task Manager. Disable all unnecessary startup programs.
- Restart Your Computer: Click OK and restart to enter clean boot mode.
How to Revert to Normal Boot in Windows 11
- Open the System Configuration tool again.
- Go to the General tab and choose Normal startup.
- Restart your system.
Once you’ve completed your troubleshooting, return to normal boot by reopening System Configuration, choosing Normal startup, and restarting.
Note: If your computer is connected to a network, network policy settings might prevent you from following the steps outlined in this guide. Only use the System Configuration utility to change the advanced boot options on your computer with guidance from a Microsoft support engineer.
How to Perform a Clean Boot in Windows 10
- Open System Configuration: Press
Win + R, typemsconfig, and hit Enter. - Hide Microsoft Services: In the Services tab, check the box for Hide all Microsoft services.
- Disable Non-Microsoft Services: Click Disable all to prevent third-party services from running.
- Disable Startup Programs: In the Startup tab, open Task Manager and disable all startup items.
- Restart: Apply the changes and restart your computer.
While in this environment, you can troubleshoot or install/uninstall applications. Some functionality might be temporarily disabled. After troubleshooting, reset your computer to normal startup by opening System Configuration, selecting Normal startup, and restarting.
How to Perform a Clean Boot in Windows 8 and 7
For both Windows 8 and 7, the clean boot process is nearly identical to Windows 10:
- Open System Configuration by typing
msconfigin the Run dialog (Win + R). - In the Services tab, check Hide all Microsoft services and click Disable All.
- Switch to the Startup tab in System Configuration (Windows 8 users may need to open Task Manager for this step).
- Disable all unnecessary startup programs.
- Restart the system.
Benefits of Performing a Clean Boot
- Isolate software conflicts.
- Speed up startup and performance.
- Identify faulty applications.
- Troubleshoot hardware or driver issues.
How to Determine What is Causing the Problem After You Perform a Clean Boot
If your problem doesn’t occur in a clean boot environment, you can pinpoint the problematic service or startup program by systematically re-enabling them in batches and restarting your computer each time. Start by enabling half the services and testing, then continue enabling or disabling in halves until you identify the faulty program. This method efficiently narrows down the cause. Once isolated, you can decide whether to contact the software vendor for a solution or leave the item disabled to avoid the issue.
For detailed steps, you can refer to Microsoft’s official guide.
FAQs About Clean Boot in Windows
1. What is the difference between clean boot and safe mode?
While both clean boot and safe mode are used for troubleshooting, a clean boot only disables non-Microsoft services and startup programs, allowing more features to run. Safe mode, on the other hand, disables most drivers and essential services to load only basic functions of the OS.
2. Will I lose my files after performing a clean boot?
No, performing a clean boot doesn’t delete your files. It simply prevents third-party services and programs from running during startup.
3. How often should I clean boot my system?
You only need to perform a clean boot when troubleshooting software conflicts, performance issues, or startup problems. It is not recommended to perform it regularly.
4. Can I still use my installed programs in clean boot?
Yes, your programs are still installed, but some might not work until you revert to a normal boot since certain services may be disabled in clean boot.
5. How do I know if a clean boot solved my issue?
If the problem doesn’t occur after performing a clean boot, it’s likely caused by one of the disabled services or programs. You can narrow it down by selectively enabling services one by one until the issue reappears.
Conclusion
Performing a clean boot in Windows 11, 10, 8, or 7 is a straightforward and highly effective way to troubleshoot software conflicts and performance issues. By following the steps outlined above, you can isolate the cause of system problems without affecting your data or permanently disabling essential programs.
Visit Our Post Page: Blog Page
-
Home
-
News
- How to Clean Boot Windows 10 and Why You Need to Do So?
How to Clean Boot Windows 10 and Why You Need to Do So?
By Stella | Follow |
Last Updated
If you are unable to run a program or install an update on your computer, you can perform a clean boot to try to find the conflicting service that prevents you from using your computer normally. You can see this post to learn how to clean boot Windows 10. More useful information, you can visit the MiniTool home page.
Why You Need to Perform a Clean Boot in Windows 10?
You know that there are different device drivers, settings, and programs on your Windows 10 computer. At times, the software may run into conflicts. But, you don’t know which programs are conflicting. You just note that your Windows can’t boot normally or you can’t install updates normally.
In this situation, you can consider performing a Windows 10 clean boot, since a clean boot enables your Windows to boot with a minimal set of drivers and startup programs so that you can find out whether there is a background program is disturbing the normal operation of your Windows 10.
In this guide, we will walk you through the detailed steps on how to perform a clean boot in Windows 10.
To clean boot a Windows 10 computer, you need to follow these steps:
1. Press Cortana.
2. Type msconfig in the search box and press Enter.
3. Switch to the Services section.
4. Check the Hide all Microsoft services option.
5. Press the Disable all button.
6. Switch to the Startup section.
7. Press Open Task Manager.
8. Click the startup program that may interfere with Windows 10 and press Disable. Then, repeat this step to disable all the suspected programs.
9. Close Task Manager and the System Configuration window.
10. Restart your computer.
Your Windows 10 computer will only boot with the essentials. If you can’t use a program or install an update previously, you can try to do these jobs now.
If the issue still exists, you can know that there is no conflict between software and the exact cause happens somewhere else.
If the issue disappears in the clean boot environment, then you can try to find out the offending program or service that cause the issue. You need to repeat step 1 to step 4 above, but only re-enable half of the services
For instance, you can re-enable the top half of all the non-Microsoft related services (the ones that are important to Windows should be hidden in the fourth step). After restarting your computer, you can go to see if the issue happens again. If not, you need to re-enable the rest half non-Microsoft services to have a try again. If the issue appears, you can know that the conflicting service is in the lower half ones.
No matter the conflict happens in the top half or the bottom half of the services, you can then narrow down the search range by disabling services and rebooting PC. If the issue disappears, you can know what exactly causes it.
How to Quit the Clean Boot Environment?
After finding the conflicting program, you can let your computer quit the clean boot environment. You can follow these steps:
- Press Cortana.
- Type msconfig in the search box and press Enter.
- Switch to the Services
- Check Hide all Microsoft services.
- Press Enable all.
- Check the offending startup service.
- Switch to Startup.
- Press Open Task Manager.
- Choose a startup program and press Enable.
- Repeat the above step to enable all startup programs.
- Close Task Manager and the System Configuration window.
- Restart your computer.
Now, your computer should function normally.
About The Author
Position: Columnist
Stella has been working in MiniTool Software as an English Editor for more than 8 years. Her articles mainly cover the fields of data recovery including storage media data recovery, phone data recovery, and photo recovery, videos download, partition management, and video & audio format conversions.
What is Clean Boot? Why do we need to do Clean Boot?
Clean booting in windows 10/8/7 is a process to use limited drivers and programs which we can use to help us to run games or program that need performance.
How to do a Clean Boot in Windows?
- Log in to your administrator account.
- Open Run – press “Windows+R” button to start Run. Then write “MSConfig” and press enter.
- In the General tab in the Startup selection choose the Selective startup. Now uncheck Load startup items and make sure Load system services and Use original boot configuration are checked. Refer to the below image for reference.
- Now to go Services tab. Check the “Hide all Microsoft services” and click on “Disable all”. Note: Some of your programs wont run or wont respond because we have disabled all the services except Microsoft, So before you click on “Disable all” you might want to look for any specific service that you might need to work upon.
- Now Click on Apply and OK button.
Now your Windows is in Clean Boot state and should perform better than before.
Note: If you found any problems then you can undo all the steps this will revert all the changes you have done and your windows will be normal as before.