Как переустановить microsoft defender в windows 10 - Windowsa.top

You must Reinstall Windows Defender Firewall when it stops functioning the way it should. Without firewall working, your PC is more open to threats and viruses. So, the best way to make firewall work is to reinstall it completely. You may like to Turn On / Off Firewall & Network Protection on Windows 10.

Many times, when a PC gets infected, the malware or virus change the firewall settings, which in turn makes this integrated security tool non-operable. Also, in some cases, users try to configure firewall settings and end up messing everything. Therefore, if firewall stops working on your PC for varying computer reasons, then quickly Reinstall Windows Defender Firewall.

But to do so, you have to run few commands one after the other in an elevated Command Prompt. Hence, let us head towards the steps and see the method of reinstalling firewall.

Follow Windows 10 Tips to Run a Program Using Administrator Privilege to know more.

How to Reinstall Windows Defender Firewall in Windows 10

Step 1 – To Reinstall Windows Defender Firewall, open Start Menu, and type cmd. This will show up Cortana with Command Prompt as the Best match. Simply, make a right-click on the result and choose the option namely Run as administrator.

In addition, you can also Launch Elevated Command Prompt on Windows 10 using more ways.

Step 2 – This action will launch UAC prompt on your PC screen, select Yes.

Step 3 – Copy-paste the below line of commands one by one to Reinstall Windows Defender Firewall in Windows 10. Well, make sure to press Enter after pasting every command to execute them

Recreate the Service

Rundll32 setupapi,InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf

Start Windows Defender Firewall Service

sc start mpssvc

Reset Windows Defender Firewall Configurations

netsh advfirewall reset

netsh advfirewall set domainprofile state on

netsh advfirewall set privateprofile state on

Step 4 – After running all the above commands perfectly, it’s time to Restart Windows 10 PC. Restarting the PC will successfully Reinstall Windows Defender Firewall in Windows 10.

Conclusion

So, hopefully, by following the above simple series of commands you will be able to Reinstall Windows Defender Firewall. Well, you all know that without firewall functioning properly, there are chances for your PC to get infected. Though Microsoft is developing things quite frequently, you also need to take care of your PC at the same time. In case, you have any other way of reinstalling this specific security of Windows 10, write down to us.

Источник

Here’s a guide for Microsoft/Windows Defender download, install, uninstall and reinstall on Windows 10/11. Utilize this best free antivirus software for Windows to protect your computer from threats. For more computer troubleshooting tips, you can visit MiniTool Software official website.

This post mainly introduces how to download Windows Defender on Windows 10/11 computer. 3 ways are offered to let you get the Microsoft Defender app. You can also learn how to uninstall and reinstall Windows Defender on Windows 10/11, how to fix Windows Defender can’t open/start issue, how to recover deleted or lost files from your PC, etc.

Also read: Learn the best tips and tricks for data recovery hard drive on Windows 11/10/8/7.

About Windows Defender

Windows Defender, also known as Microsoft Defender or Windows Security, is a 100% free antivirus program developed by Microsoft. It is included in Windows 11/10/8/8.1/7/Vista.

Windows Defender offers 4 scan modes: full scan, quick scan, custom scan, and offline scan.

Users can open Windows Defender on Windows 10/11 and turn on or off the real-time protection, enable or disable firewall & network protection, change the automatic scanning settings, adjust the advanced protection settings, and more.

Check for more information about how to stay protected with Windows Security.

How to Download and Install Windows Defender on Windows 10/11

Windows Defender is automatically installed for free on all PCs that run on Windows 11/10/8/7. If you can’t find Windows Defender on your computer, generally, you have 3 ways to get Windows Defender.

Way 1. Update Windows OS

You can try to update Windows 11/10 to the latest version to see if Windows Defender comes back.

To update your system, you can click Start -> Settings -> Update & Security (Privacy & Security) -> Windows Update -> Check for updates. You can also use this way to update Windows Defender to the latest version on Windows 10/11.

Way 2. Manually Download and Install Windows Defender on Windows 10/11

Open Microsoft Store on your Windows computer. For Windows 11, you can click the Microsoft Store icon on the taskbar to open it. You can also press Windows + S, search for Microsoft Store in the search box, and click the Microsoft Store app to open it.
In Microsoft Store, you can type Microsoft Defender Preview in the search box, and choose the Microsoft Defender Preview app.
Click the Get button or Get in Store app button to download Microsoft Defender for Windows 10 or 11.

Way 3. Find Third-party Windows Defender Download Websites

You may also find some third-party reliable websites to get Microsoft Defender. Some websites are listed below for your reference, but you should identify by yourself if the Windows Defender download resource is reliable.

https://windows-defender.en.softonic.com/download
https://downloads.digitaltrends.com/windows-defender/windows
https://www.filehorse.com/download-windows-defender-64/
https://download.cnet.com/Microsoft-Windows-Defender/3000-8022_4-55082.html

Related: How to Enable or Disable Microsoft Defender in Windows 11

Download Microsoft Defender for Android from Google Play Store

If you want to download Microsoft Defender for Android, you can open the Play Store on your device, search for Microsoft Defender, and tap the Install button to download and install Microsoft Defender for your Android phone or tablet.

How to Uninstall and Reinstall Windows Defender on Windows 10/11

If you want to uninstall the built-in Windows Defender app on Windows 10/11, you may need to use Windows PowerShell to do it. You may refer to this post: How to Uninstall, Restore, Reinstall Windows 10 Built-in Apps.

If you download and install Microsoft Defender from Microsoft Store or other third-party websites, you can open Control Panel on Windows, right-click the Microsoft Defender app and select Uninstall to remove it from your computer.

After you uninstall Windows Defender, you can follow the instructions above to reinstall Windows Defender if you want.

Fix Windows Defender Can’t Open/Start on Windows 10/11

If you can’t open Windows Defender on your computer, you may try the 10 tips below to see if they can help bring this free antivirus app back to normal working.

Fix 1. Restart your computer and try to open Windows Defender again.

Fix 2. Update Windows system.

You can follow the guide above to update your Windows 10 or 11 OS to see if Windows Security can work normally again.

Fix 3. Run SFC scan.

You can perform a system scan to repair possible corrupted system files in your device.

Press Windows + R, type cmd, and press Ctrl + Shift + Enter to open Windows Command Prompt.
Type sfc /scannow command and press Enter to run the SFC tool to automatically check and fix corrupted system files. If this command doesn’t work, you can type DISM /Online /Cleanup-image /RestoreHealth command and press Enter to run this command first.

Fix 4. Reset Windows Defender app.

If Windows Defender is not working well on your computer, you can follow the operation below to reset the app settings to default to see if it helps.

Press Windows + X and select Windows PowerShell (Admin). For Windows 11, select Windows Terminal (Admin).
Type the command: Get-AppxPackage Microsoft.SecHealthUI -AllUsers | Reset-AppxPackage. Press Enter to execute the command.

Fix 5. Uninstall and reinstall Windows Defender. The instructions are introduced above.

Fix 6. Disable any third-party antivirus software on your computer since it may be conflicted with the Windows Defender antivirus program.

Fix 7. Use third-party antivirus software.

If Windows Defender has problems or can’t work on your computer, you can turn to some third-party top free antivirus software for Windows 10/11.

Fix 8. Start Windows in Safe Mode to see if Windows Defender can smoothly open and work.

Fix 9. Perform a System Restore. If you still favor Windows Defender and do not want to use other antivirus applications, you can try to restore your Windows system to a previous state to see if the Windows Security app can work properly.

Fix 10. If Windows Defender is not working and you have some other problems on your computer, you may reinstall your Windows OS.

Note: Before you perform the system restore or reinstall your computer, it’s highly advised you make a backup of your Windows system and important data.

How to Recover Deleted/Lost Files on Windows 10/11 for Free

If your computer has problems and you lost some important data, you can try a professional data recovery program to restore the lost data from your PC.

MiniTool Power Data Recovery is a top data recovery program that helps you recover data from various data loss situations. You can use it to recover permanently deleted files, recover data from a corrupted/formatted hard drive, recover data after malware/virus infection, recover data when the PC won’t boot, and more. Unless the hard drive is physically damaged and can’t be recognized by your computer, you can try this tool to restore data.

As for supported devices, you can use MiniTool Power Data Recovery to recover any deleted/lost files from a Windows PC or laptop, USB flash drive, memory card, external hard drive, SSD, etc.

Download and install MiniTool Power Data Recovery on your Windows PC or laptop, and check the guide below for how to use it to recover data.

MiniTool Power Data Recovery FreeClick to Download100%Clean & Safe

Launch MiniTool Power Data Recovery to access its main interface.
On the main UI, you can choose the drive or device you want to scan. If you know which drive contains your deleted/lost files, you can select the target drive under Logical Drives and click Scan. If you don’t know which drive to scan, you can click the Devices tab, select the whole disk or device and click Scan. For an external device, you need to connect it to your Windows computer beforehand.
Let the software finish the scan. After that, you can check the scan result and find if the target files are listed, if so, check those files and click the Save Then you can choose a preferred new location to store the recovered files.

Tip: If you only want to scan a specific type of file, you can click the Scan Settings icon in the left panel of the main UI and choose the file types you want to scan.

Free Disk Partition Manager for Windows 11/10/8/7

If your computer has problems or you reinstalled your OS, you may need a professional disk partition manager to repartition the hard disk or manage the hard drives from other aspects.

MiniTool Partition Wizard is a popular free hard drive partition manager for Windows. It lets you manage hard drives and partitions from all aspects.

For partition management, you can use it to create, delete, extend, resize, split, merge, format, wipe partitions, convert partition format, check file system errors, change the drive letter, and more.

For disk management, you can use MiniTool Partition Wizard to migrate OS to SSD/HD, copy disk, recover lost partitions, convert disk format, wipe disk, test hard drive speed, analyze hard drive space, and more.

This disk partition manager is extremely easy to use and fulfills all your hard disk management needs. It is free and clean. You can download and install MiniTool Partition Wizard on your Windows PC or laptop to test it now.

MiniTool Partition Wizard FreeClick to Download100%Clean & Safe

Free PC Backup Software for Windows 10/11

For system and data backup on a PC, you can utilize a professional free PC backup tool.

MiniTool ShadowMaker is one of the best free PC backup utilities that supports Windows system backup and file backup.

You can use it to easily create a system image backup of your Windows OS and restore your OS from the backups when needed.

As a professional PC backup application, you can also use it to back up any files on your computer at a fast speed. You can easily select files, folders, or partitions to back up to external hard drives or USB flash drives. You can even select the whole disk content to back up.

Besides, it also offers another backup module: File Sync. You can easily sync data to the target device to make a backup.

Many other backup features are provided, e.g. disk clone, automatic backup, incremental backup, etc.

Use this top free PC backup tool to keep your computer data safe.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Click to Tweet

Conclusion

This post offers a guide for Windows Defender download, install, uninstall, and reinstall on Windows 10/11. Some tips to help you fix Windows Defender not working or can’t open problem are also provided. Some useful free Windows tools are offered to help you with data recovery, system and data backup, and disk partition management. Hope it helps.

If you have any problems with using MiniTool Software products, you can contact [email protected].

Источник

Здравствуйте админ! После того, как я обновил на своём ноутбуке Windows 8.1 до Windows 10, десятка стала активно обновляться и после каждого выключения ноутбука выходит сообщение «Работа с обновлениями. Завершено 100%. Не выключайте компьютер» и ноутбук не выключается довольно долго, мне это надоело и я отключил обновления Windows по вашей статье. Всё бы хорошо, но в качестве антивирусной программы я использую Защитник Windows (Windows Defender), а его антивирусные базы обновляются через Центр обновления Windows, который я отключил, а это значит, что антивирусные базы встроенного в Win 10 антивируса не получают обновлений. Скажите, как можно вручную обновить Защитник Windows? Можно где-то отдельно скачать файлы обновлений для Защитника Windows для операционных систем Windows 7, Windows 8.1 и Windows 10?

Как вручную (автономно) обновить встроенный в Windows 10 антивирус Windows Defender (Защитник Windows)

Привет друзья! Все мы знаем, что встроенный в Windows 10 бесплатный антивирус Windows Defender защищает нашу операционную систему от различных вредоносных программ и получает обновления вирусных сигнатур каждый день через Центр обновлений Windows.

Если вы отключили обновления в Windows 10, то это значит, что встроенный в операционную систему антивирус Windows Defender также не будет обновляться. Поэтому имеет большое значение, держать Центр обновления Windows включенным, чтобы Защитник Windows получал обновления своевременно.

Если вы по каким-либо причинам отключили обновления Windows, то обновить Windows Defender можно вручную (автономно), в сегодняшней статье я покажу вам, как это можно сделать.

В параметрах Windows выбираем «Обновление и безопасность»,

затем «Защитник Windows» и смотрим версию подсистемы, а также определения антивирусной программы и определения антишпионской программы. После ручного обновления версии должны измениться.

Щёлкаем левой мышью на кнопке «Поиск Windows»

и набираем «Защитник Windows», затем жмём на появившееся приложение «Защитник Windows»,

появляется окно антивируса Windows Defender. Видим, что определения вирусов и программ-шпионов очень старые.

Жмём на кнопку «Обновить».

Жмём на кнопку «Обновление определений».

Происходит обновление антивирусных баз Защитника Windows.

Антивирус обновлён.

Версия подсистемы, а так же определения антивирусной программы и определения антишпионской программы изменились.

В процессе обновления у вас может выйти ошибка — «Не удалось обновить определения вирусов и программ шпионов».

В этом случае перейдите по ссылке на официальный сайт Майкрософт

https://www.microsoft.com/en-us/wdsi/definitions

Обновление защиты от вредоносных программ и программ-шпионов программное обеспечение Microsoft.

Ведём шкалу прокрутки вниз до слов…

Обновления для защиты от вредоносных программ и программ-шпионов.

Выбираем версию установленной на нашем компьютере операционной системы и её разрядность. В моём случае, это Windows 10-64 бит.

Мне на компьютер скачивается файл mpam-fe.exe с обновлениями вирусных сигнатур для Защитника Windows размером 120 Мб. Запускаю данный файл от администратора.

Программа не открывает никакого окна. Windows Defender обновляется за несколько минут. Теперь в параметрах Windows выберите «Обновление и безопасность», затем «Защитник Windows» и смотрите версию подсистемы, а также определения антивирусной программы и определения антишпионской программы. После ручного обновления версии должны измениться.

Источник

This wikiHow will teach you how to restore Windows Defender to default settings in Windows 10 using Windows Security settings or Control Panel.

Картинка с сайта: www.wikihow.tech

Press Win + I (that’s an uppercase i) to open Settings, then click Update & Security > Windows Security > Open Windows Security.
Картинка с сайта: www.wikihow.tech

It’s in the tile with the signal icon.
Картинка с сайта: www.wikihow.tech

This will restore any changes you’ve made to the default settings for Windows Defender.

Картинка с сайта: www.wikihow.tech

You can search for this by pressing the Windows key then typing «Control Panel» and then clicking the app result.
Картинка с сайта: www.wikihow.tech

It’s next to an icon of a brick wall in front of a globe.
Картинка с сайта: www.wikihow.tech

You’ll need to click Restore defaults again when prompted, then click Yes to confirm. Once you have done that, your default settings will be restored to your Windows Defender settings.^[1]