Table of contents
- What Is the Code 10 Error in the Device Manager?
- How to Fix the Intel Management Engine Interface on Windows 10
- Reboot Your PC
- Run the Hardware and Devices Troubleshooter
- Apply Windows 10 Updates
- Update the Intel Management Engine Interface Drivers
- Remove and Reinstall the Drivers Manually
- Run a System Scan
- Update BIOS
- Conclusion
The Intel Management Engine Interface (IMEI) is a built-in driver that allows communication between your device’s OS and the IME firmware. The driver activates some specialized/dedicated features on your motherboard, allowing you to control your PC remotely. It also works for a computer that’s powered off or doesn’t have an operating system installed. However, when your IMEI driver fails, you lose access to its functionalities. Instead, you get a question or yellow exclamation mark when you view the driver from the Device Manager. Now, when you open its properties, you’ll see the Error Code 10. It is often accompanied by a message that says, “This device cannot start. (Code 10).” Do you want to learn how to fix Intel Management Engine Interface issues? If so, keep reading.
What Is the Code 10 Error in the Device Manager?
The Code 10 error appears when the Device Manager cannot start a piece of hardware due to corrupted or outdated drivers. It’s a general error message that pertains to unspecified hardware or driver issues. It can appear on any Windows version, including Windows 7, 8, or 10. It’s common to removable devices, and it occurs when Windows fails to run a piece of hardware like a flash drive or printer. If the IMEI problem led to the Error Code 10, you need not worry. Fortunately, we’ve compiled available solutions to the “Intel Management Engine Interface device cannot start” error. Let’s examine them one after the other.
How to Fix the Intel Management Engine Interface on Windows 10
-
Reboot Your PC
This is a basic troubleshooting step that clears many simple computer issues, including Code 10 errors. All it takes is a simple restart. What’s more, it saves you the time and energy needed to try out other advanced methods. Always take this basic troubleshooting step before trying out the more advanced ones. Simply restart your PC and try accessing the device again. If the error message reoccurs after this, try the more advanced troubleshooting steps below.
-
Run the Hardware and Devices Troubleshooter
Windows has several automated troubleshooters that help solve various issues. An example is the Hardware and Devices Troubleshooter. It helps resolve driver-related problems, so it’s worth giving a try whenever you run into the error code 10 issue. However, Microsoft has removed this utility from its Troubleshoot menu on Windows 10. Luckily, you can access the utility via the Command Prompt or PowerShell. Follow the steps below to access the Hardware and Devices Troubleshooter using the Command Prompt or PowerShell:
- Press the Windows key + X to launch the Power User menu.
- Now, click on the Command Prompt (Admin) or Windows PowerShell option from the menu to open the corresponding console. Enter the following command line after that and hit the Enter button:
msdt.exe -id DeviceDiagnostic
That will open the Hardware and Devices Troubleshooter in a new window.
- After that, click Next and follow the on-screen instructions to complete the troubleshooting process. Once the wizard completes, it will notify you of any issues found. It will also show you the results of its attempt to fix the issues.
If this doesn’t work, try the next solution.
-
Apply Windows 10 Updates
Windows system updates include patches that can help fix problems associated with the Intel Management Engine Interface drivers. So, if you have pending updates, follow the on-screen instructions to apply the updates as soon as possible. Here’s how to do that:
- Press the Windows + X shortcut to launch the Windows Power User menu.
- Now, click on Settings from the menu to launch the Settings window.
Alternatively, press Win + I to launch the app.
- From there, click on Update and Security. That will take you to the Windows Update tab.
- After that, click on the “Check for updates” button. Windows will search for updates automatically.
- If found, apply the updates and restart your Windows 10 computer.
Note: If the “Intel Management Engine Interface device cannot start” error started after a system update, you can remove that update from your PC. Here’s how to uninstall a recent Windows 10 update:
- Press the Windows key + X to launch the Power User menu.
- Now, click on Settings from the menu to launch the Settings window.
Alternatively, press the Windows key + I to launch the Settings window.
- From there, click on Update and Security. That will take you to the Windows Update tab.
- Now, click on “Advanced options” on the right window pane.
- After that, navigate to the “View your update history” link and click on it.
- In the next window, you’ll see a list of applied Windows 10 updates on your PC.
Select the latest update to uninstall it.
- Once done, restart your PC and check to see if the IMEI error persists.
-
Update the Intel Management Engine Interface Drivers
Often, when device hardware fails or misbehaves, it’s due to a corrupted or outdated driver. You can correct that by updating the driver manually or automatically. You can update your Intel Management Engine Interface drivers manually by following the steps below:
- Press the Windows key + X to launch the Power User menu.
- Then, click on Device Manager from the menu list.
- From the Device Manager window, locate and expand the “System devices” category.
- Then, find and right-click on the Intel Management Engine Interface and select “Update Driver” from the pop-up menu.
- After that, select the “Search automatically for drivers” option.
- Once the update is complete, reboot your PC and see if that resolved the Code 10 error issue.
Note: The automatic update option will not work if you’ve disabled the feature in your device installation settings. Besides, you can only update one driver at a time. You can also manually update your IMEI driver by downloading its most recent version from the manufacturer’s official website. However, failure to download drivers that are compatible with your Windows 10 variant will lead to a waste of time and effort. Alternatively, you can download a trusted third-party app such as Auslogics Driver Updater. Use it to update or reinstall your GPU drivers. It’ll also scan your device for other driver-related issues and apply the appropriate fix to each problem. It’s a fast, safe, and intuitive tool that ensures smooth hardware operation without conflicting with other applications. What’s more, it can update multiple drivers simultaneously, saving you time and effort. You get to enjoy all these benefits at an affordable price.
-
Remove and Reinstall the Drivers Manually
If updating the drivers does not work out for you, you can remove the drivers from your computer and reinstall them manually afterward. That will help fix incompatibility issues and other similar problems, like internal corrupted files. Here’s how to go about it:
- Press the Windows + X shortcut to launch the Power User menu.
- Then, click on Device Manager from the menu list.
- From the Device Manager window, locate and expand the System Devices category.
- Then, find and right-click on Intel Management Engine Interface and select Uninstall from the pop-up menu. Wait for the process to complete. You can also uninstall other related apps or files through the Control Panel.
- After that, search for and download the compatible IMEI driver version from your manufacturer’s official website.
- Run the executable file and follow the on-screen instructions to install the driver.
- Once done, restart your computer and check to see if the issue persists.
-
Run a System Scan
You can fix the error automatically by running System File Checker. SFC is a Windows troubleshooting utility that scans and automatically fixes core system errors. Here’s how to use the utility:
- Press the Windows key + X to launch the Power User menu.
- Now, click on Command Prompt (Admin) from the menu to open the elevated Command Prompt console. Enter the following command line and hit the Enter button:
sfc /scannow That will initiate a system scan, which may take a while to complete (depending on the size of your system files).
- Reboot your PC after the scan and check to see if that resolves the “Intel Management Engine Interface device cannot start” error.
-
Update BIOS
If the troubleshooting steps mentioned above failed to resolve the “Intel Management Engine Interface device cannot start” error, try updating your BIOS. Depending on your manufacturer and motherboard, you can automatically download and install the latest update through the BIOS. Otherwise, you’ll have to download it from your manufacturer’s official website and then install it manually. Hopefully, this last solution will help resolve the “Intel Management Engine Interface device cannot start” error on your Windows 10 PC.
Conclusion
The fixes discussed above should help fix the Intel Management Engine Interface driver Error Code 10 on your computer. Was this guide helpful? Please leave a comment below. Don’t forget to share this post and check our guide for more Windows 10 tweaks.
-
Home
-
Partition Manager
- 5 Ways to Fix Intel Management Engine Interface Driver Code 10
By Amy | Follow |
Last Updated
If you are bothered by the Intel Management Engine Interface driver code 10, pay attention to this post now! MiniTool shows you 5 troubleshooting methods to fix it. You can try them one by one until the issue is solved.
Way 1: Update the Intel Management Engine Interface Driver
Step 1: Open the Run window by pressing Windows and R keys.
Step 2: Type devmgmt.msc and press Enter to open the Device Manager window.
Step 2: Expand the System devices option by double-clicking on it.
Step 3: Find and right-click on Intel Management Engine Interface, and then click Update driver.
Step 4: In the prompted window, select a way to update the chosen driver. To update the driver automatically, tap the Search automatically for drivers option. If you want to manually update the driver, click Browse my computer for drivers.
Way 2: Uninstall and Reinstall Intel Management Engine Interface Driver
Try uninstalling and reinstalling the driver if the Intel Management Engine Interface driver code 10 still appears after you update the driver. This operation can solve system incompatibility issues and other similar errors. Here’re the steps to remove and reinstall the Intel Management Engine Interface driver.
Step 1: Open Device Manager and then navigate to the Intel Management Engine Interface driver.
Step 2: Right-click on that driver and click Uninstall device.
Step 3: In the pop-up window, click Uninstall to confirm the operation.
Tips:
You can also uninstall other related apps or files in Control Panel > Programs and Features. Right-click on the target apps and click Uninstall.
Step 4: After finishing the uninstallation operation, go to the official website of your driver’s manufacturer and then download the driver.
Step 5: Run the downloaded executable file and follow the on-screen instructions to install the driver.
Step 6: Check if the Windows 10 Intel Management Engine Interface error is solved.
Way 3: Perform a System Scan
Since Intel Management Engine Interface driver code 10 could be caused by corrupted system files, you should perform a system scan after the issue occurs. Well, both SFC and DISM can help you detect and fix corrupted system files on the computer. You just need to run them to scan and fix potential core system errors on your PC.
Step 1: Type cmd in the search box and then click Run as administrator under the Command Prompt App section.
Step 2: In the elevated window, type sfc /scannow and hit Enter to start the process. You need to wait patiently until the process ends.
Step 3: After this command is completed, type the command below and press Enter.
dism /online /cleanup-image /restorehealth
Step 4: Likewise, wait for the finish of the process.
Way 4: Update Windows
As you know, Microsoft often releases new Windows updates to add new features and bug patches to the known issues in previous versions. Hence, installing new Windows updates can solve some errors. You can try this way to fix the Intel Management Engine Interface driver code 10.
To do that, simply follow these steps.
Step 1: Open Settings by pressing Windows and I keys.
Step 2: Click Update & Security in the main interface of Settings.
Step 3: Tap Check for updates under the Windows Update section. Then it will list available Windows updates to you.
Step 4: Click Download and Install to get the update installed.
Way 5: Update BIOS
If the Windows 10 Intel Management Engine Interface error still persists, try updating the BIOS to fix it. The steps to update BIOS are different according to your motherboard manufacturer. Therefore, you should move to the official website of your motherboard and download & install the BIOS update by following the given instructions.
Tips:
For the sake of your system safety, you should make a backup for your system before starting the process.
Once down, restart your computer to see if the Intel Management Engine Interface driver code 10 disappears. If possible, you can also download and install the latest BIOS update automatically.
Bonus Tip:
For issues related to hard disks or partitions, you can download and install MiniTool Partition Wizard to fix them. For instance, it can fix partitions not showing up, C drive low space, hard drive is full without reason, and so on.
About The Author
Position: Columnist
Having writing articles about computer tech for a long time, I am rather experienced especially on the aspect of computer optimization, PC enhancement, as well as tech terms explanation. The habit of looking through tech forums makes me a great computer issues collector. And then, many articles related to these issues are released, which benefit plenty of users. Professional, effective, and innovative are always the pursuit of an editing worker.
Intel Management Engine Interface is an embedded microcontroller integrated on Intel Chipsets which provides or activated variety of features and services such as enabling your system to control remotely even if your system doesn’t have any operating system or even if your system is turned off. This feature helps you to do all such functions easily. Intel Management Engine Interface is located in the Platform Controller Hub of modern Intel motherboards. So called error Fix Intel Management Engine Interface Code 10 can be occurred due to carious reasons.
So that’s enough about the introduction and role of “Intel Management engine Interface” We are here to fix an error showing an Yellow exclamation mark or question mark against the Intel Management Engine Interface driver. When you double click on it to open it’s properties you will get the error code 10 which usually indicates the driver error code.
Fix Intel Management Engine Interface Code 10 by Three Methods –
Here is the brief video tutorial to “Fix Error in “Intel Management Engine Interface” driver in Windows 10
#Method 1 – Fix Intel Management Engine Interface Error (This Device Cannot Start Code 10) By Updating Drivers
Sometimes, wrong or faulty drivers are responsible for getting code 10 in your Intel Management Engine Interface. So in this method we are going to update your drivers from the scratch.
Simultaneously press Windows key + R key to open the run command in your system. Now type “devmgmt.msc” and hit the enter key to open device manager of your system
In Device Manager, look for”Intel Management Engine Interface” under “System Device”
This is where we going to update your system driver for the hardware. Here click on “Update driver” option by right clicking on “Intel Management Engine Interface” and choose the option “Update Driver”
Once you click on “Update Driver” a small window will open.
Here in the very first option, choose “Browse my computer for drivers” to proceed
In next step choose the option “Let me pick from a list of available drivers on my computer”
Now it will guide you and provide you the available driver for your system. Choose your driver and click on the next button to continue
Now after that you driver will be installed automatically as shown below.
Now close the installation windows and again choose your device manager window.
This time click on the “Action” tab and select “scan for hardware changes”
it will take few seconds to scan the changes. After completing the process restart your system and check if error still persists or not.
#Method 2 – Fix Intel Management Engine Interface Error (This Device Cannot Start Code 10) Using DISM & System File Checker
Sometimes the error may occur due to corrupted system files. There corrupted system files halt the windows update files which cause the above said. So in order to fix the issue we have to repair there corrupted system files.
Click on Start menu and type cmd and choose “Command Prompt as Administrator” to open the command prompt
once command prompt is open you need to type here following command and hit the enter button.
Sfc /scannow
Please wait as time command will upto 30 minutes to process depending upon the speed of your PC
Once this command is completed, do not exit the command. This time type another command :
dism /online /cleanup-image /restorehealth
once typed the command again hit the enter button and wait patiently until the process is completed
Once the process is completed to 100% please exit the command prompt and restart your PC for the changes to take effect.
Now again check for Intel Management Engine Interface.
#Method 3 – Fix Intel Management Engine Interface Error (This Device Cannot Start Code 10) by Downloading Official Drivers
If above two methods fails to work than we are only left with installing the drivers by downloading the drivers from the official Intel website.
New updated drivers will help you out to rescue from this annoying error it’s because the drivers that got updated with windows are sometimes not relevant and includes bugs in it. So we will download the drivers from official Intel website and than install them in your system.
Open the web browser such as google chrome or internet explorer and click on the link below to open Intel official driver download page.
Click here
On driver page you are welcome with the filters so that you can easily choose your operating system whether it’s Windows 10, Windows 8 or Windows 7. Choose your architecture type between 32 bit and 64 bit.
Once choose your Windows type, website will show you available driver as shown below. Now click on the link on the webpage to open the download page for that particular driver.
Now click on the “Download” tab as shown below in the image to download the driver in your system. The size of driver varies between 250Mb to 350Mb depending upon the type of operating system you have in your pc.
After finishing the download install the driver in your system. Simply double click on the installer program and follow the onscreen guidelines to complete the installation of “Intel Management Engine Interface” driver in your system.
Now restart your system to make sure the changes takes effect. After restarting your PC is ready to work and your problem of “Intel Management Engine Interface” error will be resolved by now.
That’s all folks. These are the three possible ways for the Resolution. In the above article I tried to solve your problem of Intel Driver in which you got the error “This device cannot start code 10”
Hello, it’s been a while that the driver Intel Management Engine Interface has error code 10 (Status_device_power_failure) I tried many ways to solve it but it still has this error and as a result I have issues in my sleep mode and also booting. My laptop restart after I try to awake it from sleep mode. Also when I want to turn on my laptop it takes longer than usual and the mouse and keyboards connected to the laptop turn on and off several times. I don’t know if it’s related to the intel 8 series c220 drivers or any PCI related driver or it’s something related to Intel Management Engine Interface driver itself.
I tried all these to solve it but none helped:
— sfc /scannow — DISM check and restore health — BIOS reset — CMOS battery removal and replacement — In-place upgrade of Windows — Reinstalling Windows using a bootable flash drive and formatting all partitions (I tried many different windows 10 versions but still I got the error and issues) — Driver updates — Uninstalling and reinstalling the mentioned driver (different versions 9,10,11, 11.7 and etc.) — Downgrading BIOS version.
Only when my laptop is off for some days or when I release all it’s electricity by pushing power button several seconds The issue seems to disappeared but after a restart it comes back. my laptop is HP Probook 450 G1 with windows 10 64bit.
Microsoft support team couldn’t help and even I sent this issue details to Intel Support team and they said I should get in touch with the manufacturer of my laptop.
Overview:
- What is Intel Management Engine Interface Driver
- How to Download Intel Management Engine Interface Driver
- Fix Intel Management Engine Code 10 Error
When you find the Intel Management Engine Interface shows a yellow exclamation mark in the device manager. When you see the driver details, it shows the code 10 error: This device cannot start.
This article aims to help you update the Intel Management Engine Interface driver and fix the Intel MEI Code 10 error.
What is Intel Management Engine Interface Driver?
Intel Management Engine Interface is also called Intel MEI, which is a chip thermal management driver launched by Intel for its chipset.
Like the firmware and the system driver, it works similar to an interface. Through this interface, the system can interact with the firmware to improve thermal energy management.
How to Update Intel Management Engine Interface Drivers?
There are two common ways that you can use to download and update all drivers for your laptop and desktop. As for the Intel chipset devices, you can also follow the next two methods.
Method 1: Update Intel Management Engine Interface Drivers Automatically
Automatically solving computer problems is definitely a recommended method. If you have no experience downloading or updating drivers and don’t want to waste time, you can choose this method.
Driver Booster is a professional driver tool which can help you detect all your devices including the internal and external hardware and then find the latest drivers automatically. With this software, you can get the latest Intel Management Engine Interface drivers for your Windows 10, 8, 7 (64 bit and 32 bit) system.
1. Download, install and run Driver Booster on your laptop or desktop.
2. Click Scan. After that, Driver Booster will start scanning all the current devices including the Intel chipset model and compare it with the latest version.
3. Find the System Device, select Intel Management Engine Device, click Update You can also click Update Now button to update all drivers with one-click.
Method 2: Download Intel Management Engine Interface Driver Manually
Some people will select this way because they may think downloading Intel MEI drivers from the official site will be safer. If you have time and knowledge about installing drivers by yourself, this is also a good choice.
1. Goes to Intel(r) Management Engine Interface driver downloading page. This is the direct downloading page from the official site. In this page, you will see the striking title about downloads for Intel(R) Management Engine Interface (Intel r MEI).
2. Here you will see different Intel MEI drivers for Windows 10, 8, 7. Of course, you can select the system as you like.
For example, click the link of Intel Management Engine driver for Windows 8.1 and Windows 10. Here from the OS item you will see that this driver supports Windows 10 (64 bit and 32 bit) and Windows 8.1 (64 bit and 32 bit).
3. On this page, you will see the detailed downloading information about the Intel MEI driver. Click Download button to download the driver. You will see the driver file is ME_SW_1909.12.0.1236.zip.
On the right side, you will see this driver supports 6th, 7th, 8th Generation Intel(R) Core Process Family.
4. Extract the installation package, find the setup file, and double-click the file to install the driver.
How to Fix Intel Management Engine Interface Code 10 Error
Why does this part appear here? Because the code 10 error for Intel Management Engine Interface in device manager is related to the drivers and the solution is uninstall and reinstall the driver.
So when the error code 10 for this Intel MEI device appears, you can follow the next steps.
1.Open Device Manager.
2. Expand System Devices and find Intel Management Engine Interface, right-click to select Uninstall device. Some computer may show in Other Devices.
3. In Uninstall Device interface, select the check box Delete the driver software for this device, and click Uninstall button.
4. Follow the above two methods to reinstall Intel Management Engine Device driver.
Conclusion:
As a subsystem that can manage the thermal drive of the chip and can complete some tasks independently, the Intel management Engine Interface driver needs to be kept up to date. And if a code 10 error occurs, you need to uninstall the original driver and reinstall it.