Error windows network winsock is not properly configured to work with proxifier - Windowsa.top

Configuring Windows Network

When Proxifier is installed, the Windows network is automatically configured
to work with it. But if the Windows network configuration is not properly done
for some reason and the following message is displayed when you try to launch
Proxifier:

«Fatal error: Windows Network is not properly configured to work with
Proxifier. Please, run NetConf to configure.»

Please, run the application NetConf.exe — Start->Programs->Proxifier->Network
Configurator. This application will help you quickly configure Windows
Network for working with Proxifier. In some cases you will have to restart your
computer after that.

Источник

Asked By

10 points
N/A
Posted on — 02/27/2014

Hi Pro,

I am getting this error message like loop. I am not able to work with the Proxifier I configured it to my knowledge. I think it was good but I am getting this error. Not able to find the root cause of this error. If I try to fix this problem automatically I am getting this error again. This is not helping me, what will I do now? Thanks.

Error: Windows network (WinSock) is not properly configured to work with Proxifier.

Do you want to fix this problem automatically?

Answered By

cyrilsia01

1065 points
N/A
#182160

You can try to repair and reset Winsock. To do this, follow the methods below:

A. First of all, you need to ensure that your hardware are working properly and that you do not have any damaged or corrupt files. You need to update your drivers regularly.

1. Scan your computer for viruses, trojans and spyware.

2. Run chkdsk /f /r to check your disk for errors.

3. Run sfc.exe /scannow to check your system files for errors.

4. Install the latest updates.

B. Try to reset and renew your TCP/IP. Go to your command prompt and run the following:

Ipconfig /release

Ipconfig /renew

This will only work if your adapter is set to DHCP. DHCP will automatically assigned an IP-address.

C. Lastly, you can try to repair and reset the Winsock Catalog. Run the command below:

Netsh winsock reset catalog (to reset winsock entries)

Netsh int ip reset.log hit (to reset the TCP/IP stack)

Windows network (WinSock) is not properly configured

When you install Proxifier, the Windows network is automatically configured to work with it. But if the Windows network configuration is not done properly for an unknown reason, you may receive “Fatal error: Windows Network is not properly configured to work with Proxifier. Please, run NetConf to configure” when you start Proxifier. To fix this error, you need to run NetConf or the NetConf.exe program.

To run the program, click “Start”, “All Programs”, “Proxifier” then select “Network Configurator”. This will help you configure the Windows network to work with Proxifier. Just restart your computer if you are prompted. If you have an existing license, go to Proxifier to download the latest proxy client. You can also download the free trial which works for 31 days.

The latest version at the moment supports Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8.x, and Windows 10. For servers, it supports Windows Server 2003, Windows Server 2008, Windows Server 2012, and Windows Server 2016.

Источник

Windows Proifier reports an error

tags: windows proxifier proxy

Error message

[06.21 23:03:15] Error: Windows network (Winsock) is not properly configured to work with Proxifier. [06.21 23:03:15]
 Proxifier or some of its parts may work incorrectly. [06.21 23:03:15] 
 It is highly recommended that you run SysSettings tool to address this problem.

solve

Open the

Intelligent Recommendation

Windows 10 installs MySQL 8 and reports error 1045

I have found someone who is interested in this article. If you also encounter this problem, then follow the online content and try again, then try mine Step 1 uninstall https://blog.csdn.net/sxingming…

More Recommendation

Источник

#1 23-07-2009 10:16:54

Проблема с прокси

нажимаю на проху он мне пишет
«Fatal error: Windows Network is not properly configured to work with Proxifler. Please run NetConf to configure.»
как то так. запускаю нетконф. он долю секунды думает чёто делает и у меня браузер потом неработает(експлоер). после перезагрузке компа всё заново делаю.
Помомгите

Здесь стоит мой текст. Жалко что ты потерял своё время на прочтение это не интеллектуального текста.

Неактивен

#2 23-07-2009 13:36:34

Re: Проблема с прокси

В меню пуск, в папке проксифаера выбери пункт «network Configurator», в нем нажми «Далее» и сеть настроится для проксифера.

Неактивен

#3 15-11-2010 11:01:55

Re: Проблема с прокси

короче проблема следующая: временами не хочет работать uTorrent. становится сидов по нулям, скачка/закачка отсутствует.
после танцев с бубном над проксифером все это дело вроде начинает работать, но я так и не понял что конкретно надо делать
помогите решить проблему
пс. пользуюсь не товеровской проксей

Отредактированно Ofigenski (15-11-2010 11:05:25)

транслятор трансляций
император микса

Расписание матчей

Неактивен

Источник

Proxifer của mình bị như thế này, có pro nào giúp mình với

04.06 14:29:51]
[04.06 14:29:51] Welcome to Proxifier v3.21
[04.06 14:29:51]
[04.06 14:29:51] Error: Windows network (Winsock) is not properly configured to work with Proxifier.
[04.06 14:29:51] Proxifier or some of its parts may work incorrectly.
[04.06 14:29:51] It is highly recommended that you run SysSettings tool to address this problem.

có pro nào vào giải quyết hộ với

có pro nào vào giải quyết hộ với

Lỗi:
03.13 12:28:49] Error: Windows network (Winsock) is not properly configured to work with Proxifier.
[03.13 12:28:49] Proxifier or some of its parts may work incorrectly.
[03.13 12:28:49] It is highly recommended that you run SysSettings tool to address this problem.

Hướng dẫn:

Tắt hẳn Proxifier (Icon Tray > Chuột Phải > Exit)
Đi tới : C:\Program Files (x86)\Proxifier
Chạy SysSettings32, nhấn Reset Winsock Settings, Exit
Chạy lại SysSettings32, nhấn Install, Exit
Chạy SysSettings64, nhấn Reset Winsock Settings, Exit
Chạy lại SysSettings64, nhấn Install, Exit
Khởi động lại Proxifier > OK

Chúc bạn thành công!

Ngưồn: https://ibotvn.com/fix-loi-proxifier.t145/

Xóa đi cài lại nha, đã từng bị và dùng cách trên không được

Lỗi:
03.13 12:28:49] Error: Windows network (Winsock) is not properly configured to work with Proxifier.
[03.13 12:28:49] Proxifier or some of its parts may work incorrectly.
[03.13 12:28:49] It is highly recommended that you run SysSettings tool to address this problem.

Hướng dẫn:

Tắt hẳn Proxifier (Icon Tray > Chuột Phải > Exit)

Đi tới : C:\Program Files (x86)\Proxifier

Chạy SysSettings32, nhấn Reset Winsock Settings, Exit
Chạy lại SysSettings32, nhấn Install, Exit

Chạy SysSettings64, nhấn Reset Winsock Settings, Exit
Chạy lại SysSettings64, nhấn Install, Exit

Khởi động lại Proxifier > OK

Chúc bạn thành công!

Ngưồn: https://ibotvn.com/fix-loi-proxifier.t145/

Xóa đi cài lại nha, đã từng bị và dùng cách trên không được

thank các pro, để em thử

Xóa đi cài lại nha, đã từng bị và dùng cách trên không được

Sao em fake sang ip US tốc độ mạng toàn <20kb/s, mấy bác có bị thế không giúp em vs, 2 hôm trước còn dùng bình thường

Источник