Elan fingerprint driver windows 11

Applies ToWindows 11

This article describes the problem addressed by the troubleshooter, what it does to mitigate them, and the conditions that can cause it to run. For more information about troubleshooting, see Keep your device running smoothly with recommended troubleshooting.

What problem does this troubleshooter address?

Some user machines that have upgraded from Windows 10 and are now running Windows 11, version 21H2 or higher which have a fingerprint sensor with certain ELAN fingerprint drivers could encounter a failure or crash when using applications which rely on related DLLs.

Which drivers are these?

The drivers are the ELAN fingerprint driver, version 3.10.11001.10606, 3.10.11001.10502, or 3.10.11001.10801, and the affected DLL has the filename onnxruntime.dll with either no version number or one of 0.0.0.0.

How does the troubleshooter mitigate the problem?

We have a workaround which is validated and involves running the system command: sfc /scannow. This command scans and repairs corrupted or broken files on the device. The troubleshooter will simply run the command as a process.

When does the troubleshooter run?

The troubleshooter runs automatically on devices that have upgraded from Windows 10 to Windows 11, are running Windows 11 build 22000 or higher, and have one of the driver versions and the DLL mentioned above. It cannot be run manually. Check recommended troubleshooting history to see if this troubleshooter has been run on your device by going to Start > Settings > System > Troubleshoot > Recommended Troubleshooter History and looking for the following:


Hardware and devices troubleshooter

Automatically repair system files and settings to fix a problem on your device

How can I apply this workaround manually?

If the troubleshooter has not run, mitigate the issue by following these steps:

  1. Select the Start button and type cmd.

  2. Long-press (or right-click) on Command Prompt and select Run as administrator.

  3. Type or copy and paste the following command into the Command Prompt dialog:

    sfc /scannow

  4. If you wish to verify that the onnxruntime.dll file has been repaired, navigate to C:\Windows\System32 (or the equivalent of where the System32 folder is located on your device), long-press (or right click) on onnxruntime.dll, and select Properties.

  5. In the Properties dialog, go to the Details tab. Verify that the File Version is not 0.0.0.0 or blank. If so, then it’s been fixed and your applications utilizing onnxruntime and/or Windows ML should run as expected.

Need more help?

Want more options?

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Поиск по ID

Elan Fingerprint Sensor Drivers v.3.21.12212.13102 Windows 10 / 11 64 bits

Подробнее о пакете драйверов:

Тип: драйвер

Имя: Elantech Fingerprint Sensor Drivers
Производитель: Elantech
Версия драйвера (программы установщика):
3.21.12212.13102, 5.4.32720.1020
Операционная система:
Windows 10 Windows 11
Разрядность ОС:
64-bit (x64)
Размер файла: 5 mb
Дата выхода: 2023-01-12

Elantech Fingerprint Sensor Drivers. Характеристики драйвера

Драйвер для тачпадов от компании Elantech (Lenovo). Предназначен для автоматической установки на Windows 10 и Windows 11.

Поддерживаемые устройства: Lenovo ThinkPad E14 Gen 3, Lenovo ThinkPad E15 Gen 3, Lenovo ThinkPad E14 Gen 4.

Версии драйверов:

  • ElanFwUpd_component.inf — v.5.4.32720.1020 от 11.01.2023
  • ElanFwUpd_extension.inf — v.5.4.32720.1020 от 11.01.2023
  • WbfUsbDriver.inf — v.3.21.12212.13102 от 12.01.2023

Внимание! Перед установкой драйвера Elantech Fingerprint Sensor Drivers рекомендутся удалить её старую версию. Удаление драйвера особенно необходимо — при замене оборудования или перед установкой новых версий драйверов для видеокарт. Узнать об этом подробнее можно в разделе FAQ.

Скриншот файлов архива

Скриншоты с установкой Elantech Fingerprint Sensor Drivers

Файлы для скачивания (информация)

Поддерживаемые устройства (ID оборудований):

Другие драйверы от Elan

Сайт не содержит материалов, защищенных авторскими правами. Все файлы взяты из открытых источников.

© 2012-2025 DriversLab | Каталог драйверов, новые драйвера для ПК, скачать бесплатно для Windows
kamtizis@mail.ru
Страница сгенерирована за 0.040742 секунд

ELAN Fingerprint is one of the most popular USB fingerprint biometric devices that works flawlessly on Windows 10. However, while upgrading your OS from Windows 10 to Windows 11 or a fresh install of Windows 11 breaks the fingerprint device.

The solution to the same is to install Windows 11 compatible drivers for ELAN Fingerprint USB Device. The problem is that the drivers aren’t easily available.

After doing a bit of research I was able to find the compatible drivers along with the tested outcome.

Click here to download the drivers and follow the steps below.

Download the Cab file, and extract the cab file with the help of Winzip, 7Zip, or Winrar.

Run the Setup.exe file, and let it install the drivers.

Once installed, click on Start and type Device Manager.

Once opened, expand Biometric Devices > Fingerprint and right-click on it.

Click on Update Driver, Browse my computer for drivers, and

Select Let me pick from a list of available drivers on my computer

You should now see ELAN Smart–id Fingerprint, click on it and select Next.

After that it should say successfully installed the driver as shown in the below screen:

Congratulations you are now able to use the ELAN Fingerprint scanner (USB) and can now register your finger with the help of Windows Hello.

Leave a comment for any issues while following the above steps.

As Windows 10 users migrate to Windows 11, the potential for hiccups during this transition has become a hot topic amongst tech enthusiasts and casual users alike. One particular issue centers around the ELAN fingerprint driver, which has caused disruptions for some users when relying on applications that utilize specific DLLs. To address this, Microsoft has rolled out the ELAN fingerprint driver troubleshooter, designed to assist simultaneously both seasoned techies and those who fear breaking their devices more than their New Year’s resolutions.

A workstation displaying digital fingerprint analysis software on a computer monitor.

What Problems Does This Troubleshooter Tackle?

Identified primarily on systems upgraded to Windows 11 version 22000 or later, the troubleshooter attempts to rectify situations where devices with ELAN fingerprint sensors face system crashes or failures while running related applications. The culprit appears to be tied to certain versions of the ELAN fingerprint driver—namely versions 3.10.11001.10606, 3.10.11001.10502, and 3.10.11001.10801. The associated DLL in question is onnxruntime.dll, which may show either no version number or display a version of 0.0.0.0. This technical jargon might sound dizzying at first, but bear with me—after all, it’s just a headache waiting to happen for users diving into Windows 11.

How Does the Troubleshooter Address These Issues?

Now, here’s the practical part—what exactly does this troubleshooter do? Essentially, it leverages the command-line utility known as sfc /scannow. Sounds fancy, right? In simpler terms, this command scans and repairs any corrupted or broken files, effectively putting your system back on its feet. Imagine a knight in digital armor galloping in to rescue your applications before they crash and burn!
This troubleshooter runs automatically for eligible devices that meet the specified conditions. However, it keeps a lower profile than your high school crush—there’s no manual activation option. Users need to check their Recommended Troubleshooter History by going to Start > Settings > System > Troubleshoot > Recommended Troubleshooter History. If the troubleshooter has activated, look for the entry tagged ‘Hardware and devices troubleshooter.’

Running the Troubleshooter Manually (Just in Case)

Should you find yourself in a corner where the troubleshooter hasn’t kicked in, fear not! There’s a workaround that even your tech-avoiding uncle could follow. Here’s a simple guide to flow through the manual steps:

  • Open Command Prompt as Administrator:
  • Click the Start button and type cmd.
  • Right-click on Command Prompt and choose Run as administrator.
  • Execute the Repair Command:
  • Type or copy and paste the following command into the Command Prompt dialog:
  • Verify DLL Repair:
  • Navigate to C:\Windows\System32, find onnxruntime.dll, right-click, and select Properties.
  • Head to the Details tab. If the File Version isn’t listed as 0.0.0.0, congratulations! That means it’s been fixed, and your applications should now run smoothly.

Why This Matters for You

The advent of Windows 11 has introduced a slew of features alongside potential pitfalls like the one mentioned here. Having a clear understanding of the ELAN fingerprint driver troubleshooter ensures you’re well-equipped to combat issues related to fingerprint recognition.
For users relying on such authentication methods, smooth sailing is essential—not merely a nuisance, but a crucial element of using modern technology with ease. By being proactive and knowing about tools like the troubleshooter, you can mitigate risks before you arrive at your next tech meltdown.

Conclusion

As Windows 11 continues to solidify its position in the computing world, understanding the tools and procedures at your disposal, like the ELAN fingerprint driver troubleshooter, is imperative. This troubleshooting guide not only simplifies the complex web of driver interactions but arms you with the knowledge to resolve issues swiftly. Embrace the change, keep your drivers updated, and don’t let technical snags slow you down!
Remember, the beauty of technology lies not just in its complexity, but in our ability to navigate it with confidence!
Source: Microsoft Support About the ELAN fingerprint driver troubleshooter for devices upgrading from Windows 10 to Windows 11 — Microsoft Support

Info:

Model: Elantech Fingerprint Sensor Driver
Vendor: Elantech
Version: 3.2.12011.10054
Operating system: Windows 10, Windows 11
Bits: 32-bit (x86), 64-bit (x64)
Driver Date: 2023-04-10
Size: 20,00 mb

Driver description

Download driver Elantech Fingerprint Sensor Driver version 3.2.12011.10054 for Windows 10, Windows 11 32-bit (x86), 64-bit (x64).

Screenshot of files

File Name

elan_fingerprint_3.2.12011.10054_hp.zip — v.3.2.12011.10054 (20.0 mb)

Link to file:

Please, enter the answer to the following question

Понравилась статья? Поделить с друзьями:
0 0 голоса
Рейтинг статьи
Подписаться
Уведомить о
guest

0 комментариев
Старые
Новые Популярные
Межтекстовые Отзывы
Посмотреть все комментарии
  • Подключение ноутбука к телевизору через wifi windows 11
  • Elan драйвер для тачпада windows 11
  • Windows delete file cmd windows
  • Как установить видеодрайвер на windows 10 нвидиа
  • Hkey local machine software microsoft windows nt currentversion networklist profiles