Learn how to fix C Stage 1 stuck in Windows 10 with a simple reboot and registry fix. Follow our step-by-step guide to resolve it.
This guide will walk you through steps for fixing C Stage 1 stuck and getting your PC back to running smoothly. We will cover how to reboot and skip disk checking and provide an advanced solution using the Registry Editor.
Step 1: Reboot and Skip Disk Checking
The easiest way to resolve the C Stage 1 stuck problem is to reboot your PC and skip disk checking. Here’s how:
- Reboot your PC: During the startup process, when the disk check initiates, you’ll be need to press any key to skip the check.
- Press any key: To bypass the disk check and continue booting Windows.
If you’re unable to skip the disk check or it loops endlessly, let the disk check complete once. Once finished, log into your system. This often solves the problem.
Step 2: Modify Registry Settings to Prevent Future Disk Checks
If your Windows 10 system continues to get stuck at C Stage 1 or C Stage 2, it’s time to adjust some registry settings to prevent this from happening again. But before you start, make sure to create a System Restore point in case anything goes wrong.
Steps to Fix C Stage 1 Stuck Using Registry Editor
- Create a System Restore Point: Always back up your system before editing the registry.
- Open the Registry Editor:
- Press Windows + R to open the Run dialog.
- Type
regeditand hit Enter. - Accept any User Account Control (UAC) prompts to proceed.
- Navigate to the Session Manager Key:
- In the Registry Editor, go to:
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager
- In the Registry Editor, go to:
- Locate and Modify the BootExecute Value:
- In the right pane, find the BootExecute entry. This controls the disk checking process.
- Double-click BootExecute to edit the value. If the current Value data is set to
autocheck autochk *, change it to:autocheck autochk /k:C * - This change will prevent future disk checks for the C drive, fixing the issue for C Stage 1 and C Stage 2 stuck problems.
- Close the Registry Editor and Reboot:
- After editing, click OK and close the Registry Editor.
- Reboot your system and check if the issue is resolved.
What If Your System Gets Stuck on Other Stages?
If your system gets stuck on other stages, such as Stage 2 or Stage 4, similar steps can help you resolve the issue. Modify the BootExecute value in the registry for other drives (e.g., D, F, or G), depending on where the issue occurs.
For example:
- To fix D Stage 1 stuck, modify the BootExecute to:
autocheck autochk /k:D * - Similarly, if you’re stuck on F Stage 1, use:
autocheck autochk /k:F *
Why Is My System Getting Stuck on Disk Checking?
You might be wondering, “Is fixing C Stage 2 bad?” The answer is no—disk checks are designed to repair file system errors, but when they take too long or get stuck, it can be a sign of more serious underlying issues such as disk corruption or hardware failure.
In cases where your PC is stuck on fixing C Stage 2 Windows 10, or even worse, fixing C Stage 2 100% stuck, it may indicate larger problems with your disk that might require advanced tools or professional assistance to resolve
What is Fixing C Stage 1 in Windows 10?
Before diving into the solution, let’s explain what C Stage 1 means. During startup, Windows sometimes runs a disk check to verify the integrity of your hard drive. This process is divided into stages, with C Stage 1 being the first phase. However, the system can sometimes get stuck here, particularly after improper shutdowns or disk errors. This issue can also appear as C Stage 2 stuck or even C Stage 5 stuck for other users.
Conclusion
Fixing C Stage 1 stuck in Windows 10 doesn’t have to be a daunting task. In most cases, simply rebooting and skipping the disk check will resolve the issue.
However, if the problem persists, modifying the registry to prevent unnecessary disk checks will ensure your system starts smoothly in the future.
Remember, always create a System Restore point before making changes to your system, and if problems with disk errors continue, it might be time to check the health of your hard drive.
By following the steps above, you should be able to fix issues like Windows 10 stuck fixing C Stage 2 and even prevent future problems with disk checks.
FAQs
Q1. What is fixing C Stage 1 in Windows 10?
Fixing C Stage 1 refers to the initial phase of disk checking during Windows startup. The system checks for errors on the C drive, but it can sometimes get stuck, causing a delay in booting.
Q2. How do I skip the disk check?
When the disk check starts, you’ll see a prompt to press any key to skip it. Simply press a key to bypass the check.
Q3. Why does my PC keep getting stuck on C Stage 1?
It could be due to disk errors, improper shutdowns, or system corruption. Following the steps in this guide should help resolve it.
Q4. Is it safe to stop disk checking on Windows 10?
Yes, as long as your disk health is good. You can use the registry tweak to prevent unnecessary disk checks.
Now you’re equipped to fix C Stage 1 Windows 10 stuck and enjoy a smoother startup experience!
Also read,
- How to Perform Clean Boot in Windows 11, 10, 8, 7: A Step-by-Step Guide
- How to Solve “There was a problem resetting your PC” Error in Windows 11
- How to Resolve Task Scheduler error 2147943712 in Windows 10
- How to Fix Windows 10 Startup Problems: A Step-by-Step Guide
Visit Our Post Page: Blog Page
When you press the power button on your computer, you expect your computer to boot quickly and without issues. When your computer starts, the Windows OS loader launches critical drivers and the Windows kernel so the boot process can continue. If you’re having recurring boot problems associated with a “Fixing C Stage 1” or “Fixing C Stage 2” error message that causes very long boot times, this guide can help. You’ll learn about the Windows boot process, the CHKDSK utility, and step-by-step directions to fix this problem.
What does Fixing C Stage 1 or Fixing C Stage 2 mean?
Fixing C Stage 1 is an error message that can occur during Windows startup on any type of PC or laptop, including popular brands like HP, Dell, Lenovo, and Asus.
This error message usually reads something like this:
Fixing (C:) Stage 1: 2% (11149 of 511320); Total 1%, ETA 02:45:00
Fixing C Stage 2 is another message that can display during Windows startup. This error message usually reads something like this:
Fixing (C:) Stage 2: 3% (17089 of 512680); Total 23%, ETA 01:22:00
These messages tell you that the Windows operating system is checking your hard drive for errors. The program that is checking your disk is called CHKDSK. Usually, CHKDSK doesn’t even complete a full scan, and Windows will continue to boot, but sometimes the system gets stuck, and the ETA can increase to display a crazy time to finish.
The letter (C:) in the text shows which hard disk is being checked, it’s the C drive in this case. As such, the message on your screen might show a different drive letter, like Fixing D Stage 1 or Fixing E Stage 1. These all indicate the same problem, just on different hard drives.
The Windows boot process
When Windows is booting, it walks through different phases:
- Preboot – In this stage, firmware settings are loaded, and a valid hard drive is identified. Then, the Windows Boot Manager is started.
- Windows Boot Manager – It locates and starts Winload.exe on the boot partition located at %SystemRoot%\system32\winload.exe
- Windows Operating System Loader – Windows kernel is started using the kernel image file located at %SystemRoot%\system32\ntoskrnl.exe
- Windows NT OS Kernel – The kernel loads the registry and any necessary drivers until Smss.exe takes over
If Windows experiences issues during boot, a variety of boot errors are possible. In the case of Fixing C Stage 1 or Fixing C Stage 2, Windows found an issue with the hard disk and started CHKDSK.
What is the CHKDSK Utility?
All modern versions of Windows, from Windows 11 down to Windows XP, includes a program known as Check Disk utility, or simply CHKDSK. CHKDSK’s job is to scan your file system and fix any corruption or logical file system errors. Check Disk also looks for bad sectors of your hard drive. This can be from damage to the drive or poorly written data. Sectors with drive damage are marked for no further use by the Check Disk utility.
CHKDSK has many modifiers that you can use to adjust CHKDSK’s scans. The two most common modifiers are fix and repair, noted by /f or /r:
- CHKDSK /f – Scans the hard disks and tries to repair overhead files. Quicker scan times.
- CHKDSK /r – Scanning takes significantly longer because it’s scanning each individual sector of the drive, looking for corruption AND physical damage. /r includes all /f scan functions.
The problem most users have with CHKDSK is it’s extremely slow. A full disk scan can take hours, and your computer is not usable during this time. If the Fixing C Stage 1 or Fixing C Stage 2 issue occurs randomly when you boot your computer, this can be a major hassle.
What causes the Fixing C Stage 1 or Stage 2 error messages during Windows boot?
Fixing C Stage 1 and Fixing C Stage 2 is about your hard drive, so the causes behind this issue are all linked to your disk and its health. Windows will try to check the disk during Startup for the following issues:
- Read/write errors
- Hardware damage
- Too many bad sectors
- Failing hard drive
- Power failure
How to skip or cancel Fixing C Stage 1 or 2?
Many users have asked how to skip or cancel the Fixing C Stage 1 or Stage 2 screen. If you are one of the unlucky ones and your system gets stuck, you’ll have no option but to follow solution one below to even get past this message.
If your computer is actively checking the disk and the ETA is going down and has not inflated to ridiculous numbers, you should try to let the scan finish. It’s inconvenient, but shutting down your computer to avoid the scanning process can cause more problems. It’s not recommended to try to skip or cancel Fixing C Stage 1 or Stage 2 UNLESS your system is completely unresponsive and not making any progress.
Proven solutions to resolve Fixing C Stage 1 and Fixing C Stage 2 errors
1. Manually restart your computer
Sometimes the “Fixing C Stage 1” or “Fixing C Stage 2” message won’t clear on its own, and your computer won’t continue to boot. You are waiting for hours or even a full day. In this situation, you may have no other choice but to manually restart your computer to force a skip or cancel of (C:) Stage 1 or (C:) Stage 2 fixing.
Note: Generally, it is a BAD idea to interrupt disk scanning in stages 1, 2, or 3. It is much safer to interrupt disk scanning in stages 4 and 5. If you are forced to interrupt during stages 1, 2, or 3, check the hard drive light on the front or top of your computer. The HDD LED is an indicator for disk activity and is usually denoted with a cylinder symbol (#2 in the image below). If this LED keeps lighting up, then your disk is still actively being scanned. If the LED stays off, then this is the best situation if you are forced to restart the computer during the first three stages.
To manually restart your computer, you need to press and hold the power button for a few seconds until it powers down. Wait a few seconds until all lights are off and fans have stopped. Then press the power button again to restart. This method is pretty standard across all computers, including brands like Lenovo, HP, Dell, Microsoft, and Asus.
2. Change autocheck in Registry Editor
All Windows operating systems use the Windows Registry. Windows Registry stores important Microsoft Windows configuration settings in a hierarchical database formatted like a tree. Data in the Windows Registry may be stored with keys, key and value pairs, or keys, subkeys, and values.
Warning: Generally, editing the Registry is not recommended if you are not familiar with computers, databases, or Windows. If you make incorrect changes to the Registry, you can cause major data loss or corruption. Therefore, be sure to follow each step carefully, referring back to this guide often.
To stop the Fixing C Stage 1 or Fixing C Stage 2 issues on Windows startup, you will be navigating to the Registry Editor and finding Session Manager so that you can change “autocheck autochk *” to “autocheck autochk /k:C”.
- Press the Windows key + R to open Run. Next to Open, in the search bar, enter “Regedit”. Press OK. Depending on your permissions settings, you may see a pop-up asking if you want to allow Registry Editor to make changes to your device. Click Yes.
- When Registry Editor opens, it will look something like the image below. The left-hand pane is used for navigation, and the right-hand pane is for values and editing. Find the address bar right under the menu. In the picture below, the address is set to Computer.
- You need to replace whatever is in the address bar with the following:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
- On the right-hand side, you will see a list of entries. Find Boot Execute and double-click to open the Edit Multi-String window.
- Replace the Value data entry of “autocheck autochk *” with “autocheck autochk /k:C *”. Click OK to save.
- Close the Registry Editor and restart your computer. Hopefully, the problem is fixed, but if not, you can continue to the next solution.
3. Run CHKDSK from the Command Prompt
You learned about the CHKDSK utility and what Windows is doing behind the scenes when you see the Fixing C Stage 1 or Fixing C Stage 2 messages, but now you’re going to use it yourself.
If this message pops up during Windows startup on your Dell, HP, Asus, or Lenovo laptop, it’s a good idea to go ahead and plan to run CHKDSK yourself to check for hard drive issues. You may need to plan this around a day where you will be home but do not need to access your computer.
To run CHKDSK, follow these steps:
- For Windows 7, 8, 10, or 11, click the Windows key or press the Start icon to open Windows search. Type “Command Prompt” into the search bar. Under the Command Prompt app result, select Run as Administrator.
- Depending on your permissions settings, you may see a pop-up asking if you want to allow Registry Editor to make changes to your device. Click Yes.
- Within the Command Prompt window, type the following command and press Enter:
chkdsk c: /r - Command Prompt may ask to schedule the disk to be checked with the following message:
“Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)“ - Enter “Y” to respond yes and press Enter. The Command Prompt will display another message:
“This volume will be checked the next time the system restarts.“ - When you are ready to proceed with the scan and can dedicate at least the next 4-12 hours to a disk scan, then restart your system. CHKDSK will scan your entire hard drive, looking for corruption and damage.
Fixing C Stage 1 and Fixing C Stage 2 issues solved
You’ve learned about the Windows boot process and what the CHKDSK utility is for in hopes of fixing a bothersome message during startup. You learned three methods to remedy this problem permanently, starting with manually restarting your computer, editing your registry, and then scheduling the full CHKDSK scan on startup.
Hopefully, these solutions have fixed your problem, but if not, it may be time to consider an HDD replacement, as it may be too corrupted to recover.
Most new computers today are built with Solid State Drives (SSD). SSDs are an all-around hardware upgrade over legacy HDDs. SSDs are quieter and much quicker in reading and writing data to the drive, but another great improvement is the durability. Hard drive disks are susceptible to corruption and damage because the drive spins so closely to the read/write head. HHDs can experience a head crash if jarred while reading/writing or if dust enters the drive.
If your HDD is compromised and you are still experiencing issues with Fixing C Stage 1 or Fixing C Stage 2, it may be time to upgrade. Thankfully SSDs are very affordable and are definitely worth the investment.
I accidentally left my pc turned on overnight, and when I used it this morning, it was pretty slow. I tried to turn it off, but it was not working, so I did a hard reset. Then my screen showed the fixing Stage 1, and the timer keeps going up and up (right now, it’s 25 hours). Is my PC broken? Why is my computer fixing C Stage 1? How do I fix it?
Your PC is not broken. It’s doing a disk check. Please don’t stop or interrupt the first three phases of the operation.»What is fixing (C:) Stage 1 meaning?» This issue means that Windows may identify unexpected drive faults on one of your internal or external disk devices.
Supported by EaseUS Software, this article will help you find the possible reasons and feasible fixes for the fixing (C:) Stage 1 issue.
Why is my computer fixing (C:) Stage 1
When your PC displays the notice Fixing (C:) Stage 1 and takes a long time to move, it usually indicates that your system is running a disk error check. This process, known as Chkdsk (Check Disk), tries to find and resolve hard disk errors on startup (1). Please check the potential reasons for the Fixing (C:) Stage 1 screen below.
- Leave the computer running for a long time
- Improper shutdown
- Many junk files on your C drive
- Corrupted, failing, or old hard drive
Fix 1. Check Your Hard Disk for Errors without Losing Data
How to stop Windows fixing (C:) Stage 1? As mentioned in the opening paragraph, Windows automatically launches the fixing (C:) Stage 1 program to check and repair detected hard disk errors. Based on this consideration, you can use EaseUS Partition Master to check your hard disk for errors.
The following steps depict how to check and repair hard disk partition errors using this versatile third-party tool.
Step 1. Right-click the target partition that may have a problem.
Step 2. Choose «Check» > «Check File System».
Step 3. In the Check File System window, check the «Try to fix errors if found» option by clicking the «Start» button.
Step 4. Please wait patiently. After the process, you can click the «Finish» button to exit the window.
Please share this post if it helps you!
Fix 2. Run the CHKDSK Utility
If you want to skip fixing 1 (C:) Stage 1, you can also run CHKDSK to check and repair drive errors, including logical and physical errors. Here are the steps. However, if you’re unfamiliar with CMD and afraid of data loss, adopting Fix 1 seems more user-friendly and efficient.
- Recommendation
- CHKDSK /F: Check for disk errors, not bad sectors. This parameter, /f, is tailored for someone who wants to find existing mistakes.
- CHKDSK /R: Help you find the bad sectors on the target hard disk and try to recover the readable information from the bad sectors.
- CHKDSK /X: If required, force the volume to dismount before proceeding. This parameter, /x, also includes the functionality of /f.
Step 1. Type cmd in the search bar > select Run as administrator to open the command prompt window.
Step 2. Type CHKDSK C: /F/R/X in the window > press Enter. You can replace the C drive with the drive letter of the partition you want to repair.
Fix 3. Modify the Value in the Registry Editor
How to skip fixing (C:) Stage 1? Editing your Registry Editor in Safe Mode is the third feasible way. Here’s why this works.
- ❓Reasons
- Safe Mode is a diagnostic mode that allows you to run Windows using basic drivers. If you have problems with Windows, rebooting in Safe Mode allows you to continue working while troubleshooting the issue.
- The Registry Editor enables you to modify settings not visible in the user interface, such as system policies, installed applications, and the file types that specific applications can open.
The steps demonstrate how to stop Windows fixing (C:) Stage 1 by editing Registry Editor in Safe Mode.
Step 1. Win11 users can click the Power button > select Restart.
Step 2. Follow the on-screen instructions to click Troubleshoot > Advanced options > Startup Settings > Restart.
Step 3. Select an option by pressing one of the numbers or function keys F4, F5, or F6.
Step 4. Press Win + R > type regedit in the window > click OK or press Enter to open the Registry Editor.
Step 5. Go to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager > double-click Session Manager > locate the BootExecute file > right-click on it > select Modify.
Step 6. Edit its value data as autocheck autochk * < click OK. If the value data of this file is autocheck autochk *, change it to autocheck autochk /k:C *.
Please share this post if it helps you!
Fix 4. Replace the C Drive with Another One
A corrupted or damaged hard drive is also responsible for the Windows Fixing (C:) Stage 1 screen. To avoid this issue, replace your old hard disk with another HDD or SSD using EaseUS Partition Master to speed up the computer’s performance.
- Recommendation
- If the budget allows, you’d better prepare a new HDD or SSD.
- The target HDD/SSD, at least, is the same size as the original disk.
- Since you cannot boot your PC, you need to follow these clicks to boot this PC normally: create a bootable USB media on another working PC using EaseUS Partition Master > connect the USB bootable media to the unnormal PC > restart it > press F2/F8/Del key to enter BIOS > set the USB bootable disk as the first boot disk > this PC will automatically boot up from the USB bootable media and enter EaseUS WinPE desktop.
- Connect your target HDD or SSD to your PC, and then EaseUS Partition Master reloads the disk information.
- Under the Disk Clone tab, please select the Clone OS Disk option because the old disk containing your C drive may have an EFI System Partition essential to a successful boot. You can press Win + X > select Disk Management to check it.
Step 1. Launch EaseUS Partition Master, go to the Disk Clone tab, select «Clone OS Disk» and click «Next».
Step 2. Select the target new drive where you want to clone the OS to, and click «Next».
Click «Yes» to confirm that you want to continue the OS disk cloning process.
Step 3. View the disk layout, and click «Start» to begin the OS cloning process.
Step 4. When the process completes, you’ll see a confirming message, asking «if you want to start up computer from the clone target disk».
- Reboot Now means to reboot your PC and configure the computer to boot OS from the new disk immediately.
- Done means you want to make the changes later.
Conclusion
“What’s the fixing (C:) Stage 1 meaning? How to stop fixing (C:) Stage 1?» If your computer says fixing (C:) Stage 1, it implies running a disk check to find and repair unexpected errors on your internal or external hard drives. Encountered with this warning, please don’t interpret this process or shut down your PC. Just wait patiently.
This article also lists relevant reasons and feasible solutions. All in all, users cannot hesitate to download the CHKDSK free alternative, EaseUS Partition Master, because this versatile partition manager software comes with the Check File System or Disk Clone feature in a much simpler operation.
FAQs about Fixing (C:) Stage 1, 2, 3
Meanwhile, this section lists relevant topics about fixing (C:) Stage 1, 2, or 3. If necessary, please check them out below.
1. What is CHKDSK Stage 1?
CHKDSK is verifying files ( Stage 1 of 3). In the first stage, files having MFT entries (the partition’s table of contents) were compared and tested. CHKDSK is verifying indexes (step two of three). During this stage, the folders and structure are examined.
2. Is it safe to stop CHKDSK at Stage 1?
No, it isn’t. Many users think stopping CHKDSK during stages 4 or 5 should be safe, but interpreting it during stages 1 to 3 is not recommended because it might cause file system corruption or data loss.
3. Will Fixing (C:) Stage 1 damage my files?
No, it will not. A Check Disk will scan all files on your disk and can only affect damaged ones. Check Disk will attempt to restore recoverable files, but if unrecoverable corrupt files are discovered, they will be removed and placed in a hidden folder named found.000 on your C drive. Thus, only unrecoverable files will be erased.
Please share this post if it helps you!
“fixing C stage 1” is an error encountered during the startup of a system. This causes a lot of delay in the opening of the Windows Home screen. Sometimes it does not even proceed further than 45% progress.
Today we will discuss the various ways that can be implemented to rectify this issue, what are the multiple reasons that lead to this nuisance, and how one can prevent it from happening in the future.
Causes of Fixing C Stage 1
The various reasons that can give rise to this issue are:
- Improper shutdown.
- Power failure.
- Corrputed hard drive.
- Heavy load and many junk files on the hard drive.
- Damaged hard drive.
Prevention Methods:
- Make a backup of your files.
- Upgrade to a Solid State drive.
- Use a SATA SSD for your system.
- Do not install or download files from untrustworthy sites.
4 Ways to Rectify ” fixing c stage 1″
Press the Power button:
Progress is plodding when your laptop displays the black screen with text of Fixing C stage 1 or some other stage value. Then you can try to speed up the progress speed by pressing the Power Button for just two seconds, not more than that, or the system will shut down.
For PC, use the power button situated on the CPU or the monitor.
This will not rectify the error but can speed up the loading.
Using the Registry Editor:
Once your Windows home screen shows up, refresh it and perform the following steps:
- Open the Run Command. (Win key + R)
- Type Regedit on it, hit Enter.
- In the path area, copy paste the below path:
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
- Double click on the file named “Muti-String”.
- Change the value data to : autocheck autochk /k:C *
- If the error for you is not due to the C drive but with some other drive, then mention that Drive name instead of “C”.
- Click on “OK”.
- Restart your device.
Chkdsk Command:
You can prevent the errors caused in the drive, which leads to fixing c stage 1 and then stage 2 by using the Command Prompt.
- Run Command Prompt as an Administrator.
- It will prompt for permission, click on YES.
- Type: “chkdsk c: /r”
- Press the Enter key.
- If the Command Prompt asks to schedule the disk to be checked, type “y” which is for yes. Hit Enter button.
- Restart your computer.
Using chkntfs command:
- To remove the “fixing C stage 1”, open the command prompt using the Administrative privilage.
- Type the following:
- chkntfs /x c:
- Hit Enter.
- Restart or reboot your device.
If your loading screen still shows the progress bar with Fixing c stage 1, you will have to show it to a technician to replace the corrupted hard drive.
It occurs at the drive where Windows is installed (C Drive). It is either caused by a corrupted folder or application, or the disk is old and incompatible with the latest updates. Try resolving these two issues to fix them.
How to end: fixing c stage 1 loop
If the loading progress bar for Stage 1 is very slow or stuck for many minutes, then try pressing the Power button for two seconds only. Pressing it for much time will shut the device down. Pressing the power button for less time can help in fastening the speed.
Acer laptop and Dell laptop shows fixing c stage 1, how to fix
Try using the commands “Chkntfs”, “Chkdsk” commands in your Command Prompt. If it did not solve the issue, open Registry Editor and change the Edit String value and add /k:C* to its end.
What is Fixing C stage 2 in Windows 10:
There can be a maximum of four stages when your system tries automatically to fix the inconsistency in the drives. The second stage arrives after the first stage. The second stage is usually shorter than the first stage.
FAQs on Fixing C Stage 1
How to stop “Fixing C stage 1” scan during device startup?
You can use the below ways to fix this issue:
1. Long press the Power button for only 2 seconds.
2. In the registry editor, change “autocheck autochk” to autocheck autochk /k: C *
3. Using the CHKDSK command.
4. Using the CHKNTFS command.
What are the various causes that can lead to this issue?
The different factors are:
The shutdown of the system was not done correctly.
A power failure.
Corrupted hard disk.
Heavy load and many junk files on the hard disk.
Damaged hard disk.
How long does the “Fixing C stage” scanning takes, and maximum, how many stages can it have?
The scanning and fixing of this problem can take from 20 minutes to nearly an hour. There is a maximum of four stages in it.
Winding up
We have discussed the four ways to stop the automatic scanning and fixing of the default Hard Disk Drives. You can ping us anytime to ask for solutions for other concerning topics, using the comment box available at the bottom of the page.
Trending
-
The Best Popup Builders in 2025: Boost Engagement and Conversions
●February 22, 2025
-
Fixing Xtools XToolkit Installation Error
by Dharam Nath Jha●March 3, 2023
-
Troubleshoot DeepMotion Preview Not Working: Tips and Tricks
by Dharam Nath Jha●March 3, 2023
-
Getting Virtwifi has No Internet Access? Here’s What to Do!
by Dharam Nath Jha●February 16, 2023
C Stage 1 is a type of error that can occur in Windows 11/10. This error is typically caused by a problem with the registry or a system file. If you’re experiencing this error, don’t worry – there are some of the few things you can do to fix it.
In this blog post, we’ll let you know about the causes of C Stage 1 in Windows, how to avoid the issue, as well as what to do if it has already happened to you. By the time you’re done, you’ll have all the resources you need to maintain your computer’s flawless operation and stop Fixing C Stage 1.
What is C Stage 1 in Windows?
C Stage 1 is an error that can occur when there’s a problem with the registry or a system file. The registry is a database that houses data on the hardware and software of your computer. System files are important because they help your computer run properly.
When these files become corrupt or damaged, it can cause C Stage 1. Here comes the solution to stop Fixing C Stage 1.
If you are using another issue of fixing C Stage 2 then you must check this blog.
To repair C Stage 1, there are a few things you can do. Run the System File Checker utility first. This program will search your system for damaged files and make an effort to fix them. Follow these steps to launch the System File Checker tool:
1) Open the Command Prompt.
2) Type SFC /scan now into the Command Prompt window and hit Enter.
3) Be patient, as the scan can take some time to finish.
4) Restart your computer after it’s finished and check to confirm if the problem has been fixed.
It’s possible that you’ll need to do a clean boot of your machine if the System File Checker utility is ineffective. The C Stage 1 problem can be fixed by performing a clean boot, which will start your computer with the fewest possible startup apps and drivers.
Therefore, you are on the right track to fixing the problems with C Stage 1.
Take the following actions to execute a clean boot:
1) Go to Start > Run and type MSConfig in the box that appears.
2) Click on the Startup tab and select Disable All. This will disable all non-essential programs from starting up when your computer boots up.
3) Click on the Services tab and check to Hide All Microsoft Services at the bottom of the list. This will hide all Microsoft services so that you can focus on third-party services that may be causing problems.
4) To make the changes take effect, click OK and then restart your computer. After your computer has restarted, try running whatever program was giving you errors and see if it works now.
5) If it does work, go back into MSConfig and re-enable each service one at a time until you find the one that’s causing problems. Once you’ve found it, leave it disabled and restart your device again for the changes to take effect.
6) Finally, go back into MSConfig and click on Normal Startup on the General tab before clicking OK and restarting your computer one last time. This will return everything back to normal so that all of your programs will start up when your computer boots up again.
FAQs Answered!
What does fixing Stage 1 mean?
While booting your Windows computer, if you get to see a black screen with the Windows logo and the statement “Fixing (C:) Stage 1,” your system is likely scanning for disc errors. It will identify any hard disc problems and resolve them throughout the lengthy procedure, which often takes place.
What is the turnaround time for the C drive repair?
Depending on the size of your drive and the number of faults identified, the time it takes for your computer to scan and repair a hard drive may take longer than two hours. The process is usually not that simple.
First of all, the error-checking dialogue should be closed. Now, by putting cmd into the desktop search box and choosing Run as administrator, you can launch the Command Prompt. chkdsk C: /f is the command to enter now.
Why is my computer repairing the C drive?
The “Scanning and repairing drive” warning often appears when your computer hasn’t been properly shut down, such as after a forced shutdown, a power outage, etc.
If your computer cannot boot from your boot drive because of potential issues, you can see the warning “repairing disc errors.” In short, this issue typically happens if you forcefully shut down the computer or if the main hard drive is damaged, such as having defective sectors.
Final Words On Fixing C Stage 1 issue
The CHKDSK software is currently used by your system to fix disc problems, as shown by the Stage 1 screen. It won’t go away till the procedure is over. So, you can select to boot into Safe Mode and run CHKDSK to correct the faults since disc defects like faulty sectors and file system errors are most likely to be the root of the “Scanning and repairing drive” blocked issue.
Also Read
- How to stop Undoing Changes Made To Your Computer