Are you experiencing slow performance on your computer? You might be surprised to learn that Windows Problem Reporting could be the cause. When this feature consumes a high amount of CPU resources, it can significantly impact the speed and responsiveness of your system. But don’t worry, there are ways to address this issue and improve your computer’s performance.
Windows Problem Reporting is a built-in feature in Windows operating systems that allows users to report any issues or errors they encounter. It collects data about software crashes and performance problems to help Microsoft analyze and fix them. However, when this feature becomes overwhelmed or misbehaves, it can result in excessive CPU usage, leading to sluggishness and delays in your system’s operation.
If you’re experiencing Windows Problem Reporting using high CPU, you’re not alone. This issue can be caused by several factors, including software conflicts, corrupt system files, or incompatible hardware drivers. To resolve it, start by updating your Windows operating system and all device drivers. Next, perform a full system scan for malware and viruses. If the problem persists, try disabling the Windows Error Reporting service or adjusting the reporting settings. If all else fails, seek professional assistance or contact Microsoft support for further troubleshooting.
Understanding Windows Problem Reporting
Windows Problem Reporting is a feature in the Windows operating system that collects and sends error reports to Microsoft, allowing them to analyze and fix issues. These error reports help Microsoft identify software and hardware problems that users encounter and continuously improve the performance and reliability of Windows. However, some users have reported experiencing high CPU usage due to the Windows Problem Reporting process.
What Causes High CPU Usage in Windows Problem Reporting?
There can be several reasons behind the high CPU usage related to Windows Problem Reporting:
- Software Conflicts: Conflicts between different software applications running on your computer can cause the Windows Problem Reporting process to consume excessive CPU resources.
- Corrupted System Files: If certain system files essential for the functioning of Windows Problem Reporting get corrupted, it can lead to high CPU usage.
- Malware Infection: Malicious software or viruses that infect your system can interfere with various processes, including Windows Problem Reporting, leading to increased CPU usage.
- Outdated Drivers: Outdated or incompatible device drivers can sometimes cause conflicts with Windows Problem Reporting, resulting in high CPU usage.
Impact of High CPU Usage in Windows Problem Reporting
Excessive CPU usage by Windows Problem Reporting can have several negative impacts on your computer’s performance and user experience:
- Sluggish System Performance: When the CPU is overloaded with the Windows Problem Reporting process, it can slow down other tasks, making your computer run slowly and affecting overall performance.
- Increased Power Consumption: High CPU usage generates excess heat, causing your computer’s fans to work harder, resulting in increased power consumption and potentially shorter battery life on laptops.
- Unresponsive Applications: If the CPU is busy dealing with the high CPU usage caused by Windows Problem Reporting, it can make other applications unresponsive or freeze temporarily.
- Potential Data Loss: In extreme cases, where the CPU is pushed to its limits due to high CPU usage, there is a risk of data loss or system crashes if the problem is not addressed promptly.
How to Identify High CPU Usage by Windows Problem Reporting?
If you suspect that Windows Problem Reporting is causing high CPU usage on your computer, you can follow these steps to identify and confirm the issue:
- Open the Task Manager by right-clicking on the taskbar and selecting «Task Manager» from the menu.
- Select the «Processes» or «Details» tab, depending on your Windows version.
- Look for the process named «Werfault.exe» or «Windows Problem Reporting» in the list of active processes.
- If the CPU usage of this process is consistently high (above 50% or more), it indicates a potential problem.
Once you have confirmed that Windows Problem Reporting is causing high CPU usage, you can take appropriate measures to resolve the issue.
Methods to Fix High CPU Usage by Windows Problem Reporting
Here are some effective methods you can try to fix the problem of high CPU usage caused by Windows Problem Reporting:
1. Update Windows and Drivers
Make sure your Windows operating system is up to date, as Microsoft frequently releases updates that address performance issues and bugs. Similarly, update your device drivers by visiting the manufacturer’s website and downloading the latest versions compatible with your hardware.
Updating both Windows and drivers can resolve compatibility issues and improve system stability, potentially resolving the high CPU usage problem.
2. Perform a Full System Scan
Scan your computer for malware using a reputable antivirus or antimalware software. Malicious programs can interfere with various system processes, including Windows Problem Reporting, leading to high CPU usage. Remove any detected threats and perform a full system scan regularly to prevent future infections.
3. Disable Windows Error Reporting
If you find that the high CPU usage caused by Windows Problem Reporting persists, you can try disabling the Windows Error Reporting feature:
- Open the Control Panel and navigate to «System and Security.»
- Select «Action Center» and then click on «Change Action Center settings» in the left sidebar.
- Click on «Problem reporting settings» and choose «Never check for solutions» option.
- Click «OK» to save the changes.
Seek Expert Assistance
If you have tried the above methods and are still experiencing high CPU usage due to Windows Problem Reporting, it is recommended to seek assistance from a professional. An expert can perform in-depth analysis and troubleshooting to identify and resolve the underlying cause of the issue.
Remember that high CPU usage can have multiple causes, and it’s important to rule out other potential factors before concluding that Windows Problem Reporting is solely responsible for the issue.
Exploring Other Factors Related to Windows Problem Reporting High CPU
In addition to the causes and solutions mentioned earlier, there can be other factors related to Windows Problem Reporting that can contribute to high CPU usage. These factors include:
Windows Problem Reporting Service Settings
The settings of the Windows Problem Reporting service can impact its behavior and resource usage. By modifying these settings, you can potentially mitigate high CPU usage:
- Reduce the frequency of error reporting: Decreasing the frequency of error reports sent to Microsoft can help reduce the strain on CPU resources.
- Limit the number of error reports: Instead of allowing an unlimited number of reports to be sent, consider setting a limit to prevent excessive resource usage.
Application Compatibility Telemetry
Application Compatibility Telemetry is another Windows feature that collects data to improve application compatibility. However, this feature can also contribute to high CPU usage. To address this, you can:
- Disable Application Compatibility Telemetry: You can disable the Application Compatibility Telemetry feature if you find it causing high CPU usage. This can be done through the Group Policy Editor or Registry Editor.
Configuration Changes
Certain configuration changes and optimizations can help reduce the impact of Windows Problem Reporting on CPU usage:
- Adjust the reporting mode: You can change the reporting mode for Windows Problem Reporting to «Queued» or «Disabled» to minimize CPU usage.
- Disable automatic solution retrieval: Disabling the automatic retrieval of solutions for reported errors can reduce the CPU load caused by Windows Problem Reporting.
Remember to exercise caution when making changes to system settings and consult the appropriate documentation or seek expert guidance if needed.
In conclusion, high CPU usage caused by Windows Problem Reporting can impact system performance and user experience. By understanding the underlying causes and implementing the appropriate solutions or optimizations, you can alleviate this issue and ensure smoother operation of your Windows system.
Windows Problem Reporting High CPU
Windows Problem Reporting is a feature of the Windows operating system that collects and sends information about system errors, crashes, and other issues to Microsoft. However, sometimes this process can consume a significant amount of CPU resources, causing your computer to slow down.
If you are experiencing high CPU usage due to Windows Problem Reporting, there are a few steps you can take to resolve the issue:
- Update your Windows operating system to the latest version. Microsoft often releases updates and patches that address performance issues.
- Disable Windows Problem Reporting temporarily. This can be done by going to the Control Panel, clicking on System and Security, and selecting «Action Center». From there, click on «Change Action Center settings» and uncheck the option for «Problem reporting».
- Scan your computer for malware. Malicious software can sometimes cause high CPU usage. Use a reliable antivirus program to scan your system.
If these steps do not resolve the issue, it is recommended to seek professional assistance from an IT technician or contact Microsoft support for further guidance.
Key Takeaways
- Windows Problem Reporting can cause high CPU usage on your computer.
- Windows Problem Reporting is a built-in Windows feature that collects and sends error reports to Microsoft.
- High CPU usage from Windows Problem Reporting can slow down your computer and affect its performance.
- You can check if Windows Problem Reporting is causing high CPU usage through Task Manager.
- To fix high CPU usage from Windows Problem Reporting, you can disable error reporting or limit its impact.
Frequently Asked Questions
If you’re experiencing high CPU usage due to Windows Problem Reporting, you may have questions on how to resolve this issue. Here are some commonly asked questions related to Windows Problem Reporting and high CPU usage.
1. Why is Windows Problem Reporting causing high CPU usage?
Windows Problem Reporting is a feature in Windows that collects and submits information about system errors and crashes to Microsoft. When this feature is enabled and encounters errors, it can sometimes lead to high CPU usage as it processes and submits the error reports. The high CPU usage is often temporary and should subside once the error reports are submitted.
If you notice consistent high CPU usage due to Windows Problem Reporting, it may indicate a larger issue with your system or specific application errors. In such cases, troubleshooting steps may be required to resolve the underlying problem.
2. How can I reduce the high CPU usage caused by Windows Problem Reporting?
To reduce high CPU usage caused by Windows Problem Reporting, you can try the following steps:
1. Disable Windows Problem Reporting: Go to the Control Panel > Action Center > Change Action Center settings. Under the «Maintenance» section, uncheck the box next to «Check for solutions to problem reports.» This will prevent Windows Problem Reporting from collecting and processing error reports, reducing CPU usage.
2. Limit the number of error reports: You can configure Windows Problem Reporting to collect and submit error reports only for specific programs or opt to send them only when connected to an external network. This can help reduce the load on your CPU.
3. Disable error reporting for specific applications: If you notice high CPU usage specifically related to certain applications, you can disable error reporting for those applications. This will prevent Windows Problem Reporting from collecting and processing error reports for those specific programs.
4. Update your system and applications: Outdated software can sometimes lead to compatibility issues and errors that trigger high CPU usage. Make sure your operating system and applications are up to date to avoid such problems.
5. Run a malware scan: Malware infections can also cause high CPU usage. Use a reliable antivirus software to scan your system and remove any potential threats that may be contributing to the issue.
3. Can I completely disable Windows Problem Reporting?
Yes, it is possible to completely disable Windows Problem Reporting. However, keep in mind that by disabling this feature, you will not be able to submit error reports to Microsoft or receive recommended solutions for system errors. To disable Windows Problem Reporting:
1. Go to the Control Panel > Action Center > Change Action Center settings.
2. Under the «Maintenance» section, uncheck the box next to «Check for solutions to problem reports.»
Disabling Windows Problem Reporting may be suitable for users who prefer to handle troubleshooting and error resolution themselves or have alternative methods to collect and analyze error data.
4. Is there a way to limit the CPU usage of Windows Problem Reporting?
Windows Problem Reporting does not have built-in settings to limit its CPU usage directly. However, you can indirectly limit its impact on CPU usage by following the steps mentioned in question 2, such as disabling it or limiting error reports for specific programs or network connections.
If you are experiencing persistent high CPU usage due to Windows Problem Reporting, it is recommended to investigate further to identify the underlying cause. It may be necessary to troubleshoot other system components or applications that are contributing to the problem.
5. Are there any alternative error reporting tools I can use instead of Windows Problem Reporting?
Yes, there are alternative error reporting tools available that can be used instead of Windows Problem Reporting. Some popular options include:
— Third-party crash reporting software: These tools provide enhanced error reporting capabilities and allow you to customize the reporting process.
— Application-specific error reporting: Many applications have their own error reporting mechanisms built-in. These tools can provide specific information about application-related errors and crashes.
In summary, the Windows Problem Reporting process can sometimes consume a high amount of CPU resources on your computer. This can impact the performance of your system and may cause it to slow down or freeze. To address this issue, you can try disabling the Windows Error Reporting service or adjust its settings to minimize the impact on your CPU. Additionally, regularly updating your Windows operating system and keeping your drivers up to date can help prevent any compatibility issues that may contribute to the high CPU usage.
If you continue to experience high CPU usage from Windows Problem Reporting, it may be helpful to scan your system for malware or perform a clean boot to identify any conflicting applications. Remember to always exercise caution when modifying system settings or installing third-party software, as these actions can have unintended consequences and pose security risks. It’s always a good idea to consult with a professional if you are unsure about any adjustments you need to make to resolve the issue. By taking these steps, you can optimize your CPU usage and maintain the performance of your Windows computer.
Rick Akura
Werfault.exe is a Windows Error Reporting process. In this guide, you will learn how to fix high CPU usage caused by Windows problem reporting.
Many Windows 10 users have been reporting that a problematic process called “Windows Problem Reporting” has been causing significant performance drops. This happens because the process is using up an unusually high amount of CPU, slowing your computer down.
The process is also referred to as Werfault.exe, which may sound alarming to some people. Sudden processes eating up your memory are no good — in this article, you can find out what this process exactly is, and how you can get rid of the issues caused by it.
Jump to:
- What is the Windows Problem Reporting (Werfault.exe) process?
- Common Windows Problem Reporting (Werfault.exe) errors
- Guide to fix Windows Problem Reporting (Werfault.exe) errors
- Method 1: Run the System File Checker
- Method 2: Use the Windows Memory Diagnostic tool
- Method 3: Perform a Disk Cleanup
- Method 4: Scan your computer for possible viruses and malware
- Method 5: Turn Windows Problem Reporting off
What is the Windows Problem Reporting (Werfault.exe) process?
Windows Error Reporting, also referred to as Werfault.exe, is a process that handles your error reports. Whenever one of your apps crashes or runs into an issue, you can report this to Microsoft and enhance their ability to fix the issue in a future update.
Under normal circumstances, this process is not a virus or malware. However, some advanced threats can disguise themselves as the Werfault.exe process, which requires attention. Below, you can find a guide on how to scan your PC for malware, eliminating the possibility of a fake Werfault.exe existing on your device.
Common Windows Problem Reporting (Werfault.exe) errors
Even if you have a completely legitimate Windows Problem Reporting (Werfault.exe) process running on your computer, it may still be causing issues for you. We were able to collect the most common problems related to the process, making it easier to trace its source.
- Unusually high CPU usage. Perhaps the most evident issue related to this process is its high CPU usage. When your CPU is under a lot of pressure, your computer will naturally start to function slower. This can get to a level where it’s hard to perform even the most basic tasks without waiting around for everything to load.
- Corrupted or missing system files or Registry keys. If your system files or Registry keys were damaged or deleted, you may start to experience issues with Windows Problem Reporting (Werfault.exe).
- Werfault.exe Application Error. There’s always the possibility of other errors occurring concerning Werfault.exe. These issues can make using certain apps and Windows features impossible.
- Werfault.exe has encountered a problem and needs to close. We are sorry for the inconvenience. This generic Windows 10 error message can pop up and signal that you can no longer use the Windows Problem Reporting tool.
Guide to fix Windows Problem Reporting (Werfault.exe) errors
Now that we’ve taken a closer look at what the Windows Problem Reporting (Werfault.exe) process exactly is, it’s time to look for solutions. Below are several methods you can use to restore order on your computer.
Note: For some of these methods, you’re required to log in to an administrator account on your device. This is because we’ll be making changes to your system in an attempt to restore damage or change settings.
Don’t have access to an administrator account? Watch GlobalIT Resolution’s video titled “How to Create a New Administrator User Account in Windows 10.”
Let’s get started!
Method 1: Run the System File Checker
The System File Checker is a tool available in Windows 10 by default. It’s also called an “SFC scan,” and it’s your quickest way to automatically fix corrupted system files and other issues.
Here’s how to run it.
-
Press the Windows + R keys on your keyboard to launch the Run utility. Type in “cmd” and press Ctrl + Shift + Enter. This is going to open the Command Prompt with administrative permissions.
- If prompted, make sure to allow the Command Prompt to make changes on your device. This means that you might need an administrator account.
-
Type in the following command and press Enter: sfc /scannow.
- Wait for the System File Checker to finish scanning your computer. If it finds any errors, you’ll be able to fix them automatically through the SFC command itself, which may also fix related errors.
Method 2: Use the Windows Memory Diagnostic tool
You can attempt running the Windows Memory Diagnostic tool to solve issues related to the Windows Problem Reporting (Werfault.exe) process.
This isn’t the most reliable method, but some Windows 10 users have reported that the scan was able to identify the correct cause and offer the needed solution.
-
Use the search function (available from your taskbar or by pressing the Windows + S keys on your keyboard,) to search for Windows Memory Diagnostic.
-
Open the Windows Memory Diagnostic Tool from the search results.
-
Click on Restart now and check for problems (recommended). This will restart your computer right away, then scan it for memory issues. Make sure you save your files and don’t have anything important open before clicking on this.
- Wait for your computer to restart. During startup, you’ll see the Windows Memory Diagnostic tool scanning your PC. If any issue is found, the tool will automatically apply a fix.
- Use your computer to determine if you still experience issues with the Windows Problem Reporting (Werfault.exe) process.
Method 3: Perform a Disk Cleanup
There is a possibility that piled-up junk on your computer might cause issues with Werfault.exe. This is because the program associated with it responds slowly due to the temporary junk files, resulting in Werfault.exe timing out.
Tip: Not everything will be caught by the Disk Cleanup tool, but it can help remove most temporary files on your computer. For more thorough cleaning, we recommend using an application such as CCleaner after Disk Cleanup.
You can clear temporary files and junk from your computer with the Disk Cleanup utility. Follow the steps below to perform a cleaning:
-
Use the search function (available from your taskbar or by pressing the Windows + S keys on your keyboard,) to search for Disk Clean-up.
-
Open the Disk Clean-up utility from the matching search results.
-
If prompted, select the drive you want to clear and press OK. This should be the drive where Windows 10 is installed.
- Wait for the scan to complete. This might take a long time depending on the specs of your computer and the number of files you have.
- Select the type of files you want to delete under the “Files to delete” section. Here is a list of things we recommend cleaning to free up space:
- Windows Update Clean-up
- Temporary Internet Files
- Windows error reports and feedback diagnostics
- Delivery Optimization Files
- Device driver packages
- Recycle bin
- Temporary files
- Thumbnails
- Press OK and wait for the Disk Cleanup to finish. Once again, this might take a long time. Don’t turn your computer off during the process.
Method 4: Scan your computer for possible viruses and malware
We recommend checking for malware on your computer at least once every week. There is always a possibility that you clicked on a shady link or downloaded something containing malicious files. This might not be immediately obvious, and in the long run, may cause serious damage to your device and files.
If some type of malware got on your computer and tampered with Werfault.exe, it’s the reason why your errors happen.
You can use the integrated Windows Defender to combat this. It’s Windows 10’s default security solution that doesn’t cause issues and provides basic protection against most threats.
There’s also a great number of third-party antivirus software available for download, which often offers a lot more than Defender does. These applications often offer both free and paid services.
Method 5: Turn Windows Problem Reporting off
If none of the methods above seemed to fix your Werfault.exe issues, you can try disabling the Windows Error Reporting Service altogether. While this isn’t ideal, it’s most definitely going to fix your errors.
- Press and hold the Windows key on your keyboard, then hit R. This shortcut launches the Run utility.
-
Write “services.msc” in the input field, then click the OK button. Doing this will bring up a new window called Services.
-
Scroll down and locate the “Windows Error Reporting Service.”
- Right-click on “Windows Error Reporting Service” and choose “Properties”.
-
Change the Startup type to “Disabled”.
- Press the Apply button, then the OK button.
- Restart your computer. Your device will boot up without the Windows Problem Reporting service active.
We hope this article was able to help you understand what the Windows Problem Reporting (Werfault.exe) process is and how you can get rid of its issues. If you ever notice that the process is starting to eat up your CPU again, feel free to return to this article and try our methods again!
Are you interested in learning more about Windows 10? Do you need help fixing any other Windows 10 errors and issues? You can browse our dedicated blog section and find articles about everything related to Microsoft’s groundbreaking operating system. Check our guide about werfault.exe here.
If you’re looking for a software company you can trust for its integrity and honest business practices, look no further than SoftwareKeep. We are a Microsoft Certified Partner and a BBB Accredited Business that cares about bringing our customers a reliable, satisfying experience on the software products they need. We will be with you before, during, and after all the sales.
Problem Reporting is otherwise called “Error Reporting,” which is a help turned on by default in all adaptations of Windows. This article will help you disable Windows Problem Reporting in Windows 10.
When Windows recognizes a hardware or programming mistake, it will consequently gather analytic information and report it to Microsoft. For security concerns, you might not want it. You may likewise need to disable problem reporting to try not to send private data about your PC to Microsoft because you’re not associated with the web constantly, or just to quit being provoked by the irritating alerts.
Why do you need to disable windows problem reporting in Windows 10?
There’s a need to disable Windows problem reporting in Windows 10 due to the following reasons:
1. Avoid annoying Windows alerts.
2. To avoid sending private data about your PC to Microsoft
Though Error Reporting helps us handle our error reports and send our hardware and application issues directly to Microsoft, it has its drawbacks of privacy-related issues. So let us look at the way to protect our computers from these privacy threats. Below given are solutions as to how you can disable Windows Problem Reporting in Windows 10:
Solution 1: Use Group Policy
Follow the given steps to apply the Group Policy settings in Windows 10:
1. In the Windows search box, type MMC and open the top result. MMC stands for Microsoft Management Console.
2. After it opens, click the File menu.
3. Now, select the Add/Remove Snap-in option, and then under it, click on the Group Policy Object Editor snap-in.
4. Next, click the Add button, the Browse button, and click the Users tab.
5. Now, you can choose the user or group you want to apply a specific set of configurations.
6. Finally, click the OK button, the Finish button, and click the OK button.
7. Now, click the File menu and select the Save As option.
8. Lastly, type a name for the snap-in and choose a location to store this console.
9. Finally, tap the Save button to apply changes.
Solution 2: Run SFC Scan
You can perform a System File Checker Scan using the following steps:
1. In the search box on your taskbar, type CMD.
2. From there, right-click Command Prompt and then select Run as Administrator
3. In the box that appears, type sfc/scannow.
4. Lastly, press Enter and restart your computer.
Solution 3: Run the Windows Memory Diagnostics
To diagnose memory problems on Windows 10 follow the subsequent steps:
1. Firstly, open the Control Panel.
2. Now, click the System and Security option.
3. Next, click on Administrative Tools and then double-click the Windows Memory Diagnostic shortcut.
4. Finally, you can click the Restart now button and check the problems options.
Solution 4: Try using the Registry Editor
You can use the Registry editor using the following steps:
1. Firstly, type Regedit in the Windows search box located on the taskbar.
2. After the dialogue box appears, select Registry Editor from the results.
Solution 5: Turn Off Windows Error Reporting Service
You can turn off the Windows Error Reporting Service using the given steps:
1. Firstly, open the Run dialog box from the Windows Start button.
2. In the Run dialogue box, enter services.msc.
3. Now, right-click the Windows Error Reporting Service and then click on Properties.
4. Next, select Disabled from the menu option, which is located next to Startup type.
5. Finally, click Apply to carry out the changes.
Frequently Asked Question
Q1. How do I repair Windows 10 without a disk?
Answer: To repair Windows 10 without a disk, follow the steps mentioned below:
1. Firstly, open the Windows 10 Advanced Startup Options menu by pressing the F11 key.
2. Now, go to the Troubleshoot menu and click on Advanced options.
3. Under, Advanced options select Startup Repair.
4. You now need to wait for a few minutes until Windows 10 fixes the startup problem.
Q2. Will I lose everything when I reinstall Windows 10?
Answer: No, you will be able to keep all your files and software if you reinstall Windows 10. However, there is a possibility that the reinstallation might delete certain things such as custom fonts and Wi-Fi credentials. But you need not worry; keeping this issue in mind, the setup also creates an old Windows folder with everything from your previous installation.
Q3. What will reset this PC do in Windows 10?
Answer: Reset This PC is a repair tool used for serious operating system problems in Windows 10. This tool also has the option to keep your personal files and removes any software you have installed. It is only after doing this that it reinstall Windows.
Q4. Will resetting my PC fix driver issues?
Answer: Yes, resetting Windows 10 will partially fix your driver issues, as the newly installed drivers would be updated ones. However, you might need to download specific drivers again that Windows was unable to find automatically.
Q5. How do I stop the Blue Screen of Death Windows 10?
Answer: You can prevent the Blue Screen of Death Windows 10 by uninstalling the faulty updates. You can do it by following the given steps:
1. Open Settings in the Device Manager.
2. In the Device Manager, go to Update & Recovery and click the Windows Update option.
3. Next, click on Update history and then click on Uninstall updates.
Conclusion
We hope the article helped you in understanding how we can disable Windows Problem Reporting in Windows 10. However, if you are still unable to disable the Error Reporting, then you can connect with us via the chat box at the bottom right or through the comment section below. We’ll try to help you solve the issues with your Windows.
The Windows Problem Reporting Service, also known as Windows Error Reporting (WER), is designed to collect information about software crashes and other issues, sending these reports to Microsoft to improve the overall system stability. However, some users may prefer to disable this service to prevent unnecessary resource usage or to enhance privacy. This guide will walk you through the steps to disable the Windows 11 Problem Reporting Service.
Why Disable the Problem Reporting Service?
Before proceeding, it’s important to understand the reasons why you might want to disable the Windows 11 Problem Reporting Service:
- Privacy Concerns: Some users prefer not to send error reports to Microsoft for privacy reasons.
- Performance: Disabling the service can potentially free up system resources, improving overall performance.
- Customization: Advanced users may want to manage error handling on their own without relying on the automatic reporting service.
Step-by-Step Guide to Disable the Problem Reporting Service
Method 1: Using Services
- Open the Run Dialog: Press
Windows + Rto open the Run dialog box. - Access Services: Type
services.mscand pressEnter. This will open the Services window. - Locate Problem Reporting Service: Scroll down and find the service named “Windows Error Reporting Service.”
- Stop the Service: Right-click on “Windows Error Reporting Service” and select
Stop. - Disable the Service: Right-click again, select
Properties, and in theStartup typedropdown, chooseDisabled. ClickApplyand thenOK.
Method 2: Using Group Policy Editor
- Open the Run Dialog: Press
Windows + Rto open the Run dialog box. - Access Group Policy Editor: Type
gpedit.mscand pressEnter. This will open the Local Group Policy Editor. - Navigate to Error Reporting: Go to
Computer Configuration>Administrative Templates>Windows Components>Windows Error Reporting. - Disable Error Reporting: Find the setting named “Disable Windows Error Reporting,” double-click it, select
Enabled, then clickApplyandOK.
Method 3: Using Registry Editor
Warning: Editing the registry can have unintended consequences if not done correctly. Proceed with caution and consider backing up the registry before making changes.
- Open the Run Dialog: Press
Windows + Rto open the Run dialog box. - Access Registry Editor: Type
regeditand pressEnter. This will open the Registry Editor. - Navigate to Error Reporting Key: Go to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting. - Modify Registry Values: Create or modify the
DisabledDWORD (32-bit) value and set it to1. This will disable the Windows Error Reporting service.
Re-Enabling the Problem Reporting Service
If you decide to re-enable the Problem Reporting Service in the future, follow the same steps but revert the changes:
- In Services, set the
Startup typetoManualorAutomatic. - In Group Policy Editor, set the “Disable Windows Error Reporting” to
Not ConfiguredorDisabled. - In Registry Editor, set the
Disabledvalue to0or delete it.
Conclusion
Disabling the Windows 11 Problem Reporting Service can be beneficial for users concerned about privacy, system performance, or who prefer to manage error handling themselves. By following the methods outlined above, you can easily disable this service and tailor your Windows experience to better suit your needs. Remember to proceed with caution, especially when modifying the registry, and ensure you fully understand the implications of disabling this service.
Readers help support Windows Report. We may get a commission if you buy through our links.
Read our disclosure page to find out how can you help Windows Report sustain the editorial team. Read more
The Windows 10 error reporting service is designed to help ensure your PC works optimally. The central idea behind Windows Error Report (WER) is to keep Microsoft informed about user issues working with Windows.
However, every Windows OS version has the service enabled on default settings. But an individual user can choose to disable it if the need arises.
This article explores how to enable or disable the error reporting service on Windows 10.
How the Windows 10 error reporting service works
Windows 10 Error Report focuses on discovering hardware and software issues from the user’s PC and reports to Microsoft.
With a database of likely complaints experienced with using the Windows 10, Microsoft can then send solutions for troubleshooting.
While working with the PC, some users experience pop-ups or alerts requesting the submission of the problem report.
Windows error report usually occurs after a system failure, program crashes, refused to load properly or operating system errors. W
Windows usually prompts the user to submit an error report online to help proffer solutions in the future. The problem report may include the program name, date, time of error, and version.
Should I disable the Windows problem reporting service?
Windows users often disable error reporting due to disk space or privacy issues but might need to exercise restraint. Error reporting service for Windows 10 offers dual benefits to Microsoft and PC users.
Each error report helps Microsoft develop more advanced service packs for dealing with glitches. That means a better user experience with Windows 10 based on the information gathered.
How can I disable the Window error reporting Service?
Just like other versions, Windows 10 does have a slightly different graphical user interface for disabling error reports.
Lower versions of Windows OS have error reporting under Action Center Setting. On Windows 10 it is the Security & Maintenance function that requires working with registries.
1. Use the Run dialog
-
1. Press down the Windows +R keys on your keyboard.
-
2. The Run dialog box will open.
-
3. Type service.msc in the box and click on OK or press Enter to run the command.
-
4. Locate the Windows Error Reporting Service in the list that opens.
-
5. Right click on it.
-
6. Go to the Startup type section and press the button next to it to open a drop-down menu.
-
7. Click on the Disabled button, which is at the bottom of the list.
-
8. Click on Apply and OK to save the changes.
-
9. Close the service window to exit. Now the process has been completed.
The easiest way to manage the Windows error reporting service is via the built-in Settings app. From there, you can enable or disable the problem reporting service in a few clicks.
- RELATED: 5 best software to fix runtime errors in Windows 10
In some cases, the Startup type which is close to disabled might appear gray. That means the user needs admin rights to continue the process. Therefore, log out and log in as an administrator. Or locate the administrative command prompt by pressing Windows key+ X to select command prompt admin.
2. Use the Registry Editor
Using the Registry Editor is another way to safely disable the Windows 10 Error Reporting Service. This second method for disabling the Windows error reporting service includes tweaking the registry. But first, you need to check for error report issues:
- Locate Control Panel from Windows startup.
- Click Control Panel> System and Security> Security and Maintenance.
- Look out for Report problems. Report problems should by default display ‘On’.
- RELATED: Fix Blue Screen of Death errors with these 4 software solutions
2.1 Steps to disable Windows Error Reporting Service using the Registry Editor
- Locate the registry editor app below:
- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting
- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting
- To the right of your window, locate the registry key in the dialog box.
- Click on the option ‘disabled’ so the dialog box can appear. Replace the value ‘0’ with ‘1’.
- If there is no value then create a new one with the same name, ‘Disabled’.
- To create a new DWORD from the registry editor, one needs to locate Edit > New on the menu.
- Then set the new 32-Bit DWORD value to ‘1’.
- Tap ‘OK’ to effect changes.
- Microsoft Office Lens: A Powerful Tool for Capturing and Organizing Information
- Swap Left/Right Speaker in Realtek Audio Console [How to]
- How to Get DirectX 12 End-User Runtime and Fix Installation Issues
- Overclocking in OMEN Gaming Hub: How to Use it
To confirm that the Windows error reporting service has been disabled, go to Security and Maintenance. Check the comment on the report problem to see if it reads on or off.
Can I enable the problem reporting service after I disable it?
To re-enable the error reporting service on Windows 10, simply set the disabled value back to zero.
Another option would be to delete the disabled value in the Registry Editor.
It’s quite simple to disable and enable Windows 10 error reporting service anytime. And understanding how to use the Registry Editor or finder makes everything much simpler.
Before you go, don’t miss our guide on Werfault.exe application error for more useful information.
We hope that our guide helped you disable this service. Let us know your thoughts in the comments section below.
Madalina Dinita
Networking & Security Specialist
Madalina has been a Windows fan ever since she got her hands on her first Windows XP computer.
She is interested in all things technology, especially emerging technologies — AI and DNA computing in particular.
Prior to joining the WindowsReport team, she worked in the corporate world for a number of years.