Jailbreaking is the process by which Apple’s operating systems are modified to remove restrictions and give greater user control over the device. These modifications typically allow running unsigned code, as well as reading and writing to the root filesystem,iPhone 5S Jailbreak iOS 12.4.8 With Checkra1n0.10.2 On Windows Pc. both of which are normally prevented by Apple. The increased privileges permit customizations and unfettered app installation which are not available to users with a stock device.iPhone 5S Jailbreak iOS 12.4.8 With Checkra1n0.10.2 On Windows Pc.Jailbreaking is most popular on, and most associated with, Apple’s mobile operating system iOS, though it also exists on tvOS and watchOS.
Typically, jailbreaking adds an unofficial application installer to your device which lets you download 3rd-party applications, tweaks, and extensions that are unavailable through the App Store. These packages open up endless possibilities to do things on your iOS device that a non-jailbroken iOS device would never be able to do.iPhone 5S Jailbreak iOS 12.4.8 With Checkra1n0.10.2 On Windows Pc.The most famous and largest of these application installers is called Cydia.Cydia houses tweaks which customise the look, feel, behaviour, and capabilities of your device in myriad ways, bypass limitations set in place by Apple and carriers, connect to other devices remotely, and generally let you take back your iOS experience.
How to make bootable pendrive Checkra1n 0.10.2 For Windows Pc ?
1# You need pendrive device.
2# Download Rufus and install it.
3# Download Checkra1n 0.10.2 img file.
4#Input pendrive on your pc.
5# Open balenaEtcher tool select img file and pendrive and last click start.
6# your pendrive ready to boot checkra1n0.10.2.
7# Open BIOS setting and select pendrive and open it.
8# Select the flash drive, and it should boot into the login prompt.
9#Quit checkra1n Enter Ctrl+Alt+ Delete.
How to iPhone 6 Jailbreak iOS 12.4.8 With Checkra1n0.10.2 On Windows Pc.
1: Download checkra1n from the download section listed below.Once downloaded, double click to mount the checkra1n.dmg. Drag the checkra1n app to your Applications folder. Open the Applications folder and launch checkra1n. You’ll receive a warning about obtaining programs from the internet; this is just a security precaution put in place by Apple. Launch System Preferences > Security & Privacy and click open anyway.
2: Connect your device to your Mac via a USB cable. If this is the first time connecting your device to your computer, you’ll need to trust the connection. On macOS 10.15 or newer, this is done in Finder. On macOS 10.14 or lower, this is done in iTunes. In either case, navigate to your device screen and click either “Trust” or “Continue”. Tap “Trust” on your device.
3: Next, launch Finder and click “Back Up Now”. While your device will (probably) be ok, it’s better to be safe than sorry. Backing up will ensure you have your data in case you need to restore at any point during the jailbreak process.
4: Click on Start inside checkra1n, followed by Next. Your device will enter Recovery Mode. Then enter DFU mode. The steps for this process will vary based on which device you have.
Note: the current timers inside checkra1n for how to enter DFU mode are a little off. That’s okay, just follow these steps:
How To enter duf mode
* iPhone X or iPhone 8:
a. Quickly Press and press and hold the Volume Down and Side buttons together for 4 seconds.
b. Release the Side button and continue holding the Volume Down button for 5-10 seconds.
* iPhone 7 or 7 Plus:
a. Press and hold the Volume Down and Side buttons together for 10 seconds.
b. After ten seconds, release the Side button and continue holding the Volume Down button for 5-10 seconds.
* iPhone 6s, iPad, or iPod touch:
a. Press and hold the Home and Side buttons together for 10 seconds.
b. After ten seconds, release the Side button and continue holding the Home button for 5-10 seconds.
If your device reboots during this process, start over. It may take a few tries, but keep doing it. Your device will enter DFU mode eventually. Get used to this process, as you’ll need to use it any time you wish to boot tethered.
5: Once in DFU, the iOS 13 jailbreak process will begin automatically. This could take some time, depending on your device, but it’s usually fairly quick, just remain patient and do not unplug it. That’s it! The jailbreak is done! Open the Checkra1n jailbreak app on your device and install Cydia. Launch Cydia and enjoy your jailbroken device on iOS 13 – iOS 13.3.
6:Booting Tethered: As mentioned above, this portion of the jailbreak will also need to be done any time you restart your device to use your “jailbreak stuff”. To boot tethered, enter DFU mode again (refer to the fourth step).
7:Jailbreak task done»iPhone 5S Jailbreak iOS 12.4.8 With Checkra1n0.10.2 On Windows Pc.».
If You Problem Show Same Post «iPhone 5S Jailbreak iOS 12.4.8 With Checkra1n0.10.2 On Windows Pc.»Join Video?
After following the steps in that order you should have successfully bypassed iCloud on your device. If not make sure you followed it correctly. Even after that if you could not make it just comment below i am happy to lend a hand.iPhone 5S Jailbreak iOS 12.4.8 With Checkra1n0.10.2 On Windows Pc. Latest Security post was written only because a lot of people like you keep supporting me. Have a nice day bye.
Checkra1n remains an immensely popular open source jailbreak tool that continues to thrive. By leveraging the checkm8 exploit, it allows installing Cydia on A5 to A11 iDevices running iOS 12 to iOS 16. Officially, it offers support for iOS 12, iOS 13, and iOS 14. However, the tool’s main engine also enables users to jailbreak iOS 15 – iOS 16.
Introduction to checkra1n Windows
checkra1n Windows was never officially released by the checkra1n Team, but there is iRa1n offering the same features for Windows users. iRemovalRa1n known as the checkra1n for Windows allows users to jailbreak iPhone 5s through iPhone X running on iOS 12.0 up to iOS 14.8.1. However, like checkra1n Windows also, iRa1n doesn’t offer support for iOS 15 or iOS 16.
An alternative method to jailbreak your iPhone from a Windows PC using checkra1n involves utilizing a Linux-based distribution specifically designed for jailbreaking iOS devices, such as checkn1x. This approach grants you the ability to execute the original checkra1n jailbreak directly from your PC, making a real checkra1n for Windows alternative.
checkra1n for Windows uses the checkm8 exploit to access the file system on your iPhone and install Cydia among other necessary jailbreak components. Using checkm8 exploit, it is possible to execute the code only when connecting your iPhone or iPad in DFU mode to the computer via a USB cable. Running checkra1n for Windows in a virtual machine environment will not work.
Checkm8 is capable of exploiting a wide range of iPhone and iPad generations, making them susceptible to jailbreaking. Devices spanning from the iPhone 4S (A5 chip) to the iPhone 8 and iPhone X (A11 chip) can be successfully targeted. However, it’s important to note that newer devices, including the iPhone 14, iPhone 14 Pro, iPhone 13 Mini, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 12, iPhone 12 Pro, iPhone 12 Mini, iPhone 12 Pro Max, iPhone 11 Pro, iPhone 11, iPhone 11 Pro Max, iPhone XR, iPhone XS Max, and iPhone XS, are not compatible.
Checkm8 bootrom exploit is also able to execute code iOS 15. Nebula, the developer behind Palera1n Jailbreak, released the first iOS 15 jailbreak based on checkm8 with tweak injection support on iOS 15.0 – 17. It also works up to iOS 17 on A9-A11 devices without tweaks.
A part of checkra1n jailbreak for Windows is also used by palera1n designed for all devices supported by checkra1n but running iOS 15 and iOS 16. If you are interested to jailbreak iOS 15 or iOS 16 on A5 – A11, you can use this tool to replace the checkra1n Windows edition. checkra1n itself is available for macOS, Linux, and even iOS to jailbreak one device from another.
Supported devices
checkra1n Windows supports all A5 – A11 systems on a chip (SoC) are supported by jailbreak. checkra1n compatibility reaches millions of Apple devices. Below, you can find the actual list of compatible iPhones and iPads that can be jailbroken using checkra1n for Windows.
- A5 – iPad 2, iPhone 4S, iPad Mini (1st generation).
- A5X – iPad (3rd generation).
- A6 – iPhone 5, iPhone 5C.
- A6X – iPad (4th generation).
- A7 – iPhone 5S, iPad Air, iPad Mini 2, iPad Mini 3.
- A8 – Phone 6, iPhone 6 Plus, iPad Mini 4.
- A8X – iPad Air 2.
- A9 – iPhone 6S, iPhone 6S Plus, iPhone SE, iPad (2017) 5th Generation.
- A9X – iPad Pro (12.9 in.) 1st generation, iPad Pro (9.7 in.).
- A10 – iPhone 7 and iPhone 7 Plus, iPad (2018, 6th generation), iPad (2019, 7th generation) (iOS 14 not supported).
- A10X – iPad Pro 10.5″ (2017), iPad Pro 12.9″ 2nd Gen (2017).
- A11 – iPhone 8, iPhone 8 Plus, and iPhone X.
How to use checkra1n on Windows
checkra1n for Windows can be obtained in the form of a native iRa1n software, making it easily accessible for Windows users. Alternatively, if you prefer to use the native checkra1n app on a Windows PC, you can do so by utilizing a Live CD that can be booted from a USB dongle.
In this guide, we will walk you through the necessary steps to effectively utilize checkra1n for jailbreaking your device directly from your Windows PC. Prior to beginning the process, it is essential to download and install the latest version of iTunes for Windows from the official Apple website. Don’t use iTunes installer from the Windows Store version, because it will not work.
checkra1n jailbreak for Windows
- Begin by downloading and installing checkra1n Windows (iRa1n) on your PC.
- Launch the checkra1n for Windows by opening the iRemoval PRO app.
- Within the app, locate and click on the “Jailbreak” button to initiate the iRa1n app.
- Connect your iPhone or iPad to your PC using a USB-A cable.
- Click the “Start” button to commence the jailbreaking process.
- iRa1n (checkra1n Windows) will put your device into Recovery Mode.
- Follow the onscreen instructions to enter DFU mode as prompted.
- checkm8 will exploit the system, resulting in booting into jailbreak mode.
- Access the Cydia app to explore various tweaks and apps available from Repositories.
Initially, the early versions of iRa1n (checkra1n for Windows) featured an interface similar to the checkra1n app, complete with the familiar app icon. However, in more recent iterations, the Windows jailbreaking tool has undergone some changes in terms of its appearance. Despite the visual differences, the tool remains user-friendly and straightforward to navigate. Rest assured, even with the updated interface, the process of using iRa1n on Windows remains intuitive.
Please note that this particular version of checkra1n for Windows is designed to support iOS 12, iOS 13, and iOS 14 only. If you wish to utilize the underlying technology of checkra1n to jailbreak iOS 15 or iOS 16, I recommend using Palera1n Jailbreak instead. Palera1n Jailbreak offers compatibility with the latest iOS versions and provides a support for iOS 15 and iOS 16 devices.
WinRa1n is checkra1n 0.1337.1 for Windows
WinRa1n for Windows is a jailbreak tool for iOS 12 – iOS 16 implementing checkra1n 0.12.4 and checkra1n 0.1337.1 as the main engine to enable tweak support on your iPhone or iPad. It works with all checkm8 devices A8 – A11 running iOS 12 – iOS 14, and iOS 15 – iOS 16. What’s more, this checkra1n Windows PC can also boot untrusted images on your iDevice.
With WinRa1n for Windows, jailbreaking A8 – A11 iDevices running iOS 12 – iOS 14 has never been easier using the checkra1n tool. However, the capabilities of WinRa1n go beyond that, as it also allows you to execute checkra1n 0.1337.1 and Palera1n v2.0.0 Beta 5, both compatible with iOS 15 and iOS 16. Notably, on the latest iOS firmware, WinRa1n installs the Palera1n loader, granting you the ability to perform tweak injections and install a package manager.
For A11 devices running iOS 16, there is an additional requirement to consider. If you have previously set a passcode on your device, you must erase all content and settings before proceeding with the jailbreak. This step ensures a smooth jailbreaking process on A11devices.
WinRa1n Windows is built upon the checkm8 exploit, which limits its support to A8 – A11 devices. Consequently, you can utilize this tool with various models, including iPhone 5S, iPhone 6, iPhone 6S, iPhone SE, iPhone 7, iPhone 8, and iPhone X. However, it’s essential to note that any iPhone models released after iPhone X are not compatible with WinRa1n jailbreak.
checkra1n on Windows from LiveCD
checkn1x is a compact Linux distribution, occupying a mere 28 MB in size, specifically designed for jailbreaking iOS devices using checkra1n from Windows. It serves as an exceptional solution for PC users who prefer utilizing checkra1n for Windows to jailbreak their iPhone 5s through iPhone X models, operating on iOS 12 up to iOS 14.8.1. With its compatibility with a wide range of iOS versions, checkn1x offers a reliable option for Windows users to use checkra1n.
To execute checkra1n on a Windows PC, this method necessitates the installation of a Linux distribution on a USB dongle. By doing so, you gain the ability to utilize the native checkra1n app on virtually any Windows PC. This approach ensures cross-compatibility and enables Windows users to leverage the functionalities of checkra1n jailbreak seamlessly.
- Begin by installing Etcher, which is available for Windows.
- Download the checkn1x ISO, and then open it using the Etcher app.
- Use Etcher to flash the checkn1x ISO onto your USB drive.
- Reboot your computer and access the BIOS boot menu.
- From the boot menu, select the USB drive that you prepared.
- Once your system boots up, run checkn1x.
- Press Alt+F2 to launch checkra1n on your Windows PC.
The official release of checkra1n Windows was never made available due to unresolved issues with the USB driver on Windows. This driver is crucial for exploiting your iPhone to gain access to the file system and install Cydia, which is used for managing tweaks. Unfortunately, the obstacles associated with the USB driver have prevented the release of checkra1n for Windows.
OpenRa1n contains checkra1n for Windows
OpenRa1n for Windows revolutionizes the jailbreaking experience by combining the power of palera1n and checkra1n into a single, user-friendly software. This cutting-edge tool enables iPhone users to effortlessly jailbreak their devices right from their native Windows environment. Gone are the days of relying on a USB stick running a Linux distribution to run Palera1n.
One of the standout features of OpenRa1n Jailbreak is its extensive compatibility. It fully supports all checkm8 devices, making it compatible with the latest iOS versions, including iOS 15 and iOS 16. Now, iPhone owners can enjoy the benefits of jailbreaking from a Windows PC thanks to mineek who released custom pongoOS booter for checkra1n 1337.
Kuba has over 20 years of experience in journalism, focusing on jailbreak since 2012. He has interviewed professionals from various companies. Besides journalism, Kuba specializes in video editing and drone flying. He studied IT at university before his writing career.
Post a comment
Do you want to jailbreak for iCloud bypass Windows computer?
How to jailbreak iPhone/iPad with computer
You must be need to jailbreak your iOS iPhone/iPad/iPod touch before you iCloud activation lock. As the jailbreak process on Windows Computer is a little Complicated, here is a full detailed tutorial for you to learn how to jailbreak your iOS devices on windows. If you following my tutorials you can jailbreak completed then you will can proceed for Bypass iCloud iPhone 5s to X.
Jailbreak for iPhone 5s through iPhone X, iOS 12 and up. Device model supported to jailbreak on iOS 12 to 14 (iPhone 5s to iPhone X).full support for A10/A10X devices — iPhone 5s to iPhone X, iPad (2018, 6th generation), iPad touch (2019, 7th generation).
limited support for A11 devices on iOS 14.x (Option > Skip A11 BPR check) — iPhone 8/8 plus\X. After jailbreaking A11 devices.
What Do You Need When Jailbreaking Your Device on Windows Computer?
Part 1: Here Guide to Jailbreak your iOS Device on Windows Computer
Preparations for Jailbreaking iOS on Windows
Prerequisites before Jailbreaking:
- Windows 10/8/7 32 or 64 bit
- USB flash drive with 4 GB, or more, capacity
- Download ubuntu .iso file
- Download rufus.exe to create USB drive for Ubuntu
- Download checkra1n-x86_64 file to jailbreak iOS in Ubuntu
Step 1.Insert your USB flash drive (Good quality).
Step 2.Open Rufus and run it . Once downloaded, the application is ready to use.
Step 3.Click the «Select» button and find the Ubuntu image you’ve downloaded. After selecting, the «ubuntu-20.04.1-desktop-amd64.iso» file Then click «Start«.
Step 4.Rufus will show a warning that all data on your live USB will be destroyed. Please backup your USB files if necessary and then click «OK«. Once an ISOHybrid image is detected, select the recommended option and click «OK«.
Wait for until when Rufus is creating USB flash drive of Ubuntu.
Click «Close» when the process completes.
Step 5. Restart your computer.
- Press the F12 or F9 shortcut key when the computer is turned on and before the operating system loading. Here my computer is Dell or HP.
SEE MORE:
- Here Checkra1n 0.12.3 iOS 14.5
- Here Checkra1n 0.12.4 iOS 14.5.1
Download All Equipment
SHARE THIS
Checkra1n is the permanent jailbreak tool for iOS 12 and higher versions to customize iPhone and iPads..
There are few Checkra1n tool releases. Please select your device model / iOS version to download the most compatible Checkra1n tool + guide
Checkra1n semi-tethered for iOS 12 – iOS 14.8.1 ( Limited- Check device list )
Checkra1n virtual for iOS 15 – iOS 16.7.10 ( All device models )
Checkra1n Mirror for iOS 17 – iOS 18.5 beta ( All latest device models )
CheckRa1n Jailbreak for Apple TV
Checkra1n for iOS 12 – iOS 14.8.1 Old devices
Checkra1n semi-tethered jailbreak tool available for iOS 12-iOS 14.8.1 jailbreak on Checkm8 devices.
Please make sure that Checkra1n compatibility for your device before downloading the Checkra1n Jailbreak tool.
Device compatibility (A5-A11 devices only)
iPhone 5S, iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6S Plus, iPhone SE (1st), iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPad Mini 2, iPad Mini 3, iPad Mini 4, iPad 5th, iPad 6th, iPad 7th, iPad Mini 4, iPad Air, iPad Air 2, iPad Pro 1st, iPad Pro 2nd, iPod Touch 6, iPod Touch 7
Note – Checkra1n Semi-tethered Jailbreak tool won’t work if you are using the following A12 & higher devices. You can use the Checkra1n Virtual Jailbreak as an alternative for the below latest devices.
iPhone XR, iPhone XS, iPhone XS Max, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone SE 2, iPhone 12 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPad 8, iPad Air 2, iPad Air 3, iPad 9, iPad Air 4
Checkra1n for MAC users
If you have an above A5-A11 device, MAC users can follow the below guides to Jailbreak your device using Checkra1n. Both video guide and step guide have been mentioned for your convenience.
Step guide
Step 01 – Tap the below button to download the Checkra1n dmg file to your Mac.
Step 02 – Drag the downloaded Checkra1n file into the Applications.
Step 03 – Connect the Mac and the device. Open Mac’s application folder > checkra1n > Contents > MacOS > Checkra1n_gui Terminal file. Now your device will be recognized by Checkra1n. Follow the special instructions when needed.
Step 04 – Click on the Start now. Then it will ask you to enter DFU Mode. Click on Next and it will guide you to enter the DFU Mode.
Step 05 – Again click the Start button and Turn the device into DFU mode by pressing the side button and Volume down button as the instructions right of the window.
Step 06 – Once entered DFU mode successfully, it will start the jailbreak process. Wait until complete and close the checkra1n application after completing the jailbreak process. Then the Checkra1n app will be added on your device homescreen.
Step 07 – Open the Checkra1n application from your device homescreen. Click on Cydia > Install Cydia> Done. Now Cydia on your device.
Special Instructions
- iOS 14 – iOS 14.8.1 running A11 devices can not jailbreak with a passcode enabled. Remove it before jailbreaking. You must check the “Skip A11 BPR check” box in the options view and boot the device without a passcode. This is not recommended hence this is effective for the device security, but still you can try this method.
- Also, it has some issues with USB-C on Apple Silicon macs when using A7, A9X, A10 and A10X devices. unplug and replug the lightning cable during the jailbreaking process when using USB-C on Apple Silicon macs with A7, A9X, A10 and A10X devices.
Checkra1n for Windows
Still Checkra1n Windows support is not available officially. According to the Checkra1n team, Windows support work is ongoing & will be added in a later release. Until then Windows users can use Checkra1n windows alternatives. It has several methods as follows
i. 3u Tools
ii. Ra1nUSB Jailbreak
iii. Ra1nstorm Jailbreak
iv. Bootra1n Jailbreak
v. piRa1n jailbreak
i. 3u Tools – Checkra1n Jailbreak for Windows users
3u Tools is a windows based universal application for restore, Install IPA Files, jailbreak or manage your iOS device. Now 3 u tools provide windows support for Checkra1n Jailbreak, because checkra1n officially is not available for windows.
Therefore, follow the Checkra1n jailbreak with 3uTools on Windows PC to complete the Jailbreak process. It requires a USB flash drive above 1GB storage.
Step Guide
Step 01 – Plug your USB flash drive to Computer. Download the 3UTools from the following button.
Step 02 – Run 3uTools from the computer. Then, go to Flash & JB-Jailbreak, tap Jailbreak & select “Make Checkra1n jailbreak USB flash drive.”
Step 04 – Now you can choose your USB Flash drive from the drop-down menu.
Step 05- Tap on the “start making” button, then tap ‘Yes’ for the popup message, You will get a Jailbreak U disk successful message. Then exit from the 3utools.
Step 06 – Plug your iPhone or iPad to Windows computer. Now Restart the computer. Once done, navigate to Boot Manager and select the USB drive from there.
Step 07 – Now you will get the Checkra1n jailbreak interface. Now tap Start > checkra1n options > Allow untested iOS/iPadOS/tvOS versions > OK. Follow onscreen instructions to put your device on DFU mode.
Step 08 – Your device will reboot and, Checkra1n app appears on your iPhone / iPad homescreen. Run the Checkra1n app to complete the Jailbreak process.
ii. Ra1nUSB Jailbreak
Ra1nusb is not a Jailbreak tool. It will help you to create a bootable USB on your Windows or Linux PC. It will boot with a pre-packaged version of macOS to run the checkra1n tool. It is a somewhat complicated method. You should have an 8GB USB drive.
Step Guide
Step 01 – Download Ra1nUSB according to your PC and balenaEtcher to create a bootable USB drive. Use the links below.
Intel PC
AMD PC
balenaEtcher
Step 02 – Plug your USB drive to thePC. Open Etcher, it will automatically detect your USB. Choose the Ra1nUSB image file that you have downloaded when prompted.
Step 03 – Navigate to your PC BIOS by pressing the F10/F12 or DEL. Disable the following features.
VT-D
EL SerialPort
SecureBoot
Stack Network
Fastboot
Wake on LAN
Then enable the Virtualization option and save the changes.
Step04 – Now let it boot from the USB drive. Select the Boot macOS Install from Ra1nUSB option. Again you need to choose Boot Verbose from Ra1nUSB during the process.
Step 05 – You can see the macOS-like installer screen if Ra1nUSB successfully works. Don’t tap on proceed with the installation of macOS. Tap on the Utilities from the top.
Step 06 – Then type “ra1nusb” in the Terminal window > Enter. It should open the Checkra1n jailbreak tool. Now connect your device with PC and you can go ahead with the Checkra1n Jailbreak process. Use the same MAC guide to complete the checkra1n Jailbreak.
iii. Ra1nstorm Jailbreak
Ra1nStorm is a utility pack that allows you to run Checkra1n Jailbreak on Windows and Linux. It is available Ra1nstorm 0.9.2 to run Checkra1n jailbreak on your Windows. Use the following unofficial ra1nstorm (KVM/IOMMU) guide with checkrain jailbreak. Then follow the Checkrain Mac guide to complete the jailbreak process.
Step Guide
Step 01 – Download Rainstorm to your Windows computer using the button below.
Step 02 – Run the downloaded rainstorm file to install MAC.
Step 03 – Now, Windows users can run Checkrain jailbreak using Windows computer.
Step 04 – Continue above Checkra1n jailbreak Mac guide.
iv. Bootra1n Jailbreak
Bootra1n is an alternative for linux+checkra1n on any PC using a USB Flash drive. This method is very similar to the Ra1nUSB method.
Step Guide
Step 01 – Download the bootra1n file.
Step 02 – Then unzip bootra1n file that consists of ISO file.
Step 03 – Write bootra1n to USB with Rufus. Press SELECT, open the ISO file, and press START to flash it to your USB drive.
Step 04 – Now Reboot your computer to get BIOS settings and select flash drive. Provide the following details to the login prompt.
Log in Name – anon
password – voidlinux
At the $ prompt, enter sudo checkra1n
Step 05 – Then proceed with Checkra1n Jailbreak.
v. piRa1n jailbreak
piRa1n will turn a Raspberry Pi 4 into a Checkra1n dongle and it allows you to jailbreak your device from anywhere without a PC.
Currently piRa1n only works with the Raspberry Pi 4. It is a very easy method, just connect the Raspberry Pi 4 to a power bank, then plug your iPhone or iPad to the Pi & put your iOS device to DFU mode. piRa1n will complete the process.
You will need to have the following components to complete this piRa1n process.
RAM Raspberry Pi 4 (1GB, 2GB, 4GB)
Type-C USB Cable
Lightning cable
5V/3A output Power bank
MicroSD Card ( 8GB or higher)
Step Guide
Step 01 – First set up the Raspbian. Download the Raspberry Imager software and install Raspbian “A port of Debian with the Raspberry Pi Desktop on your MicroSD Card.
Step 02 – Connect the MicroSD Card in the Raspberry Pi 4 and turn it on, connect and configure the OS with the on screen instructions.
Step 03 – Then you need to install piRa1n. Then open the terminal and Copy and paste the following command and enter.
cd /home/pi && git clone https://github.com/raspberryenvoie/piRa1n.git && cd piRa1n && sudo chmod +x install_piRa1n.sh && ./install_piRa1n.sh
Step 04 – Once done, Connect the Raspberry Pi 4 to a power bank. Then connect your iPhone or iPad to the Pi.
Step 05 – Put the device into DFU mode. Now piRa1n starts the Jailbreak process. Once completed the Jailbreak process the Pi will be shut down. Now you can unplug the Pi from the power bank.
Enjoy your CheckRa1n Jailbreak with NO PC using piRa1n!
pira1n is an easy way to create a portable CheckRa1n dongle.
Guide for Linux Users
It has added Checkra1n Linux support with the latest Checkrain update up to iOS 14.8.1. You just have to download the correct Linux Checkrain binary according to CLI builds of CPU types as follows. Then run the CLI.
Step Guide
Step 01 – Tap the below buttons to download the checkra1n Linux jailbreak file according to computer OS.
Step 02 – Launch the downloaded file. Open the terminal window and type the below commands.
chmod +x (drag and drop the checkra1n jailbreak folder on the terminal, enter)
Sudo (drag and drop the checkra1n jailbreak folder on the terminal, enter)
tep 03 – After that, it will ask your computer password (If you have setup), otherwise it will show the checkra1n Linux jailbreak on your Linux screen. Click on the Start button to go ahead with the CheckRa1n Jailbreak process. Steps remain the same as the above Mac guide.
Ra1nbox – Portable Checkra1n Jailbreak Solution using a Linux Board
Developer Fidelity88 has released on the go solution to CheckRa1n Linux users. This is a portable checkra1n jailbreak solution based on the NanoPi Neo2. With this method checkra1n runs together with the Ra1nbox software on this portable Linux board.
You need the following parts to complete the CheckRa1n jailbreak without a PC on iOS 12.3 – iOS 13.3 running A5-A11 devices including iPhone 5S to iPhone X. It should work with all the checkra1n compatible iOS versions too.
- NanoPi Neo2 Linux board
- Ra1nbox software
- Micro-USB power supply ( Ex: powerbank)
Checkra1n Android
Now you are able to jailbreak your device with Checkrain using an Android device. You don’t want to get Linux or PC or Mac support for this. Just follow the below steps to complete it.
Prepetition – Checkra1n compatible device, OTG cable, Rooted Android phone, termux app, any root file manager and lightning Cable.
Step 01 – Install Termux app and root file manager to your Android phone. Open Termux and let it update the repo.
Download Termux app
Download root explorer
Step 02 – Type and give the following commands one by one to upgrade the package.
Pkg update > press enter
Pkg upgrade > press enter
Apt update && upgrade > press enter
Step 03 – Minimize the termux app. Then open Checkra1n website from your android device. Download the Linux version.
Step 04 – Open root explorer > Locate download folder > copy checkra1n > Paste the copied Checkra1n to root directory > Data > Data > com.termux > files > home.
Step 05 – Open termux app again > Type su > press enter > click grant > type is > press enter > chmod + x checkra1n > press enter > type ./checkra1n -c > press enter.
Step 06 – Now connect iPhone with Android device using OTG cable. Turn off the passcode of your device. If you want to check the connection of the device and recognize it with Checkra1n or not, just type Isusb in Termux and press enter. If you are able to see your device iD there, the connection your devices have completed.
Step 07 – Type su > press enter type ./checkra1n -c > press enter to Put your device into recovery mode. Disconnecting your iDevice. again connect your iDevice with an Android device using cable.
Step 08 – Type Isusb > press enter. Now your device is ready to jailbreak. Type ./checkra1n -c > press enter again. Now put your device into DFU mode. Now it will begin to process the Checkra1n jailbreak. Finally your device has jailbroken with Checkrain using an Android device.
Checkra1n for iOS 15 – iOS 16.7.10 ( All device models )
Checkra1n semi-tethered Jailbreak tool is still not available for iOS 15 & higher, but Checkra1n virtual Jailbreak is available for iOS 15 – iOS 16.7.10 running all device models.
Compatible Device models – iPhone 14 All models, iPhone 13, iPhone 13 Mini, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 12, iPhone 12 Mini, iPhone 12 Pro, and iPhone 12 Pro Max, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone Xs, iPhone Xs Max, iPhone Xr, iPhone X, iPhone 8, iPhone 8 Plus, iPad Mini 2, iPad Mini 3, iPad Mini 4, iPad Air, iPad Air 2, iPad Pro, iPad mini, iPad 2, iPad 3rd gen, iPad 4th gen
Compatible iOS versions – iOS 15 to iOS 15.8.3 and iOS 16 to iOS 16.7.10 versions
Checkra1n virtual jailbreak
Checkra1n Virtual jailbreak is an easy online method to jailbreak iOS 15 & higher versions to install Cydia. (Can be used above latest device models running on iOS 12-iOS 14.8.1 versions too)This is compatible with all latest device models. This is popular as the alternative Checkra1n iOS 15 Jailbreak method. Later it was upgraded as an alternative Checkra1n iOS 16 Jailbreak method too.
Step guide
Step 01 – Tap the above button, then “download now”, “English version”, go ahead with the initial installation process. Open the app store, then tap on the virtual Checkra1n tab to install the profile.
Step 02 – Tap install > Allow, it will download the profile to your device settings.
Step 03 – Go to settings, tap on the profile. Then tap Install>Enter device passcode>Install>Done.
Step 04 – Now you can see the Checkra1n Virtual app on your device homescreen.
Step 05 – Open the app, then tap on the Checkra1n app, You can see the Loader page.
Step 06 – Tap on the Cydia icon to install the app. After a few seconds, you can see Cydia on homescreen.
Why should Checkra1n Virtual ?
- Checkra1n semi-tethered is a permanent computer based jailbreak. It can not be fixed via software update. But, it is still not updated for iOS 15 or iOS 16 versions.
- Also, it has some limitations using Checkrain. It works only for A5-A11 devices. The latest iPhone 14 models, iPhone 13 models, iPhone 12 and iPhone 11 models do not work with Checkra1n. On the other hand, Windows users have to use alternative complicated methods to run checkra1n Jailbreak process.
- There is no online Jailbreak for CheckRa1n. Mac users have to download the Checkra1n dmg file and connect the Mac and the device. Then it should recognize the device going through Mac’s application folder > checkra1n > Contents > MacOS > Checkra1n_gui Terminal file. Once done it can complete the jailbreak process with DFU mode.
- Also, Linux users have to download the linux file according to the computer version and run commands using the terminal window. Windows users have to use alternative methods somewhat hard: Ra1nUSB, Ra1nstorm, Bootra1n or pira1n. Ultimately we can not expect CheckRa1n online jailbreak tool..
- Checkra1n virtual is a non-system rooted jailbreak app installation method, while Checkra1n is a system rooted semi-tethered jailbreak.
- Checkra1n virtual does not void your device’s warranty, whereas Checkra1n does
- You may always uninstall and reinstall Checkra1n virtual. Don’t crash your iOS device after a restart, too. Your device must be restored in order to uninstall the Checkra1n jailbreak.
Checkra1n for iOS 17 – iOS 18.5 beta ( All device models )
Checkra1n Jailbreak is still not available for iOS 17 or iOS 18 versions. Its latest jailbreakable version is iOS 14.8.1. But there is a Checkra1n Mirror alternative for Checkra1n iOS 17 jailbreak as well as Checkra1n iOS 18 jailbreak.
Compatible Device models – iPhone 16 models, iPhone 15 models, iPhone 14 models, iPhone 13 models, iPhone 12 models, iPhone 11 models, iPhone Xs, iPhone Xs Max, iPhone Xr, iPhone X, iPhone 8, iPhone 8 Plus, iPad Mini 2, iPad Mini 3, iPad Mini 4, iPad Air, iPad Air 2, iPad Pro, iPad mini, iPad 2, iPad 3rd gen, iPad 4th gen
Checkra1n mirror
Checkra1n Mirror is the latest method to jailbreak iOS 17 & higher as well as iOS 18 & higher. It was introduced with iOS 17 for the first time and, now compatible with all iOS 17 versions as well as iOS 18 & higher versions. Checkra1n mirror can be installed on all the latest devices. It has an uncommon method, but it’s very easy when comparing Checkra1n semi-tethered tools.
Step guide
Step 01 – You can install Checkra1n Mirror from the above download button.through Pangu8 app manager. Pangu8 install Process will complete within a few seconds. You need to provide device passcode for this process.
Step 02 – Launch Pangu8 App manager from your device and tap Checkra1n Mirror Jailbreak tab, then > Install > Allow > Close. Checkra1n Mirror profile will download to the device settings.
Step 03 – Go to your device Settings > Profile download > Enter the Device passcode. It will download the Checkra1n Mirror app as well as Code Gen app.
Step 04 – Launch the Checkra1n Mirror app, Tap on the GO button.
Step 05- Then open the downloaded CodeGen app, Tap on the GET THE APP CODE button. Tap and hold to copy the code. Again open the Checkra1n Mirror app. Paste the copied code there > Continue > Run Exploit.
Step 06 – Install Cydia Client > Allow > Close the profile window > Go to Settings > Install > Provide the device passcode > Install > Done. Now you can see the Cydia app will be available on your device homescreen.
Apple TV Users
The checkra1n jailbreak has been updated with support for the Apple TV 4 for the very first time. The release was announced on Twitter by @nitoTV. Also, the latest Checkra1n 0.12.2 beta added Apple TV Jailbreak support up to tvOS 14.4.
Currently, it only works effectively on the fourth-generation Apple TV. Also, he said Owners would experience issues with DFU Mode if they attempted to use Apple TV 4K. It is available on a temporary site as follows.
Here is another Apple TV update that has been released.
Go to the Apple TV Jailbreak page for more details.
Checkra1n Official Site
checkra.in is the official site of Checkra1n jailbreak tool. According to them, official domains are checkra1n.com, checkra1n.io, checkra1n.dev & checkra1n.net. Further they say, avoid other similar-looking domain names as there are known-malicious sites/fake sites.
Common Checkra1n error codes
- Error code – 5
How to fix – If you are using a USB-A cable, remove it and use a USB- C cable or you can switch usb ports. Now quit the checkra1n application and open again. Also, you can restore your iPhone and get a frash Jailbreak with Checkrain.
- Error code – 20
How to Fix – Use Lightning to USB-A Cable Instead of USB-C to Lightning
Backup & Restore iOS With A Fresh Install
- Error code – 26 / 31 : Exploit Failed
How to fix – Try to jailbreak in safe mode(tweaks disabled),if that doesn’t work u can always restore root fs and rejailbreak
- Error code – 31 : Checking if device is ready
How to fix – Try using a standard USB-A 3.0 to Lightning cable rather than a USB-C to Lightning cable /try changing USB port
- Error code – 71
How to fix – Use the (USB Safe) option in the boot menu.
- Error code – 77
How to fix – Remove your passcode before starting the jailbreak, you can set it back once done.
- Error code – 78
How to fix: Exit checkra1n and double-check you entered sudo checkra1n.
- Secure Boot Errors
How to fix: You can disable Secure Boot in your BIOS settings.
- Graphics Errors
How to fix: Use the (Graphics Safe) option in the boot menu.
- ACPI Errors
How to Fix: On the boot menu, select RAM mode, then press TAB and add acpi=off nomodeset to the prompt.
Checkra1n Common Fact
- CheckRa1n is a permanent semi-tethered jailbreak for every iOS version running A5-A11 devices. It cannot be fixed without a hardware replacement. This is based on the unpatchable bootrom exploit called Checkm8. It’s called a check rain jailbreak also.
- Once complete the checkra1n jailbreak process it will automatically download Cydia. Currently, you cannot install Sileo or any other package manager with Checkra1n at this moment.
- Checkra1n tool’s developers are axi0mX (Checkm8 exploit developer), qwertyoruiopz (Luca Todesco), Argp, danyl931, jaywalker, kirb, littlelailo, nitoTV, nullpixel, pimskeks, sbingner, siguza, haifisch, jndok, jonseals, xerub, lilstevie, psychotea, sferrini, Cellebrite (ih8sn0w, cjori, ronyrus et al.), et al.
- CheckRa1n is similar to older BlackRa1n Jailbreak, limera1n Jailbreak, purplera1n Jailbreak. This was based on the bootrom exploit by George Hotz (geohot). It lets you select the package manager. It was used to Jailbreak all iOS devices running iOS 3.1, iOS 3.1.1 and iOS 3.1.2. It seems, Checkra1n followed that style. It will add Zebra package manager in future updates.
- The Checkm8 exploit which is used to develop CheckRa1n is tethered. But the tethered jailbreak has been around a long time. That is every time your iOS device boots or the battery dies, you have to connect your iOS device back to your computer. Then it boots with the aid of the jailbreak app. Now, this is not practical. Untethered was the most popular and hassle free method. There is no issue with rebooting the process with untethered. Nowadays, a popular method is semi-untethered. It is a process of activating Jailbreak through running the Jailbreak app and there is no required Computer support. However, CheckRa1n was released as a semi-tethered Jailbreak because it has a Jailbreak app.
- CheckRa1n will be compatible with upcoming iOS versions too. Because, it is based on the unpatchable bootrom exploit. Bootrom is the first significant code that runs on an iOS device. So, this is an unpatchable hardware based Jailbreak which can not be fixed through software update.
Checkra1n Jailbreak For Windows is a revolutionary jailbreak solution that has taken the iOS device community by storm. This powerful tool allows you to unlock the full potential of your iPhone, iPad, and other compatible Apple devices, providing you with a level of customization and control that’s simply not possible with the stock iOS experience.
Whether you’re a seasoned power user or a curious newcomer, the Checkra1n jailbreak offers a wealth of benefits that can enhance your mobile device experience in countless ways. From unlocking hidden features to installing custom tweaks and apps, the possibilities are truly endless.
Download Checkra1n Jailbreak For Windows No USB
In this comprehensive guide, we’ll explore the ins and outs of the Checkra1n jailbreak, focusing specifically on how you can utilize it on your Windows-powered devices. Get ready to dive into the world of jailbreaking and unlock the true power of your iOS devices!
What is Checkra1n Jailbreak?
Checkra1n is a unique jailbreak solution that takes advantage of a hardware vulnerability in certain iOS devices. Unlike traditional jailbreaks that rely on software exploits, Checkra1n leverages a hardware-based approach, making it a more stable and reliable option for users.
The Checkra1n jailbreak is compatible with a wide range of iOS devices, including the iPhone 5s up to the iPhone X, as well as various iPad models. This means that even if you’re rocking an older device, you can still enjoy the benefits of jailbreaking with Checkra1n.
One of the key advantages of Checkra1n is its semi-tethered nature. This means that while your device will need to be connected to a computer during the jailbreak process, it can still function normally and retain its jailbroken state even after a reboot. This is a significant improvement over previous jailbreak methods that required a full tethered process, which could be inconvenient for some users.
Benefits of Using Checkra1n Jailbreak
- Customization: Jailbreaking with Checkra1n opens up a world of customization options for your iOS device. You can install a wide range of tweaks, themes, and modifications to personalize your device’s appearance and functionality.
- Expanded Functionality: The Checkra1n jailbreak allows you to unlock hidden features and capabilities within your iOS device, giving you access to a wealth of additional functionality that’s not available in the stock iOS experience.
- Improved Productivity: Jailbroken devices can be outfitted with various productivity-enhancing tweaks and apps, helping you streamline your workflows and get more done on the go.
- Enhanced Security: Contrary to popular belief, jailbreaking can actually improve the security of your device in some cases. By disabling certain system components and installing trusted security tweaks, you can better protect your device from potential threats.
- Reduced Restrictions: The Checkra1n jailbreak helps you break free from the limitations and restrictions imposed by Apple, giving you a greater level of control and freedom over your device.
Checkra1n Jailbreak Compatibility
The Checkra1n jailbreak is compatible with a wide range of iOS devices, including:
- iPhone 5s, 6, 6 Plus, 6s, 6s Plus, 7, 7 Plus, 8, 8 Plus, X
- iPad Air, iPad Air 2, iPad mini 2, iPad mini 3, iPad mini 4, iPad (5th generation), iPad (6th generation), iPad Pro (1st generation)
- iPod touch (6th generation)
- iPhone 5S, iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6S Plus, iPhone SE (1st), iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS, iPhone XS Max, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone SE 2, iPhone 12 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max iPad Mini 2, iPad Mini 3, iPad Mini 4, iPad 5th, iPad 6th, iPad 7th, iPad Mini 4, iPad Air, iPad Air 2, iPad Pro 1st, iPad Pro 2nd, iPad 8, iPad Air 2, iPad Air 3, iPad 9, iPad Air 4, iPod Touch 6, iPod Touch 7
It’s important to note that the Checkra1n jailbreak is a semi-tethered solution, which means that your device will need to be connected to a computer during the jailbreak process. However, once the jailbreak is complete, your device can function normally and retain its jailbroken state even after a reboot.
Step-by-Step Guide to Installing Checkra1n on Windows No USB
- Download the Checkra1n Software: Visit the official Checkra1n website (checkra.in) and download the latest version of the Checkra1n software for Windows.
- Connect Your Device: Connect your iOS device to your Windows computer using a Lightning cable.
- Enter DFU Mode: Follow the on-screen instructions to put your device into DFU (Device Firmware Update) mode. This is a crucial step in the jailbreak process.
- Run the Checkra1n Software: Launch the Checkra1n software on your Windows computer. The program will automatically detect your connected device and guide you through the jailbreak process.
- Initiate the Jailbreak: Click the “Start” button in the Checkra1n software to begin the jailbreak process. The software will handle the rest, and your device will be jailbroken once the process is complete.
- Reboot Your Device: After the jailbreak is successful, your device will automatically reboot. Once it’s back up and running, you’ll be able to access the Cydia app, which is the primary package manager for jailbroken devices.
- Customize and Explore: Now that your device is jailbroken, you can start exploring the wealth of tweaks, themes, and customization options available through Cydia and other jailbreak repositories.
Remember, the Checkra1n jailbreak process may vary slightly depending on your specific device and iOS version. It’s recommended to follow the on-screen instructions carefully and refer to the official Checkra1n documentation for the most up-to-date and detailed guidance.
Alternatives to Checkra1n Jailbreak for No Computer Users
While Checkra1n is a fantastic jailbreak solution, it’s not the only option available for Windows users. Here are a few other alternatives you may want to consider:
- Unc0ver: Unc0ver is another popular jailbreak tool that offers a user-friendly interface and supports a wide range of iOS devices. It’s compatible with Windows, macOS, and Linux, making it a versatile choice for jailbreakers.
- Odyssey: Odyssey is a relatively new jailbreak solution that’s gaining traction in the iOS device community. It’s known for its stability and reliability, and it’s compatible with a variety of iOS devices.
- Electra: Electra is a well-established jailbreak tool that’s been around for several years. It offers a comprehensive set of features and is compatible with a wide range of iOS devices, including those running older versions of the operating system.
Each of these alternatives has its own unique strengths and weaknesses, so it’s worth researching and comparing them to determine which one best suits your needs and preferences.
Is Checkra1n Cydia Jailbreak Safe?
One of the primary concerns that many users have about jailbreaking cydia is the potential impact on the security and stability of their devices. However, when it comes to the Checkra1n jailbreak, the overall consensus is that it is a relatively safe and secure option.
The Checkra1n jailbreak cydia is based on a hardware vulnerability, which means that it doesn’t rely on exploiting software-based vulnerabilities that could potentially be patched by Apple in future iOS updates. This makes the jailbreak more stable and less likely to be broken by subsequent iOS releases.
Additionally, the Checkra1n team has a strong reputation for prioritizing security and stability. They work closely with the iOS security community to identify and address any potential issues or vulnerabilities that may arise.
That said, it’s important to remember that jailbreaking your device does come with some inherent risks. You’ll be installing third-party tweaks and modifications, which may not always be as thoroughly vetted as the apps and features provided by Apple. It’s crucial to exercise caution and only install tweaks and modifications from trusted sources to minimize the risk of introducing security vulnerabilities or stability issues.
Checkra1n MAC Download
Overall, Download Checkra1n jailbreak For Mac iOS devices is generally considered a safe and reliable option, but it’s essential to approach the process with a cautious and informed mindset to ensure the long-term security and stability of your device.
Conclusion and Final Thoughts on Checkra1n Jailbreak for Windows
Download Checkra1n jailbreak For windows and Mac is a game-changer for Windows users who want to unlock the full potential of their iOS devices. With its powerful features, extensive compatibility, and relative safety, Checkra1n offers a compelling solution for those who are eager to break free from the constraints of the stock iOS experience.
Whether you’re looking to customize your device, enhance its functionality, or simply explore the world of jailbreaking, the Checkra1n jailbreak For MAC And windows is a fantastic option that’s worth considering. By following the step-by-step guide provided in this article and taking the necessary precautions, you can safely and effectively jailbreak your iPhone, iPad, or other compatible iOS device using your Windows computer.
If you’re ready to take your iOS device experience to the next level, consider downloading the Checkra1n software and exploring the world of jailbreaking. With the right approach and a bit of patience, you can unlock a whole new realm of customization, functionality, and freedom. Don’t hesitate to dive in and discover the true power of your iOS device!