Before installation block the outgoing internet access by means of windows firewall or cord plug

Содержание

Block Outgoing Connections to the Internet with Windows Firewall
Adding Connection Rules
Use the Windows 7 Firewall to Block a Program From Internet Access
Block a Program From Internet Access via Windows Firewall
14 Comments
Before installation block the outgoing internet access by means of windows firewall or cord plug
SolidWorks 2020 Premium SP 1.0 (x64) (2020)

Block Outgoing Connections to the Internet with Windows Firewall

By default, Windows Firewall blocks incoming connections from the Internet unless the receiving program is on the exceptions list, but it does nothing to stop outgoing connections. Even if you uncheck or remove the program from the exceptions list, this change only affects incoming traffic, so the program can still access the Internet.

If you’re worried what a program might do with that privilege, such as sending error reports, submitting user data or automatically updating itself, you can block it with outbound rules through the firewall’s advanced settings. Once a blocking rule has been established, it remains on the list of configured rules, so you can quickly enable or disable it to control the program’s access.

Adding Connection Rules

1. Open the Control Panel (press “Win-X,” then select “Control Panel”) and click “System and Security,” “Windows Firewall” and then “Advanced Settings.”

2. Click “Outbound Rules” in the left pane and select “New Rule” in the right pane. To block incoming traffic, click “Inbound Rules” instead; the procedure for creating a new blocking rule is identical for inbound or outbound rules, except for the initial Inbound Rules or Outbound Rules selection.

3. Select “Program” and click “Next.”

4. Select “This Program Path,” click “Browse,” choose the program you wish to block and then click “Next.” If you choose “All Programs,” then Windows Firewall stops all outgoing (or incoming) connections.

5. Select “Block the Connection” and click “Next.”

6. Check when you want the rule applied and click “Next.” To totally block the program, select all the check boxes. If you only want to block the program when connected to, for example, a coffee shop’s public hotspot, only check “Public.”

7. Enter a descriptive name and click “Finish.” If you are establishing similar rules, make sure this name enables you to tell them apart, such as “Block Installed Chrome” versus “Block Chrome Portable.”

8. Test that the program is blocked by firing it up and attempting to access the Internet.

9. To later disable the rule, click the entry in the Inbound or Outbound Rules list and click “Disable Rule” in the lower right panel. If you see “Enable Rule” instead, it means the rule is currently disabled; click “Enable Rule” to make it active again.

10. Repeat the process, but select “Inbound Rules” in Step 2 to also block incoming traffic to the program.

Источник

Use the Windows 7 Firewall to Block a Program From Internet Access

If you’re careful about which programs you download, you probably don’t need to worry about them accessing the internet. But even when a program has a good reputation, you don’t have to leave your security to good faith.

Have you ever installed a program that you only needed for offline use, but it insisted on trying to connect to the internet? About four years ago we showed you how to allow programs through the Windows firewall. This time around we’re going to show you how to block them with it in Windows 7 and 8.

Block a Program From Internet Access via Windows Firewall

If you’re not sure which programs are accessing the internet, one easy way to find out is to open up Windows Resource Monitor. This can be done by searching for “resmon” in the start menu, or typing “resmon” into the Run Box (Windows Key + R). In this example, I noticed that the Everything app had networking activity and I’m going to block it to make sure it doesn’t send any data away from my PC.

To get started we need to open up Windows Firewall. One quick way to do this is from the Control Panel. Just click the Windows Firewall icon.

From the Firewall page click Advanced settings.

Here you can choose which you would like to block first: Inbound or Outbound. When it comes down to it I think blocking Outbound is usually enough for most applications. When Outbound connects are blocked, this means that the application can’t send any of your data to a remote server somewhere on the internet. Of course, if bandwidth is what you’re worried about you should probably block both. In any case, the process for blocking both is the same, so I’ll just cover one.

Click the New Rule… button.

For the “Rule Type” select the Program bullet and click Next.

Select the “This program path:” option and then either type in the path or use the browse button to find the executable of the application.

For the Action select the “Block the connection” option and click Next.

For the Profile tab, select all of the available boxes: Domain, Private, and Public.

You can name the firewall rule whatever you like. It’s a good idea to keep it something memorable or relevant though because you may want to change or disable it later on.

Now the rule should be created and ready to go. However some applications also run as a service, so be sure to disable that as well if you can. Right-click the newly created rule and select “Properties.”

From the Properties window select the “Programs and Services” tab and then click the Settings button.

Here click to “Apply to this service” and then select the service that matches up with the program blocked by the rule. If you can’t find a matching service, chances are your program didn’t install a service alongside it (so you can just cancel out). Click OK to save change sand exit from both this and the properties window.

That’s all there is for creating an Outbound rule. Now if you want, just repeat the process for an Inbound rule. And the program will be completely blocked from internet access.

If you want to temporarily give the application internet access again, you can disable the firewall rule by right-clicking on it within the Advanced Firewall Security window. If you want to permanently get rid of this blocking rule, just delete it.

This is such a good topic which you are discussed and i was looking for this type of firewall protection tricks for a couple of days.than bro for this article.

Thanks Austin! I’ve been looking for this information for a while. Your overview is brilliantly simple and very easy to follow.

Thanks for the reference to “resmon”, which I had forgotten all about but is certainly one of Win 7’s most handy features.

Some readers may be interested in the following posting (http://www.raymond.cc/blog/easily-determine-if-a-specific-software-is-secretly-connecting-to-internet-2/) which provides links to programs that monitor outbound connections.

No love for Netmon? I’m ashamed!

Smarten us up on it; Netmon sounds like something we all ought to love 😉

Java is constantly askig me to install updates which, in the past, has caused major headaches on my computer. Can I use this to block Java from advising about updates?

I’m glad you asked!. You could block Java with this, but that would be a BAD idea. Because Java is the most popular application platform in the world it is also the most exploited, and it needs to be updated regularly to prevent this from happening. In other words, Java needs all of the security patches it can get!

But, I complete agree with you. Java’s autoupdate is SUPER ANNOYING. But we found a way to work around this a couple years ago and it seems to still be working today.
Instructions are here:
https://www.groovypost.com/howto/geek-stuff/what-is-jusched-exe-safe-why-running-virus/

Thanks, Austin. The problem is that I think installing updates has also caused problems with my computer being suseptible to viruses and where I work, we have been warned about Java…

You’re right to be wary of Java, but let me give you some details on the recent Java scare that has been going around.

A few months ago some HUGE exploits hit the net that infected millions of computers worldwide. These exploits infected computers through a web browser (Chrome, Firefox, Internet Explorer, Opera, etc..) via a Java plugin. The only way to get infected by this virus was to visit a website that was executing the server side script. In most cases people were fine unless they visited an unscrupulous website, or a good website that had its server hacked and reprogrammed to run the virus.

As far as vulnerability goes, the server-side Java virus can really only infect Web Browsers that have the Java plugin installed. The virus travels through the web browser plugin and into Windows. Of course, any Java program that connects to random websites is a liability, but a Web Browser is really the only application that does so, so your non-browser Java applications should be fine.

A lot of programs require that you have the JRE (Java Runtime Environment) installed. This is a local Java platform that doesn’t connect to the internet, except to update. So you probably shouldn’t try to get rid of Java completely, and a lot of the vulnerabilities are fixed in the updates that you receive.

You really don’t need to worry about Java running on your desktop. However, you should definitely disable the Web Browser plugins in (Chrome, Firefox, or Internet Explorer) whichever you use. Please, please, please keep your Java updated. Failure to update is the #1 reason people get computer viruses.

Источник

SOLIDWORKS 2020 破解注册补丁

Uninstall (if exist) SolidWorks_Flexnet_Server from SW2019 SSQ’s release! To do it run as Administrator SolidWorks_Flexnet_Serverserver_remove.bat and wait until service «SolidWorks Flexnet Server» will be removed After that delete SolidWorks_Flexnet_Server folder from computer

Run «sw2020_network_serials_licensing.reg» and confirm to add info into Windows Registry

Install SolidWorks 2020 (including PDM Client if required). DO NOT install SolidNetwork License Server (SNL)! When asked of License Server definition input: 25734@localhost

3.1 If the System Check Warning window appears, ignore it (click Next to continue)

3.2 If the warning «SolidWorks Serial number was not found in activation database» appears, ignore it (click OK to continue)

3.3 If the full list of SW products to install is not visible, click «Select different package» and tick option «Select products not included in this package»

3.4 Select SW products to be installed

3.5 If the «The Installation Manager was unable to determine the current subscription expiration date. Would you like to reactivate your license to update this information?» appears, press No and press Yes in «Do you want to do it later?» prompt.

After end of setup overwrite original SolidWorks 2020 program folders (if exist) with cracked ones from folder «Program FilesSOLIDWORKS Corp» and «Program Files (x86)»

Folders to be replaced from «Program FilesSOLIDWORKS Corp» (at setup by default):

Folders to be replaced from «Program Files (x86)» (at setup by default):

Run «SolidSQUADLoaderEnabler.reg» and confirm to add info into Windows Registry

Run SolidWorks > Help > SolidNetWork License Manager > License Order

Use the «Move Up» and «Move Down» buttons to position Premium products with the same name higher than Professional and Standard products

Click «Apply» to save the settings

Click «OK» to close the SolidNetWork License Manager

Since SW2019 network licensing crack uses other serial numbers than the previous (SW2010-2018) versions then if you installed SW2020 on one same computer with SW2010-2018 you need to:

For SW2017-2018 reactivate them by running the corresponding SSQ’s SW2017-2018 Activator (run SSQ’s SW2017-2018 Activator, select proper SW verssion and click «Activate Licenses»)

For SW2010-2016 replace original SolidWorks 2010-2016 program folders (if exist) with cracked ones from folder «Program FilesSOLIDWORKS Corp» and «Program Files (x86)»

Folders to be replaced from «Program FilesSOLIDWORKS Corp» (at setup by default):

Folders to be replaced from «Program Files (x86)» (at setup by default):

Источник

SolidWorks 2020 Premium SP 1.0 (x64) (2020)

Версия программы: 2020 SP 1.0
Официальный сайт: www.solidworks.com
Язык интерфейса: Русский, Английский и другие
Лечение: в комплекте
Тип лекарства: замена файлов

Системные требования:
Windows 7 SP1/10 x64.

Описание:
SolidWorks – система автоматизированного проектирования, инженерного анализа и подготовки производства изделий любой сложности и назначения.
SolidWorks является ядром интегрированного комплекса автоматизации предприятия, с помощью которого осуществляется поддержка жизненного цикла изделия в соответствии с концепцией CALS-технологий, включая двунаправленный обмен данными с другими Windows-приложениями и создание интерактивной документации.

00. Если у вас уже установлен SW2020, взломанный SSQ, вы можете просто обновить существующий SW2020. Никаких дополнительных действий не требуется, так что вы можете пропустить шаги 1-5

00. Удалите (если существует) SolidWorks_Flexnet_Server из выпуска SWQ SW2019! Для этого запустите от имени администратора SolidWorks_Flexnet_Server server_remove.bat и дождитесь, пока сервис «SolidWorks Flexnet Server» будет удален. После этого удалите папку SolidWorks_Flexnet_Server с компьютера.

1. Запустите sw2020_network_serials_licensing.reg и подтвердите добавление информации в реестр Windows

2. Скопируйте папку «SolidWorks_Flexnet_Server» в C:, запустите от имени администратора «SolidWorks_Flexnet_Server server_install.bat» и дождитесь появления новой службы. Сервер SolidWorks Flexnet будет установлен и запущен

ВНИМАНИЕ!
Имя компьютера может содержать только английские буквы, цифры, тире (-) и знак подчеркивания (_).
Если имя вашего компьютера содержит прочие символы, вы должны переименовать его!

3. Установите SolidWorks 2020 (включая клиент PDM, если требуется). НЕ устанавливайте сервер лицензий SolidNetwork (SNL)! При запросе ввода определения сервера лицензий: 25734 @ localhost

3.1 Если появляется окно Предупреждение о проверке системы, проигнорируйте его (нажмите Далее, чтобы продолжить)
3.2 Если появляется предупреждение «Серийный номер SolidWorks не был найден в базе данных активации», игнорируйте его (нажмите OK, чтобы продолжить)
3.3 Если полный список устанавливаемых программных продуктов не отображается, нажмите «Выбрать другой пакет» и отметьте опцию «Выберите продукты, не включенные в этот пакет»
3.4 Выберите программные продукты для установки
3.5 Если «Менеджер установки не смог определить текущую дату истечения срока подписки. Хотите повторно активировать лицензию для обновления этой информации?» нажмите «Нет» и нажмите «Да» в «Хотите сделать это позже?» незамедлительно.

4. После завершения установки перезапишите исходные папки программы SolidWorks 2020 (если есть)
взломанными из папок «Program Files SOLIDWORKS Corp» и «Program Files (x86)»

Папки, которые нужно заменить из «Program Files SOLIDWORKS Corp» (при настройке по умолчанию):

C: Program Files SOLIDWORKS Corp eDrawings
C: Program Files SOLIDWORKS Corp SOLIDWORKS
C: Program Files SOLIDWORKS Corp SOLIDWORKS CAM
C: Program Files SOLIDWORKS Corp Композитор SOLIDWORKS
C: Program Files SOLIDWORKS Corp SOLIDWORKS Electrical
C: Program Files SOLIDWORKS Corp SOLIDWORKS Explorer
C: Program Files SOLIDWORKS Corp SOLIDWORKS Flow Simulation
C: Program Files SOLIDWORKS Corp Проверка SOLIDWORKS
C: Program Files SOLIDWORKS Corp Управление клиентом SOLIDWORKS
C: Program Files SOLIDWORKS Corp SOLIDWORKS PCB
C: Program Files SOLIDWORKS Corp SOLIDWORKS PDM
C: Program Files SOLIDWORKS Corp SOLIDWORKS Plastics
C: Program Files SOLIDWORKS Corp SOLIDWORKS Визуализация
C: Program Files SOLIDWORKS Corp SOLIDWORKS Visualize Boost

Папки, которые необходимо заменить из «Program Files (x86)» (при настройке по умолчанию):

C: Program Files (x86) SOLIDWORKS PDM

5. Запустите «SolidSQUADLoaderEnabler.reg» и подтвердите добавление информации в реестр Windows

6. Перезагрузите компьютер!

7. Запустите SolidWorks> Справка> Менеджер лицензий SolidNetWork> Заказ лицензи. Используйте кнопки «Вверх» и «Вниз», чтобы позиционировать продукты премиум-класса с теми же именами выше, чем у профессиональных и стандартных продуктов.
Нажмите «Применить», чтобы сохранить настройки
Нажмите «ОК», чтобы закрыть Менеджер лицензий SolidNetWork

Поскольку взломщик лицензирования сети SW2019 использует другие серийные номера, чем предыдущие (SW2010-2018)
версии, то если вы установили SW2020 на одном компьютере с SW2010-2018, вам необходимо:

Для SW2017-2018 активируйте их, запустив соответствующий SSQ SW2017-2018 Activator (запустите
Активатор SSQ SW2017-2018, выберите верную версию SW и нажмите «Активировать лицензии»)

Для SW2010-2016 замените оригинальные папки программы SolidWorks 2010-2016 (если есть)
с взломанными из папок «Program Files SOLIDWORKS Corp» и «Program Files (x86)»

Папки, которые нужно заменить из «Program Files SOLIDWORKS Corp» (при настройке по умолчанию):

C:Program FilesSOLIDWORKS CorpeDrawings
C:Program FilesSOLIDWORKS CorpSOLIDWORKS
C:Program FilesSOLIDWORKS CorpSOLIDWORKS CAM
C:Program FilesSOLIDWORKS CorpSOLIDWORKS Composer
C:Program FilesSOLIDWORKS CorpSOLIDWORKS Electrical
C:Program FilesSOLIDWORKS CorpSOLIDWORKS Explorer
C:Program FilesSOLIDWORKS CorpSOLIDWORKS Flow Simulation
C:Program FilesSOLIDWORKS CorpSOLIDWORKS Inspection
C:Program FilesSOLIDWORKS CorpSOLIDWORKS Manage Client
C:Program FilesSOLIDWORKS CorpSOLIDWORKS PCB
C:Program FilesSOLIDWORKS CorpSOLIDWORKS PDM
C:Program FilesSOLIDWORKS CorpSOLIDWORKS Plastics
C:Program FilesSOLIDWORKS CorpSOLIDWORKS Visualize
C:Program FilesSOLIDWORKS CorpSOLIDWORKS Visualize Boost

Папки, которые нужно заменить из «Program Files (x86)» (при настройке по умолчанию):

C:Program Files (x86)SOLIDWORKS PDM

00. If you already have SW2020 cracked by SSQ installed you can just update
existing SW2020 to this one. No additional crack is needed So you can skip
steps 1-5

00. Uninstall (if exist) SolidWorks_Flexnet_Server from SW2019 SSQ’s release!
To do it run as Administrator SolidWorks_Flexnet_Serverserver_remove.bat
and wait until service «SolidWorks Flexnet Server» will be removed
After that delete SolidWorks_Flexnet_Server folder from computer

1. Run «sw2020_network_serials_licensing.reg» and confirm to add info
into Windows Registry

ATTENTION!
The computer’s name can only contain English letters, numbers, dashes (-) and
lower accents (_).
If your computer’s name contains inappropriate symbols, you have to rename it!

3. Install SolidWorks 2020 (including PDM Client if required).
DO NOT install SolidNetwork License Server (SNL)!
When asked of License Server definition input: 25734@localhost

3.1 If the System Check Warning window appears, ignore it (click Next to continue)

3.2 If the warning «SolidWorks Serial number was not found in activation database»
appears, ignore it (click OK to continue)

3.3 If the full list of SW products to install is not visible,
click «Select different package» and tick option
«Select products not included in this package»

3.4 Select SW products to be installed

3.5 If the «The Installation Manager was unable to determine the current subscription
expiration date. Would you like to reactivate your license to update this information?»
appears, press No and press Yes in «Do you want to do it later?» prompt.

4. After end of setup overwrite original SolidWorks 2020 program folders (if exist)
with cracked ones from folder «Program FilesSOLIDWORKS Corp» and «Program Files (x86)»

Folders to be replaced from «Program FilesSOLIDWORKS Corp» (at setup by default):

Folders to be replaced from «Program Files (x86)» (at setup by default):

C:Program Files (x86)SOLIDWORKS PDM

5. Run «SolidSQUADLoaderEnabler.reg» and confirm to add info
into Windows Registry

7. Run SolidWorks > Help > SolidNetWork License Manager > License Order

Use the «Move Up» and «Move Down» buttons to position Premium products with
the same name higher than Professional and Standard products

Click «Apply» to save the settings

Click «OK» to close the SolidNetWork License Manager

Since SW2019 network licensing crack uses other serial numbers than the previous (SW2010-2018)
versions then if you installed SW2020 on one same computer with SW2010-2018 you need to:

For SW2017-2018 reactivate them by running the corresponding SSQ’s SW2017-2018 Activator (run
SSQ’s SW2017-2018 Activator, select proper SW verssion and click «Activate Licenses»)

For SW2010-2016 replace original SolidWorks 2010-2016 program folders (if exist)
with cracked ones from folder «Program FilesSOLIDWORKS Corp» and «Program Files (x86)»

Folders to be replaced from «Program FilesSOLIDWORKS Corp» (at setup by default):

Folders to be replaced from «Program Files (x86)» (at setup by default):

Источник

Hello friends my name is ravi mehariya. my this blog is for cad solution so first of we need to install a design software so i am going to tech you how to install SOLID-WORKS. So lets start it……

0. Before installation, block the outgoing Internet access by means of Windows
Firewall or cord plug. Check .NET Framework 3.5 and 4.0 are installed. If
.NET Framework 3.5 (including 2.0) is not installed, go to
«Control Panel» -> «Programs and Features» -> «Turn Windows features on or off» ->
-> select «.NET Framework 3.5 (including 2.0)»

1. Unzip the _SolidSQUAD_ folder into arbitrary writeable folder like (C:\Temp)

2. Run «SolidWorks.2017.Activator.SSQ.exe» as administrator (right-click on file)

2.1 Press «Change Serial Numbers» button, select «Force Local Activation Serial Numbers»
from drop-down list and press «Change Serial Numbers»

2.2 Press «Activate Licenses» button, select «SolidWorks 2017 Products» from drop-down
list, select products to activate by toggling «Activate» or «Skip» on every product
and «Details» to tweak features if required. Press «Activate Licenses» to activate
licenses. SolidWorks PDM Professional license (ex Enterprise PDM) license will be
also generated and prompted to save on disk as «sw_d.lic»

2.3 Close activator window

3. Install SolidWorks 2017 (including PDM Client if required). Dont install SolidNetwork
License Server (SNL).

4. After installation is complete, run activator as administrator (right-click on file)

4.1 Press «Copy Loaders» button, and press «Stop Services and Copy Loaders» to confirm.
All running services related to SolidWorks will be stopped and loader fixes copied
to appropriate directories.

4.2 Press «Activate Express Codes» button, and press «Activate» button to confirm.

4.3 (OPTIONAL) If activation of eDrawings Professional and SolidWorks Workgroup PDM Viewer
is required, press «Activate Miscellany Products» and press «Activate» button to confirm.

4.4 Close activator

5. (OPTIONAL) Use generated PDM Professional license file to feed SNL License Server as described
in «PDM / License Server Activation». If no PDM will be used, skip the step

6. Reboot computer

To activate SolidWorks 2010 — 2016 and 2017 under Local activation:

0. Run SW2010-2016 activator, select required products for 2010 — 2016
1. Run SW2017 Activator and follow «Local Activation on Client Computers»

Network License on PDM Server / License Server Computer:

1. Unzip the _SolidSQUAD_ folder into arbitrary writeable folder like (C:\Temp)

2. Run «SolidWorks.2017.Activator.SSQ.exe» as administrator (right-click on file)

2.1 Press «Change Serial Numbers» button, select «Force ?Network Floating Serial Numbers»
from drop-down list and press «Change Serial Numbers»

2.2 Press «Activate Licenses» button, select «SolidWorks 2017 Products» from drop-down
list, select products to activate by toggling «Activate» or «Skip» on every product
and «Details» to tweak features if required. Press «Activate Licenses» to generate
license file for SolidWorks and PDM Products (PDM Standard and PDM Professional) and
save it as «sw_d.lic»

2.3 Close activator window

3. Install SolidWorks PDM 2017, SolidNetwork License Manager (SNL), PDMWorks Workgroup Vault
(if required) and SolidWorks 2017 (if required)

4. Create «licenses» folder in SolidNetwork License Manager installation directory
(by default, «C:\Program Files (x86)\SOLIDWORKS Corp\SolidNetWork License Manager\licenses\»)
and copy «sw_d.lic» generated after step 2 to that folder.

4. After installation is complete, run activator as administrator (right-click on file)

4.2 (OPTIONAL) If SolidWorks 2017 is installed, press «Activate Express Codes» button,
and press «Activate» button to confirm.

4.3 (OPTIONAL) If activation of eDrawings Professional and SolidWorks Workgroup PDM Viewer
is required, press «Activate Miscellany Products» and press «Activate» button to confirm.

4.4 Close activator

5. Reboot computer

Network License on Client Computer:

1. Unzip the _SolidSQUAD_ folder into arbitrary writeable folder like (C:\Temp)

2. Run «SolidWorks.2017.Activator.SSQ.exe» as administrator (right-click on file)

2.1 Press «Change Serial Numbers» button, select «Force Network Floating Serial Numbers»
from drop-down list and press «Change Serial Numbers»

2.2 Dont activate anything, just close activator window

3. Install SolidWorks 2017 (including PDM Client if required). Dont install SolidNetwork
License Server (SNL).

4. After installation is complete, run activator as administrator (right-click on file)

4.2 Press «Activate Express Codes» button, and press «Activate» button to confirm.

4.3 (OPTIONAL) If activation of eDrawings Professional and SolidWorks Workgroup PDM Viewer
is required, press «Activate Miscellany Products» and press «Activate» button to confirm.

4.4 Close activator

5. Reboot computer

6. Enjoy!

If you have a some problem in installation than contact me on this mo.8141819243

Источник

00. Before installation, block the outgoing Internet access by means of Windows

Firewall or cord plug. Check .NET Framework 3.5 and 4.0 are installed. If

.NET Framework 3.5 (including 2.0) is not installed, go to

«Control Panel» -> «Programs and Features» -> «Turn Windows features on or off» ->

-> select «.NET Framework 3.5 (including 2.0)»

000. Uninstall (if exist) SolidWorks_Flexnet_Server from SW2020 SSQ’s release!

To do it run as Administrator SolidWorks_Flexnet_Server\server_remove.bat

and wait until service «SolidWorks Flexnet Server» will be removed

After that delete SolidWorks_Flexnet_Server folder from computer

1. Run «sw2023_network_serials_licensing.reg» and confirm to add info

into Windows Registry

2. Copy folder «SolidWorks_Flexnet_Server» to C: , run as Administrator

«SolidWorks_Flexnet_Server\server_install.bat» and wait until new service

«SolidWorks Flexnet Server» will be install and started

3. Install SolidWorks 2023 (including PDM Client if required).

DO NOT install SolidNetwork License Server (SNL)!

When asked of License Server definition input: 25734@localhost

3.1 If the System Check Warning window appears, ignore it (click Next to continue)

3.2 If the warning «SolidWorks Serial number was not found in activation database»

appears, ignore it (click OK to continue)

3.3 If the full list of SW products to install is not visible,

click «Select different package» and tick option

«Select products not included in this package»

3.4 Select SW products to be installed

3.5 If the «The Installation Manager was unable to determine the current subscription

expiration date. Would you like to reactivate your license to update this information?»

appears, press No and press Yes in «Do you want to do it later?» prompt.

4. After end of setup overwrite original SolidWorks 2023 program folders (if exist)

with cracked ones from folder «Program Files\SOLIDWORKS Corp» and «Program Files (x86)»

Folders to be replaced from «Program Files\SOLIDWORKS Corp» (at setup by default):

C:\Program Files\SOLIDWORKS Corp\eDrawings

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS CAM

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Composer

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Electrical

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Explorer

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Flow Simulation

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Inspection

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Manage Client

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS PCB

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS PDM

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Plastics

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Visualize

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Visualize Boost

Folders to be replaced from «Program Files (x86)» (at setup by default):

C:\Program Files (x86)\SOLIDWORKS PDM

5. Run «SolidSQUADLoaderEnabler.reg» and confirm to add info

into Windows Registry

6. REBOOT COMPUTER!

7. Run SolidWorks > Help > SolidNetWork License Manager > License Order

Use the «Move Up» and «Move Down» buttons to position Premium products with

the same name higher than Professional and Standard products

Click «Apply» to save the settings

Click «OK» to close the SolidNetWork License Manager

8. Enjoy

NOTE:

Since SW2019 network licensing crack uses other serial numbers than the previous (SW2010-2018)

versions then if you installed SW2023 on one same computer with SW2010-2018 you need to:

For SW2017-2018 reactivate them by running the corresponding SSQ’s SW2017-2018 Activator (run

SSQ’s SW2017-2018 Activator, select proper SW version and click «Activate Licenses»)

For SW2010-2016 replace original SolidWorks 2010-2016 program folders (if exist)

with cracked ones from folder «Program Files\SOLIDWORKS Corp» and «Program Files (x86)»

Folders to be replaced from «Program Files\SOLIDWORKS Corp» (at setup by default):

C:\Program Files\SOLIDWORKS Corp\eDrawings

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS CAM

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Composer

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Electrical

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Explorer

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Flow Simulation

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Inspection

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Manage Client

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS PCB

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS PDM

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Plastics

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Visualize

C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Visualize Boost

Folders to be replaced from «Program Files (x86)» (at setup by default):

C:\Program Files (x86)\SOLIDWORKS PDM

Источник

Local Activation on Client Computers:
0. Before installation, block the outgoing Internet access by means of Windows
Firewall or cord plug. Check .NET Framework 3.5 and 4.0 are installed. If
.NET Framework 3.5 (including 2.0) is not installed, go to
«Control Panel» -> «Programs and Features» -> «Turn Windows features on or off» ->
-> select «.NET Framework 3.5 (including 2.0)»
1. Unzip the _SolidSQUAD_ folder into arbitrary writeable folder like (C:\Temp)
2. Run «SolidWorks.2017-2018.Activator.SSQ.exe» as administrator (right-click on file)
2.1 Press Press «1. Set Serial Numbers» button, select «Force Local Activation Serial Numbers»
from drop-down list and press «Accept Serial Numbers»»
2.2 Press «Activate Licenses» button, select «SolidWorks 2018 Products» from drop-down
list, select products to activate by toggling «Activate» or «Skip» on every product
and «Details» to tweak features if required. Press «Activate Licenses» to activate
licenses. SolidWorks PDM Professional license (ex Enterprise PDM) license will be
also generated and prompted to save on disk as «sw_d.lic»
2.3 Close activator window
3. Install SolidWorks 2018 (including PDM Client if required). Dont install SolidNetwork
License Server (SNL).
3.1 If the System Check Warning window appears, ignore it (click Next to continue)
3.2 If the warning «SolidWorks Serial number was not found in activation database «appears,
ignore it (click OK to continue)
3.3 If the full list of SW products to install is not visible,
click «Select different package» and tick option
«Select products not included in this package»
3.4 Select SW products to be installed
3.5 If the «The Installation Manager was unable to determine the current subscription
expiration date. Would you like to reactivate your license to update this information?»
appears, press No and press Yes in «Do you want to do it later?» prompt.
4. After installation is complete, run activator as administrator (right-click on file)
4.1 Press «3. Copy Loaders» button, select «SolidWorks 2018 Products» and press
«Copy Loaders» button to confirm. All running services related to SolidWorks will be
stopped and loader fixes copied to appropriate directories.
4.2 Press «4. Activate Express Products» button, select «SolidWorks Xpress 2018 Products»
and press «Activate Xpress Products (RUN FOR EVERY USER)»
4.3 (OPTIONAL) If activation of eDrawings Professional and SolidWorks Workgroup PDM Viewer
is required, press «Activate Other Products» and press «Activate» button to confirm.
4.4 Close activator
5. (OPTIONAL) Use generated PDM Professional license file to feed SNL License Server as described
in «PDM / License Server Activation». If no PDM will be used, skip the step
6. Reboot computer
Network License on PDM Server / License Server Computer:
0. Before installation, block the outgoing Internet access by means of Windows
Firewall or cord plug. Check .NET Framework 3.5 and 4.0 are installed. If
.NET Framework 3.5 (including 2.0) is not installed, go to
«Control Panel» -> «Programs and Features» -> «Turn Windows features on or off» ->
-> select «.NET Framework 3.5 (including 2.0)»
1. Unzip the _SolidSQUAD_ folder into arbitrary writeable folder like (C:\Temp)
2. Run «SolidWorks.2017-2018.Activator.SSQ.exe» as administrator (right-click on file)
2.1 Press «1. Set Serial Numbers» button, select «Force Network Floating Serial Numbers»
from drop-down list and press «Accept Serial Numbers»
2.2 «2. Activate Licenses» button, select «SolidWorks 2018 Products» from drop-down
list, select products to activate by toggling «Activate» or «Skip» on every product
and «Details» to tweak features if required. Press «Activate Licenses» to activate
licenses. SolidWorks PDM Professional license (ex Enterprise PDM) license will be
also generated and prompted to save on disk as «sw_d.lic».
2.3 Close activator window
3. Install SolidWorks PDM 2018, SolidNetwork License Manager (SNL) and SolidWorks 2018
(if required)
3.1 If the System Check Warning window appears, ignore it (click Next to continue)
3.2 If the warning «SolidWorks Serial number was not found in activation database «appears,
ignore it (click OK to continue)
3.3 If the full list of SW products to install is not visible,
click «Select different package» and tick option
«Select products not included in this package»
3.4 Select SW products to be installed
4. Create «licenses» folder in SolidNetwork License Manager installation directory
(by default, «C:\Program Files (x86)\SOLIDWORKS Corp\SolidNetWork License Manager\licenses\»)
and copy «sw_d.lic» generated after step 2 to that folder.
5. After installation is complete, run activator as administrator (right-click on file)
4.1 Press «3. Copy Loaders» button, select «SolidWorks 2018 Products» and press
«Copy Loaders» button to confirm. All running services related to SolidWorks will be
stopped and loader fixes copied to appropriate directories.
4.2 Press «4. Activate Express Products» button, select «SolidWorks Xpress 2018 Products»
and press «Activate Xpress Products (RUN FOR EVERY USER)»
4.3 (OPTIONAL) If activation of eDrawings Professional and SolidWorks Workgroup PDM Viewer
is required, press «Activate Other Products» and press «Activate» button to confirm.
4.4 Close activator
6. Reboot computer
Network License on Client Computer:
0. Before installation, block the outgoing Internet access by means of Windows
Firewall or cord plug. Check .NET Framework 3.5 and 4.0 are installed. If
.NET Framework 3.5 (including 2.0) is not installed, go to
«Control Panel» -> «Programs and Features» -> «Turn Windows features on or off» ->
-> select «.NET Framework 3.5 (including 2.0)»
1. Unzip the _SolidSQUAD_ folder into arbitrary writeable folder like (C:\Temp)
2. Run «SolidWorks.2017-2018.Activator.SSQ.exe» as administrator (right-click on file)
2.1 Press «1. Set Serial Numbers» button, select «Force Network Floating Serial Numbers»
from drop-down list and press «Accept Serial Numbers»
2.2 Dont activate anything, just close activator window
3. Install SolidWorks 2018 (including PDM Client if required). Dont install SolidNetwork
License Server (SNL).
3.1 If the System Check Warning window appears, ignore it (click Next to continue)
3.2 If the warning «SolidWorks Serial number was not found in activation database «appears,
ignore it (click OK to continue)
3.3 If the full list of SW products to install is not visible,
click «Select different package» and tick option
«Select products not included in this package»
3.4 Select SW products to be installed
4. After installation is complete, run activator as administrator (right-click on file)
4.1 Press «3. Copy Loaders» button, select «SolidWorks 2018 Products» and press
«Copy Loaders» button to confirm. All running services related to SolidWorks will be
stopped and loader fixes copied to appropriate directories.
4.2 Press «4. Activate Express Products» button, select «SolidWorks Xpress 2018 Products»
and press «Activate Xpress Products (RUN FOR EVERY USER)»
4.3 (OPTIONAL) If activation of eDrawings Professional and SolidWorks Workgroup PDM Viewer
is required, press «Activate Other Products» and press «Activate» button to confirm.
4.4 Close activator
5. Reboot computer
6. Enjoy!
Cracked by TeAM SolidSQUAD-SSQ

Источник

How to Allow or Block a Program Through Firewall Windows 10.
Block any app from accessing Internet with one click in Windows 10.
Block all outbound traffic in Windows Firewall — gHacks Technology News.
Windows 10 Firewall — outbound ‘block all’ causes Windows to.
How to block outgoing connection of programmes in firewall.
How to block all outgoing connections? — Windows 10 Forums.
Block Firewall How In Solidworks To.
Webroot not blocking any outgoing traffic on windows 10 machines.
Windows Firewall: How to block Internet access for a program?.
How to Block a Program From Connecting to the Internet in Windows 10.
Mac Block Outgoing Connections App — skyeygot.
5 ways to open the Windows Defender Firewall — Digital Citizen.
How to Block Remote Connections to a Windows or Mac Computer.
Allow ssh protocol through win 10 firewall — Stack Overflow.

How to Allow or Block a Program Through Firewall Windows 10.

Allow Windows Consumer Features — Block; Allow Third-Party Suggestions in Windows Spotlight (user) — Block; Microsoft Store Organizations typically want to restrict the applications that can install on endpoints. Use this setting if your organization wants to control which applications can install from the Microsoft Store. By default, the Windows firewall is configured to allow all outgoing connections unless they are blacklisted and block all incoming connections unless they are whitelisted. Any program for which no.

Block any app from accessing Internet with one click in Windows 10.

Learn the simple steps to block or remove internet connection for some particular application running on Windows 11/10/7 using in-built «Windows Defender Firewall with Advanced Security». Well, there are many situations in which we need to revoke permission of some application to access the Internet connection on the system. Select Windows Firewall Properties on the window to change the default behavior. Switch the outbound connections setting from Allow (default) to Block on all profile tabs. Additionally, click on the customize button on each tab next to Logging, and enable logging for successful connections. How to Allow Programs Blocked by a Firewall on Windows 10. Open the Search box and type «firewall.». Open Windows Defender Firewall and go to «Advanced Settings.». On the left side of the.

Block all outbound traffic in Windows Firewall — gHacks Technology News.

How to Block or Open a Port in Windows 10/8/7 Firewall. 1. Open Windows Firewall and find the Advanced Settings. To open Windows Firewall, type ‘; into the search bar and press the Enter key. When ‘Advanced Settings’ opens, click the Advanced Settings link in the left-hand pane of the main firewall dialog box. This will. TCPBlock 2.10 — Block outgoing connection for any application ( little snitch alternative ) windows firewall outgoing block « Sekhar Padikkal’s macos Which free alternatives to Little Snitch can I. 27/07/2012 · I have configured Windows Firewall to block all outbound connections. The Windows Filtering Platform has blocked a connection. How to Block a Program From Connecting to the Internet in Windows 10 1. Type «Windows Defender Firewall» into the Windows 10 search bar and click on the first result. 2. Look toward the left.

Windows 10 Firewall — outbound ‘block all’ causes Windows to.

In the Windows Firewall, click on the «Advanced Settings» link on the sidebar to open Firewall Advanced Settings page. Now we need to create a new block rule in the Outbound Rules section. So, right-click on the «Outbound Rules» option on the sidebar and select the «New Rule» option.

How to block outgoing connection of programmes in firewall.

In the far right pane, click «New Rule» to create a new rule for outbound traffic. In the «New Outbound Rule Wizard,» confirm that the «Program» option is selected, and then click the «Next» button. On the «Program» screen, select the «This program path» option, and then type (or browse for) the path to the program you want to block. So, today I will talk about how to block Photoshop on the firewall on Windows 10 so that it cannot access the internet. Let’s get started with the tutorial. Open ‘Control Panel’ from the start menu. Click on ‘Windows Defender Firewall’ to open it. Now click on ‘Advanced settings’ on the left side of the windows defender firewall.

How to block all outgoing connections? — Windows 10 Forums.

Before installation, block the outgoing Internet access by means of Windows Firewall or cord plug Since we’ve changed the default port that Remote Desktop uses, we’ll need to configure Windows Firewall to accept incoming connections on that port Open port 2080 for adskflex, and open ports 27000 through 27009 for l Firewall Configuration In. How to block outgoing connection of programmes in firewall in Windows 10Please. Support me by (Like — Subscribe — Share -Comment). After that Windows Defender Firewall will block all outgoing connections to the specified website’s IP addresses. The following message will appear in your browser when trying to connect to the blocked site: Unable to connect. Or. Your Internet access is blocked Firewall or antivirus software may have blocked the connection ERR_NETWORK_ACCESS.

Block Firewall How In Solidworks To.

In the Windows Defender Firewall, you can click Advanced settings to enter into Windows Defender Firewall with Advanced Security app I have version 3 Additionally you can try changing the currently used proxy settings Block All Incoming Connections: Blocking all incoming connections will disable most of the sharing services like File Sharing, Screen Sharing and others Adobe Acrobat Reader DC. Click This PC on the left side of the window. Scroll down and double-click your hard drive’s name (e.g., OS (C:) ). Double-click the Program Files folder. If the program you want to block is elsewhere, go to the program’s folder instead. Find the folder for your program, then double-click the folder.

Webroot not blocking any outgoing traffic on windows 10 machines.

Allowed and block everything else. Windows Firewall monitors all the activity from the instance of opening of a connection until its closure. However, though it monitors the outgoing communications from the system, it will not block an automatic connection request made a program in the system. It allows the connection to happen.

Windows Firewall: How to block Internet access for a program?.

Control Panel -> System and Security -> Windows Defender Firewall -> Advanced Settings. Click on Inbound Rules in the left pane, and then click New rule in the right pane. On the Rule type screen in the New inbound rule wizard, select Port and then click Next. On the next screen, select the type of port and then enter the port number you want. Windows key + R -> WF 1. Click on «Windows Firewall properties» For each tab (Domain/Private/Public) follow these instructions: 1. Set «INBOUND CONNECTIONS» to BLOCK (default) 2. Set «OUTBOUND CONNECTIONS» to BLOCK 3. Click on «Customize» -> «Display a notification» -> Yes Windows Firewall will and does notify you when a connection is blocked. Hello, Discovered today that the latest build of Webroot on windows 10 computers don’t block any outgoing traffic, no matter what the settings are (allow or block). Also, the advanced settings the of firewall to block programs has no effect as well (I usually have it set to block all traffic unless explicitly allowed). Feel free to test yourself.

How to Block a Program From Connecting to the Internet in Windows 10.

Unblock the Internet for an App in the Windows Firewall. If you ever decide to allow your blocked app to access the internet again, you can do that as follows in your firewall: Search for Windows Defender Firewall with Advanced Security in the Start menu, and click it. Click Outbound Rules on the left to view your outgoing connection rules. Folder Firewall Blocker is a free open source program for Windows devices that lets you block inbound and outgoing connections of every executable file in a specified folder. One of the shortcomings of the Windows Firewall, and the majority of firewall programs for the matter for Windows, is that you cannot specify paths to block all executable. I’m looking for a simple, user friendly firewall for Windows 10 that enables the user to explicitly allow or block outgoing traffic per application. Or in some cases, only allow an application to connect to specific domains or addresses.

Mac Block Outgoing Connections App — skyeygot.

I ran into the same issue as @kernel-sanders, this key made many of my programs stop working, including docker, krisp, chocolatey, windows update, and many more.. All the errors in event viewer registered similar logs in event viewer. To allow Windows update in Windows 10 it’s not enough to allow just update service (at least not if you want restrictive firewall), here are minimum rules for Windows firewall: NOTE: I excluded rules for delivery optimizations and few others, which are also needed for Windows update as well as basic networking rules needed to block outbound.

5 ways to open the Windows Defender Firewall — Digital Citizen.

When you install and activate Windows Firewall Notifier, it enables the Windows Firewall (if its disabled) and sets it to block outgoing traffic by default. It then enables the outbound connection logging feature in the Windows Firewall and creates a scheduled task linked to the Windows Firewall events. There is only one way to do it, disconnect from physically to any network. Logged. Online scanners (URL/File/Java/others) — INDEPENDENT support (chat for Windows, Windows apps, and many other things), just state the problem/ask your question in the channel and have patience. Whenever we want to perform the block on the connecting client side, we need to open that client’s Windows Firewall and create a new outbound rule to block the TCP port 445 for the IP address of the machine hosting the share; conversely, if we want to shield the host from unwanted access we need to open the host Windows Firewall and create a new inbound rule blocking the TCP port 445 for the.

How to Block Remote Connections to a Windows or Mac Computer.

Create local firewall rules using Windows Firewall to block outgoing connections from AnyD; Block the resolution of DNS records on the domain. If you run your own DNS server (such as an Active Directory server) then this is easy: Open your DNS Management Console; Create a top-level record for ‘; Do nothing else. Run the setup wizard and follow its instructions. After OneClickFirewall is installed, open File Explorer and locate the executable file of the app you need to block from accessing the Internet. Right click it and select Block Internet Access from the context menu. That’s it. The application will be blocked and will not be able to connect.

Allow ssh protocol through win 10 firewall — Stack Overflow.

On a single endpoint or server Click Windows Update section to the left and then the Advanced options link This app ensures that the apps you add to the block list are not able to create any incoming or outgoing connections at all Now it’ll not show the dialog box and will connect to Internet as soon as you double-click on it To permanently. Most of the times your firewall will block some incoming and outgoing connections by default. If you have a strict firewall policy setup, then, unfortunately, you will not be able to connect to a remote computer. If the Remote Desktop feature has been blocked or not allowed through Windows Firewall, then you need to allow it.