Bad pool header windows 10 синий экран

The BAD_POOL_HEADER Stop Error in Windows 11/10/8/7 signified with the error code 0x00000019 indicates that the pool header is corrupted. A Bad Pool Header issue is caused due to problems with Windows memory allocation. This error usually occurs after you’ve installed new hardware or software – usually the antivirus software – that doesn’t work with your Windows computer. However, faulty drivers and routers, bad sectors or other disk write issues could also cause this Blue Screen.

Картинка с сайта: www.thewindowsclub.com

Fix BAD_POOL_HEADER Blue Screen on Windows

If you are unable to start Windows in Normal mode, try booting in Safe Mode. That will help as you work through a resolution. You can try the procedures listed below to resolve this issue. Go through the entire list of suggestions first and then decide which one or more of these you would like to try out.

1] Uninstall recently installed software

If you recently installed any software, uninstall it and see if that makes the error go away. Most of the time, third-party antivirus applications are responsible for the error. In case you have installed antivirus software products on your system, you can try uninstalling them temporarily. If this resolves the problem, you can replace them with other applications. In the Control Panel window, click on “Programs and Features” to open the list of programs installed on the system and uninstall the antivirus program – or the recently installed software.

2] Uninstall recently installed hardware

If you recently installed any hardware, open Devices Manager, find the hardware driver, right-click on it and select Uninstall. Restart your computer and see.

3] Disconnect external devices

Another cause of the error might be external devices that are interfering with the system. To isolate this cause, disconnect all peripherals and external devices except for the keyboard and mouse and restart your machine. Check if it resolves the issue. If it works, one or more of the previously connected external hardware devices might be faulty and need to be replaced. If this does not resolve the issue, you can try the next steps.

4] Disable Fast Startup feature

Disable Fast Startup feature and see. It is enabled by default in Windows. At times, it can interfere with the system and cause pool header corruption.

5] Update Device Drivers

Faulty drivers may cause issues. Though Windows Update updates all drivers, they can be manually updated as well if the former step doesn’t work. 

Картинка с сайта: www.thewindowsclub.com

To update device drivers, press Win + R and open the Run window. Type devmgmt.msc to open the device manager. In the list of drivers, right-click on individual drivers and select “Update Driver Software” for each driver. Update all of them one by one.

You could also use Driver Verifier Manager to examine the behavior of bad drivers.

6] Perform a Clean Boot

Perform a Clean Boot and check if it resolves the problem. If you face no issues, it means that some non-Microsoft process is causing this stop error. You will have to manually try and identify the offender.

7] Perform Hardware Clean Boot

A Hardware Clean Boot is different from the usual Clean Boot State. The hardware components that are not necessary for a system to run are disabled in the Device Manager.  

Картинка с сайта: www.thewindowsclub.com

Press Win+R to open the Run window. Type devmgmt.msc and press Enter to open the Device Manager. You may disable the drivers for the following devices by right-clicking them and selecting the option to disable them.

• Display Adapters.
• DVD/CD-ROM drives.
• Sound, video and game controllers.
• Network Adapters.
• Modems
• Ports
• USB Devices and controller – provided you are NOT using USB/Wireless Mouse or Keyboard.

Restart the system and verify if this fixes the error. If it does, then it means that one of these devices is the cause. Again you will have to try and identify the device manually by trial and error method.

8] Run Windows Memory Diagnostics Tool

You could also run the built-in Windows Memory Diagnostics Tool. Open the tool and click Diagnose your computer’s memory problems.? Once the run is completed, you may open the Event Viewer and look for the results in the MemoryDiagnostics-Results entry.

9] Check your RAM

This is usually done by a hardware expert, but it has been reported that the issue could be with the RAM. Therefore, it should be verified.

Hope something helps!

If you are an advanced user, you may visit Microsoft for more on this stop error.

See this post if you receive a BAD_POOL_CALLER error.

BAD POOL HEADER with error code 0x00000019 is one of the many Blue Screen of Death (BSOD) or Stop Errors that occur when Windows experience a problem with memory allocation due to failing storage drive, corrupt device driver, bad sectors, and other hard drive issues. It may also occur due to RAM errors.

Картинка с сайта: www.stellarinfo.com

A Blue Screen of Death (BSOD) or Stop Error is a protection measure by the OS to safeguard the system from severe damage due to a hardware or software failure. It occurs without any prior warning signs. BAD POOL HEADER 0x00000019 is a BSOD error that occurs when Windows experience a hardware problem with your system hard drive that contains the Windows OS. This hardware problem can occur due to aging or damaged system components such as hard drive and RAM, corrupt device drivers, and missing system files.

And when it happens, it usually turns out fatal for the file you are working on – it could be a video project, some important document, or presentation, etc.

Sometimes the file gets corrupt while many times the file goes missing or the changes made are not available. It also leads to file system error and drive corruption.

Follow the steps mentioned in the video to get back files safely and avoid further damage to lost data:

Below are some common cause for BAD POOL HEADER error and their fixes.

1. Disconnect External Drives and Devices

After the crash, unplug all USB devices from the system except Mouse and Keyboard and then turn on the PC. Use it normally. If the problem was the external device, the system should stop displaying the BAD POOL HEADER BSOD error.

Connect USB devices – one at a time – to check which peripheral device is causing the error. Replace the damaged peripheral device immediately once you find it.

2. Check Drive SMART Data

Self-Monitoring Analysis and Reporting Technology (SMART) is a feature that comes with all modern hard drives and SSD storage drives. The SMART monitors a storage drive for critical parameters such as Reallocated Sector Count and Current Pending Sector Count that can lead to BAD POOL HEADER.

Картинка с сайта: www.stellarinfo.com

You can use utilities such as Drive Monitor or CrystalDiskInfo to check the SMART status of your hard drive. The utility displays the current drive condition based on the parameter attributes RAW value.

3. Scan Disk for Bad Sectors

Bad sectors are a common reason for the BAD POOL HEADER error. While checking the SMART status of the drive, check if there is any warning sign beside ‘Reallocated Sector Count’ attribute. If there is a warning sign, your drive needs replacement as it may fail anytime due to unavailability of spare sectors, which is used to reallocate the bad sectors.

In case there is no warning, you can still scan the drive for bad sectors to know the drive condition better visually. For this, you need to run Drive Monitor utility.

Follow these steps:

• Install and run Stellar Data Recover Professional software.

• Click ‘Monitor Drive’ and then click ‘Scan Disk.’

Картинка с сайта: www.stellarinfo.com

• Select the hard drive from the drop-down at the top right and click ‘Scan.’

Картинка с сайта: www.stellarinfo.com

• After the scan, if you see too many red blocks, then you need to replace the hard drive to fix the error. The steps to safely replace the drive without losing data or your OS configuration are given in Step 8.

Alternatively, you can try a low-level format to reassess the bad sectors.

4. Test RAM

A faulty RAM could be the culprit behind BAD POOL HEADER 0x00000019 error. You can test RAM of your PC by using Windows RAM Diagnostic tool or a third party standalone RAM testing tool such as MemTest86.

To check RAM with Windows Memory Diagnostic Tool, follow these steps:

• Press Windows + S and type Memory Diagnostic.
• Click Windows Memory Diagnostic.
• Close all the program and then click ‘Restart now and check for problems (recommended)’.

Картинка с сайта: www.stellarinfo.com

To fix RAM errors, you can try swapping the RAM to different slot on your PC motherboard.

If no error is found, head to the next fix.

5. Check and Update Device Drivers

An outdated, corrupt, or damaged device drive can cause hardware errors. Drivers are a bridge between the hardware and the OS. If OS is not able to communicate with the hardware due to damaged drivers, it may crash to protect other vital components of the system.

Follow these steps to update or Reinstall the device driver:

• Turn on the system (preferably in Safe Mode) and open Device Manager.
• Right-click on Disk Drive and choose Uninstall Driver.
• Restart system and the drivers will be reinstalled from Windows updates.
• Alternatively, you can choose to update drivers manually. Just right-click on the drive in Device Manager and choose Update Drive.

Картинка с сайта: www.stellarinfo.com

• Choose the driver update or click “Search and install automatically.”
• You may also visit your hard drive manufacturer website to download the hard drive drivers and install them on your PC.

6. Check System File Integrity

Boot PC in Safe Mode and follow the steps given below to run a System File Checker (SFC) scan.

• Press Windows+S and type Command Prompt.
• Right click ‘Command Prompt‘ and choose ‘Run as administrator.’
• Now type SFC /scannow.
• Press Enter to begin the scan process.

The SFC scan will check system files for integrity, and if it finds a damaged (or missing) system file, it automatically replaces it with a new copy from the cache.

7. System Restore

System Restore can help you revert all recent changes made to your system that may have led to the BAD POOL HEADER crash error. To use System Restore option, follow these steps:

• Press Windows+S and type System Restore.
• Click System Restore and then click ‘System Restore’ button.

Картинка с сайта: www.stellarinfo.com

• Select the restore point from the given list and click ‘Next.’

Картинка с сайта: www.stellarinfo.com

• Follow the System Restore wizard atom restore your PC to a previous stable state.

Any program, including malicious programs that you may have installed unintentionally, will be removed from the system after the system restore.

8. Replace Hardware

If nothing helps, go for drive replacement. Changing drive should ideally fix the BAD POOL HEADER stop error. Buy a new hard drive or SSD and clone the existing drive so that the data remains intact. Also, you won’t have to install Windows since disk cloning creates a mirror copy of your hard drive with all partitions.

To clone a drive, connect a new drive to your PC:

• Run Stellar Data recovery Premium and click ‘Monitor Drive.’
• Select disks in Source and Target section.
• Click Clone Disk and accept the warning to begin the cloning process.
• Once cloning is done, turn off PC and replace the older hard drive with the new cloned hard drive or SSD storage.

Turn on the system and use normally, without worrying about the BAD POOL HEADER error.

Conclusion

Blue Screen error is essentially a protection measure by Windows OS to prevent serious damage due to critical hardware or software error. It safeguards other hardware and software components of the system from getting damaged. However, BSODs are sudden and may occur without any signs. Thus, it often results in a data loss situation.

To prevent BSOD error such as BAD POOL HEADER 0x00000019, one must actively monitor disk health, update Windows OS and drivers, and optimize the drive once in a while for better performance.

And to avoid data loss due to such errors, create at least two backups – one local on an external drive and another on the cloud storage. Use a data recovery software such as Stellar Data Recovery Professional to get back files that are not available in backup or lost due to BAD POOL HEADER 0x00000019 error.

How to Fix BAD_POOL_HEADER Blue Screen of Death Error in Windows 10

BAD_POOL_HEADER is a Blue Screen of Death (BSoD) error that appears when Windows encounters a critical problem from which it cannot recover. In this article, we describe tried and tested fixes to address this error.

Картинка с сайта: blog.pcrisk.com

The BAD_POOL_HEADER error is related to Windows memory allocation. However, the error can also occur due to other issues. RAM problems are usually the cause of the error, but problems with device drivers, bad disk sectors, and other disk write issues are also known to be common reasons for this error.

Fixing the BAD_POOL_HEADER error might require you to run the memory diagnostics tool, disable the Fast Startup feature, update drivers, temporarily disable installed third-party antivirus software, and other actions.

Note: If BAD_POOL_HEADER prevents you from starting Windows, you need to boot Windows into Safe Mode with Networking. Read this guide and use the «Interrupt Windows Boot Process» method. Then start Windows in Safe Mode with Networking from there.

Table of Contents:

• Introduction
• Temporarily Disable Your Antivirus
• Disconnect External Devices
• Run Windows Memory Diagnostic Tool
• Disable Fast Startup
• Update Your Drivers
• Perform a Clean Boot
• Check Your RAM
• Restore Your System Using Restore Points
• Video Showing How to Fix BAD POOL HEADER Error

Temporarily Disable Your Antivirus

If you recently installed antivirus software, this may be causing this BAD POOL HEADER error — many users have reported that temporarily disabling (or uninstalling) their antivirus software fixed the problem.

We recommend that you try this method even if you have been using your antivirus software for some time. If this solves the problem, contact the antivirus software developers and ask them if they can prevent their software from causing the BAD POOL HEADER error.

Read this guide if you are not sure how to disable your antivirus software. The article contains detailed instructions on how to disable some of the most popular antivirus programs.

[Back to Table of Contents]

Disconnect External Devices

Disconnecting external devices might fix the BAD POOL HEADER error. Connected external devices/peripherals might be interfering with the operating system. Disconnect all peripherals and external devices, and leave only the mouse and keyboard connected. Then restart the computer. Check if you still receive the BAD POOL HEADER error.

If the problem is resolved, one of the peripherals or external devices might be damaged or faulty, thus causing the problem. In this case, replace the peripheral or external device.

[Back to Table of Contents]

Run Windows Memory Diagnostic Tool

If there are problems with RAM (Random Access Memory), run the Windows Memory Diagnostic, a comprehensive memory test tool and easy to use.

To launch it, type «windows memory diagnostic» or «mdsched» in Search and click the «Windows Memory Diagnostic» result.

Картинка с сайта: blog.pcrisk.com

To run diagnostics, restart the computer. You will be asked if you want to restart now or run it the next time you start the computer.

When you restart the computer, Windows Memory Diagnostic Tool will start automatically. The testing process and results are displayed on the screen.

Картинка с сайта: blog.pcrisk.com

[Back to Table of Contents]

Disable Fast Startup

Fast startup is a useful Windows 10 feature that provides faster boot times on startup. Leaving fast startup enabled could be the reason for the BAD POOL HEADER error.

To fix the problem, you could disable this feature. Go to Search and type «power». Click the «Choose power plan» result to open it.

Картинка с сайта: blog.pcrisk.com

In the Power Options window, click «Choose what the power button do».

Картинка с сайта: blog.pcrisk.com

Click «Change settings that are currently unavailable» and then uncheck the «Turn on fast startup (recommended)» option (if it is enabled).

Click «Save changes» to save the changes made and see if this fixes the BAD POOL HEADER error.

Картинка с сайта: blog.pcrisk.com

[Back to Table of Contents]

Update Your Drivers

A device driver is software that informs the operating system and other software how to interact with particular hardware. If the appropriate driver is not installed, the device might not function properly (if at all) and deliver various blue screen of death errors, including BAD POOL HEADER.

To update drivers, open Device Manager by right-clicking the Start button and selecting the «Device Manager» result from the contextual menu, or type «device manager» in Search and click the «Device Manager» result.

Картинка с сайта: blog.pcrisk.com

In Device Manager, you will see a list of devices connected to your computer. Since it is difficult to ascertain which driver is causing the problem, you will have to update them all unless you have noticed particular circumstances under which the BAD POOL HEADER occurred.

For example, if the error occurs when you connect to the Internet, start with updating the Network adapter drivers. Right-click the device and select «Update driver» from the drop-down menu.

Картинка с сайта: blog.pcrisk.com

You will be asked to search for updated driver software automatically or to browse your computer for driver software. If you select the first option, Windows will search the computer and Internet for the latest driver software for the device.

If you select the second option, you must locate and install drivers manually. Using this option requires having previously downloaded drivers on your computer or USB flash drive — this is a long process since you will have to manually download all the latest drivers for all the devices by visiting device manufacturers’ official websites.

We recommend you select the first option and follow the instructions. Apply the steps to all devices.

Картинка с сайта: blog.pcrisk.com

Snappy Driver Installer (SDI) is a powerful free driver updater for Windows. Drivers are downloaded through Snappy Driver Installer in ‘driverpacks’, which are simply collections (packs) of drivers for various hardware such as sound devices, video cards, network adapters, etc.

It can also show duplicate drivers and invalid drivers. It separates the updates that require you to restart your computer so that they are easier to distinguish. You can download Snappy Driver Installer from here.

Alternatively, look for other automated driver updaters online to update all drivers.

Картинка с сайта: blog.pcrisk.com

[Back to Table of Contents]

Perform a Clean Boot

You can also fix this problem by performing a clean boot of the Windows 10 operating system. A clean boot starts Windows by using a minimal set of drivers and startup programs. This helps to eliminate software conflicts when you install a program or an update or run a program in Windows. Therefore, you must disable all third-party applications and services to ascertain if any of these applications are causing the BAD POOL HEADER error.

To perform a clean boot, type «system configuration» in Search and open the System Configuration desktop app.

Another way to access System Configuration is to type «run» in Search, open it, type «msconfig» and click OK to run it.

Картинка с сайта: blog.pcrisk.com

When System Configuration is opened, select «Selective startup» so you can make changes and unmark «Load startup items».

Картинка с сайта: blog.pcrisk.com

Then, go to the «Services» tab and mark the «Hide all Microsoft services» checkbox. This will hide Microsoft apps and services (because we need to disable only third-party applications). In our example, only two services remain. Click «Disable all».

Картинка с сайта: blog.pcrisk.com

Click «Apply» and «OK» to save the changes and exit the System Configuration window. It will inform you that you need to restart the computer to apply the changes. Choose if you want to restart now or manually later.

Картинка с сайта: blog.pcrisk.com

If this fixes the problem, you know that one installed third-party program is causing the problem. Finding which particular program is causing BAD POOL HEADER could be a long process since you must disable the programs one by one.

Additionally, if you wish to boot Windows normally, you will have to undo the changes to enable a Normal startup rather that Selective startup in System Configuration.

[Back to Table of Contents]

Check Your RAM

As mentioned in our introduction, the BAD POOL HEADER error can be caused by Random Access Memory (RAM) problems. It is possible that the RAM chip is not connected correctly or the slot (or chip) is dusty. If you know how to detach the RAM and reconnect it, we recommend trying this. Remove the RAM chip, ensure it is not dusty, and return it.

Do not do this when your computer is turned on. When you have finished, turn the computer back on and see if you still receive the BAD POOL HEADER error.

[Back to Table of Contents]

Restore Your System Using Restore Points

Finally, we would recommend you run System Restore using restore points. A restore point is a collection of important system files stored by System Restore on a given date and time.

To use this tool, you must have created restore points. With a created restore point, this feature will bring your system back to the previous working state, without affecting your files and data. If you have any system restore points created before the BAD POOL HEADER error started to occur, you might be able to fix it by simply restoring your system to a previous state.

To run System Restore, press the Windows Key + R and type «rstrui.exe». In the Run dialog box, press Enter or click «OK». Another way to open the Run dialog box is to right-click Start and select «Run» from the contextual menu.

Картинка с сайта: blog.pcrisk.com

The System Restore introduction window will appear. Click «Next» to proceed.

Картинка с сайта: blog.pcrisk.com

If there are restore points created, you will see a list of them. Mark the «Show more restore points» checkbox, which should display more restore points. Select the most appropriate restore point (depending on time created, etc.) and click «Next». Ensure that you do not select a restore point when the BAD POOL HEADER error was already present.

Картинка с сайта: blog.pcrisk.com

Confirm the restore point. Your computer will be restored to the state before the event detailed in the «Description» field. If you are happy with your choice, click «Finish» and begin the system restore process.

Картинка с сайта: blog.pcrisk.com

We hope that one of the above solutions fixed the BAD POOL HEADER error.

[Back to Top]

If all on a sudden a program terminates showing abnormal error messages, it might be Bad Pool Header BSOD in Windows 10 system. The Blue Screen of Death issue indicates the pool header has got corrupt. Error messages can appear at the time of starting a program or ending it as well. But the most annoying thing can ever happen after being affected with BSOD problem is Automatic Restart. In addition, you can have regular freezing of Desktop as well. The stop code has a bug check value of 0x00000019.

BAD_POOL_HEADER BSOD Error (Stop Code) in Windows 10 is mainly an outcome of old, outdated and defective device drivers. Furthermore, the issue occurs because of system resources shortage due to Virus infection, the conflict between similar programs, and outdated OS. Hard Disk Drive with bad sectors, lack of space owing to junk accumulation, connecting an additional HDD, allocating memory incorrectly are also responsible. BSOD errors are pretty dominant nowadays and they can cause serious damages. Today in this write-up, we will discuss some very effective workarounds who can resolve the mentioned issue easily.

Bad Pool Header BSOD Error in Windows 10

Here is how to fix Bad Pool Header BSOD Error (Stop Code) in Windows 10 –

Prevent the Automatic Restarting of Windows 10

Since Windows 10 tends to restart automatically at a regular interval with the BSOD error such as BAD_POOL_HEADER, it becomes the worst part of the issue. You can neither resolve the problem as there is no ample time nor can take it normally. In this point, you need to disable this annoying issue first so that to find the cause and deploy workarounds accordingly. Here is the way to proceed –

• Firstly, save an ongoing process in Windows 10 and move to Desktop by pressing Win and D keys together.
• Do a right click on This PC icon available here and also select Properties option.
• Upon arriving the System window on the screen, choose Advanced system settings from left side flank.
• In a moment, when System Properties popup unrolls, jump to the Advanced tab.
• Move ahead to the Startup and Recovery area, hit a click on Settings once you see it.
• With a new wizard hit on the display, proceed to its System failure section.
• Unmark the checkbox ahead of Automatically restart.
• Choose Ok located at the bottom and save these changes in Windows 10.

Now when you leave the wizard Windows will halt its Automatic Rebooting.

Run Full Windows Defender full scan to solve Bad Pool Header

Virus components after getting a chance to get inside of Windows 10, deteriorate the system files. As a result, plenty of them goes missing and result in Bad Pool Header BSOD Error (Stop Code) in Windows 10. Currently, it’s impossible to avoid them, so the best way to defend is to perform full scan regularly in Default Windows Security. You can accomplish the task in the following steps –

Step-1: Call in Taskbar Search by pressing Win+S.

Step-2: When it opens, you will come across an empty text area. Type Security and click on Windows Security from the top.

Step-3: Advance to the app, select Virus and threat protection option embedded on the left-hand side.

Step-4: Jump to the adjacent pane and make a click on the link saying Scan options.

Step-5: Prior to opening all the available methods, hit radio button before Full scan followed by choosing Scan now.

Step-6: When the detection ends, the system will show the result before you and if there is any virus present, select Clean threats option to dismiss them.

Step-7: In the consequent page, you can three options there. Hit Remove initially and then Start actions to begin cleaning vulnerabilities.

Get Cumulative updates to fix Bad Pool Header BSOD Error

Windows 10 Cumulative updates patches are the storehouses of the newest features and resolutions of issues. People often ignore these and leave them pending for a long time. As a result, the strength of the OS goes down and easily get caught by BSOD as Bad Pool Header BSOD Error. Since, it’s quite easy to install these Windows updates, let’s move for completing in below method –

Note – Manage to get connected with a speedy Internet connection so that to limit the time consumed for the downloading. Recommended using Wi-Fi or Ethernet connection. In lack of that, you can choose to use Mobile Hotspot but make sure Metered Connection is disabled first.

• Manage access to Windows Settings app using the combination keys Win+I pressed together.
• From the Home page, make a move for Update & Security and eventually make a click on it.
• After the following page appears, select Windows Update located at the left overlay.
• Jumping ahead to the corresponding pane, do a click on Check for updates link. Don’t bother if you see “You’re up to date” dialogue.
• After the update patches being visible here, hit Download option located beneath each and initiate.
• Installation will start. Make sure you restart the windows once asked.

When Windows will be updated, there are possibilities that, no Bad Pool Header BSOD Error will be present in your system.

Launch the Windows Device Manager and update the old drivers

In case of all BSOD issues, the culprit remains the same and this is nothing but an outdated, old device driver. You might have such a driver on your Windows 10 but never noticed really. Windows Device Manager comes handy in this case as outdated ones are indicated with Yellow mark inside the console. Follow the below guidelines to update them easily to fix BAD_POOL_HEADER –

• Hover the cursor on the left end of the Taskbar area and make a right click on Start.
• Choose Run and invite dialog upfront.
• In the search box provided here, type devmgmt.msc and choose Ok button.
• When Device Manager is launched, have a close look in the console for any exclamation marks beside the items in the list.
• Expand the device having indication first and again look for yellow indication on any driver.
• If have, do a right click on them only and select Update driver option.
• Drivers will be updated now automatically as you will follow the onscreen guidelines to accomplish that.

After the task is over, hopefully, Bad Pool Header BSOD Error will be resolved.

Boot Windows in Safe Mode – Ancient, reliable and all-time favorite workaround

Booting was Safe Mode is introduced to load only basic processes and services when Windows started its journey as an Operating System. Till then, it is recommended for every critical issue that Windows faces. This is reliable, and most favorite resolution to fix Bad Pool Header BSOD Error as they say. Proceed with the below instruction to complete the task –

• Press Windows logo key, type msconfig and then hit Enter.
• From the consequent wizard upon opening, move to its Boot tab and reach out to second half named Boot options.
• Next, check the box before Safe Boot and make grayed out options active.
• Moving ahead in the options, select the radio button before Minimal.
• From the bottom of this page, hit Apply and then Ok afterward to save these changes.
• Now, leave the Wizard and Reboot the windows initially following the usual method.
• When the Windows is booting next, keep on pressing F8 key continuously.
• After the following page come to view, choose Safe Boot options lying in the Advanced boot options area.
• Enter into the Safe Mode automatically in the next step.

Run the Top notch System File Checker to fix corrupted windows components

There are lot many reasons for which Windows System files fall into deterioration. DLL files go missing sometimes as well. All these together cause Bad Pool Header BSOD Error (Stop Code) in Windows 10. However, we can fix these two issues using a single tool and that is System File Checker. To access the utility, you have to run specific command in Elevated Command Prompt. Here is how to proceed –

• Open the Taskbar Search using shown guidelines.
• Type cmd.exe.
• Make a right click on Command Prompt when it is visible.
• Choose Run as Administrator option from the menu to proceed.
• When User Account Control prompts for authentication, select Yes to give approval.
• Being in the black window, type sfc /scannow command at the base of blinking cursor.
• Now, pressing Enter key will activate System File Checker and it will detect the corrupted system components and missing DLL files.
• Fixing will take place also automatically.
• Eventually, you can get rid of Bad Pool Header BSOD Error (Stop Code) in Windows 10.

Re-plug External Hard Drive

Some users over the years have experienced the worst consequences of BSOD errors only because of using an External Hard Disk. This is annoying though, the workaround is simple. Only disconnecting came out as fixing the BAD_POOL_HEADER issue. The complete procedure is as follows –

• Unplug all the External Hard Drives from ports and place them safely.
• Press Windows key and hit Power cog once Start menu spreads up.
• Select the Restart option and let it reboot completely.
• After performing the cycle of the restart, when head back to operation, perform a check for Bad Pool Header BSOD Error (Stop Code) in Windows 10.
• If the error is resolved, connect the external hard drive as they were back again.
• Now, you have to make a visit to its makers’ website using default browser.
• Download and install the up to date driver to use safely.

Run the ultimate BSOD tool – Windows Blue Screen Troubleshooter

Windows 10 is famous for its versatile operations and fixing issues with default utility. Seeing BSOD errors daunting, Microsoft came out with probably the best utility ever for Stop errors in Fall Creators Update edition. The Blue Screen Troubleshooter can solve your problem so easily and you need to rely on that. Being a default tool, you don’t have to download additional program stuff. Here is how to move to the utility –

• Open the Start menu using any convenient way.
• Upon launching, select the Gear icon and allow Windows Settings to appear.
• When in the app UI, move to Update & Security and eventually do a click on it.
• Once the next page loads, choose the Troubleshoot placed in the left-hand side.
• Jump next to adjacent right and reach out to Blue Screen.
• Expand it by making a click and hit Run the Troubleshooter option from elongated pane.

This built-in utility will now start checking for BSOD issues in the system and fix automatically. Once the process ends, there should not be any Bad Pool Header BSOD Error (Stop Code) in Windows 10.

Perform Disk Checking for Poor Areas inside of it

As of using for a long, you might notice some areas in the Hard Disk having bad. This will ultimately call in Bad Pool Header BSOD Error (Stop Code) in Windows 10. Resolving such areas in easy when you have powerful Disk Checking Utility beforehand. Follow the below guidelines to run the tool in Elevated Command Prompt –

• Invoke the Task Manager by making a right click on Taskbar and selecting it from menu.
• Hit File located at the top left corner and choose Run new task option.
• In the appeared Create a new task dialog, type cmd in the null text field.
• Moving ahead, check the box before dialogue “Create this task with administrative privileges”.
• Once you hit the Enter key, will be directly guided to the Elevated Command Prompt.
• In the black window, type in the following command –

chkdsk C: /f /r /x

Now, after pressing Enter key, Disk Checking will power up and start scanning for defective areas in the volume. Fixing will happen automatically as we have used significant characters with the base command tool “CHKDSK” explaining following –

• Operating System where Windows 10 is installed is represented by C:. You can replace it with D:. E: or any according to where you have installed the OS.
• The process will take a little longer, so wait with patience.
• When it ends, restart Windows 10 PC.
• After coming back in operation, see if there is any Bad Pool Header BSOD Error (Stop Code) in Windows 10.

Run the System Restore and go back to an earlier point

Sometimes changes made on the Windows 10 goes wrong due to the adverse effect on Registry. In that case, it’s wise to get back to the earlier state by performing System Restore. In order to solve BAD_POOL_HEADER Follow the below instruction and Undo the recent changes –

• Invoke the Run dialog by pressing Windows and R keys together.
• In the search box provided, type rstrui and press Enter.
• System Restore Wizard will unroll where you need to make a click on Next.
• Moving ahead to the next screen, mark Show more restore points to view all previous ones.
• Hit the latest one in the list and then choose the Next button located at the bottom.
• After the following window rolls in, select Finish to start the restoring.

Use DISM tool in Elevated Command Prompt to Fix Troublesome Windows image Files

Windows Image Files quite often fall in corruption and result in causing Bad Pool Header BSOD Error (Stop Code) in Windows 10.  “Deployment Image Servicing and Management” tool can be the ultimate solution for this issue and here is how to accomplish this –

• Access Elevated Command Prompt using the same process shown before.
• While in the dark window, type the following command where a cursor blinks –

DISM.exe /Online /Cleanup-image /Restorehealth

• Press Enter key TO execute the DISM tool and detect as well as fix defective Windows image files present in the system.
• Wait patiently as this process will end in a few minutes.
• Once it gets over, reboot the device and once starts again, check if Bad Pool Header BSOD Error (Stop Code) in Windows 10 has resolved.

Apply Disk Cleanup to Free up space and fix Bad Pool Header

Junk Files are created for the execution of tasks and stored in Disk storage. Day by day, these files keep on storing and when gets big, occupy huge space in the Drive. As a consequence, the Disk runs in low space, the device functionalities runs sluggishly and BSOD error like BAD_POOL_HEADER occurs. Disk Cleanup Utility can delete these all together and free up space. To complete the task, proceed with the below steps –

Step#-1: Open up Taskbar Search and type cleanmgr in the provided empty bar.

Step#-2: When Disk Cleanup Desktop app appears in the result, select it.

Step#-3: In a moment, a small wizard prompts for choosing preferable Drive to carry on freeing up.

Step#-4: Choose C: by clicking the dropdown menu and then press the Enter button.

Step#-5: Disk Cleanup tool will first calculate the recoverable space in the drive and show up wizard next.

Step#-6: Move to its tail end in the wizard and do a click on Clean up system files from there.

Step#-7: Do choose C: again when the small dialog comes up to select the desired disk and press Enter.

Step#-8: After the Disk Cleanup for C: wizard hit on screen, proceed to Files to delete region here in the popup.

Step#-9: Check all the boxes available leaving Downloads only.

Step#-10: Lastly hit Ok button to start the cleaning.

Important- Make sure there is nothing important left in Recycle Bin as they will be deleted as well. Restore if have any in the proper location.

Remove Similar Conflicting Programs from the system and stop their collision

If the Windows has two or more similar applications, they have a tendency to come in contact and eventually create conflict with one another. This act leads losing of System resources and Bad Pool Header BSOD Error makes the way out. To stop this annoying act, we can momentarily delete some of these. See how to uninstall a program from Windows –

• Open the Windows Settings by pressing the combination of Windows and I keys.
• While on the Homepage, reach Apps and select it to load more settings page.
• Choose Apps and features from left-hand side and also jump to the alongside pane.
• When the installed apps are loaded here, find out programs colliding and select them.
• Hit Uninstall option when visible in expanded pane.
• If UAC prompts for permission, choose Yes to continue.
• Keep following the on-screen instructions and remove them completely.
• Restart the Device upon finishing the process.
• When it starts next, check if there is Bad Pool Header BSOD Error (Stop Code) in Windows 10.
• If the issue resolves successfully, download and install the removed apps when required.

Throw out Troublesome Windows Update Files end in corruption

Cumulative update patches really don’t fall in manipulation too often. But of the autonomous Windows Updating terminates at midway, Bad Pool Header BSOD Error (Stop Code) may arise. As to resolve, these defective files need to remove from the system. The simple way to do this task is as follows –

• Open the Windows Settings app and reach to the additional setting page of Update & Security as shown before.
• When the page unrolls, choose Windows Update from left and jump to the corresponding right side.
• Here, perform a click on View update history link and move to the next window.
• Select Uninstall updates link located here and open up Installed Updates page from Control Panel as default.
• Reach out to the recently received update patch file and do a right click on it.
• Select Uninstall and start deleting it.

Deal with Windows Memory issues and fix RAM

Memory problems present in the RAM comes guilty for causing Bad Pool Header BSOD Error (Stop Code). Windows Memory Diagnosis will handle these things properly. Move ahead with below guidelines for that –

• Press Windows logo key, type ‘memory problems’  and hit Enter.
• When Windows Memory Diagnostic wizard cuts your view, choose “Restart now and check for problems (recommended)”.
• With the command, windows will prepare for the first cycle of rebooting.
• When it comes back to operation, a blue screen will appear and detect memory issues present in the system.
• As the progress rate is indicated in percentage, wait for it to reach 100%.
• Once it hits that, windows will again restart automatically.
• Report on this diagnostic will be available for you in the Notification area of System Tray.

Never Let a Third party Anti-virus program to stay-over in the system to resolve Bad Pool Header

Since Windows Security offers the best deal in malware issues, other anti-virus programs are useless in windows 10. Moreover, they can often cause Bad Pool Header BSOD Error (Stop Code) in Windows 10. Therefore, it’s legit to remove them if you have. Here is how to completely remove such an application –

• Unveil Run dialog on screen pressing Win+R keys.
• Type appwiz.cpl in the text box provided.
• Press Enter to open up Program and Features page coming from Control Panel.
• Move out to Third party Antivirus program listed.
• Select it and hit Uninstall when the option is available in the top ribbon.
• Start moving with the on-screen guidelines until this removes finally.

Till this point, we have elaborated and shown guidelines to deploy some most effective resolutions to fix Bad Pool Header BSOD Error (Stop Code) in Windows 10. Hope, you have already resolved the issue and doing well. In these workarounds could not come out victorious, the last resort will be a complete installation of Windows 10 again. If you can do that with perfection, there will be no more issues rising up next.

Before moving to Clean Installation, ensure the following things –

• Connect the device with the Internet recommended high-speed connection.
• Save a backup for all the necessary files to avoid losing them afterward. You can store them in USB or external drive preferably.
• Do the task with utmost perfection to limit issues arising up further. Seek help from skilled people or hire professionals in case of being less competent.

Hope, you will have no more Bad Pool Header BSOD Error (Stop Code) in Windows 10 after that.

Methods:
Way-1: Prevent the Automatic Restarting of Windows 10
Way-2: Perform Malware dismissal in Windows Security
Way-3: Get Cumulative updates
Way-4: Update the old drivers
Way-5: – Boot Windows in Safe Mode
Way-6: Run System File Checker
Way-7: Re-plug External Hard Drive
Way-8: Run Windows Blue Screen Troubleshooter
Way-9: Perform Disk Checking
Way-10: Run the System Restore
Way-11: Use DISM tool
Way-12: Apply Disk Cleanup
Way-13: Remove Similar Conflicting Programs
Way-14: Throw out Troublesome Windows Update Files
Way-15: Deal with Windows Memory issues
Way-16: Never Let a Third party Anti-virus program to stay-over in the system

That’s all!!