При просмотре журнала событий в Windows 11 и 10 некоторые пользователи могут обнаружить множественные ошибки «Application Error» с кодом события 1000 и категорией «События сбоев приложения», причем по названию сбойного приложения не всегда ясно, о чём идёт речь и чем может быть вызвана ошибка.
В этом материале о том, что можно предпринять в случае, если вы столкнулись с такими событиями в «Просмотре событий» и как исправить ситуацию.
Системные процессы в имени сбойного приложения
Выбрав событие с рассматриваемой ошибкой, ниже, на вкладке «Общие» вы можете увидеть информацию об имени сбойного приложения, сбойного модуля и другую. Часто ошибку вызывает какой-то системный процесс. Наиболее частые варианты:
- Explorer.exe — с большой вероятностью относится не к «Проводнику» как файловому менеджеру (но не исключено и это), а к системному процессу explorer.exe, использующемуся для отображения интерфейса Windows. Можно использовать варианты решения из статей Что делать, если не запускается Проводник и Постоянно перезапускается explorer.exe — варианты решения.
- Dwm.exe — менеджер окон рабочего стола. Среди возможных причин сбоев — проблемы с драйверами видеокарты (не только дискретной, но и интегрированной, попробуйте установить оригинальные вручную), использование различных программ и инструментов изменения внешнего вида системы.
- StartMenuExperienceHost.exe — процесс, отвечающий за меню «Пуск» в Windows. Возможные причины — сбои соответствующего приложения, изменение прав доступа к системным папкам, использование сторонних инструментов для модификации меню «Пуск».
- MsiExec.exe — установщик Windows, используется для установки и удаления программ. Возможные причины ошибки: повреждения системных файлов, удаление программ альтернативными методами с последующей попыткой использовать деинсталляции в панели управления.
- MsMpEng.exe — этот процесс является частью встроенного антивируса Microsoft Defender. Среди возможных причин его сбоев — отключение сторонними инструментами, наличие вредоносного ПО на компьютере (попробуйте выполнить проверку в KVRT), также может помочь сброс Microsoft Defender: откройте «Параметры» — «Система» — «Системные компоненты», нажать по «Безопасность Windows» (или по трём точками справа), открыть «Дополнительные параметры», затем использовать кнопку сброса.
- NVDisplay.Container.exe — этот процесс нельзя назвать системным, но часто проблема возникает с ним. Он относится к драйверам видеокарты NVIDIA, а помочь может чистая переустановка этих драйверов (при условии, что нет проблем с работой видеокарты, например, в случае перегрева или разгона).
Вне зависимости от конкретного системного процесса, для которого появляются ошибки Application Error с кодом события 1000, есть несколько общих подходов к исправлению:
- Если речь идёт о единичных редких ошибках, при этом система работает исправно, скорее всего всё в порядке и чего-либо предпринимать не следует: они присутствуют в журнале событий практически на любом компьютере и вероятнее всего вызваны определенным стечением факторов (процесс обновления, действия пользователя, принудительное завершение процессов), а не какими-то проблемами.
- Если ошибки стали появляться после недавних обновлений, можно попробовать их удалить, либо использовать точки восстановления системы.
- Попробуйте выполнить проверку и восстановление системных файлов Windows, по порядку выполнив следующие команды в командной строке, запущенной от имени Администратора:
dism /Online /Cleanup-Image /RestoreHealth sfc /scannow
- Если ошибки появляются после завершения работы и включения компьютера, но исчезают после перезагрузки (использования именно этого пункта, вместо «Завершение работы»), попробуйте отключить быстрый запуск Windows.
- Если речь идёт о каком-то ином процессе, не указанном в списке выше, найдите в Интернете, к чему он относится и что может вызывать его сбои.
- Может иметь смысл проверить работу системы в режиме чистой загрузки — если при этом ошибки исчезают, причина, вероятнее всего, в сторонних процессах и службах.
Дополнительно, попробуйте выполнить поиск по коду исключения из информации о событии — он может дать дополнительные сведения о том, что привело к ошибке.
Сторонние сбойные приложения
Если имя сбойного приложения не относится к системе Windows, а является сторонней программой, разбираться следует именно с ней:
- Как и в предыдущем случае, единичные редкие события Application Error обычно не говорят о каких-либо проблемах и, если всё работает исправно, могут быть проигнорированы.
- Если имя процесса вам ни о чём не говорит, найдите в Интернете, к чему он относится, чтобы было ясно, на что обратить внимание.
- В случае, если речь точно идёт о стороннем приложении, при этом вы его не устанавливали, попробуйте разобраться, откуда оно взялось на компьютере, проверить программы в автозагрузке, возможно, проверить компьютер на наличие вредоносного ПО и другие угрозы, если это обычное прикладное ПО, не нужное вам — удалить его.
- В ситуации, когда программа известна, но постоянно регистрирует сбои — попробуйте поискать в Интернете (или задать вопрос в комментариях ниже с указанием конкретного процесса), что именно в этой конкретной программе может к ним приводить — отсутствие необходимых компонентов в системе, влияние сторонних антивирусов, несовместимость с текущей версией Windows или что-то ещё.
- При наличии обновленных версий сбойной программы, попробуйте установить такую версию.
В случае, если самостоятельно разобраться не удается, предоставьте следующую информацию ниже в комментариях:
- Имя сбойного приложения и модуля
- Код исключения
- Закономерности появления ошибки, если они были выявлены
- Сообщает ли при этом сама программа или системный процесс о чём-то на экране
Эта информация поможет найти конкретное решение для вашей ситуации.
When an application or program crashes on your PC, you might notice an Event 1000 Application Error in the Event Viewer log. Event ID 1000 means the concern application has crashed due to unknown events. You will encounter the error ID and the file path of the application where it is stored. If you face this error, your application will close unintentionally, and you may not be able to launch it again properly. If you encounter this error more often, then it’s time to fix it now. We bring a perfect guide to help you resolve this error on your PC. Let’s begin!
Table of Contents
Several reasons contributed to this error, including the application itself. Also, if you have corrupt system files on your PC, you may face the error again. Here are a few other possible reasons that cause this error in your device.
- If any particular application frequently crashes, you may face this error due to application failure.
- The most common reason for this error is corrupt system files. When your system files are corrupt, some Windows components might fail, causing difficulties in launching the program.
- The presence of viruses, malware, and junk files may cause this error.
- A few outdated or incompatible drivers might not comply with your Windows version, causing this error.
- Your PC will require a .NET framework to manage and operate several applications. If you have an incorrect .NET framework, you will face this error.
- Outdated Windows versions might also stop the application from launching.
You must check whether the application is compatible with the system. Applications might crash if the system does not meet the requirements. For instance, the Windows version has to be 7 or above to download Discord. You can upgrade the Windows version, but any other hardware or CPU up-gradation is totally a different topic.
Here are a few simple troubleshooting methods to resolve the Event ID 1000 error. The methods are arranged from basic to advanced level. Follow them in the same order to attain the perfect results. Here we go!
Method 1: Perform Clean Boot
If you cannot recognize which application is causing you the trouble, you can perform a clean boot. For example, the issues concerning this error can be fixed by a clean boot of all essential services and files in your Windows 10 system, as explained in this method.
Note: Make sure you log in as an administrator to perform Windows clean boot.
1. Launch the Run dialog box by hitting the Windows + R keys together.
2. Type msconfig and click the OK button to open System Configuration.
3. The System Configuration window will appear. Next, switch to the Services tab.
4. Check the box next to Hide all Microsoft services and click on Disable all button as shown highlighted.
5. Now, switch to the Startup tab and click the link to Open Task Manager as depicted below.
6. The Task Manager window will now pop up. Switch to the Startup tab.
7. Next, select the startup tasks that are not required and click Disable displayed in the bottom right corner.
8. Exit the Task Manager and System Configuration window
9. Finally, restart your computer and check whether the issue is resolved.
Also Read: Fix Sea of Thieves Services Are Temporarily Unavailable Lavenderbeard
Method 2: Reset Winsock Catalog
To resolve this issue, you are advised to clear the DNS cache (ipconfig /flushdns), release and refresh NetBIOS names (nbtstat -RR), reset IP configurational settings (netsh int ip reset), and reset Winsock Catalog (netsh winsock reset). This can be made possible by using corresponding command lines as instructed below.
1. Press the Windows key, type Command Prompt and click on Run as administrator.
2. Now, type the following commands one by one and hit Enter after each command.
ipconfig /flushdns nbtstat -RR netsh int ip reset netsh winsock reset
3. Wait for the process to be completed and reboot your PC.
Check if you have fixed Event id 1000 error.
Also Read: Fix Command Prompt Appears then Disappears on Windows 10
Method 3: Repair System Files
Windows 10 users can automatically scan and repair their system files by running System File Checker. In addition, it is a built-in tool that lets the user delete files and fix this issue. Then, follow the below-mentioned steps.
1. Hit the Windows key, type Command Prompt and click on Run as administrator.
2. Click on Yes in the User Account Control prompt.
3. Type chkdsk C: /f /r /x command and hit Enter key.
4. If you are prompted with a message, Chkdsk cannot run…the volume is… in use process, then, type Y and hit the Enter key.
5. Again, type the command: sfc /scannow and press Enter key to run the System File Checker scan.
Note: A system scan will be initiated and it will take a couple of minutes to finish. Meanwhile, you can continue performing other activities but be mindful of not accidentally closing the window.
After completing the scan, it will show either of these messages:
- Windows Resource Protection did not find any integrity violations.
- Windows Resource Protection could not perform the requested operation.
- Windows Resource Protection found corrupt files and successfully repaired them.
- Windows Resource Protection found corrupt files but was unable to fix some of them.
6. Once the scan is finished, restart your PC.
7. Again, launch Command Prompt as administrator and execute the given commands one after the other:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Note: You must have a working internet connection to execute DISM commands properly.
Method 4: Run Malware Scan
Windows defender sometimes fails to identify the threat when any virus or malware uses the system files. This malware causes damage to the user’s system, steals private data, or spies on a system without the user’s knowledge. Few anti-malware programs will overcome any malicious software. Therefore, to avoid Event 1000 Application Error, run an antivirus scan in your system and check if the problem is solved. Then, follow the below-mentioned steps.
1. Hit Windows + I keys simultaneously to launch Settings.
2. Here, click on Update & Security settings as shown.
3. Go to Windows Security in the left pane.
4. Click on the Virus & threat protection option in the right pane.
5. Click on the Quick Scan button to search for malware.
6A. Once the scan is done, all the threats will be displayed. Click on Start Actions under Current threats.
6B. If there is no threat in your device, the device will show the No current threats alert.
Also Read: How to Fix Error 0x80300024
Method 5: Run Microsoft Safety Scanner
If you have not attained any fix by running an antivirus scan, you could use Microsoft’s professional scanning service. Microsoft Safety Scanner is a tool developed to eliminate any harmful programs from Windows PC. It is a standalone malware and virus scanner which is helpful to remove any malicious program triggering errors like Event ID 1000.
1. Download Microsoft Safety Scanner from the official website.
2. Run the downloaded setup file.
3. Select the box Accept all terms of the preceding license agreement and click Next.
4. Click Next in the next window.
5. Now, choose the type of scan (Quick scan, full scan, Customized scan) according to your need and click on Next.
6. Then, wait until the tool scans your PC for viruses, spyware, and other potentially unwanted software.
7. Once the scanning process is complete, the tool will provide you with a report of the detected and removed software. Click Finish to close.
8. You can also view the log results of the tool by pressing Windows + E keys to open File Explorer.
9. Paste the following path in the File Explorer, and you will see the log details as shown below.
%SYSTEMROOT%\debug\msert.log
Now, check if the issue has been resolved.
Method 6: Update Device Drivers
If the current drivers in your system are incompatible or outdated with the browser files, then you will face this issue. Therefore, you are advised to update your device and drivers to fix or avoid this issue.
1. Click on Start, type device manager, and hit the Enter key.
2. Double-click Display adapters to expand it.
3. Right-click on video driver (e.g. Intel (R) UHD Graphics) and choose Update driver as depicted below.
4. Next, click on Search automatically for drivers as shown.
5A. If the drivers have been updated already, it shows The best drivers for your device are already installed.
5B. If the drivers are outdated, then they will get updated automatically. Lastly, restart your PC.
Also Read: Fix DISM Error 87 in Windows 10
Method 7: Reinstall Device Drivers
If updating drivers did not fix Event id 1000 error, you can uninstall the network drivers and install them again. Then, follow the below-mentioned steps to implement the same.
1. Launch Device Manager and navigate to Network adapters.
2. Right-click on your wireless network driver (e.g. Qualcomm Atheros QCA9377 Wireless Network Adapter) and select Uninstall device, as depicted below.
3. Confirm the prompt by clicking on the Uninstall button after checking Delete the driver software for this device option.
4. Go to the HP official website.
5A. Here, click on the Let HP detect your product button to allow it to suggest driver downloads automatically.
5B. Alternatively, Enter your laptop serial number and click on Submit.
6. Now, select your Operating System and click Driver-Network.
7. Click on the Download button with respect to the Network driver.
8. Now, go to the Downloads folder to run .exe fileto install the downloaded driver.
Method 8: Reinstall NET Framework
NET framework in your PC is necessary for the smoother running of modern games and applications. Many programs have an auto-update feature for the NET framework, and thus it will be updated periodically when an update is pending in action. You can also manually install the latest version of the NET framework, as discussed below to fix Event 1000 application error.
1. Press the Windows key, type Control Panel and click on Open.
2. Set the View by as Category and click Uninstall a program.
3. Click Turn Windows features on or off.
4. Uncheck all the .NET Framework entries and click OK.
5. Restart the PC once you complete all the steps mentioned above.
6. Now, check any new updates from the Microsoft .NET Framework official site.
7. If there are any updates, click on the corresponding link and select the Download .NET Framework 4.8 Runtime option.
Note: Do not click on Download .NET Framework 4.8 Developer Pack.
8. Run the file from My downloads and check if the NET framework is installed successfully on your PC.
Finally, check if Event id 1000 error is resolved now.
Also Read: How to Fix Error Code 0x80004005
Method 9: Update Windows
If you did not obtain any fix by the above methods, then there are few chances that you might have bugs in your system. Installing the latest Windows updates will help you to fix any issues in your system. Hence, always ensure to update your system to its latest version. Otherwise, the files in the system will not be compatible with the system files, leading to the Event 1000 Application Error. Follow the below-mentioned steps.
1. Press Windows + I keys simultaneously to launch Settings.
2. Click on the Update & Security tile, as shown.
3. In the Windows Update tab, click on Check for updates button.
4A. If a new update is available, then click Install Now and follow the instructions to update.
4B. Otherwise, if the Windows is up-to-date, then it will show You’re up to date message.
Method 10: Reinstall the Specific Application
The last thing you have to try is reinstalling the application, which is causing you trouble. You can instantly identify which application is throwing this Event id 1000 error by retracing the location. After successfully identifying the location, try to reinstall the specific application by following the below-mentioned steps to fix Event 1000 application error.
1. Hit the Windows key, type apps and features, and click on Open.
2. Search for the app (e.g. Roblox) in the Search this list field. Select it and click on Uninstall, as depicted below.
3. Again, click on Uninstall to confirm it again.
4. Now, download and reinstall the app from the official website (e.g. Robox)
Recommended:
- Fix Warframe Launcher Update Failed Error
- Fix Discord JavaScript Error on Startup
- Fix STATUS ACCESS VIOLATION in Chrome
- Fix error 1500 Another Installation is in Progress
We hope that this guide was helpful and you could fix Event 1000 Application Error in Windows 10. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.
-
Home
-
News
- How to Fix Event ID 1000 Application Error on Windows 10/8/7
How to Fix Event ID 1000 Application Error on Windows 10/8/7
By Vera | Follow |
Last Updated
Have you seen the event ID 1000 application error in the Event Viewer log when an app crashes in Windows 10/8/7? If yes, you come to the right place. Here are five methods that are offered by MiniTool you can try to fix the app error easily and effectively.
Sometimes your Windows app crashes all of a sudden. When you go to the Event Viewer log, you can see one error code and the common one is the event 1000 application error. Let’s see the following figure! You see the Event ID is 1000. This means you cannot launch this program properly or software may close unexpectedly.
The event ID 1000 app error may occur due to several reasons, including corrupted system files, badly installed .NET Framework, etc. Now, it is time to address the problem. All the solutions are applied to Windows 10/8/7.
How to Fix Event ID 1000 on Windows 10/8/7
Run a System File Checker Scan
Before you try anything else, you should first ensure your Windows is indeed complete and no discrepancies exist. In many cases, if Windows system files are missing or corrupted, your computer won’t work as expected or runs into some unexpected errors like the Windows event ID 1000 error.
So you should run a System File Checker scan and see if this Windows utility scans and repairs any damaged file. Here is how to use the tool in Windows 10/8/7:
- Input cmd in the search bar and right-click Command Prompt to run this tool with administrative rights.
- Type sfc /scannow and press Enter.
- The verification process will take some time and you should exist Command Prompt until it reaches 100%.
Tip: Sometimes you may fail to run a sfc scan with an error message saying “Windows resource protection could not perform the requested operation” or “Windows resource protection could not start the repair service”. To get the solutions, refer to this post – Quickly Fix SFC Scannow Not Working (Focus on 2 Cases).
Reinstall the Program
If you get the event ID 1000 error, perhaps the program itself goes wrong. So you can try uninstalling and installing it again to troubleshoot your issue.
1. Open Control Panel in Windows 11/10/8/7 and list all the items by large icons.
2. Click the Programs and Features link to the app list.
3. Right-click on the problematic program and choose Uninstall to remove it.
4. Restart your PC, get the latest version of this program and install it on your computer again. Try opening it to see if the error appears.
Scan for Malware for Windows 10/8/7
Malicious software, spyware, viruses, and ransomware on your computer can also give rise to application error 1000. So, you can run antivirus or anti-malware program to scan your PC and remove viruses and malicious software.
Malwarebytes, McAfee, Norton, etc. can be a professional virus or malware removal. Just download one of them from its official website to have a scan.
Reinstall .NET Framework
For numerous programs, they need .NET Framework, otherwise, they cannot operate smoothly. If the Framework is badly installed or gets damaged, the event ID 1000 error may appear in the event logs.
1. Press Win + R to launch the Run tool.
2. Input appwiz.cpl and click OK.
3. Click Turn Windows features on or off.
4. Expand the contents of the .NET Framework and deselect all the entries.
5. Use a .NET Framework cleanup tool to remove this feature.
6. Restart your PC.
7. Get the latest version of the .NET Framework and install it to your computer again.
Update Windows
Windows operating systems may get into a bugged state and some services & modules don’t work properly. To fix the event ID 1000 application error, you can try upgrading Windows to the latest build.
Take Windows 10 as an example:
- Go to Start > Settings > Update & Security.
- Click Check for updates.
- Then, Windows will check for available updates and download them. After that, restart your PC to finish the installation.
Perform a Clean Boot
Some services may conflict with some applications; as a result, event ID 1000 appears. To fix this issue, you can perform a clean boot.
- Input msconfig to the Run dialog box and press Enter.
- Click Selective Startup and uncheck Load startup items.
- Under the Services tab, click the Hide all Microsoft services option and choose Disable all.
- Click OK and restart your PC.
The End
Have you experienced the event ID 1000 application error when an application crash in Windows 10/8/7? Now, almost all the possible methods are here. Just try them to fix Windows event ID 1000 and let your program run properly.
About The Author
Position: Columnist
Vera is an editor of the MiniTool Team since 2016 who has more than 7 years’ writing experiences in the field of technical articles. Her articles mainly focus on disk & partition management, PC data recovery, video conversion, as well as PC backup & restore, helping users to solve some errors and issues when using their computers. In her spare times, she likes shopping, playing games and reading some articles.
-
Home
-
Partition Manager
- How Can I Fix the Event 1000 Application Error on Windows 10
By Ariel | Follow |
Last Updated
Have you come across the Event ID 1000 application error on Windows 10? It is an great inconvenience that you can’t launch some programs due to the error. In today’s article, MiniTool will walk you through 4 effective troubleshooting methods.
What Causes the Event ID 1000 Error on Windows 10?
When some certain applications get crashed, you may notice the error message of Event ID 1000 application error in Event Viewer log. You won’t be able to run some specific programs as normal once the error occurs.
What causes the application error 1000 on Windows 10? According to users’ reports, there are several possible reasons for the error that we summarize as follows:
- Corrupted system files: It should be the first factor that leads to Event ID 1000 error. This is because Windows components might crash due to the corrupted system files.
- Improperly installed .NET Framework: It is required by Numerous applications and Windows to work properly. If the framework gets corrupted or installed badly, you will find the Event ID 1000 Windows 10 error.
- Outdated Windows: It is another common reason that you encounter the error. Installing the latest Windows updates might fix the issue.
- The specific applications crashing: You can perform a clean boot to check which app is crashing on your computer and reinstall it.
Now, let’s see how to fix the Event ID 1000 error on Windows 10. Please keep reading the following context carefully.
Fix 1. Run System File Checker
System File Checker is the most common tool to scan the corrupted system files and repair them. To get rid of Event 1000 application error, you can run an SFC scan. Here’s how to do that:
Step 1. Type command in the search box, and then right click the Command Prompt from the top result and select Run as administrator.
Step 2. In the elevated Command Prompt, type sfc /scannow command and hit Enter. After that, this tool will scan and repair the corrupted system files. This process will take you some time and make sure that it completes.
Tip:You can run the DISM.exe /Online /Cleanup-image /Restorehealth command to fix the issues related to system files.
Fix 2. Perform a Clean Boot
As mentioned above, the specific applications also responsible for the application error 1000 on Windows 10. In order to diagnose which app is causing the error, you can perform a clean boot. After you identify the specific application, you can reinstall it from the trusted website.
If you don’t know how to perform a clean boot, please read this post in where detailed steps are provided.
Fix 3. Check for the Latest Updates for Your Windows
As is well known, Microsoft will release some new features and fixes on a regular basis. These updates probably can get rid of some bugs like Event 1000 application error. So, you can try installing the latest Windows updates.
Step 1. Type update in the search box and select Check for updates from the context menu.
Step 2. In the pop-up window, click on the Check for updates option on the right side. After the installation completes, you can check if the Event ID 1000 error is fixed or not.
Fix 4. Reinstall Microsoft NET Framework
If all the above methods fail to work, you may consider reinstalling the NET Framework. It is an essential part for some applications. The Event ID 1000 error may occur due to the Framework version. To reinstall it smoothly, please follow the steps below:
Step 1. Press Win + R keys to open the Run dialog box, and then type appwiz.cpl in the box and hit Enter.
Step 2. In windows 10, you need to click the Turn Windows features on or off to open the Windows Features.
Step 3. Expand the listed NET Framework components here and deselect all the checkboxes.
Step 4. Click here to download the NET Framework Cleanup Tool to your Windows.
Step 5. Extract the tool in File Explorer, and then open the NET Framework Cleanup Tool window and click on the Cleanup Now button.
Step 6. Restart your computer to apply this operation, and then click here to download 4.7 version NET Framework and install it on your computer.
After that, you can see if the Event ID 1000 Windows 10 error still persists.
About The Author
Position: Columnist
Ariel has been working as a highly professional computer-relevant technology editor at MiniTool for many years. She has a strong passion for researching all knowledge related to the computer’s disk, partition, and Windows OS. Up till now, she has finished thousands of articles covering a broad range of topics and helped lots of users fix various problems. She focuses on the fields of disk management, OS backup, and PDF editing and provides her readers with insightful and informative content.
Readers help support Windows Report. We may get a commission if you buy through our links.
Read our disclosure page to find out how can you help Windows Report sustain the editorial team. Read more
The Event ID 1000 application error is included in the Event Viewer log when applications crash.
Thus, you can’t launch the required program when the error occurs, or the software might unexpectedly close. As one would expect, numerous culprits can be behind this anomaly, and many programs can fall victim to it.
From games to collaboration apps and even random processes, nothing is untouchable for the application error 1000.
Let’s take a closer look and see exactly what to expect.
What causes the application error?
- Malware – The presence of malware or a virus on your machine may also have caused this Event ID. A thorough antivirus software scan usually fixes the issue.
- Older Windows – Having an older version of Windows installed on your PC could also cause your problem. Installing the most recent one immediately resolves the problem.
- Crashing of a particular application – If you encounter the error message, it could also be because of a specific application crashing on your PC. You can determine it by performing a clean boot or looking at the file path in the event.
- Corrupt system files – The most common reason why you encounter the Event ID 1000 is corrupt system files. Some Windows components may crash and cause problems with the system if you have damaged system files or missing modules.
- .NET Framework improperly installed – Windows and many other apps use.NET framework to function. The Event ID 1000 will appear in the event logs if the framework is wrongly installed or contains faulty files.
Where can the event ID 1000 error be found, and what does it look like?
- Servers: Event ID 1000 application error Windows Server 2019/Windows Server 2012 R2/Windows Server 2016
- Application error Event ID 1000 Task Category 100 (also hound under this form: Event ID 1000 Task Category: (100)
- Apps: Excel Event ID 1000, Event ID 1000 0xc0000005 Outlook error
- DLL files (Event ID 1000 ntdll/kernelbase dll)
- Other: Netge-1000 error, Event ID 1000 NET Runtime, Ereignis ID 1000, Halo Infinite Event ID 1000)
- Across all Microsoft-owned OS versions: Event ID 1000 on Windows 7, 10, and even 11
If the Event ID 1000 error is a frequently occurring one on your Windows desktop or laptop, these are a few resolutions that might fix it.
How can I fix Event 1000 application errors for good?
1. Run a System File Checker scan
- Press the Window key + X, and click Command Prompt (Admin).
- First, input the following line, and press Enter:
DISM.exe /Online /Cleanup-image /Restorehealth - Then you can enter the script below in the Command Prompt and press the Enter key.
sfc /scannow
- Expect the scan to take about half an hour.
- Restart Windows if the scan repairs system files.
Corrupt system files are a probable source for the Event ID 1000 application error. As such, the System File Checker could feasibly resolve the issue.
System File Checker is a Windows utility that scans for corrupted WRP system files and repairs them. Restoring the corrupted files of your Windows 10/11 computer can help you fix other issues like Event ID 5858; to learn more, read this guide.
Additionally, you can use specialized repair software to handle this task automatically and risk-free.
2. Update Windows drivers
Outdated drivers can be another factor behind Event ID 1000 errors, so updating and fixing them is your go-to solution.
We recommend you use a reliable third-party tool to handle outdated, broken, or missing drivers, and it won’t take up your system’s resources.
3. Clean boot Windows
- Press the Windows Key + R to open the Run accessory.
- Then you can input msconfig in the Run dialog.
- Select the Selective startup option on the General tab, select both the Load system services and Use original boot configuration options, and deselect the Load startup items check box.
- Then select the Services tab, click the Hide all Microsoft services option, and press the Disable all button.
- Then press the Apply and OK buttons.
- Press the Restart button to reboot Windows.
Software conflicts can often crash programs. So, a clean boot might help fix Windows’s Event ID 1000 error. That boots Windows with minimal startup software and drivers.
5. Reinstall Microsoft NET Framework
- First, open the Run accessory using Windows + R, input appwiz.cpl in Run’s text box, and hit Enter.
- Note that earlier Windows platforms include Microsoft NET Framework on the Uninstall or change a program list.
- If you can see Microsoft NET Framework listed there, select it and press the Uninstall button.
- In Windows 10, you’ll need to go to Start and search the Turn Windows features on or off to open the window in the snapshot below.
- Expand the listed NET Framework components listed there and deselect all their checkboxes.
- Next, navigate to the NET Framework Cleanup Tool‘s page and click Download.
- Open the NET Framework Cleanup Tool ZIP in File Explorer, and press the Extract all button to extract it.
- Open the NET Framework Cleanup Tool’s window, and press the Cleanup Now button.
- Then restart the PC.
NET Framework is a development framework that is essential for some software. So the Event ID 1000 error can be due to a NET Framework version that needs fixing.
Thus, reinstalling NET Framework is another resolution for the Event ID 1000 error.
Before reinstalling NET Framework 4.7, check out the Microsoft NET Framework Repair Tool. That’s a utility that fixes NET Framework issues, so it might also resolve Event ID 1000 errors.
6. Reinstall the software
- Run with the Windows+ R hotkey, then input appwiz.cpl in Run, and press the OK button.
- Then select the program that is crashing, and press the Uninstall button.
- Restart Windows before reinstalling the program.
- Reinstall the latest version of the software.
How do I fix the Event 1000 application error in Windows 11?
While this is a problem common in Windows 10, users of the new Microsoft OS have also experienced the same issues.
The good news is that if you have followed our guide, you can also solve the Event 1000 application error issues in Windows 11.
This is because OSs are very similar, and except for minor UI differences, the recommended fixes should work on Windows 11.
Those resolutions might fix the event 1000 application error within various Windows platforms.
Users have experienced different variations to this error message, including event ID 1000 kernelbase.dll, event ID 1000 and 1001, event ID 1000 0xc0000005, Task Category: (100), explorer.exe, and excel.
Regardless of the variation, the solutions recommended should be helpful. We also have a great guide on the DistributedCOM Event ID 10016 message, so don’t miss it.
If you have any other suggestions or questions, don’t hesitate to leave them in the comments section below, and we’ll be sure to take a look.
Matthew Adams
Windows Hardware Expert
Matthew is a freelancer who has produced a variety of articles on various topics related to technology. His main focus is the Windows OS and all the things surrounding it.
He is passionate about the tech world, always staying up-to-date with the latest and greatest. With an analytical view, he likes problem-solving, focusing on errors and their causes.
In his free time, he likes to read and write about history and tries to always develop new skills.